2018 Suntrip Solar Trike Build. Video #2, Hub Axle Customizations @GrinTechnologies
2018 Suntrip Solar Trike Build. Video #2, Hub Axle Customizations  @GrinTechnologies
Uploaded May 2018 | Updated November 2026, 4 days ago
With just 5 weeks before flying to France, there's still a lot left to do getting the trike built! Here we are looking at what needs to be done for fitting two All Axle hub motors to drive the front wheels of the tandem trike.

There isn't much of a standard for single side wheel mounts on tricycles, but this Terratrike uses a 20mm hollow spindle which is about as ideal as we could hope for. With a few custom machining operations on the axle we should be able to fabricate some custom hubs that will slide right on with the electrical cable passing through the hollow axle.

Both the modified axle and the anti-rotation tube are currently out for anodizing and should be at Grin next week to complete the motor builds.
2018 Suntrip Solar Trike Build. Video #2, Hub Axle Customizations65 Days on the Road in a 3 Minute Recap!3 Wheels Under the Sun -  Justin and Anne-Sophies 2018 Solar Ebike Suntrip Ride from France to IranSuntrip Solar Trike Build. Video #4, Rectangular Tube BendingHow to Setup a Basic PAS Sensor with a V3.1 Cycle AnalystConvertirte una bicicleta con motor de rueda BafangDisassembly Guide for Grins All-Axle Ebike Hub MotorGrin gear in Europe? Check out the new headquarters of Grintech.euWest Coast Tour Visit,  Bike Swift in SeattlePhaserunner Software V1.4, Loading Default Parameters and Basic OverviewShamrock Electric Sailboat Conversion Part 5 - Maiden Trip under Solar,  Across the Georgia StraightSuntrip Solar Trike Build. Video #7, All Together for Ferry Rush
Grin Technologies |

2018 Suntrip Solar Trike Build. Video #2, Hub Axle Customizations

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER