Uploaded August 2022 | Updated September 2026, 2 weeks ago
Wow, so where to start!?!?
I know, Thank you All for the 200 plus Subs!!!!
This is a car some of you know I have & wanted to see it run, I bought it (The chassis) about 3 years ago from Taiwan or Malaysia (I can't remember) it is how I bought it other than the motor heat sink fins, wheels & tires and the body.
A right side drive cockpit would look really nice in this body..
I have done nothing to it other than what I'm typing here & said in the video. I did have to put all the electrics in it, those are....
A very old 540 silver can motor with the steel end bell
A very old Acoms AS-12 analog servo
A 22 tooth pinion
A dated Dynamite Power Pulse ESC (can run motors down to 13 turns) and it's period correct for the chassis as this kit did not come with a MSC.
Tamiya semi-slick tire's & kit correct wheels.
However, I was using a Gartpot 4000mah 50C 7.4v lipo pack.
Another Special Thanks to the following People
Mark of Mark Bryan RC
Rob of Rob Brennan RC
Carmine of Carmine's RC Tips & Tricks
Addam of Addams Playground
Kevin of Madmustang RC
REX's RC
TRUEMAXX
Please go look at their channels and give them a sub & likes (do comment as well).
A Very Special Thank You To The RC ELF, You Know Why!!!!
Thank You to my wife Jennifer, for putting up with all my BS!!!
These people went out of their way to help a complete stranger, to help my channel grow, for that, I say Semper Fidelis!!!!! (however, I have known Kevin for the better part of 20 years).
And REX, I can't forget you man, I know you have been waiting to see this, it did not go as I wanted but you can see it run now!!!!
Again, THANK YOU ALL SO MUCH!!!!!!!!!
Wow, so where to start!?!?
I know, Thank you All for the 200 plus Subs!!!!
This is a car some of you know I have & wanted to see it run, I bought it (The chassis) about 3 years ago from Taiwan or Malaysia (I can't remember) it is how I bought it other than the motor heat sink fins, wheels & tires and the body.
A right side drive cockpit would look really nice in this body..
I have done nothing to it other than what I'm typing here & said in the video. I did have to put all the electrics in it, those are....
A very old 540 silver can motor with the steel end bell
A very old Acoms AS-12 analog servo
A 22 tooth pinion
A dated Dynamite Power Pulse ESC (can run motors down to 13 turns) and it's period correct for the chassis as this kit did not come with a MSC.
Tamiya semi-slick tire's & kit correct wheels.
However, I was using a Gartpot 4000mah 50C 7.4v lipo pack.
Another Special Thanks to the following People
Mark of Mark Bryan RC
Rob of Rob Brennan RC
Carmine of Carmine's RC Tips & Tricks
Addam of Addams Playground
Kevin of Madmustang RC
REX's RC
TRUEMAXX
Please go look at their channels and give them a sub & likes (do comment as well).
A Very Special Thank You To The RC ELF, You Know Why!!!!
Thank You to my wife Jennifer, for putting up with all my BS!!!
These people went out of their way to help a complete stranger, to help my channel grow, for that, I say Semper Fidelis!!!!! (however, I have known Kevin for the better part of 20 years).
And REX, I can't forget you man, I know you have been waiting to see this, it did not go as I wanted but you can see it run now!!!!
Again, THANK YOU ALL SO MUCH!!!!!!!!!
