Uploaded January 2019 | Updated September 2026, 1 day ago
This is Pops custom bagger named "spooky", with a 135 CI Rob Shopf motor dyno'd at 4200 ft elevation, ending up with 142 HP, and 142 lb ft of torque. It makes 140 lb ft of torque at 2500 RPM, and takes 2.5 seconds less to hit max HP compared to pre-tune. Rev limit set to 6,000 rpm, multispark enabled with race advance curve set to 5 . 160 main, 32.5 pilot with screw 1/2 turn out, and needle in #2 position with washer on top. Accelerator pump timing for initial spray just after slide moves, and shuts off quickly, #70 nozzle.
This is Pops custom bagger named "spooky", with a 135 CI Rob Shopf motor dyno'd at 4200 ft elevation, ending up with 142 HP, and 142 lb ft of torque. It makes 140 lb ft of torque at 2500 RPM, and takes 2.5 seconds less to hit max HP compared to pre-tune. Rev limit set to 6,000 rpm, multispark enabled with race advance curve set to 5 . 160 main, 32.5 pilot with screw 1/2 turn out, and needle in #2 position with washer on top. Accelerator pump timing for initial spray just after slide moves, and shuts off quickly, #70 nozzle.
