Uploaded November 2025 | Updated September 2026, 2 weeks ago
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2007 Toyota Avalon (with JBL) will have a brand new 4 or 5 channel amplifier installed. We will demonstrate how to also bypass the factory JBL amplifier and integrate this amplifier to an aftermarket radio installed previously.
NOTE for different TRIMS Avalon:
1. If you DON'T have JBL and are KEEPING the OEM radio, we offer a T-harness linked below for your amplifier integration needs.
2. If you DO have JBL and are KEEPING the OEM radio, you'll need a Pac Amp Pro LOC kit which we can link below.
3. If you DON'T have JBL and have an AFTERMARKET radio, you'll use 9 conductor speaker wire and tie your amp speaker outputs to the radio's harness adapter, capping off the radio speaker outputs.
4. if you DO have JBL and have an AFTERMARKET radio, this is the video that walks you through the process.
This video applies to Toyota Avalon models for years 2005, 2006, 2005, 2008, 2009 and 2010. This video also includes JBL amplifier removal, bypass, amplifier wiring, and installation.
Click here to see how we installed the aftermarket radio:
youtu.be/wlXSgcSo9tI
Click here to see the reverse camera install video:
youtu.be/EzWUQXIGXrk
Click here to see the older version of this install:
youtu.be/ZFqVdsMNDZ4
Click here to see the factory subwoofer replacement video:
Click here to see the front door speaker install video:
youtu.be/nyMqFh8uhXE
Click here to see the rear door speaker install video:
youtu.be/DexpeecbhxM
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*12v clean wiring ruler: provobeast.com/product-page/clean-wiring-installer-ruler
*NVX NDA6004 4 Channel (unavailable)
--Recommended Stinger 4 channel: amzn.to/4kw4v28
--Recommended Kenwood 4 channel: amzn.to/47RXQKF
--Recommended AudioControl 4 channel: amzn.to/4hXt5Zp
*If running also a subwoofer, here are recommended 5 channel amps:
--Recommended Stinger 5 channel: amzn.to/4k7BlGL
--Recommended Kenwood 5 channel: amzn.to/3tjoj3a
--Recommended AudioControl 5 channel: amzn.to/47VzZKi
*Skar Audio 4 Gauge OFC wiring kit: amzn.to/31f0r2U
*Pac APH-TY01 JBL Amplifier Bypass Harness: amzn.to/4qS7Ooh
--If you do NOT have JBL, and are keeping the OEM radio, here is a T-harness: provobeast.com/product-page/toyota-amplifier-t-harness-wire-kit-for-factory-oem-head-unit
--If you are keeping the OEM radio AND have JBL, you'll need the Pac AP4-TY11 (in addition to the APH-TY01) for signal output: amzn.to/3JZf7d2
*4 Channel RCA cables 17': amzn.to/47VcMIf
**If you don't have JBL, and want to build your own T-harness, here are the parts if keeping the OEM radio:
*Pac LPH-TY01 T-harness: amzn.to/4f8w5QA
*Metra 9 Conductor Cable Speaker Wire: amzn.to/3xK4PSk
*Pac LP3-4 Line Out Converter: amzn.to/3PWSje1
**If you want to also install a subwoofer if going with a 5 channel option, here are great subwoofer & Box options:
*Skar Audio 12" sub (600w RMS 1 ohm): amzn.to/48hf191
*Skar Audio 10" sub (600w RMS 1 ohm): amzn.to/49cGN8A
*Stinger Audio 10" sub (700w RMS 1 ohm): amzn.to/49i5lgq
*Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases*
Parts linked in the description below!
If this video was helpful, consider chipping in a few bucks to support the channel: provobeast.com/donate
Help support the channel by picking up a T-shirt! provobeast.com/product-page/provo-beast-unisex-t-shirts
Watch a full tutorial as a 2007 Toyota Avalon (with JBL) will have a brand new 4 or 5 channel amplifier installed. We will demonstrate how to also bypass the factory JBL amplifier and integrate this amplifier to an aftermarket radio installed previously.
NOTE for different TRIMS Avalon:
1. If you DON'T have JBL and are KEEPING the OEM radio, we offer a T-harness linked below for your amplifier integration needs.
2. If you DO have JBL and are KEEPING the OEM radio, you'll need a Pac Amp Pro LOC kit which we can link below.
3. If you DON'T have JBL and have an AFTERMARKET radio, you'll use 9 conductor speaker wire and tie your amp speaker outputs to the radio's harness adapter, capping off the radio speaker outputs.
4. if you DO have JBL and have an AFTERMARKET radio, this is the video that walks you through the process.
This video applies to Toyota Avalon models for years 2005, 2006, 2005, 2008, 2009 and 2010. This video also includes JBL amplifier removal, bypass, amplifier wiring, and installation.
Click here to see how we installed the aftermarket radio:
youtu.be/wlXSgcSo9tI
Click here to see the reverse camera install video:
youtu.be/EzWUQXIGXrk
Click here to see the older version of this install:
youtu.be/ZFqVdsMNDZ4
Click here to see the factory subwoofer replacement video:
Click here to see the front door speaker install video:
youtu.be/nyMqFh8uhXE
Click here to see the rear door speaker install video:
youtu.be/DexpeecbhxM
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*12v clean wiring ruler: provobeast.com/product-page/clean-wiring-installer-ruler
*NVX NDA6004 4 Channel (unavailable)
--Recommended Stinger 4 channel: amzn.to/4kw4v28
--Recommended Kenwood 4 channel: amzn.to/47RXQKF
--Recommended AudioControl 4 channel: amzn.to/4hXt5Zp
*If running also a subwoofer, here are recommended 5 channel amps:
--Recommended Stinger 5 channel: amzn.to/4k7BlGL
--Recommended Kenwood 5 channel: amzn.to/3tjoj3a
--Recommended AudioControl 5 channel: amzn.to/47VzZKi
*Skar Audio 4 Gauge OFC wiring kit: amzn.to/31f0r2U
*Pac APH-TY01 JBL Amplifier Bypass Harness: amzn.to/4qS7Ooh
--If you do NOT have JBL, and are keeping the OEM radio, here is a T-harness: provobeast.com/product-page/toyota-amplifier-t-harness-wire-kit-for-factory-oem-head-unit
--If you are keeping the OEM radio AND have JBL, you'll need the Pac AP4-TY11 (in addition to the APH-TY01) for signal output: amzn.to/3JZf7d2
*4 Channel RCA cables 17': amzn.to/47VcMIf
**If you don't have JBL, and want to build your own T-harness, here are the parts if keeping the OEM radio:
*Pac LPH-TY01 T-harness: amzn.to/4f8w5QA
*Metra 9 Conductor Cable Speaker Wire: amzn.to/3xK4PSk
*Pac LP3-4 Line Out Converter: amzn.to/3PWSje1
**If you want to also install a subwoofer if going with a 5 channel option, here are great subwoofer & Box options:
*Skar Audio 12" sub (600w RMS 1 ohm): amzn.to/48hf191
*Skar Audio 10" sub (600w RMS 1 ohm): amzn.to/49cGN8A
*Stinger Audio 10" sub (700w RMS 1 ohm): amzn.to/49i5lgq
*Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases*
