15. How to Interface an LCD to an ARM Microcontroller Part 2 @PatrickHoodDaniel
15. How to Interface an LCD to an ARM Microcontroller Part 2  @PatrickHoodDaniel
Uploaded December 2016 | Updated November 2026, 4 days ago
Purchase my new book: Arm Microcontroller Programming and Circuit Building Volume 1
amazon.com/dp-B09PHBT859/dp/B09PHBT859
I use the STM32CubeIDE in the book!
Get your STM32 kits at Newbiehack.com

I recommend using the STM32CubeIDE:
st.com/en/development-tools/stm32cubeide.html

You can still download the CoIDE here:
sourceforge.net/projects/coide

This is part 2 in a multi-part series on interfacing a 16x2 LCD to an ARM STM32F030 Microcontroller. In this video, I demonstrate how to connect a circuit to test disparate pins and ports for output to get ready for sending a byte to those pins.

Elevator music attribution:
Local Forecast - Elevator Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/by/3.0

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

You can find the Character Displays on Amazon at the following links (all with the HD44780 controller necessary to use with the tutorial):
16x2 LCD: amzn.to/2rbQmvX
20x4 LCD: amzn.to/2t0ocFw

These displays are also available at newbiehack.com

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●


Please consider contributing subtitles in your language to this video:
youtube.com/timedtext_video?ref=share&v=micDbBN9s9k

Visit the Newbiehack.com website:
newbiehack.com

Purchase the tools necessary to complete these tutorials:
newbiehack.com/Categories/ARM



Equipment that I use to make videos:
Canon EOS Rebel: amzn.to/2rJSeh0
Macro Lens: amzn.to/2qaSKmK
Microphone: amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): amzn.to/2ruFnSn
The drafting pencil I use on these videos: amzn.to/2qioYg2
15. How to Interface an LCD to an ARM Microcontroller Part 2VLOG 1 - Sticking a Laser to the Fab Pro CNC Router - The MountsBuildYourCNC Product Video: 24V 1A Power SupplyHow to Connect and Configure a Home Switch on the PoKeys57CNC Controller | Step-by-Step Guide41. How to use Timers Counters and the Prescaler on the STM32 ARM MicrocontrollerSTM32 OLED and 2000g Accelerometer Experiments   Got the hammer out for the extreme testingblackTooth v2 Assembly Instructions Part 5STM32 Multi Channel ADC Continued & OLED (128x64) Display SetupCustomer Order No.47237 PRECIX CNC Electronics RetrofitCNC Electronics for a customer. Chat in Discord. Link in Desc.#5 ARM STM32 Microcontroller Tutorial - The 4 Basics to Control ALL!!Pokeys57CNC and Mach4 Part 3: Connecting the E-Stop and Limit Switches
BuildYourCNC |

15. How to Interface an LCD to an ARM Microcontroller Part 2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER