Uploaded October 2017 | Updated November 2026, 2 hours ago
A detailed view of my first dimethicone test with a fluid acrylic dirty pour. The result? CELLS galore!! See what I used, the cell-filled pour, and how I added beautiful, lacy edges for a wonderful effect.
To see products I use, love and recommend for fluid painting (and to possibly discover new products 😊) :
amazon.com/shop/MyriamsNature
If you would like to help me buy supplies for these videos here is a link: PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.
-=- Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: amzn.to/2fvgYF0
-=- For this painting I used all Artist's Loft acrylic paints from Michaels...
Brilliant Magenta
Yellow
Turquoise
Neon Green (with a little white mixed in)
I used Artist’s Loft Flow Acrylic White for the negative space.
-=- This is my usual formula for all the paint:
- 1 - 2 parts paint to 5 parts Floetrol
- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
- Ordinarily, right before I prepare my dirty pour, I add a few drops (3 to 6 drops) of silicone into each color EXCEPT the white (or whatever negative space color you choose). The fact that the white has no silicone encourages the other colors to bleed into the white and "cell" up.
In this painting I used a dimethicone hair serum as a replacement for silicone oil : amzn.to/2z0Oknw
-=- When I do use silicone, my favorite is "3 in1 All Temp Silicone", available at most hardware stores. You can also get it here: amzn.to/2fyKPwr
The reasons I prefer it are:
- because it dries .... leaves virtually no oily residue once a painting has dried
- has no fumes like the spray silicones
- comes in a super convenient applicator bottle (with a cap that stays attached!)
But, any silicone you have should get you cells.
-=- This was done on an 8 x 8 inch canvas panel ... The dirty pour was 60 ml (2 ounces) and I spread about 10 ml of white paint on the canvas to wet it down before the pour.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕
A detailed view of my first dimethicone test with a fluid acrylic dirty pour. The result? CELLS galore!! See what I used, the cell-filled pour, and how I added beautiful, lacy edges for a wonderful effect.
To see products I use, love and recommend for fluid painting (and to possibly discover new products 😊) :
amazon.com/shop/MyriamsNature
If you would like to help me buy supplies for these videos here is a link: PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.
-=- Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: amzn.to/2fvgYF0
-=- For this painting I used all Artist's Loft acrylic paints from Michaels...
Brilliant Magenta
Yellow
Turquoise
Neon Green (with a little white mixed in)
I used Artist’s Loft Flow Acrylic White for the negative space.
-=- This is my usual formula for all the paint:
- 1 - 2 parts paint to 5 parts Floetrol
- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
- Ordinarily, right before I prepare my dirty pour, I add a few drops (3 to 6 drops) of silicone into each color EXCEPT the white (or whatever negative space color you choose). The fact that the white has no silicone encourages the other colors to bleed into the white and "cell" up.
In this painting I used a dimethicone hair serum as a replacement for silicone oil : amzn.to/2z0Oknw
-=- When I do use silicone, my favorite is "3 in1 All Temp Silicone", available at most hardware stores. You can also get it here: amzn.to/2fyKPwr
The reasons I prefer it are:
- because it dries .... leaves virtually no oily residue once a painting has dried
- has no fumes like the spray silicones
- comes in a super convenient applicator bottle (with a cap that stays attached!)
But, any silicone you have should get you cells.
-=- This was done on an 8 x 8 inch canvas panel ... The dirty pour was 60 ml (2 ounces) and I spread about 10 ml of white paint on the canvas to wet it down before the pour.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕
![185] How to PLAN a Resin Bangle Bracelet 🌸 Avoid Damaged or Sinking Flowers 🌼 Resin Jewelry
In this tip filled tutorial, I share my fun, problem-free technique for making resin flower bangle bracelets. Following these steps, you’ll never have blooms changing position, sinking to the bottom, or breaking as you create. You’ll be able to use some of these techniques in other resin jewelry. 😃 Oh and by the way, the molds used in this tutorial are outstanding! 😊
🎥 To see why I think Little Windows bangle molds are the best I’ve used : https://youtu.be/BSIjf7lHLFA
🎥 To see Fran from Little Windows explain an easy way to make any of the bangle shapes she carries round, if you prefer : https://www.youtube.com/watch?v=a7txrr7Cj7c
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP:
https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
https://facebook.com/MyriamsNature
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist : http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
MATERIALS and TOOLS Used
————————————————-
🔺 Little Windows MOLDS : http://bit.ly/LWMolds
🔺 Little Windows RESIN : http://bit.ly/LWResin
🔴 Use the coupon code MYRIAMSNATURE for 15% off your entire Little Windows order
🌸 3 sets of real, dried, PRESSED FLOWERS - 3 sets : https://amzn.to/3oVmOAP
🌸 3 boxes of SMALL, real, dried FLOWERS in several colors (132 blooms) ... includes tweezers : https://amzn.to/3mpmKaM
These are just 2 of MANY flower options.
