#229 Flare Fender Installation - Can-Am Defender @FromSteelToWood
#229 Flare Fender Installation - Can-Am Defender  @FromSteelToWood
Uploaded March 2021 | Updated November 2026, 3 hours ago
I install flare fender on our Can-Am Defender. Without it, the mud gets inside and that is not convenient at all! Especially on my coffee mug!

Need the template and instruction?
instructions.brp.com
Then search part #715006001
The template:
brp.secure.force.com/consumer/servlet/fileField?entityId=ka03x000000PqB9AAK&field=Attachment__Body__s

0:00 Introduction
0:43 Why Fenders
1:18 The front wheels stick out from the wheel wells
2:50 Dimple location for screws
3:43 Unboxing the parts
4:56 The aluminum lateral protection issue
7:05 Where to cut → the template
8:55 Tracing the cut
10:22 Cutting the rear flare
11:43 Dimple does not match... What to do?
13:30 Using the screw will be painful: using bolts instead
14:38 Unlatch the gas cylinder for better access
15:12 The front fender: missing one dimple?
16:27 Screwing the front flare
17:55 Quick view of the whole process
18:50 End result

This HD10 Mossy-Oak Edition is equipped with lateral aluminum protection, so part of the fenders need to be cut to a specific pattern

Instructions are available online for that installation, so are the templates for it.

Nothing like seeing it in real situation, as opposed to instructions on paper.
#229 Flare Fender Installation - Can-Am Defender#214 Updates from the Homestead#156 Its Not Over Yet!#176 SSQA Snowplow - Part 1#191 The Bolens, The Little Tractor That Could#300 Winter Logging With a 2WD Tractor#175 Raised Garden Beds - Part 2#125 Review of 2018#131 Skid Steer Quick Attach - Part 3#148 The Hidden Face of Mt. Lesage#132 Skid Steer Quick Attach - Trial!#274 Wood Shed Completion & Boiler Startup
From Steel To Wood |

#229 Flare Fender Installation - Can-Am Defender

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER