#284: Basics of RF Bias Tees including applications and examples @w2aew

w2aew | #284: Basics of RF Bias Tees including applications and examples @w2aew | Uploaded June 2018 | Updated October 2024, 11 hours ago.
Bias Tees are RF components that are used whenever you need to couple a DC, power or low-speed control signal onto an RF signal path. This video discusses the basics of Bias Tees, how they work, examples of practical construction and a few lab application examples showing them "in action". Links for the Bias Tees used in this video, as well as a copy of the video notes are here:
minicircuits.com/pdfs/ZFBT-4R2GW+.pdf
minicircuits.com/pdfs/ZX85-12G+.pdf
dorkage.com/youtube/Basics_of_Bias_Tees.pdf

#233: Back to Basics: How to use the 3 terminals of a lab power supply | split supply

#263: Using a VNA to sweep an RF Dummy Load | Tektronix TTR506A Vector Network Analyzer

#311: Why are my oscilloscope voltage readings wrong? Top 5 reasons...

#242: How to use an oscilloscope. Plus, seeing signals in antique radios | NJARC

#333: Installation and test of Narrow CW filter in Icom IC-703 - Filter: Inrad #116

#329: Presentation recording: Intro to the VNA and NanoVNA for BayCon 2021

#226: Project Diana 70th Anniversary Special Event | Moonbounce | EME

#219: Back to Basics: Introduction to Field Effect Transistors JFET MOSFET

#206: Importance of 10X Probe Compensation with your Oscilloscope

#348: Quick Tip: What is a connector saver?

#388: Build, tune and test a trapped 20/30/40m End Fed Half Wave antenna