NOTE: Given the huge number of vendors selling dried flowers, I recommend picking from vendors that have Amazon doing their shipping (and that allow free returns in case you want to make changes.)
▪️One ounce (30ml) MEDICINE CUPS,: https://amzn.to/2KN0SUC
▪️Curved TWEEZER options : https://amzn.to/2PXNJ3c
Another low viscosity resin option:
🔹Liquid Diamonds : http://bit.ly/LDResin (case sensitive)
🔵 Use the coupon code MYRIAM for 20% off your entire order from the Epoxy Resin Store
DISCLOSURE : As an Amazon affiliate, I earn from qualifying purchases. Links above to Amazon products help this channel by giving me a small commission when one is used before ANY purchase. Your prices remain exactly the same 😁.
Thank you in advance for reading this and for watching these videos! May the inks, resin and paints be kind! 😊💕 185] How to PLAN a Resin Bangle Bracelet 🌸 Avoid Damaged or Sinking Flowers 🌼 Resin Jewelry](https://i.ytimg.com/vi/Nmf1-TlI-iM/mqdefault.jpg)
![176] Resin Flower Art 😱 Large Coaster Didn’t Go As Planned - ColourArte Rezin Arte & Let’s Resin
This epoxy resin flower almost didn’t happen because the resin was curing by the time I started to use it... so I attempted to save it. Did I succeed at making something worthwhile, or is it a fail?
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP:
https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
To inquire about purchasing a piece you’ve seen me make, feel free to send me a message via my page:
https://facebook.com/MyriamsNature
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE, extra videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist : http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Alcohol Ink, Resin & Acrylic Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
➖➖➖➖➖➖➖➖➖➖➖➖
🎨 MATERIALS USED 🎨
▪️CLEARCAST 7050 resin : http://bit.ly/CC7050 (case sensitive)
— 45 minute work time
— virtually odor free, VOC free & non-toxic
— cures rock hard and crystal clear
— resists yellowing and contains UV absorbers
♦️ Use coupon code MYRIAM at checkout for 20% off your TOTAL purchase ♦️
To see other resins by the same manufacturer, the Epoxy Resin Store : http://bit.ly/GetResin (case sensitive)
▪️Rezin Arte Luster Pigment - Belize Blues : https://amzn.to/2EfnhMx
▪️Rezin Arte Luster Pigment - Mystic Primrose : https://amzn.to/2FL27qh
▪️REZIN ARTE Luster pigments on ColourArte.com (same price as Amazon) : https://www.colourarte.com/product-categories/rezin-arte-luster-pigments-dry-paint-epoxy-2/
◾️JACQUARD PIÑATA Blanco Blanco (White)
- 1/2 ounce (14 ml): http://bit.ly/BlancoBlanco14ml
- 4 ounces (118 ml): http://bit.ly/BlancoBlanco4oz This is a much better deal, it’s like getting 8 small bottles for less than the price of 4
▪️ Blanco Blanco on Amazon: https://amzn.to/2IBLKIn
You might also like:
◾️MARABU Alcohol Inks
🔹The SET of all 14 NEW Marabu alcohol ink colors (metallics, glitter and neons): http://bit.ly/Marabu14
🔹The ORIGINAL set of 28 : http://bit.ly/MarabuInk—All28
🔹ALL the colors INDIVIDUALLY (NEW colors at the TOP of the list) : http://bit.ly/MarabuInksNew
➖➖➖➖➖➖➖➖➖➖➖➖
🛠 TOOLS 🛠
▪️Set of 3 large molds (square, round, heart) : http://bit.ly/3LargeMolds
♦️ Use coupon code MYRIAM10 for 10% off your TOTAL purchase ♦️
— on Amazon : https://amzn.to/32Uw9ks
▪️6” round silicone molds - set of 5 : https://amzn.to/339CA1I
▪️ Silicone mixing cups with spout (3.3 oz./100 ml) - set of 5 : https://amzn.to/2DdLaDX
▪️ Little (10 ml) silicone cups with spout and handle :
— Pack of 8 : https://amzn.to/2Fb27zG
— Pack of 15 (better deal): https://amzn.to/33dNgMO
▪️ SET of three 3.3 oz/100ml silicone cups AND five 10 ml cups (plus other little extras): https://amzn.to/2JqzpdI
▪️One ounce (30 ml) medicine cups : https://amzn.to/2KN0SUC
▪️Mini pipettes :
- set of 100 : https://amzn.to/31nuiCm
- set of 200 (better deal) : https://amzn.to/3gu6GTf
▪️Small metal spoon -
pack of 1, very inexpensive price but will take 4 - 6 weeks to arrive: https://amzn.to/2FlGfkF
▪️Small metal spoons/stirrers - set of 4, regular Amazon shipping : https://amzn.to/3bIWdlk
▪️Popsicle sticks... the best price for these is at your local dollar store 😊.
