[13]  Fluid acrylic :  Awesome CELLS and LACING in a double swipe (first swipe ever!) @MyriamsNature
[13]  Fluid acrylic :  Awesome CELLS and LACING in a double swipe (first swipe ever!)  @MyriamsNature
Uploaded July 2017 | Updated November 2026, 1 hour ago
Step-by-step : two white swipes done on Yupo paper.
- Cells of all sizes appear with and without the torch.
- Close-ups shown of the piece when wet and when dry.
- Results discussed.

To see products I use, love and recommend for fluid painting (and to possibly discover new products 😊) :
amazon.com/shop/MyriamsNature

If you would like to help me buy supplies for these videos here is a link: PayPal.me/MyriamsNature
I thank you in advance for wanting to keep this channel going. It means a lot to me.

-=- The squeeze bottles I use the most, and get asked about, are "Darice Needle Tip Applicator Bottles" ... They hold one ounce of paint each. I purchased mine at JoAnn ... They are sold in packs of 6 bottles.

A pack of 12 can be found on Amazon: amzn.to/2xyILPN

-=- This is my usual formula for all the paints I use:

- 1 - 2 parts paint to 5 parts Floetrol

- I then add a little water if necessary to get my paint to be the consistency of really warm honey, or like heavy cream. The amount of water will depend on the type of acrylic paint you used ... Flow acrylic (runny like house paint) will need very little water if any, while medium to heavy body paint (thick like toothpaste) will need more water. Try to limit the amount of water that you use ... too much will break down the binding properties of the acrylic paint. How much is too much? Try to keep the amount of water under 50% of the amount of paint.

- Finally, right before I prepare my dirty pour, I add a few drops (3 to 6 drops) of silicone into each color EXCEPT the white (or whatever negative space color you choose). The fact that the white has no silicone encourages the other colors to bleed into the white and "cell" up.

-=- My favorite silicone is "3 in1 All Temp Silicone", available at most hardware stores. You can also get it here: amzn.to/2fyKPwr
The reasons I prefer it are:
- because it dries .... leaves virtually no oily residue once a painting has dried
- has no fumes like the spray silicones
- comes in a super convenient applicator bottle (with a cap that stays attached!)
But, any silicone you have should get you cells.

-=- Once my paintings dry, I spray them with a low odor, user-friendly, crystal clear, museum-quality varnish designed for acrylics, oils and watercolors. It gives a glossy finish.
Here is a link: amzn.to/2jGh3KO

When I want to spray a matte/satin finish instead, I use this: amzn.to/2fvgYF0


Thank you in advance for watching the videos, sharing them, commenting and leaving a thumbs up. Your kindness helps my channel continue and it is all greatly appreciated! May the alcohol inks, resin, and paints be kind, and may the pours be with you. 😊💕
[13]  Fluid acrylic :  Awesome CELLS and LACING in a double swipe (first swipe ever!)187] RESIN Jewelry: Easy Pressed Flower Bangle for Beginners - Done On a Background99] TWO Satin Enamel Acrylic Pours - Lovely CELLS - No SILICONE (Subdued Cloud Effect)144] DIY Resin Coaster with ALCOHOL INK - Easy, SPARKLY,  & LAYERED  - [Gorgeous Flipside]7] 🌊🏝 How to ACRYLIC POUR a BEACH with 2 DIRTY POURS - Ocean Waves in a Fluid Acrylic painting52]  Using ALCOHOL INKS on BLACK or Dark SURFACES - Easy Flower TUTORIALMyriams Nature Live Stream26]  Simple PRETTY dirty pour SWIRL ... Fluid acrylic painting181] ALCOHOL INK Technique 🌳 VERY 3D Trees - part 2 - Adding the Shading for the 3D Look152] Alcohol Ink : How to Paint a Bird on a Flowering Branch66] Alcohol Inks on CANVAS - Fun Tutorial: Finishing the Landscape Painting so that it can HANG !90] Ornament Tutorial JAM-PACKED with Tips & Techniques - Resin, Microfine Glitter & Acrylic Skin
Myriams Nature |

[13] Fluid acrylic : Awesome CELLS and LACING in a double swipe (first swipe ever!)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER