Uploaded October 2017 | Updated September 2026, 2 weeks ago
Thank you to everyone who has watched and subscribed! I really appreciate it.
In this video I talk about the giveaway items and how to enter. I also mention a few upcoming tools, a website, black japanning, Patreon and a Q&A session.
You can post your questions in the comments and I will try and answer them in an upcoming video. Contest will be open for about a month.
You can also send me tools for restoration at:
PO Box 23002
Market Mall
Saskatoon, SK, Canada
S7J5H3
Demonetization would make restoration videos more difficult to make. Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
Thank you to everyone who has watched and subscribed! I really appreciate it.
In this video I talk about the giveaway items and how to enter. I also mention a few upcoming tools, a website, black japanning, Patreon and a Q&A session.
You can post your questions in the comments and I will try and answer them in an upcoming video. Contest will be open for about a month.
You can also send me tools for restoration at:
PO Box 23002
Market Mall
Saskatoon, SK, Canada
S7J5H3
Demonetization would make restoration videos more difficult to make. Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
![1920s Maytag Washing Machine Engine [Restoration]](https://i.ytimg.com/vi/t_egp4Hqc8Q/mqdefault.jpg "1920s Maytag Washing Machine Engine [Restoration]
And so begins the restoration of the gas-powered washing machine! This restoration is on a 1929 No. 92 Maytag Multi-Motor. These hit and miss engines are actually quite common with around 600,000 made between 1927 and 1937 in Newton, Iowa, USA. These motors originally powered washing machines for clothes, but were also put on things line lawn mowers and toy race cars.
The restoration on this particular motor was a lot of fun as I had a secondary motor for parts as well as access to brand new parts that are still made today. It is an excellent project for someone wanting to restore a small engine.
I decided to change the paint scheme just a bit from original, but I really like how it turned out. Obviously, I was disappointed at the motor exploding at the end, but luckily I had a replacement part! The carburetor needed the most work as it was not in the best condition. I decided to give all painted surfaces a coat of clear fuel-resistant paint, just in case.
I am super excited to put this thing on a restored washing machine, which is what I plan on doing next! The new parts were made by Flywheel Supply.
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/")
![1900s Pedal Metal Lathe [Restoration]](https://i.ytimg.com/vi/u71kzF1XfQM/mqdefault.jpg "1900s Pedal Metal Lathe [Restoration]
This restoration is on an early 1900s W.F. and John Barnes Co. No. 5 velocipede screw lathe. James from the @WoodByWright YouTube channel came to my shop with two of these lathes; one for me and one for him. We both absolutely love the look of this lathe and he plans on using his frequently in his workshop.
The lathes were missing many parts and James had them re-cast while I did the machining on them. The lathes were both is better than expected condition for being over 100 years old. I decided to paint mine black which was consistent with the original japanning used for a finish on this lathe. If I had sorted out my cold-cure japanning recipe, then I would have loved to do japanning on this restoration. We only had three days together, so after we put primer on the parts, James had to leave.
James kept the only 3-jaw chuck, as he plans on using the lathe on a regular basis, so I had to do some test cuts using the old drill chuck. This was a poor choice and the cut quality was horrendous. Pedalling the lathe is actually pretty fun for about 25 seconds until you start cutting and you have to start pedalling with some serious force. This lathe could easily be converted to an electric powered one and it would make a pretty nice 11 lathe.
I am not sure what to do with the lathe now as I really wont use this over my other metal lathe! I had an amazing time with James and I hope to visit his shop one day as well.
You can see an advertisement for this lathe here: https://imgur.com/hVdlVut
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/")
![Antique Vertical Steam Engine - Part 1 [Restoration]](https://i.ytimg.com/vi/ucRF42U_ZFk/mqdefault.jpg "Antique Vertical Steam Engine - Part 1 [Restoration]
This restoration is on a 1920s Orr & Sembower vertical steam engine. It was apparently found in a river in Kansas, USA before being shipped to me. This steam engine is one of the worst condition items to ever come across my workbench. I have not worked on a steam engine before, so this will be a fun learning experience.
In Part 1, I completely disassemble what is remaining of the steam engine and start to work on remaking all the missing parts. At some point, it was stripped for bronze or brass scrap metal, so almost all of those parts will need to be replaced. This includes the bronze shoes on the crosshead, as well as all the steam fittings and fasteners.
After rust removal, I can see the steam engine used to be black and that there is significant wear in all of the babbitt bearings, so they will need to be re-poured. The piston and piston rings are damaged and will both need to be replaced. The main shaft is too deteriorated to be salvaged and the eccentric has an improperly fit repair.
At this point, if this steam engine can be brought back to life, I will be very impressed.
Wrenches and screwdrivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with Jimmy DiResta and Andrew Alexander) - https://anchor.fm/fitzall")
![Hand-Cranked Grinder [Rescue]](https://i.ytimg.com/vi/urPF3MJtvjc/mqdefault.jpg "Hand-Cranked Grinder [Rescue]
https://www.instagram.com/handtoolrescue/ for upcoming projects.
This grinder was not moving smoothly and needed some rust removal. It still needs a proper handle and to have the grinding wheel dressed or replaced. There were no maker marks on this one.")
![Antique Check Perforator [Restoration]](https://i.ytimg.com/vi/uvAO6lh0h1I/mqdefault.jpg "Antique Check Perforator [Restoration]
This restoration is on an antique check/cheque perforator made by the B.F. Cummins Co. This tool was patented in 1918 and the original patent document can be seen here: https://patents.google.com/patent/US1285837A
The perforator was recently sent to me by a viewer and was interesting enough to try and restore right away. It was used to cancel checks by marking them with the word PAID and the date.
I decided to give the tool a brand new coat of japanning as that was the original finish. I ended up using 3 coats of japanning on all castings. The punch plate for the perforator was made out of aluminum and most of the pins were incredibly stuck. For some reason, the pins are surrounded by an incredible amount of solder, for no discernible reason. The brass rings help index the proper date to perforate the paper and must have been an absolute nightmare to machine. I had to nickel-plate a bunch of parts for this machine as well.
In the end it worked well and I wish it could do letters as well as that would much more fun!
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/")
![Power Hacksaw [Restoration]](https://i.ytimg.com/vi/v7429aWOTF8/mqdefault.jpg "Power Hacksaw [Restoration]
This tool restoration was a unique experience. This is a Model 256 power hacksaw was made by L. Krushel & Sons Ltd. (LKS) of Morden, Manitoba, Canada. I am not sure of the age as there is very little information on this saw, but the motor is from the 1960s. LKS was most known for building high quality welders and produced the first 180AMP welder in Canada. The LKS 180AMP welder is still sought after today, but this hacksaw should not be.
I was not overly impressed with the build quality on this tool, so much so, that I would probably not use it and I do not want anyone else to use it ever again. That is why I decided not to replace the power switch on this tool. The majority of the hacksaw is made with sections of angle iron welded together. I even had to hammer off the slag from the welds for painting, as it was never done the first time around. It was also odd to see shafts with no bushings or bearings around them for support. I imagine heavy use of this machine would wear out these parts very quickly.
There is no way to adjust the feed pressure or to make the cut more straight and square. This must have just been a nice thing to have that would quietly cut metal for further clean-up.
I understand that this tool was built in a time when most tools were starting to be made with cheaper materials and methods for competitive reasons.
I tried to match the colour as best as I could and applied 3 coats of filler primer, 4 coats of blue paint, and 3 clear coats. I used the snap rings I had lying around as I didnt want to buy whole new sets of them just for this application.
With a fresh blade, the saw did cut quite fast, but was not square. If you do come across an old power hacksaw, look for something built better and with adjustment mechanisms.
EDIT: The part of the video where it says Title Text Here was meant to talk about the old power switch location and why I didnt want to replace it.
Also, the bearing was warm while the rod was around -20C. Hopefully, that helped with hammering the bearing on, haha. As shown in the video, I used the old outer bearing race to support the new bearing while I was hammering the wheel onto it. I still need an arbor press.
Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue/")
![Rare Antique Blower [Restoration]](https://i.ytimg.com/vi/v8TKJsKAhLI/mqdefault.jpg "Rare Antique Blower [Restoration]
This thing blows.
In this video I do somewhat of a different restoration than in most of my projects.
This tool seems to be fairly rare as I cannot find very much documentation. The patent can be found here: https://patents.google.com/patent/US986502A/en?oq=986502
The only advertisement I can find is from a 1913 catalogue here: https://imgur.com/a/JfFsyNo
It is an early 1910s Hypress blower and pump made by L. J. Wing Mfg. I believe this company is still in operation. Since this was such a unique piece, I did not want to remove the patina off the brass components as that ruins the historical significance and value. I also chose to repaint the tool with the original black japanning finish that would have been used at the time. This helps make the restoration more authentic than my usual projects.
The design was very simple with only 4 parts making up the blower internals. After a good clean and oiling, the tool worked very well and had enough pressure to blow up some balloons. Apparently, this low pressure blower was used to separate pieces of paper for printing.
Id like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/")
