Uploaded October 2025 | Updated September 2026, 2 weeks ago
*** Pick up the M7 Pro today: tidd.ly/4mKpgYg ***
In this review, I take a deep dive into the Anycubic Photon Mono M7 Pro resin 3D printer to see if it really lives up to the "Pro" name. With a massive build volume, 14K resolution, automatic resin fill and drain, a heated vat with circulation, and smart features like failure detection, the M7 Pro promises both convenience and professional-level results at a surprisingly affordable price. In this video, I’ll walk you through setup, software, test prints, and real-world performance so you can decide if this is the right resin printer for your workshop.
---------------------------------------------------------------------------
👀 See more information about the Anycubic Photon Mono M7 Pro (Affiliate Links):
M7 Pro Printer: tidd.ly/4mKpgYg
M7 Pro + Wash & Cure 3 Plus Combo: tidd.ly/3WhsiZo
M7 Pro + Wash & Cure 3 Max Combo: tidd.ly/4pRc3zV
---------------------------------------------------------------------------
Find accessories and replacement parts for the M7 Pro (Affiliate Links):
ACF Film Replacements (2-pack): tidd.ly/46wSdlS
Replacement Screen Protector: tidd.ly/46zQexd
Non-temperature controlled vat: tidd.ly/4o4FU69
Temperature controlled vat: tidd.ly/4gPinDO
---------------------------------------------------------------------------
Create a free profile at 3dprintlog.com today, and start recording all your print settings and filament usage!
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists! (Affiliate Links)
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering Youtube/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Rode NT1 Microphone: amzn.to/4i3frmB
Thank you to all my Patreons for helping make these videos possible. Join me at patreon.com/HoffmanEngineering
Special thanks to my tier 2 and above patrons:
* Reese N.
* Gary
Christopher Hoffman
Hoffman Engineering
https://www.hoffman.engineering
[00:34] Anycubic Photon Mono M7 Pro Disclaimer
[00:54] M7 Pro Specs Overview
[01:03] Build Plate and Print Volume
[01:48] 14K Screen and UV Light System
[02:39] Heated Resin Vat with Circulation
[03:39] Automatic Resin Fill and Drain
[04:41] Resin Vat Drawbacks Explained
[05:40] Resin Bottle Cap Compatibility
[06:09] Touchscreen and I/O Ports
[06:27] Smart Features and Fail Detection
[07:16] Wash and Cure Station Options
[07:43] Assembly and Setup Guide
[08:33] Photon Workshop Software Review
[09:09] Chitubox Slicer with M7 Pro
[09:28] Anycubic App Remote Control
[09:43] Print Examples Showcase
[10:01] Vase Sample Print Quality
[10:24] Tall Tower Speed Test
[10:45] Chitubox Calibration Print
[11:09] Magic Lamp Print Example
[11:21] Full-Size Mask Print Test
[11:55] Vaelira the Soulbinder Figure
[12:05] Miniature Prints in Grey Resin
[12:13] Black Resin Joyful and Bearded Yells
[12:35] Shadow of the Blood Moon Diorama
[12:50] Eiffel Tower Print Test
[13:05] Extra Black Resin Miniatures
[13:13] Final Thoughts and Conclusion
[14:41] Photon Mono M7 Pro Pricing
[15:26] Outro and Subscribe
#Anycubic #resinprinting #3dprinting
*** Pick up the M7 Pro today: tidd.ly/4mKpgYg ***
In this review, I take a deep dive into the Anycubic Photon Mono M7 Pro resin 3D printer to see if it really lives up to the "Pro" name. With a massive build volume, 14K resolution, automatic resin fill and drain, a heated vat with circulation, and smart features like failure detection, the M7 Pro promises both convenience and professional-level results at a surprisingly affordable price. In this video, I’ll walk you through setup, software, test prints, and real-world performance so you can decide if this is the right resin printer for your workshop.
---------------------------------------------------------------------------
👀 See more information about the Anycubic Photon Mono M7 Pro (Affiliate Links):
M7 Pro Printer: tidd.ly/4mKpgYg
M7 Pro + Wash & Cure 3 Plus Combo: tidd.ly/3WhsiZo
M7 Pro + Wash & Cure 3 Max Combo: tidd.ly/4pRc3zV
---------------------------------------------------------------------------
Find accessories and replacement parts for the M7 Pro (Affiliate Links):
ACF Film Replacements (2-pack): tidd.ly/46wSdlS
Replacement Screen Protector: tidd.ly/46zQexd
Non-temperature controlled vat: tidd.ly/4o4FU69
Temperature controlled vat: tidd.ly/4gPinDO
---------------------------------------------------------------------------
Create a free profile at 3dprintlog.com today, and start recording all your print settings and filament usage!
---------------------------------------------------------------------------
👀 See my recommended printers, filament, and accessories on my Amazon Idea Lists! (Affiliate Links)
🆕 3D Printing Equipment for Beginners: amzn.to/2PNblSL
⚡ 3D Printing Equipment for Intermediate Hobbyists: amzn.to/2OOuQOy
💯 3D Printing Equipment for Advanced Users - Liquid Resin SLA/DLP: amzn.to/2PpqWuK
🎁 See the TEVO Tornado on Amazon: amzn.to/2TnhQhn
🎥 Hoffman Engineering Youtube/Video Equipment - See on Amazon: amzn.to/2O9oP9I
🆕 Microphone - Rode NT1 Microphone: amzn.to/4i3frmB
Thank you to all my Patreons for helping make these videos possible. Join me at patreon.com/HoffmanEngineering
Special thanks to my tier 2 and above patrons:
* Reese N.
* Gary
Christopher Hoffman
Hoffman Engineering
https://www.hoffman.engineering
[00:34] Anycubic Photon Mono M7 Pro Disclaimer
[00:54] M7 Pro Specs Overview
[01:03] Build Plate and Print Volume
[01:48] 14K Screen and UV Light System
[02:39] Heated Resin Vat with Circulation
[03:39] Automatic Resin Fill and Drain
[04:41] Resin Vat Drawbacks Explained
[05:40] Resin Bottle Cap Compatibility
[06:09] Touchscreen and I/O Ports
[06:27] Smart Features and Fail Detection
[07:16] Wash and Cure Station Options
[07:43] Assembly and Setup Guide
[08:33] Photon Workshop Software Review
[09:09] Chitubox Slicer with M7 Pro
[09:28] Anycubic App Remote Control
[09:43] Print Examples Showcase
[10:01] Vase Sample Print Quality
[10:24] Tall Tower Speed Test
[10:45] Chitubox Calibration Print
[11:09] Magic Lamp Print Example
[11:21] Full-Size Mask Print Test
[11:55] Vaelira the Soulbinder Figure
[12:05] Miniature Prints in Grey Resin
[12:13] Black Resin Joyful and Bearded Yells
[12:35] Shadow of the Blood Moon Diorama
[12:50] Eiffel Tower Print Test
[13:05] Extra Black Resin Miniatures
[13:13] Final Thoughts and Conclusion
[14:41] Photon Mono M7 Pro Pricing
[15:26] Outro and Subscribe
#Anycubic #resinprinting #3dprinting
