247printing | 1000mm/s: Movement Test #shorts @247printing | Uploaded June 2021 | Updated October 2024, 1 hour ago.
Watch the 1100mm/s PRINT:
youtube.com/shorts/oy9C-VDsu-k?feature=share

I started my build with a kit from Formbot:
https://s.click.aliexpress.com/e/_AD5kIa

💚Pizza, Beer and Coffee helps me going on💚
paypal.me/247printing
💚Thanks to all who support/ed my work💚

Support my work at Patreon:
patreon.com/247printing

My Instagram and Twitter - more about my doings and behind the scenes:
Instagram: instagram.com/247printing
Twitter: twitter.com/247_printing


REAL 1000mm/s for around 80mm of movement! Rest is acceleration/deceleration.

Slow motion at 10% speed.
Watch the belts at the rear 🧐


Xxxx ALL DESIGNS AVAILABLE SOON xxxX
@ Voron Users / Thingiverse


Firmware: #Klipper

Motors: OMC Nema14 (54mm length)
Acceleration: 40.000mm/s/s
Speed: 1000mm/s
Current: 1.6A

Movement lengths:
X / Y: 115mm
Diagonal: 163mm


*******UPGRADES* STAGE 1 on my Voron V0 - VIDEO DEEP DIVES and ANALYSES incoming:


—MOTION (Part 1: Video Deep Dive)

Nema14 spec Voron V0.1 @1.7A (OMC 14HS20-1504S)
amzn.to/3kBO5tm

F623 bearings instead of toothed idlers
amzn.to/2UktSgZ

WD40 specialist dry lubricant for rails
amzn.to/3ziGaF4

Gates-LL-2GT 6mm belts
amzn.to/3kCaAht


— EXTRUSION: (Part 2: Video Deep Dive)
Slice Engineering Mosquito Magnum (5% off!): https://www.sliceengineering.com?p=rkjO5IsbY

VolcoMosq Block (+9mm melt) by Nitram youtube.com/watch?v=_2xph8QkcpU&t=18s

E3D Hemera (Bowden config)
amzn.to/3zdvAzk

Capricorn Bowden Tube
amzn.to/3kBrgWE

50W heater (24V)
amzn.to/2UmOIwa

PT1000 temp sensor
amzn.to/3ivfdY2

Boron Nitride Paste @ heater, thermistor and heat break
amzn.to/3kvPem6


— COOLING (Part 3: Video Deep Dive)
4010 blower fans (24V), updated toolhead
amzn.to/3irazKT

optimized air ducts for part cooling with aluminium tape insulation
amzn.to/3zhbuEs

External Static Cooling: 4x4020 fans (24V)
amzn.to/3zcap0D

4x40mm heatsink at AB stepper motors
amzn.to/3irvLAh

4020 fans (5V) at heat sinks (stepper motors)
amzn.to/3wOmfMJ

25mm axial fan (5V) for stepper drivers
amzn.to/3eDf4AW


— Software / Firmware / Controllers (Part 4: Video Deep Dive):

Klipper
klipper3d.org

Raspberry Pi Zero W (Mainsail)
amzn.to/3xR9l21

Raspberry Pi 3B (Input Shaping and Octoprint)
amzn.to/2UwIMAu

Alternative: Raspberry Pi4:
amzn.to/3kBt4io

Simplify 3D: multi processes used
simplify3d.com

Filament I use: ESUN ABS+:
amzn.to/3Bi0x7k


------------------------------------
My modest video gear:
------------------------------------

iPhone 11 Pro: amzn.to/2VZYswJ
Smartphone video rig: amzn.to/3iriub5
GoPro Hero 9: amzn.to/2UZI9Q5
FLIR ONE PRO: amzn.to/2UWAe67
Similar to the soft boxes I use: amzn.to/3xRes2d
Similar to the tripod I use: amzn.to/2V1I6mw

*Amazon links are affiliate links at no extra costs for you.

#JoinTheSpeed
#247printing
#SpeedBoatRace
#volcomosq
#shorts