Uploaded January 2025 | Updated September 2026, 1 week ago
1/8.5 JetRuler/Banana Hobby F/A-18F Super Hornet UNBOXING
Overview
JetRuler is thrilled to introduce our latest creation, a scale model of one of aviation history's most legendary aircraft, the F/A-18F Super Hornet.
Our goal with this model was to exceed expectations, delivering a stunningly accurate replica that not only captures the beauty of the original but also offers unparalleled reliability and durability. Designed for regular use, this model is easy to transport and assemble, ensuring a seamless experience for enthusiasts.
Features
Full composite construction, offering both lightweight design and superior strength
Painted outside the mold for a seamless finish with no visible seam lines
True-to-scale, highly detailed simulated cockpit instruments and pilot figures
Intricately simulated aircraft panel lines and rivets for authentic realism
Ultra-bright, high-precision navigation lights and a multi-color tail flame afterburner lighting system create a scale-accurate appearance
Specifications
Wingspan1506mm (59.3 in)
Length2100mm (82.6 in)
Weight14.5kg (32 lb) RTF wo/ fuel
Included Hardware (ARF-PRO)
Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
JetRuler electric retracts and electric brakes specific for this model
Standard cockpit (pilot figures not included)
Servo extension leads
Fixed dual-wall Y-shaped exhaust thrust pipe (for 120-160N turbines)
2X 850ML fuel tanks
1X 2.15 liter main fuel tank
220ML UAT
Pre-prepared pushrods with ball links
Servo connector brackets
Pre-glued control horns
Required Hardware (ARF-PRO to RTF)
Engine: 120-160NServos: Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
Optional Hardware
Version 2 True-to-Scale, Highly Detailed Cockpit with 2X Pilot Figures
Navigation lights and multi-color tail flame afterburner lighting system
Build Info
Control ThrowsTravel each way
Aileron25mm up / 25mm down
Elevator20mm up / 20mm down
Rudder35mm left / 35mm right
Flap Take-Off15-20°
Flap Landing35-45°
Horizontal Tail Position69mm
Crow User SetupSet the ailerons on both sides to 5 degrees upward at maximum flap deployment
Center of Gravity125mm from the front leading edge on the root of the wing
PNP (Turbine Ready)
Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
JetRuler electric retracts and electric brakes specific for this model (pre-installed)
Navigation lights and multi-color tail flame afterburner lighting system (pre-installed)
Servo extension leads (pre-installed)
Fixed dual-wall Y-shaped exhaust thrust pipe (for 120-160N turbines)
2X 850ML fuel tanks (Free Upgrade to 850ML Kevlar Fuel Tanks)
1X 2.15 liter main fuel tank (Free Upgrade to 2.15 Liter Kevlar Fuel Tank)
220ML UAT
Pre-prepared pushrods with ball links
Servo connector brackets
Pre-glued control horns
JetRuler high torque servos and extension wires (all pre-installed)
Free Version 2 True-to-Scale, Highly Detailed Cockpit with 2X Pilot Figures
Free JetRuler Wooden Table-Top Maintenance Stand
Free Banana Hobby Heavy Duty Maintenance Stand
Free UPS Domestic Shipping (lower 48 states)
Required Engine: 120-160N
Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
📌 Pre-order now at Banana Hobby!
bananahobby.com/turbine-rc-jets-composite-f18.html
1/8.5 JetRuler/Banana Hobby F/A-18F Super Hornet UNBOXING
Overview
JetRuler is thrilled to introduce our latest creation, a scale model of one of aviation history's most legendary aircraft, the F/A-18F Super Hornet.
Our goal with this model was to exceed expectations, delivering a stunningly accurate replica that not only captures the beauty of the original but also offers unparalleled reliability and durability. Designed for regular use, this model is easy to transport and assemble, ensuring a seamless experience for enthusiasts.
Features
Full composite construction, offering both lightweight design and superior strength
Painted outside the mold for a seamless finish with no visible seam lines
True-to-scale, highly detailed simulated cockpit instruments and pilot figures
Intricately simulated aircraft panel lines and rivets for authentic realism
Ultra-bright, high-precision navigation lights and a multi-color tail flame afterburner lighting system create a scale-accurate appearance
Specifications
Wingspan1506mm (59.3 in)
Length2100mm (82.6 in)
Weight14.5kg (32 lb) RTF wo/ fuel
Included Hardware (ARF-PRO)
Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
JetRuler electric retracts and electric brakes specific for this model
Standard cockpit (pilot figures not included)
Servo extension leads
Fixed dual-wall Y-shaped exhaust thrust pipe (for 120-160N turbines)
2X 850ML fuel tanks
1X 2.15 liter main fuel tank
220ML UAT
Pre-prepared pushrods with ball links
Servo connector brackets
Pre-glued control horns
Required Hardware (ARF-PRO to RTF)
Engine: 120-160NServos: Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories
Optional Hardware
Version 2 True-to-Scale, Highly Detailed Cockpit with 2X Pilot Figures
Navigation lights and multi-color tail flame afterburner lighting system
Build Info
Control ThrowsTravel each way
Aileron25mm up / 25mm down
Elevator20mm up / 20mm down
Rudder35mm left / 35mm right
Flap Take-Off15-20°
Flap Landing35-45°
Horizontal Tail Position69mm
Crow User SetupSet the ailerons on both sides to 5 degrees upward at maximum flap deployment
Center of Gravity125mm from the front leading edge on the root of the wing
PNP (Turbine Ready)
Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
JetRuler electric retracts and electric brakes specific for this model (pre-installed)
Navigation lights and multi-color tail flame afterburner lighting system (pre-installed)
Servo extension leads (pre-installed)
Fixed dual-wall Y-shaped exhaust thrust pipe (for 120-160N turbines)
2X 850ML fuel tanks (Free Upgrade to 850ML Kevlar Fuel Tanks)
1X 2.15 liter main fuel tank (Free Upgrade to 2.15 Liter Kevlar Fuel Tank)
220ML UAT
Pre-prepared pushrods with ball links
Servo connector brackets
Pre-glued control horns
JetRuler high torque servos and extension wires (all pre-installed)
Free Version 2 True-to-Scale, Highly Detailed Cockpit with 2X Pilot Figures
Free JetRuler Wooden Table-Top Maintenance Stand
Free Banana Hobby Heavy Duty Maintenance Stand
Free UPS Domestic Shipping (lower 48 states)
Required Engine: 120-160N
Required all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
📌 Pre-order now at Banana Hobby!
bananahobby.com/turbine-rc-jets-composite-f18.html
