Uploaded August 2014 | Updated November 2026, 2 days ago
The firmware update for the Blade 200 QX unlocks three additional flight modes so you can experience the aerobatic potential of the 200 QX. While the updated firmware software is free, the Blade 200 QX update cable (BLH7840) is required to install the software to a 200 QX. Additionally, pilots must install the appropriate propellers prior to flight in order to experience each flight mode to its full extent.
See more details on BladeHelis.com: bladehelis.com/200QX
The firmware update for the Blade 200 QX unlocks three additional flight modes so you can experience the aerobatic potential of the 200 QX. While the updated firmware software is free, the Blade 200 QX update cable (BLH7840) is required to install the software to a 200 QX. Additionally, pilots must install the appropriate propellers prior to flight in order to experience each flight mode to its full extent.
See more details on BladeHelis.com: bladehelis.com/200QX







![Blade Fusion 180 | Tailboom / Tail Control Rod Replacement
In this Fusion 180 / Fusion 180 Smart repair tutorial, Ethan Ater will be showing the correct procedure in replacing the tail boom [BLH5812] and tail control rod guide [BLH5811]. One thing to keep in mind when working with small helicopters is that the screws do not require as much torque as those on bigger helicopters. Install with a small amount of torque after the screw starts to feel tight.
Please visit https://www.bladehelis.com/product/fusion-180-smart-bnf-basic/BLH05850.html for more information on the Fusion 180 Smart.
Follow Blade RC on Facebook and Instagram!
https://www.facebook.com/BladeRC1/
https://www.instagram.com/bladehelis/ Blade Fusion 180 | Tailboom / Tail Control Rod Replacement](https://i.ytimg.com/vi/YXABYeMOkFs/mqdefault.jpg)


