Uploaded November 2016 | Updated September 2026, 3 weeks ago
Description: NO RADIATOR REMOVAL this method. This is a video on how I changed my Starter on my 3.3L V6 2002 Grand Caravan. This is for entertainment purposes. Should you use this video to change your starter it is at your own risk, and I am not responsible for any problems that arise using this video as a reference. Just a hint from a viewer, M&J Resare, put the bolts in and hang the dust plate from bolts then install it. Thanks M&J.
Part 1 is here: youtu.be/n9gH_ZpAP6Q
Procedure Applies to the following:
1999 to 2004 3.3 & 3.8L Equipped:
- Dodge Caravans and Grand Caravans.
- Chrysler Town & Country's.
- Plymouth Voyagers and Grand Voyagers.
Part I used: Starter eBay Nugen Motorparts Part No. 17784N
item no. 121469277064 $59.00 Free Shipping.
Tools I used:
- 3/8" Drive Ratchet.
- 3/8" Stuby Drive Ratchet.
- 3/8" to 1/2" Drive Adapter.
- 1/2" to 3/8" Drive Adapter.
the last two Adapters can be replaced by a 3/8" extension 1" long.
- 3/8" Drive 3" extension.
- 3/8" Drive 13mm Socket.
- 3/8" Drive 13mm Deep Socket.
- 13mm Combination Wrench.
- 15mm Combination Wrench.
- 3/8" Drive 15mm Socket.
- 3/8" Drive 15mm Deep Socket.
- 1/4" Blade Screw Driver.
- Small LED Hobby Light, or a drop light.
- Car Hydraulic Jack.
- Two Car Jack Stands.
- Wheel Chock or 4"X4"x12" Block of Wood.
- Small Carpet 6' by 4', helps on the back bones etc while lying on concrete.
Optional Tools used but not shown:
- 6" Needle Nose Pliers to pull plastic clip off Solenoid Wire.
- Step Stool to access engine bay while on Jack Stands.
- Small Wire Brush to clean Starter Cable Connections.
- Two Small Shop Rags.
Thanks for watching: I hope you enjoyed the video and it helped answer any questions you have on how a starter is changed on a 2002 Grand Caravan.
If you found the video useful please give me a thumbs up and please subscribe to help my channel.
Best Wishes n Blessings Keith
Description: NO RADIATOR REMOVAL this method. This is a video on how I changed my Starter on my 3.3L V6 2002 Grand Caravan. This is for entertainment purposes. Should you use this video to change your starter it is at your own risk, and I am not responsible for any problems that arise using this video as a reference. Just a hint from a viewer, M&J Resare, put the bolts in and hang the dust plate from bolts then install it. Thanks M&J.
Part 1 is here: youtu.be/n9gH_ZpAP6Q
Procedure Applies to the following:
1999 to 2004 3.3 & 3.8L Equipped:
- Dodge Caravans and Grand Caravans.
- Chrysler Town & Country's.
- Plymouth Voyagers and Grand Voyagers.
Part I used: Starter eBay Nugen Motorparts Part No. 17784N
item no. 121469277064 $59.00 Free Shipping.
Tools I used:
- 3/8" Drive Ratchet.
- 3/8" Stuby Drive Ratchet.
- 3/8" to 1/2" Drive Adapter.
- 1/2" to 3/8" Drive Adapter.
the last two Adapters can be replaced by a 3/8" extension 1" long.
- 3/8" Drive 3" extension.
- 3/8" Drive 13mm Socket.
- 3/8" Drive 13mm Deep Socket.
- 13mm Combination Wrench.
- 15mm Combination Wrench.
- 3/8" Drive 15mm Socket.
- 3/8" Drive 15mm Deep Socket.
- 1/4" Blade Screw Driver.
- Small LED Hobby Light, or a drop light.
- Car Hydraulic Jack.
- Two Car Jack Stands.
- Wheel Chock or 4"X4"x12" Block of Wood.
- Small Carpet 6' by 4', helps on the back bones etc while lying on concrete.
Optional Tools used but not shown:
- 6" Needle Nose Pliers to pull plastic clip off Solenoid Wire.
- Step Stool to access engine bay while on Jack Stands.
- Small Wire Brush to clean Starter Cable Connections.
- Two Small Shop Rags.
Thanks for watching: I hope you enjoyed the video and it helped answer any questions you have on how a starter is changed on a 2002 Grand Caravan.
If you found the video useful please give me a thumbs up and please subscribe to help my channel.
Best Wishes n Blessings Keith
