Uploaded February 2025 | Updated November 2026, 2 hours ago
The snow plow I made in videos number 219 to 224 (see below) has been working very well, but the machine tends to be unbalanced by the front weight. Traction on the rear axle is the concern. So I make a ballast to install in the back. It must be removed quickly, as the plow is often removed throughout winter.
Part 1 youtu.be/w34d8dqQ_Dc
Part 2 youtu.be/WD_cpFl4CZ4
Part 3 youtu.be/svsiXMhEXoA
Part 3½ youtu.be/JwGoS9kQfog
Trial youtu.be/TNeqRx10lTM
In full action youtu.be/R3ua7l37k8s
The snow plow I made in videos number 219 to 224 (see below) has been working very well, but the machine tends to be unbalanced by the front weight. Traction on the rear axle is the concern. So I make a ballast to install in the back. It must be removed quickly, as the plow is often removed throughout winter.
Part 1 youtu.be/w34d8dqQ_Dc
Part 2 youtu.be/WD_cpFl4CZ4
Part 3 youtu.be/svsiXMhEXoA
Part 3½ youtu.be/JwGoS9kQfog
Trial youtu.be/TNeqRx10lTM
In full action youtu.be/R3ua7l37k8s