💕😊 Thank you in advance for helping out by watching and sharing these videos! May the alcohol inks, paints and resin be kind, and may the pours be with you. 176] Resin Flower Art 😱 Large Coaster Didn’t Go As Planned - ColourArte Rezin Arte & Let’s Resin](https://i.ytimg.com/vi/OzH94037bwI/mqdefault.jpg)
![21] MAKING CHANGES to your DIRTY POUR fluid acrylic painting!
Sometimes a pour is too boring, too loud, too muddy, etc. ... just not what youd hoped for. Learn to transform it and make it just what you want! This step by step walk through shows you how I completely changed a pour by using handy inexpensive tools. Learn how to save paint, remove sections of a pour, AND to have creative fun boosting the details of your painting!
To see products I use, love and recommend (and to see pouring products already grouped in one place 😊) :
https://www.amazon.com/shop/myriamsnature
If you would like to help me buy supplies for these videos here is a link: https://PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, varnish designed for acrylics, oils and watercolors. It gives a glossy finish. Here is a link: http://amzn.to/2jGh3KO
When I want a matte/satin finish instead, I use this spray: http://2fvgYF0
For this painting I used :
Decoart MEDIA Fluid Acrylic - Hansa Yellow Lighht
Artist’s Loft paints:
- Flow Acrylic White for the negative space and in the dirty pour
- Flow Acrylic Neon Green
- Brilliant Blue
- Brilliant Magenta
This is my formula for all the paint:
1 part paint to 5 parts Floetrol (but 2 parts paint to 5 parts Floetrol works well too)
I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. I always try to limit the amount of water that I use ... too much will break down the binding properties of the acrylic paint. How much is too much? I try to keep the amount of water under 50% of the amount of paint.
There was a drop or two of silicone in the green, blue and yellow but not in the white or magenta.
My favorite silicone is 3 in1 All Temp Silicone, available at most hardware stores.
This was done on an 8x10 inch canvas and the pour utilized no more than 80 ml of the paint/Floetrol mix (under two ounces).
The bottle I used for the white paint in this video is one I got through eBay ... It came in a pack of 5 for $3.20 (that includes shipping). Each bottle comes with 7 different tips in different widths that you can easily change out with paint still in the bottle. Search for this exact phrase : 5 pcs squeeze bottles with nozzles. Itll take just about 3 weeks to get them (coming from China).
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 21] MAKING CHANGES to your DIRTY POUR fluid acrylic painting!](https://i.ytimg.com/vi/PRL2yyGoc4s/mqdefault.jpg)
![108] Acrylic Pour a BEACH - Easy DIP Technique - 2 Fluid Art Test Paintings
While working on an all metallic acrylic dip I got a maybe crazy idea ... could I dip an abstract beach? Watch and tell me what you think. There are two different test pieces in this one... and one got dipped a few times!
🎥 The piece that sparked the idea : https://youtu.be/Kl7MUiTALcg
🎥 Part 2 of his video : https://youtu.be/BjORbLUnDIo
Join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨
https://facebook.com/MyriamsNature http://instagram.com/Myriams_Nature
SOME EASY WAYS TO HELP KEEP VIDEOS COMING :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PIECE I USED :
▪️ All DecoArt Paints :
Americana Titanium White
Extreme Sheen 24k Gold
Extreme Sheen Sapphire
Extreme Sheen Rose Gold
Extreme Sheen Aquamarine
A set of 18 Dazzling Metallic colors: https://amzn.to/2TEuEP8
For regular colors, I recommend DecoArt Americana paints because they are nicely pigmented, perform beautifully, are readily available and well priced.
A sampler pack of 18 popular colors: https://amzn.to/2UWSQxp
A Premium version of this paint comes in 2.5 oz tubes... here is the Titanium White (as an example): https://amzn.to/2UV3CEk
▪️DecoArt Pouring Medium ...
16 oz: https://amzn.to/2F5jsDV
64 oz: https://amzn.to/2E9X7I9
This is my pouring medium of choice because it mixes very easily into paint, prevents cracking and crazing, and it promotes cells.
(See mixing formula below)
▪️Floetrol (for cost savings): https://amzn.to/2H96pWP
▪️Small, one ounce squeeze bottles
— for a pack of 6: https://amzn.to/2qNs517
— for a pack of 12: https://amzn.to/2qLBrKs
▪️Silicone brush set (great for resin too! )
Set of 6: https://amzn.to/2CxtSxI (shipped immediately by Amazon)
Same set at half the price, but will take a couple of weeks to receive :
https://amzn.to/2HAgbSN
————————————————
PAINT MIXING
- I add roughly 1 part paint to 2 - 3 parts Pouring Medium
(This is my usual formula for thinning all the paint if using Floetrol as well.)
I eyeball amounts because having the same consistency/thickness for each of your mixed paints is more important than the ratios of medium to paint.
ALL of my paints (all the pouring colors as well as whatever negative space color I might use) are mixed to the same consistency using the formula above and adding tiny bits of water as, and IF, needed.
- When adding water, the goal is to get my paint to the consistency of warm honey. The amount of water will depend on the type of acrylic paint ... Flow acrylic (runny like syrup) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more. Try to limit the amount of water that you use to under 25% of the amount of paint ... too much water will break down the binding properties of the acrylic paint. Ideally NO water is preferable but adding a little will be ok.
SEALING / VARNISHING
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors.
It gives a glossy finish: http://amzn.to/2jGh3KO
For a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
If you prefer to brush on your varnish, I highly recommend Miniwax Polycrylic for its ease of use, high shine and lack of brush marks: https://amzn.to/2Gr3PMp
This was done on three 5x7 inch canvas panels.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 108] Acrylic Pour a BEACH - Easy DIP Technique - 2 Fluid Art Test Paintings](https://i.ytimg.com/vi/PZzIc0NDXtA/mqdefault.jpg)
![146] ALCOHOL INK : Painting & Embellishing Tutorial - Masterpiece Hardcore Alcohol Ink Art Panels
How to use alcohol inks and glitter for a Christmas art project. This painting tutorial is full of alcohol ink techniques for beginners and advanced artists. We’ll use Marabu inks, masking fluid, a different surface... we’ll also talk about composition & the Golden Ratio! Pull up a chair and stay awhile... there’s a lot to do 😄.
For tips, ideas, help & more, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
http://instagram.com/Myriams_Nature
https://facebook.com/MyriamsNature
EASY WAYS TO TAKE PART IN GETTING VIDEOS MADE :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
How to make the grid for the Golden Ratio on any rectangular canvas size:
- Determine the length and height of your canvas
- Divide the length (the long side of your canvas) by 1.618
- Mark off that resulting measurement from left to right AND from right to left along the long side of your canvas
- Draw vertical lines at those two points
- Divide the height of your canvas by 1.618
- Mark off that resulting measurement from top to bottom AND from bottom to top along the short side of your canvas
- Draw horizontal lines at those two points
- Your grid is now complete 😊
- (For a square canvas you only have to do the division once and use the result for both sides of the canvas 😉)
FOR THIS PROJECT I USED:
➖➖ MATERIALS ➖➖
◾️ MARABU Alcohol Inks...
▪️The full set of 28 : http://bit.ly/Marabu28
▪️To buy the colors individually: http://bit.ly/MarabuInks
◼️ MASTERPIECE Alcohol Ink Panels
▪️in smaller sizes : http://bit.ly/MasterpiecePanels1
▪️in wide range of sizes : http://bit.ly/MasterpiecePanels2
▪️for Golden Ratio sizes go directly to Masterpiece
◾️ELIZABETH CRAFT glitter (the best GLITTER I’ve ever used) : http://bit.ly/ECGlitter ✨
🛑 — Use coupon code MYRIAM for 20% off your entire order from this site! 😁 (This can be used once per customer).
▪️ Speedball Mona Lisa Adhesive Size : https://amzn.to/2RW9FZ1
▪️ Scor Tape double sided adhesive 1/8” wide : bit.ly/ScorTape1-8
▪️99% Isopropyl Alcohol (best price I’ve found online) : https://amzn.to/2JalfwK
➖➖ TOOLS / SUPPLIES ➖➖
▪️FINELINE 20 gauge Masking Fluid Applicator “Pen” & Fluid : https://amzn.to/2PpuP0S
▪️Dotting / Ball STYLUS sets of 10 : https://amzn.to/2YrNP2U and https://amzn.to/341xJyX (compare prices... they change)
▪️Set of 20 inexpensive paintbrushes in sizes useful for alcohol inks : https://amzn.to/2ru6EGt
▪️Tiny detail PAINTBRUSHES ......
Choose the pack you prefer : https://amzn.to/2sTMhTu
▪️MICROBRUSHES:
— 400 in 4 sizes & colors: https://amzn.to/2zW2o6l
—100 in 1 size & color :
https://amzn.to/31i5J8k
▪️10 ml NEEDLE-tip BOTTLES - pack of 20 : https://amzn.to/2y4wMay
▪️100 silicone tattoo ink cups (the tiny silicone cups that held my ink as I painted) : https://amzn.to/31uHLHe
▪️ PLASTIC PALETTES:
— Pack of 3 rectangular with 6 wells each : https://amzn.to/2V8oeg9
— Pack of 3 round with 10 wells each : https://amzn.to/2VV2C3R
➖➖ SEALING / VARNISHING ➖➖
▪️Kamar Varnish (seals alcohol ink without bleeding, blooming or reactivating the inks) : https://amzn.to/2Evyv9N
▪️ AFTER using Kamar, you may choose to add a layer of UV Resistant Acrylic as well for added protection: https://amzn.to/2JisymO
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 146] ALCOHOL INK : Painting & Embellishing Tutorial - Masterpiece Hardcore Alcohol Ink Art Panels](https://i.ytimg.com/vi/QCXhbsszpuY/mqdefault.jpg)
![41] STRETCHING a Dirty Pour SWIRL even further! Tips & more - Fluid Acrylic painting
Wonder what would happen if you moved the cup while doing the swirl (tree ring) dirty pour. I tried it in the video before this one but wanted to stretch it even more. The result was a fun pour with interesting challenges.
💥 For fun, TIPS, tricks, IDEAS, help & ADVICE, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨
SOME EASY WAYS TO KEEP VIDEOS COMING (and/or say “thank you” 😊💕)
🔹 Sponsor this channel with a contribution: https://www.PayPal.me/MyriamsNature
🔶 Or become a monthly patron and earn EXCLUSIVE rewards (like free digital art downloads, access to extra videos made ONLY for patrons, behind the scenes looks and more!) 😄🎉: https://www.patreon.com/myriamsnature
I thank you in advance for being a part of the team.
🔹 If you prefer tangibles, this is my Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
For this painting I used all Artists Loft paints
Here is an eBay link for the blue-nozzle little squeeze bottles I use... they take a while to get but they’re too pricey on Amazon : goo.gl/LMC6Uf
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: http://amzn.to/2jGh3KO
When I want to spray a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
This is my usual formula for all the paint:
- 1 - 2 parts paint to 4 parts Floetrol
- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.
This was done on a 5 x 17 inch piece of gessoed plywood.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 41] STRETCHING a Dirty Pour SWIRL even further! Tips & more - Fluid Acrylic painting](https://i.ytimg.com/vi/QwlLv3SnDaw/mqdefault.jpg)
![112] 3-Way RESIN Art Collab with Tammy Anderson & Sharon Lindley : The Challenge? BUBBLES!!
I walk you step by step in making this multimedia resin art piece for a super fun collab with Youtube gal pals Sharon Lindley and Tammy Anderson. This turned out better than I’d hoped and I LOVE it... I hope you will too! 😊💕
🎥 Sharon Lindley’s video: https://www.youtube.com/watch?v=vhl7AIBFLi0
🎥 Tammy Anderson’s video: https://www.youtube.com/watch?v=fC6Jm0ZO2vE
💥 For fun, TIPS, tricks, IDEAS, help & ADVICE, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨
https://facebook.com/MyriamsNature
SOME EASY WAYS TO HELP KEEP VIDEOS COMING :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PIECE I USED :
▪️ CLEARCAST 7050 resin
— great price for this amazing quality
— 45 minute work time, 8 hours for a touchable cure, 24 hours for a rock hard cure
— virtually odor free, VOC free, non toxic
— crystal clear with long-term protection against yellowing
— technical support from resin experts, not sales people
[🛑💰Go direct to the manufacturer like I do : http://www.theepoxyresinstore.com
Enter coupon code MYRIAM at checkout for 10% off your TOTAL purchase ]
On Amazon (regular price): http://amzn.to/2y0giSe
▪️12” embroidery hoop - set of 3 : https://amzn.to/2GeA1QL
▪️12” embroidery hoop - set of 6 : https://amzn.to/2G2A4yK
▪️12” Wood Circle Cutouts - pack of 3 : https://amzn.to/2WYSdEI
▪️21 piece small wood circle cutouts : https://amzn.to/2GcEOmT
▪️White chalk pencils : https://amzn.to/2Z2a0wp
▪️ Sizzix Sidekick Diecutting Machine : https://amzn.to/2X2PmKN
🔹 For all die-cutting links (with pictures) go to my “kit” on Kit.com : https://kit.co/MyriamsNature/small-die-cutting-for-embellishments
For MIXING RESIN in THIS video:
▪️ My favorite silicone mixing cup (100 ml ... roughly 3.3 oz) with spout: http://amzn.to/2FU8xyc
🔺 For Canadians : https://amzn.to/2r7kGdc
For larger quantities of resin
▪️Set of 2 (1cup/8 oz/250 mL and 2cup/16 oz/500 mL) = https://amzn.to/2McEwx7
🔺For Canadians: https://amzn.to/2l5DrLv
These cups are endlessly reusable! I let remaining resin cure in them overnight and it then easily pops out! The cups are very flexible and have totally smooth curved inner bottoms (perfect for thorough mixing!).
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 112] 3-Way RESIN Art Collab with Tammy Anderson & Sharon Lindley : The Challenge? BUBBLES!!](https://i.ytimg.com/vi/RQT9faMP6C4/mqdefault.jpg)
![50] Resin & Acrylic Galaxy Tutorial - Mica Nebula + Dirty Pour Planets - Tips & Techniques
For my very first YouTube video, I made a resin nebula with an acrylic background and mica powders ... for THIS video (my 50th) I wanted to improve on that otherworldly look and add fluid acrylic pouring to the mix. Ive taken advantage of the layering thats possible with resin to make a really 3D galaxy.
This video is full of tips, step-by-step instruction, a dirty pour swirl and sparkly goodness! (giggle)
‼️ 💥 For fun, TIPS, tricks, IDEAS, help and ADVICE, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there!! ✨‼️
Check out my friend Michaels amazing channel - - - MKL GRM Fine Art : https://www.youtube.com/channel/UCT9nYZ9HbDaU2xnUDsu79Rw
😊💕
His remarkable, humongous acrylic pour of the world map... The WHOLE world map!! https://youtu.be/uaN1qb4TMKY
💠 - UPDATE - Michael posted his response to the challenge ... check it out for even more ideas! 😉💕 https://www.youtube.com/watch?v=3tziQ7kcsYM 💠
———————————————
✨✨ https://facebook.com/MyriamsNature ✨
SOME EASY WAYS TO KEEP VIDEOS COMING (and/or say “thank you” 😊💕)
🔹 Sponsor this channel with a contribution: https://www.PayPal.me/MyriamsNature
🔶 Or become a monthly patron and earn EXCLUSIVE rewards (like free digital art downloads, access to extra videos made ONLY for patrons, behind the scenes looks and more!) 😄🎉:
Patreon.com/MyriamsNature
I thank you in advance for being a part of the team.
🔹 If you prefer tangibles, this is my Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THIS PIECE I USED :
▪️ CLEARCAST 7050 resin
— unbeatable price for such a high caliber resin
— 45 minute work time, 8 hours for a touchable cure, 24 hours for full cure
— virtually odor free, VOC free and non-toxic
— cures rock hard and crystal clear
— ✨ ANTI-YELLOWING protection (HALS) & UV absorbers ✨
🛑💰Go direct to the manufacturer like I do :
http://bit.ly/CC7050 (case sensitive)
Enter coupon code MYRIAM at checkout for 20% off your TOTAL purchase
For their other resins — Epoxy Resin Store : http://bit.ly/GetResin (case sensitive)
▪️ Perfect Pearls mica powders: http://amzn.to/2xZSeyq and http://amzn.to/2xZM69u
▪️ Artists Loft Iridescent Medium and Flow Acrylic Black (but ANY black paint and white (or twinkly) paints you have will work!)
▪️ Miscellaneous paints for the acrylic skins
▪️ Eye shadow mica powders (ordered from eBay ... They will take a couple of weeks to receive since they come from China) : https://ebay.to/2FXfiiK
(They are LESS than a dollar each!! And that INCLUDES shipping!! Seriously, I LOVE them!)
▪️ Super sparkly white mica (larger particle size than Perfect Pearls)... this was a gift but will hunt down a source.
▪️ This was done on a shallow wooden frame/canvas available from Michaels.com : https://goo.gl/3dod3Q
For MIXING RESIN in THIS video:
▪️ My favorite silicone mixing cup (100 ml) with spout: http://amzn.to/2FU8xyc
▪️ 30 ml medicine cups: http://amzn.to/2yYE92E
▪️ Ziplock bags are available in just about any size you need... For this small canvas, I used 1x2 bags. Typical sizes are also 2x2, 2x3, 3x5. If you need larger quantities, using a cup might be as easy or easier.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 50] Resin & Acrylic Galaxy Tutorial - Mica Nebula + Dirty Pour Planets - Tips & Techniques](https://i.ytimg.com/vi/RWACMicNGug/mqdefault.jpg)
![20] SAVE paint & IMPROVE your DIRTY POUR fluid acrylic painting! Acrylic Pouring Tutorial
Tip-filled Acrylic Pouring tutorial : shows you how to prep, measure, & enhance a flip cup dirty pour full of cells and creative personal touches! Learn how to save paint, successfully use canvas panels, AND to have creative fun boosting the details of any pour for a beautiful result. Go beyond the pour and take control of your painting! 😊
For fun, tips, tricks, ideas, help & more, join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe
https://facebook.com/MyriamsNature 😊
EASY WAYS TO KEEP VIDEOS COMING (and/or say “thank you” 😊💕)
🔹Sponsor this channel with a contribution: https://www.PayPal.me/MyriamsNature
I thank you in advance for being a part of the team that makes this channel possible.
🔹If you prefer contributing in another way, this is my Amazon WISHLIST to improve my channel (more videos, more often, more discoveries) [Some things are realistic, some are a pipe dream 😊] : http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
For this painting I used :
Liquitex Acrylic Ink - Cerulean Blue
Artist’s Loft paints:
- Flow Acrylic White for the negative space and in the dirty pour
- Flow Acrylic Neon Green
- Brilliant Blue
- Cerulean Blue
- Aqua Green
This is my formula for all the paint:
1 part paint to 5 parts Floetrol (but 2 parts paint to 5 parts Floetrol works well too)
I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. I always try to limit the amount of water that I use ... too much will break down the binding properties of the acrylic paint. How much is too much? I try to keep the amount of water under 50% of the amount of paint.
There was silicone in the four colors but not in the white. My favorite silicone is 3 in1 All Temp Silicone, available at most hardware stores.
This was done on a small canvas panel (5x7) and the pour was under an ounce of paint (roughly 20 ml).
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 20] SAVE paint & IMPROVE your DIRTY POUR fluid acrylic painting! Acrylic Pouring Tutorial](https://i.ytimg.com/vi/RaGwW15sl3A/mqdefault.jpg)
![[3] Fluid painting: Resin pour using Pebeo paints, mica, and acrylic paint
A fluid resin painting experiment using Pebeo Fantasy Prisme and Moon paints, Pebeo Vitrail paint, Perfect Pearls mica, and Decoart acrylic paint as the coloring agents for the resin. I show you step-by-step what I did to pour the resin. [3] Fluid painting: Resin pour using Pebeo paints, mica, and acrylic paint](https://i.ytimg.com/vi/Ry5j6dielRs/mqdefault.jpg)
![111] Acrylic Pouring : 2 Soft and Light Tone Ring Pours WITHOUT Using Light Colored Paint.
In this video I show a couple of ways I made ring pours in softer, muted colors... because sometimes, bright, dark, or loud colors won’t do, and you want lighter colors. 😊
Join my FACEBOOK GROUP: https://www.facebook.com/groups/Myriams.Fluid.Art.Tribe See you there! ✨
https://facebook.com/MyriamsNature http://instagram.com/Myriams_Nature
SOME EASY WAYS TO HELP KEEP VIDEOS COMING :
🔹 Contributing for supplies: https://www.PayPal.me/MyriamsNature
🔸🔸Being a monthly patron (this includes rewards like EXCLUSIVE videos!😄🎉) :
https://www.patreon.com/myriamsnature
🔹 Amazon wishlist (some things are realistic, some are a dream 😄): http://www.amazon.com/registry/wishlist/18P8J68XW9RJA
❇️ Convenient Shopping for Acrylic, Resin & Alcohol Ink Art:
https://www.amazon.com/shop/MyriamsNature
Categorized PICTURED LINKS to hundreds of fluid art products! 😊
FOR THESE PIECES I USED :
▪️ All DecoArt Paints :
1st painting...
— Americana Titanium White , Sour Apple, True Ochre, Royal Fuchsia, Ultra Blue Deep
2nd painting...
— Americana Titanium White, Sour Apple, Coral, Purple Pizzazz
— Dazzling Metallics Festive Red
— Extreme Sheen 24k Gold and Aquamarine
A set of 18 Dazzling Metallic colors: https://amzn.to/2TEuEP8
For regular colors, I recommend DecoArt Americana paints because they are nicely pigmented, perform beautifully, are readily available and well priced.
A sampler pack of 18 popular colors: https://amzn.to/2UWSQxp
A Premium version of this paint comes in 2.5 oz tubes... here is the Titanium White (as an example): https://amzn.to/2UV3CEk
▪️DecoArt Pouring Medium ...
16 oz: https://amzn.to/2F5jsDV
64 oz: https://amzn.to/2E9X7I9
This is my pouring medium of choice because it mixes very easily into paint, prevents cracking and crazing, and it promotes cells.
(See mixing formula below)
▪️Floetrol (alternative “medium” for cost savings): https://amzn.to/2H96pWP
▪️Small, one ounce squeeze bottles
— for a pack of 6: https://amzn.to/2qNs517
— for a pack of 12: https://amzn.to/2qLBrKs
▪️Blue-tipped squeeze bottles I get from eBay ... they take about 3 weeks to arrive : goo.gl/LMC6Uf
————————————————
PAINT MIXING (for ALL the paint, white included)
- I add roughly 1 part paint to 2 - 3 parts Pouring Medium
(This is my usual formula for thinning all the paint if using Floetrol as well.)
I eyeball amounts because having the same consistency/thickness for each of your mixed paints is more important than the ratios of medium to paint.
ALL of my paints (all the pouring colors as well as whatever negative space color I might use) are mixed to the same consistency using the formula above and adding tiny bits of water as, and IF, needed.
- When adding water, the goal is to get my paint to the consistency of warm honey. The amount of water will depend on the type of acrylic paint ... Flow acrylic (runny like syrup) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more. Try to limit the amount of water that you use to under 25% of the amount of paint ... too much water will break down the binding properties of the acrylic paint. Ideally NO water is preferable but adding a little will be ok.
SEALING / VARNISHING
Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors.
It gives a glossy finish: http://amzn.to/2jGh3KO
For a matte/satin finish instead, I use this: http://amzn.to/2fvgYF0
If you prefer to brush on your varnish, I highly recommend Miniwax Polycrylic for its ease of use, high shine and lack of brush marks: https://amzn.to/2Gr3PMp
This was done on three 5x7 inch canvas panels.
Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕 111] Acrylic Pouring : 2 Soft and Light Tone Ring Pours WITHOUT Using Light Colored Paint.](https://i.ytimg.com/vi/S5-IZXXq9Xo/mqdefault.jpg)