Uploaded May 2019 | Updated November 2026, 1 hour ago
This is time to give this homemade grapple a good trial. It is good to remind it's a Skid Steer Quick Attach system. Then I made a parallel hydraulic outlet to the curl cylinder and hook the grapple to it. This simple trick could be made with any tractor without 3rd funtion to operate a grapple.
The chain between the grapple and the loader arm limits the stroke of the grapple. So when the stroke is reached, oil has then no choice to flow toward the grapple's cylinder, consequently, opening it. Opposite occur when closing it, it's easier to close the grapple and when the log is pinched, then only the curl cylinder can move, so tilt back the grapple.
One good advantage of this design is the use of a single function doing all the work. Then the log is always maintain with dynamic pressure. If it ever move or settle in the grapple, it will close even tighter.
This is time to give this homemade grapple a good trial. It is good to remind it's a Skid Steer Quick Attach system. Then I made a parallel hydraulic outlet to the curl cylinder and hook the grapple to it. This simple trick could be made with any tractor without 3rd funtion to operate a grapple.
The chain between the grapple and the loader arm limits the stroke of the grapple. So when the stroke is reached, oil has then no choice to flow toward the grapple's cylinder, consequently, opening it. Opposite occur when closing it, it's easier to close the grapple and when the log is pinched, then only the curl cylinder can move, so tilt back the grapple.
One good advantage of this design is the use of a single function doing all the work. Then the log is always maintain with dynamic pressure. If it ever move or settle in the grapple, it will close even tighter.










