Uploaded April 2026 | Updated September 2026, 2 weeks ago
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2017 Ford F150 Raptor Trim Truck will have a brand new JVC 10.1" floating screen double din radio installed. We will be removing the factory 8" radio and installing the KW-Z800AW Direct Replacement Receiver which adds wireless Apple Carplay, Android Auto, HDMI, Bluetooth functionality, and enhanced power output for better sound quality. This is an OEM look radio with the performance of an aftermarket receiver.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This kit also works for F-250, F-350, F-450, and F-550 models with the similar dash design. This video also includes dash trim and stereo removal, radio wiring, and installation.
***NOTE: this install will apply to trucks only with the 8.4" Factory Screen. Using this kit, you also MUST use an iDatalink Maestro ADX S8-FO1 Installation kit.
***NOTE: You CANNOT replace the 8.4" OEM radio IF your truck was equipped with the B&O audio system UNLESS you bypass the factory amplifier (which is what we did in a separate video). IF you have the SONY audio system, the parts used in this video kit works just fine with that factory amp and is compatible.
If you have the 4.3" OEM Radio, you will need this video instead, and wanting to retain your factory dash bezel plastics, knobs, and buttons, you'll be required to install the JVC KW-Z1000AW 10.1" Radio.
To see the JVC KW-Z800AW unboxing and demo, click here:
youtu.be/PQZZ8A6kYxs
To see a regular 7" double din radio install, click here:
For just a mono amp and sub install, click here:
youtu.be/r5PGj7wLHDI
To see the B&O amplifier Bypass and new amps install, click here:
youtu.be/B3jDTUhNvyI
For a different sub and 5 channel amp Install video on a non-B&O F150, click here: youtu.be/TOBhsMJrSJ0
For the front speaker install video on this F150, click here:
youtu.be/TKrt-h21q6A
Click here to see the rear speaker install on this F150:
youtu.be/IjmETGaEpjs
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this Video (Amazon Associate Paid Links)
**FOR OEM 8" FACTORY DASH BEZELS**
*JVC 8" KW-Z800AW Radio (non-paid): tinyurl.com/44m2eypb
*iDatalink Maestro APX S8-FO1 Install Kit (non-paid): tinyurl.com/fhyh7c3j
*iDatalink Maestro ADS-MRR Module: amzn.to/43b5MFJ
---OR the ADS-MRR2 also works: amzn.to/4iNyrp8
*iDatalink Maestro Ken1 Radio Dongle: amzn.to/3ERQwEt
*(OPTIONAL) iDatalink Maestro ACC-VID1 Camera Filter: amzn.to/4td1zM6
*(OPTIONAL) iDatalink Maestro ADS-MIC1 OEM Mic Adapter: amzn.to/4s2ZGAr
*(OPTIONAL) iDatalink Maestro ACC-NAV1 GPS Antenna Adapter: amzn.to/4jRXtEg
*(OPTIONAL) iDatalink Maestro HRN-ANT-SAT1 Satalite Radio Adapter: amzn.to/4tmPzaV
*(FOR SONY Trim Trucks) iDatalink Maestro ACC-PAD1 Factory amp retention: amzn.to/41qKnHf
**FOR OEM 4.3" FACTORY DASH BEZELS**
*JVC 10.1" KW-Z1000AW Radio (non-paid): tinyurl.com/bde5ez48
*iDatalink Maestro APX S8-FO1 Install Kit (non-paid): tinyurl.com/fhyh7c3j
*iDatalink Maestro ADS-MRR Module: amzn.to/43b5MFJ
---OR the ADS-MRR2 also works: amzn.to/4iNyrp8
*iDatalink Maestro Ken1 Radio Dongle: amzn.to/3ERQwEt
*(OPTIONAL) iDatalink Maestro ACC-VID1 Camera Filter: amzn.to/4td1zM6
*(OPTIONAL) iDatalink Maestro ADS-MIC1 OEM Mic Adapter: amzn.to/4s2ZGAr
*(OPTIONAL) iDatalink Maestro ACC-NAV1 GPS Antenna Adapter: amzn.to/4jRXtEg
*(OPTIONAL) iDatalink Maestro HRN-ANT-SAT1 Satalite Radio Adapter: amzn.to/4tmPzaV
*(FOR SONY Trim Trucks) iDatalink Maestro ACC-PAD1 Factory amp retention: amzn.to/41qKnHf
If you want a fully assembled amp rack shipped to you, order here:
*(TRUCKS w/ NON-B&O / NON-SONY TO OEM RADIO): provobeast.com/product-page/2015-ford-f-series-truck-complete-amp-rack-audio-system-non-sony-non-b-o
*(TRUCKS w/ B&O BYPASS TO OEM RADIO) provobeast.com/product-page/2018-ford-f-series-truck-complete-amp-rack-audio-system-w-b-o
*(TRUCKS w/ SONY BYPASS TO OEM RADIO): provobeast.com/product-page/2015-2019-ford-f-series-truck-complete-amp-rack-audio-system-w-sony
*(TRUCKS w/ AFTERMARKET RADIO): provobeast.com/product-page/2015-2022-ford-f-series-truck-complete-amp-rack-to-aftermarket-radio
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2017 Ford F150 Raptor Trim Truck will have a brand new JVC 10.1" floating screen double din radio installed. We will be removing the factory 8" radio and installing the KW-Z800AW Direct Replacement Receiver which adds wireless Apple Carplay, Android Auto, HDMI, Bluetooth functionality, and enhanced power output for better sound quality. This is an OEM look radio with the performance of an aftermarket receiver.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This kit also works for F-250, F-350, F-450, and F-550 models with the similar dash design. This video also includes dash trim and stereo removal, radio wiring, and installation.
***NOTE: this install will apply to trucks only with the 8.4" Factory Screen. Using this kit, you also MUST use an iDatalink Maestro ADX S8-FO1 Installation kit.
***NOTE: You CANNOT replace the 8.4" OEM radio IF your truck was equipped with the B&O audio system UNLESS you bypass the factory amplifier (which is what we did in a separate video). IF you have the SONY audio system, the parts used in this video kit works just fine with that factory amp and is compatible.
If you have the 4.3" OEM Radio, you will need this video instead, and wanting to retain your factory dash bezel plastics, knobs, and buttons, you'll be required to install the JVC KW-Z1000AW 10.1" Radio.
To see the JVC KW-Z800AW unboxing and demo, click here:
youtu.be/PQZZ8A6kYxs
To see a regular 7" double din radio install, click here:
For just a mono amp and sub install, click here:
youtu.be/r5PGj7wLHDI
To see the B&O amplifier Bypass and new amps install, click here:
youtu.be/B3jDTUhNvyI
For a different sub and 5 channel amp Install video on a non-B&O F150, click here: youtu.be/TOBhsMJrSJ0
For the front speaker install video on this F150, click here:
youtu.be/TKrt-h21q6A
Click here to see the rear speaker install on this F150:
youtu.be/IjmETGaEpjs
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used in this Video (Amazon Associate Paid Links)
**FOR OEM 8" FACTORY DASH BEZELS**
*JVC 8" KW-Z800AW Radio (non-paid): tinyurl.com/44m2eypb
*iDatalink Maestro APX S8-FO1 Install Kit (non-paid): tinyurl.com/fhyh7c3j
*iDatalink Maestro ADS-MRR Module: amzn.to/43b5MFJ
---OR the ADS-MRR2 also works: amzn.to/4iNyrp8
*iDatalink Maestro Ken1 Radio Dongle: amzn.to/3ERQwEt
*(OPTIONAL) iDatalink Maestro ACC-VID1 Camera Filter: amzn.to/4td1zM6
*(OPTIONAL) iDatalink Maestro ADS-MIC1 OEM Mic Adapter: amzn.to/4s2ZGAr
*(OPTIONAL) iDatalink Maestro ACC-NAV1 GPS Antenna Adapter: amzn.to/4jRXtEg
*(OPTIONAL) iDatalink Maestro HRN-ANT-SAT1 Satalite Radio Adapter: amzn.to/4tmPzaV
*(FOR SONY Trim Trucks) iDatalink Maestro ACC-PAD1 Factory amp retention: amzn.to/41qKnHf
**FOR OEM 4.3" FACTORY DASH BEZELS**
*JVC 10.1" KW-Z1000AW Radio (non-paid): tinyurl.com/bde5ez48
*iDatalink Maestro APX S8-FO1 Install Kit (non-paid): tinyurl.com/fhyh7c3j
*iDatalink Maestro ADS-MRR Module: amzn.to/43b5MFJ
---OR the ADS-MRR2 also works: amzn.to/4iNyrp8
*iDatalink Maestro Ken1 Radio Dongle: amzn.to/3ERQwEt
*(OPTIONAL) iDatalink Maestro ACC-VID1 Camera Filter: amzn.to/4td1zM6
*(OPTIONAL) iDatalink Maestro ADS-MIC1 OEM Mic Adapter: amzn.to/4s2ZGAr
*(OPTIONAL) iDatalink Maestro ACC-NAV1 GPS Antenna Adapter: amzn.to/4jRXtEg
*(OPTIONAL) iDatalink Maestro HRN-ANT-SAT1 Satalite Radio Adapter: amzn.to/4tmPzaV
*(FOR SONY Trim Trucks) iDatalink Maestro ACC-PAD1 Factory amp retention: amzn.to/41qKnHf
If you want a fully assembled amp rack shipped to you, order here:
*(TRUCKS w/ NON-B&O / NON-SONY TO OEM RADIO): provobeast.com/product-page/2015-ford-f-series-truck-complete-amp-rack-audio-system-non-sony-non-b-o
*(TRUCKS w/ B&O BYPASS TO OEM RADIO) provobeast.com/product-page/2018-ford-f-series-truck-complete-amp-rack-audio-system-w-b-o
*(TRUCKS w/ SONY BYPASS TO OEM RADIO): provobeast.com/product-page/2015-2019-ford-f-series-truck-complete-amp-rack-audio-system-w-sony
*(TRUCKS w/ AFTERMARKET RADIO): provobeast.com/product-page/2015-2022-ford-f-series-truck-complete-amp-rack-to-aftermarket-radio
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
