Uploaded August 2021 | Updated November 2026, 3 hours ago
If you need to capture 240p video from a vintage video game console or home computer, you should use OBS. 240p is the de-facto progressive video mode used by most home computers until VGA became standard and almost exclusively by all consoles until the Sega Dreamcast. With the right settings, you can capture properly deinterlaced video from composite or s-video sources. Almost all Composite and S-Video capture devices treat all input video as interlaced video, but it was not intended to be displayed in that manner.
The correct settings require selecting the retro deinterlacing option, which can easily be brought up by right clicking on the capture window. Next, click on your Video Capture Device in your Sources and set the FPS to 30 or 29.97, Finally, go into the Settings button, Click on Video and select either 60 or 59.94 in the Common FPS Values drop down menu item.
Mega Man 2 NES is an excellent check for proper deinterlacing and what I have used in this video. You start the game, select Metal Man's stage and walk a little ways until you are between the first two spiked crushers without having to fight the ground moving you in one direction or another. Mega Man and his energy bar will constantly flicker bur will not turn invisible at this point. The game draws these objects at 30Hz at this point, or every other frame. If the energy bar or Mega Man or the crushers disappear for any length of time (a few frames) then you are not deinterlacing properly.
Here are some samples of some interlacing settings :
0:00 - No deinterlacing is performed, which is the OBS default setting. This is improper.
0:11 - Retro deinterlacing is set, but the Video Capture Device has 59.94 NTSC, Highest FPS or Match Output FPS. Improper.
0:22 - Retro deinterlacing is set, but the Video Settings is set to 30fps or 29.94fps. Improper.
0:32 - Retro deinterlacing is set, Video Capture Device is set to 30 FPS and Video Settings is set to 60 FPS. This is what it should look like (absent frame skipping due to the NES outputting 60.0988fps)
If you have a device which can capture 240p RGB or Component Video, it may also treat these signals as interlaced. In this case the same instructions apply to those captures. Other devices like a Datapath card are smarter and treat these signals as progressive and the Retro deinterlace option should not be used for a Datapath, you will negatively impact your video if you do.
If you need to capture 240p video from a vintage video game console or home computer, you should use OBS. 240p is the de-facto progressive video mode used by most home computers until VGA became standard and almost exclusively by all consoles until the Sega Dreamcast. With the right settings, you can capture properly deinterlaced video from composite or s-video sources. Almost all Composite and S-Video capture devices treat all input video as interlaced video, but it was not intended to be displayed in that manner.
The correct settings require selecting the retro deinterlacing option, which can easily be brought up by right clicking on the capture window. Next, click on your Video Capture Device in your Sources and set the FPS to 30 or 29.97, Finally, go into the Settings button, Click on Video and select either 60 or 59.94 in the Common FPS Values drop down menu item.
Mega Man 2 NES is an excellent check for proper deinterlacing and what I have used in this video. You start the game, select Metal Man's stage and walk a little ways until you are between the first two spiked crushers without having to fight the ground moving you in one direction or another. Mega Man and his energy bar will constantly flicker bur will not turn invisible at this point. The game draws these objects at 30Hz at this point, or every other frame. If the energy bar or Mega Man or the crushers disappear for any length of time (a few frames) then you are not deinterlacing properly.
Here are some samples of some interlacing settings :
0:00 - No deinterlacing is performed, which is the OBS default setting. This is improper.
0:11 - Retro deinterlacing is set, but the Video Capture Device has 59.94 NTSC, Highest FPS or Match Output FPS. Improper.
0:22 - Retro deinterlacing is set, but the Video Settings is set to 30fps or 29.94fps. Improper.
0:32 - Retro deinterlacing is set, Video Capture Device is set to 30 FPS and Video Settings is set to 60 FPS. This is what it should look like (absent frame skipping due to the NES outputting 60.0988fps)
If you have a device which can capture 240p RGB or Component Video, it may also treat these signals as interlaced. In this case the same instructions apply to those captures. Other devices like a Datapath card are smarter and treat these signals as progressive and the Retro deinterlace option should not be used for a Datapath, you will negatively impact your video if you do.










