CanadianWintersIn this instructable/video, I've built a voltmeter to measure high voltages DC (0-100v) with relative precision and accuracy using an Arduino Nano.
This is my second attempt of building a precise volt meter and I am quite happy with the outcome.
The test measurements I took were accurate enough, mostly within 0.1v of the actual voltage measured with a standard voltmeter (I used an Astro AI DM6000AR). This is close enough for my intended use of the device.
To archive this I used a 16 bit ADC converter.
There was no need to smooth or average the readings in this project. It was much easier than the previous one.
EDIT: Check the new self-powered version here: youtu.be/efVIn45N-8A ========================================================
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.
Arduino Precise High Voltage meter(0-100V DC) with an ADS 1115 - 16bit ADC | Code in the descriptionCanadianWinters2020-06-12 | In this instructable/video, I've built a voltmeter to measure high voltages DC (0-100v) with relative precision and accuracy using an Arduino Nano.
This is my second attempt of building a precise volt meter and I am quite happy with the outcome.
The test measurements I took were accurate enough, mostly within 0.1v of the actual voltage measured with a standard voltmeter (I used an Astro AI DM6000AR). This is close enough for my intended use of the device.
To archive this I used a 16 bit ADC converter.
There was no need to smooth or average the readings in this project. It was much easier than the previous one.
EDIT: Check the new self-powered version here: youtu.be/efVIn45N-8A ========================================================
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Bambu Lab P1P: Creating Your Own Unique Marble Run Experience with 3D PrintingCanadianWinters2023-01-22 | Marble Run Printed using Bambulab P1P 3D Printer. 0.2 mm layer height.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anythingUnleash Your Creativity: Design and 3D Print Your Own Vise with BambuLab P1PCanadianWinters2023-01-15 | Printed using Bambulab P1P 3D Printer. 0.2 mm layer height.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything20 Inch Studded Fat Tires - RadRunner Rad Power BikesCanadianWinters2022-11-27 | 20 Inch Studded Fat Tires - RadRunner Rad Power Bikes
In this video I show how you can use motorcycle tires and stud them for winter use. They fit a 20 inch fat tire bicycle rim (original tires 20 x 3.0 - 20 x 4.0 ) perfectly. Motorcycle and Bicycles use different wheel diameter references so that a 16 inch motorcycle tire is the same diameter as a 20 inch bicycle tire.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything
Radrunner Ebike E-bike snow tires bicycle bike iceConfederation Park to Bowness Park - Exploring Calgary Bicycle PathsCanadianWinters2022-09-12 | This is a brief video showing the bicycle paths in Calgary. In this episode, I ride my bike from Confederation Park to Bowness Park via University of Calgary, Market Mall and Baker Park.
The video has been sped up to shorten the length.
Did you know that Calgary has more than 1000km (one thousand!) of paved pathways?
Video filmed in Calgary, Alberta, Canada - September 2022 --------------------------------------------------
Some of the gear used in this video [Amazon Affiliate Links]:
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anythingExploring Calgary Bike Paths - Radrunner eBike!CanadianWinters2022-07-20 | In this video I ride my Radrunner 1 e-bike from Rad Power Bikes on the city of Calgary bicycle paths. Did you know that Calgary has more than 1000km (one thousand!) of paved pathways?
Video filmed in Calgary, Alberta, Canada - June 2022 --------------------------------------------------
Some of the gear used in this video [Amazon Affiliate Links]:
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anythingArduino battery tester (e-bike batteries / RV / power walls)CanadianWinters2022-02-05 | Testing out my latest project. It's a battery tester where I can input custom parameters for the discharge and for the test to automatically stop. Still working on the code but pretty decent results so far 😃 .
This can test batteries up to 100v and current can be set up to 30 A constant ( possibly even more). I would need to change the sensor with a better one and upgrade the wiring and load resistors.Driving in a Snow Storm - Calgary to Canmore - December 2021CanadianWinters2022-01-01 | Video showing Driving conditions on snowy roads in Alberta, Canada. Drive between Calgary and Canmore during a snow storm. The weather and road conditions can change very quickly!
Recorded on December 2021. --------------------------------------------------
Some of the gear used in this video [Amazon Affiliate Links]:
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anythingDriving on Snowy Roads at 5 AM and -15C/5F ! Alberta December 2021CanadianWinters2021-12-15 | Video showing Driving conditions on snowy roads in Alberta, Canada. Some of the roads were still covered with fresh show from a 4AM snowfall.
Recorded on December 2021. --------------------------------------------------
Some of the gear used in this video [Amazon Affiliate Links]:
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything2021/22 Ski & Snowboards season Start! Alberta, CanadaCanadianWinters2021-11-22 | This video was filmed and edited by my friend Rob. Check out his channel here: youtube.com/channel/UCT7wAZWGreNMzCRVtJoODEQ
This video was filmed in Kananaskis in November 2021.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anythingArduino self-powered Volt Meter (12-90v DC) - Code & Tutorial in DescriptionCanadianWinters2021-10-11 | In this instructable/video, I've built a voltmeter to measure high voltages DC (12-100v) with relative precision and accuracy using an Arduino Nano, an ADS 1115 ADC, a dc/dc converter, and an Oled Display.
This is very similar to one of my previous instructable/video but in this case, the voltmeter does not need any external power supply.
You can find the complete instructable tutorial & code here:
I used a 3D printer to print the box. I created the.STL file in Openscad and then imported it into Tinkercad to create the holes for the OIed display and wiring.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Build a18650 battery, NO Spot Welder requiredCanadianWinters2021-01-09 | In this video, I build a 18650 lithium battery without a spot welder.
Material and tools used in this video:
Soldering Station (Hakko, not in the video but nonetheless my favorite):
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.
#18650 #battery #liionWaveshare E-ink Display Precise voltmeter (0-90v DC) with Arduino Nano - Code includedCanadianWinters2020-11-09 | In this video, I use a 2.9’’ Waveshare E-Paper display with an Arduino Nano, a voltage divider and an ADS1115 to display precise voltages up to 90 volts DC on the E-Paper Display.
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.E-Paper Display Partial Refresh With Arduino - With CodeCanadianWinters2020-10-10 | In this instructable/video, I use a 2.9’’ Waveshare E-Paper display with an Arduino Nano to display a floating value on the screen. The project (instructable) and the code are available at this link: instructables.com/E-Paper-Display-Partial-Refresh-With-Arduino ========================================================
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate I earn from qualifying purchases, even if you buy something else--and it won't cost you anything. Music: www.bensound.comVanlife - Australia 2008CanadianWinters2020-06-06 | Video of my Vanlife (I am not sure if it was called "Vanlife" back in the day...) adventures back in 2008 in Australia.
I traveled and lived in a little Toyota TownAce for more than 6 months, camping in the wilderness, at the beach, parking lots, the bush, rest areas and a few campgrounds.
#Vanlife #Australia #AdventuresPrecise & Accurate Voltage Arduino | With CODECanadianWinters2020-05-23 | In this instructable/video, I've built a voltmeter to measure high voltages DC (0-90v) with relative precision and accuracy using an Arduino Nano.
The test measurements I took were accurate enough, mostly within 0.3v of the actual voltage measured with a standard voltmeter (I used an Astro AI DM6000AR). This is close enough for my intended use of the device.
To archive this I used a voltage reference (4.096v) and voltage divider.
On the code side, I used, of course, the "external reference" option for the Arduino Nano and the "Smoothing" example in the Arduino tutorials.
Also check the second video I made about precise voltage using an Arduino: youtu.be/10QtHh6UNBs ========================================================
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Crackling Fire - Relaxing Audio - 1 Hour longCanadianWinters2020-05-17 | The sound of Crackling Fire - Relaxing Audio - 1 Hour longCuba - Street Music in TrinidadCanadianWinters2020-05-10 | Street music in a public plaza in Trinidad, Cuba.Skiing At Sunshine Village - Alberta, CanadaCanadianWinters2020-05-03 | Skiing at Sunshine Village with a friend back in 2014. Beautiful day!Short Video - Winter Drive in Kananaskis, Alberta - Beautiful CanadaCanadianWinters2020-05-02 | Short Video - Winter Drive in Kananaskis, Alberta - Beautiful Canada - This is just a preview.Relaxing Audio - Waves clashing on the beach - 1 Hour longCanadianWinters2020-05-02 | Relaxing Audio - Waves clashing on the beach - 1 Hour long
Good for relaxing and meditation.
Enjoy :)Rain and thunder - Relaxing Audio - 54 minutes longCanadianWinters2020-05-01 | Relaxing Audio of rain and thunder in the distance.
Good for sleep, relax, chilling, stress relief, meditation.Dell E7440 Headphones Delay Issue FixCanadianWinters2019-03-26 | This video will show you a little trick to eliminate the audio delay when using headphones on a Dell Laptop. My Laptop is a Latitude E7440 but other Dell models are affected. This seems to be a driver issue affecting Windows 10 machines. At this stage no driver is available to eliminate the issue.
Despite people claiming to have the issue resolved by updating the drivers and the BIOS, the issue goes away for a bit and then comes back.
Tags: dell,e7440,audio delay,audio issue,audio,issue,fix,headphones,stopping,laptop,driver,BIOS,realtek,drivers,windows,10,windows 10,window,sound,sounds,lag,audio lag,earphones3D Printing a Vase with PETG FilamentCanadianWinters2016-04-23 | Just a quick video of my 3d printer making a little vase with a PETG filament.
Video is accelerated 20x.
Impressed with PETG quality and no warping so far.
Enjoy :)Fernie - Trees and powder - Dec 2014CanadianWinters2014-12-14 | ...Nakiska Nov 15 2014 - Groomed RunCanadianWinters2014-11-16 | ...Nakiska Nov 15 2014 - PowderCanadianWinters2014-11-16 | ...Back Country Skiing - Nov 8 2014CanadianWinters2014-11-09 | ...Home made battery discharger - 1st prototypeCanadianWinters2014-08-03 | This is the first prototype of my home made battery discharger.
The final version will be able to discharge at constant 30A / 300W, (limited to 300W depending on components).
Functions:
- Up to 300W continuous discharge - Maximum voltage 100v (depending on MOSFETS, can be higher) - Constant Current or Constant Power discharge - Menu to set discharge modes/current/power and lvc - Discharge data (Ah and Wh) Saved on eeprom, will stay on memory until reset
Tools, Equipment and components used (partial list):
---- CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Offroad GNG V1CanadianWinters2014-07-30 | Offroading with my Electric DH MTBSkiing @ Old Goat Glacier -21 June 2014CanadianWinters2014-06-22 | ...Nose Hill ParkCanadianWinters2014-06-07 | ...Norco Drop GNG Kit 19s 30ACanadianWinters2014-05-25 | Electric Mountain Bike.
Norco Drop with GNG kit V1 (belt) running on 19s li-ion (68.4v nominal) and 30A sensorless controller.ebike ride April25 2014CanadianWinters2014-04-26 | This is my commute to work. It's about 12km, most of it on the bike path. Turning on captions you can see the gps data (speed, time altitude etc.)Ebike computerCanadianWinters2014-04-13 | Latest version of my ebike computer.Building a 6s9p battery using 18650 cells - TimelapseCanadianWinters2014-03-07 | In this video I build a 6s9p battery using 54 18650 li-ion cells. About 24,000 photos were used to generate this timelapse.
This battery is part of a bigger battery. The full battery is 14s9p. 50.4v 23.4Ah nominal. I am using this battery on my electric bicycle and it works really well.
If you are using the proper materials and tools you don't need a spot welder to solder 18650's type cells.
I used a Hakko Fx-888 soldering station and good quality solder wire. Remember to sand the surface of the cells' electrodes before soldering as they are coated with a chemical that prevents solder to stick.
Tools, Equipment and components used (partial list):
---- CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Castle Mountain. Feb-22-2014CanadianWinters2014-02-23 | ...Sunshine. The head wall 1st attempt Jan/25/2014CanadianWinters2014-01-26 | ...Sunshine - Angel + TeePee Black Diamonds Jan/25/2014CanadianWinters2014-01-26 | ...Sunshine. Jack Rabbit Jan/25/2014CanadianWinters2014-01-26 | ...Sunshine. Goats Eye/Hells Kitchen, Double Black Diamond Jan/25/2014CanadianWinters2014-01-26 | Sunshine. Goat's Eye/Hell's Kitchen, Double Black Diamond Jan/25/2014
CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Ebike Ride January 2014CanadianWinters2014-01-18 | Nice and warm winter day,a short ride in the neighborhood.TrailerCanadianWinters2013-12-29 | ...Arduino Ebike computer with menus to preset settingsCanadianWinters2013-12-29 | This is my ebike computer based on Atmega 328 (Arduino).
Here you can see different screens where values are displayed. On some screens is possible to change some variables such as the number of cells in the battery, LVC and HVC of the cells to calculate the charge of the battery in %, the Ah of the battery so that the estimated distance left in the battery can be calculated depending on the Ah used.
The settings values are saved in the eeprom so there is no need to reprogram/reset everything after the ebike computer has been turned off.
Tools, Equipment and components used (partial list):
---- CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Ebike Ride Dec/26/2013CanadianWinters2013-12-26 | Testing my brand new Gopro Hero 3 silver on my helmet. Camera is set at 720p 60fps. Just riding around my neighborhood.Arduino master and 2 attiny85 slaveCanadianWinters2013-12-15 | In this video, an two Attiny85 are connected to an Atmega328 and an LCD screen.
Each of the attiny85 is measuring the voltage of a single lithium-ion cell. The data is sent over the I2C bus to the Atmega328 that displays the voltage on the LCD screen.
So far the voltage measure is consistent and quite accurate (provided that Vcc is measured and taken into account in the code).
---- CanadianWinters is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn fees by linking to Amazon.com and affiliated sites. By using these links, as an Amazon Associate, I earn from qualifying purchases, even if you buy something else--and it won't cost you anything.Ebike LED strip using AtTiny85CanadianWinters2013-11-25 | This is an LED strip that I built using 24 red SMD LED, some pvc tubing and wire from an ethernet cable.
I built this as I often commute to work on my bicycle and despite having some good LED lights on the front and back of the bike, they are not enough to make you visible especially on the road among car traffic. I hope this LED strip adds some visibility.
The LED flashing is controlled by an Attiny85 and a button. I used a transistor as an output as the LED strip uses 12V and about 100mA, the Attiny85 is powered at 5v (you must not exceed 5.5v as per specs). I made a little circuit that is powered at 12v, and an LM7805 regulates the voltage to 5v to power the Attiny85. The Attiny85 controls the switching on/off of the transistor that powers on/off the LED strip.Cell-log LVC ProjectCanadianWinters2013-11-02 | In this video you can see the low voltage cutoff done using the alarm port of the cell-logs. Each alarm port on the cell log is isolated by an optocoupler.
More info in the videoBalancer circuit smd for li-ion/lipo cells test.CanadianWinters2013-10-26 | In the video is my balancer circuit for li-ion/li-po cells. The circuits starts balancing (bleeding) the cells when the cell reaches 4.15v. The draining current is 0.7-1.0A. Each cell is balanced individually. When the LED is lit it means that the cell is being balanced.5s Li-ion/Li-po Balancer - Full balance test videoCanadianWinters2013-10-13 | In this video you can see how the balancer for li-ion and li-po cells that I just built works.
Balancing starts at 4.15v. At the beginning the difference between cells is 270mV. At the end is about 19mV.
For more info visit www.jacopo.tk or contact me through that same website.