How To Build a Modern Coffee Table - Woodworking Foureyes Furniture 2022-01-20 | Get your greens today! Go to athleticgreens.com/foureyes to get started on your first purchase and receive a FREE 1-year supply of Vitamin D and 5 travel packs.▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomoneCHECK OUT THE KREG ACADEMY - http://bit.ly/3nMAuPRREFERENCED VIDEOS▸ How To Make Templates - youtu.be/4QYIkBKivMM▸ Coffee Table that uses Hand Made Templates - youtu.be/FAwDwd1ZuMM▸ The Giant Desk Video - youtu.be/GQ_X-XVit_g▸ Tips & Tricks Every Woodworker Should Know - youtu.be/xqlN7mR6LkYThis coffee table was a bit experimental. I knew that I'd be able to build and get the look I was going for, but I was not confident in the strength at all. It has a pretty large cantilevered top. But, I figured it was worth it to give it a shot. If it works, that will give me more confidence in other designs moving forward...and if it didn't work, it'll give me more knowledge about designs moving forward. Either way...it's a win!#Woodworking #DIYCoffeeTable #ModernFurnitureNEW CHANNEL▸ Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Project Mat - http://bit.ly/iiii-ProjectMat▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Cross Cut Sled - http://bit.ly/iiii-crosscut▸ The X-Carve----- X-Carve: inventables.com/technologies/x-carve?ref=FourEyes----- X-Carve Pro: inventables.com/technologies/x-carve-pro?ref=FourEyes----- Try Easel: inventables.com/technologies/easel?ref=FourEyesFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICMusic by Chris Jon Johnson. Check him out on bandcamp.com under the name "Sleepy Pablo".Link - sleepypablo.bandcamp.comABOUT THIS SPONSORAG1 by Athletic Greens is a comprehensive, all-in-one greens powder engineered to fill the nutritional gaps in your diet and support your body’s nutritional needs across four pillars of health: Gut health, Immune support, Energy and Recovery! It’s packed with 75 vitamins minerals, whole-food sourced ingredients and combines the perfect amount of micronutrients, absorption and taste to jumpstart your daily routine. AG1 is available in the US, Canada, UK and Europe.
I Turned Down $7,000 For This Foureyes Furniture 2023-06-01 | Thank you FOREO for sponsoring this video! Get 21% off on UFO™ 2 here - https://www.foreo.se/jvlgMy Mechanical Pencil - makertoolsource.comREFERENCED VIDEOS▸ Claro Walnut Dining Table - youtu.be/ghWhFRk16S8▸ Claro Walnut Hall Table - youtu.be/GWwUg5PL-9MABOUT THIS VIDEOBuilding a Round Dining Table out of a Live Edge Walnut Slab and Epoxy#epoxyresin #LiveEdgeTable #woodworking WOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneMATERIALS▸Slab from GL Veneer - bit.ly/GL-iiii Here is the "sister slab" - glveneer.com/Product/?path=14974▸Hardwood from Woodworkers Source - bit.ly/lumber-iiiiTOOLS▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Kreg Corner Routing Guide Set - bit.ly/Corner-Jig▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Table Saw Cross Cut Sled - bit.ly/iiii-crosscut▸ My Epoxy: Total Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxyCOMMISSION A PIECE OF CUSTOM FURNITURE▸ foureyesfurniture.com/for-saleFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture0:00 Intro0:46 Picking Out a Slab1:43 Big Pivot2:27 Picking a Layout4:50 Problem That Needs a Fix7:34 How I Cut Out Circles9:17 Why I'll Never Be Rich10:55 Satisfaction City14:51 the ONE bad thing about Walnut15:33 The Design (Best Part)17:32 Repetitive But AWESOME!19:31 MVP of This Project22:29 Why People DON'T LIKE the Domino24:05 Cost Breakdown26:37 My Finishing Process
1,455 Days in the Making Foureyes Furniture 2023-04-13 | Head to https://Fvrr.co/chrissalomone to check out the services available to you and use code FOUREYES10 for 10% off!Building a Custom, Live Edge Drawer Front, Cabinet#epoxyresin #LiveEdgeTable #woodworking WOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ How To Make Perfect Panels - youtu.be/3b-GmvUhwUU▸ How To Build Non-90º Cabinets - youtu.be/RKoOFApig-ATOOLS & MATERIALS▸ Slab from Street Tree Revival - streettreerevival.com▸ Hardwood from Woodworker's Source - bit.ly/lumber-iiii▸ Epoxy from Total Boat totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Miter Gauge - bit.ly/RocklerMiterGauge▸ Rockler Blum Drawer Slides & Jig - http://bit.ly/iiii-blum-jig▸ Digital Angle Gauge - http://bit.ly/iiii-DigitalAngleGauge▸ Rockler Deluxe Panel Clamps - bit.ly/PanelClamp_iiii▸ Rubio Finish at Rockler - bit.ly/RUBIOatROCKLERFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomoneCHAPTERS0:00 Introduction0:35 A New Wood Species1:42 The 1st Reason I Picked This Slab2:24 Board vs Slab - What's The Difference?3:10 The Other 2 Reasons I Picked This Slab4:08 About This Wood5:05 Epoxy Pour6:42 Figuring Out the Slab's Shape7:15 Woodworking Sucks10:00 The Design11:02 Trapezoid Cabinet/Box Technical Information11:30 What I Dislike Most About Making Furniture13:20 Why this Technique Works14:49 A Special Project17:48 A Big Mess Up18:48 How to Fix my Mess Up19:24 The Panels Between the Drawers20:37 More Footage Than Ever Before21:14 Trying Something New22:44 You Can't Do This With a Track Saw25:25 a Tip to Save Your Fingers26:50 The Absolute Worst Woodworking Thing28:11 What Clients ACTUALLY Value28:52 Just the Right Amount of Details30:27 Back to the Slab31:58 Attaching Drawer Faces32:35 Finishing33:26 Final Reveal
The Turning Point in My Woodworking Journey Foureyes Furniture 2023-03-07 | Thank you ROKA for sponsoring this video. Check them out here - roka.com/foureyesand save 20% with the code FOUREYES20This wood slab was supposed to become a large desk. But when the client backed out, we had to change directions...and turned it into something much better...and "bigger".#epoxyresin #LiveEdgeTable #woodworking Sign up to get notified when the course goes live▸ bit.ly/Foureyes-Freebie-CourseSILENT CHANNEL (Sound of Saws)▸ youtube.com/@SoundOfSawsSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneMY NEW CNC▸ avidcnc.comMechanical Pencil Project▸ foureyesfurniture.lpages.co/thepencilTOOLS & MATERIALS▸ Blacktail Studio's N3 Nano Kit (wood finish) - bit.ly/N3-iii▸ Slab from Street Tree Revival - streettreerevival.com▸ Hardwood from Woodworker's Source - bit.ly/lumber-iiii▸ Epoxy from Total Boat totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rubio Finish at Rockler - bit.ly/RUBIOatROCKLER▸ Rockler Miter Gauge - bit.ly/RocklerMiterGauge▸ Rockler Ceiling Track System - bit.ly/iiii-ceiling_track_systemFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS0:00 Intro0:44 A Big New Tool2:14 About This Wood4:30 An Epoxy Trick6:02 Stop Talking!7:24 A Woodworking Tip That Looks Dangerous 9:36 A Big Announcement...it's a Free Plan10:52 No Dominos Needed11:44 The Design12:20 Base pt. 1 - Legs15:46 Base pt. 2 - Aprons & Half-Laps17:06 Base pt. 3 - Stretchers & Shelf22:53 Attaching and Fixing the Top23:54 New Finishing Process26:38 Final Assembly & Beauty Shots
The Surprising Truth About Working with Scrap Wood Foureyes Furniture 2023-01-31 | Scrap Wood Slab Side Table / Coffee Table My Mechanical Pencil Project - foureyesfurniture.lpages.co/thepencilMy New Channel (Sound of Saws) - youtube.com/channel/UCsH9WLVpqmekJIrY8H5xEjw#epoxyresin #LiveEdgeTable #woodworking WOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ Shaun’s Video - youtu.be/jjFaiIU5Its▸ Scrap Wood Desk Video - youtu.be/T3cwKyFLP28▸ Double Slab Desk Video - youtu.be/RxRaX6osgRg▸ Scrap Wood Hall Table Video - youtu.be/GWwUg5PL-9MSILENT VIDEOS (On My New Channel "Sound of Saws)▸ Silent Slab Coffee Table Build Video - youtu.be/LpGerSXA65E▸ Silent Slab Desk Build Video - youtu.be/jFfJxNovdcc▸ Silent Round Dining Table Build Video - youtu.be/zSN1fne1XMs▸ Silent Dresser Build Video - youtu.be/trIENa8euJ8TOOLS & MATERIALS▸ N3 Nano Finish - bit.ly/N3-iii▸ Slabs from GL Veneer - bit.ly/GL-iiii▸ Hardwood from Woodworker's Source (the online place) - bit.ly/lumber-iiii▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rubio Finish at Rockler - bit.ly/RUBIOatROCKLER▸ Rockler Deluxe Panel Clamps - bit.ly/PanelClamp_iiii▸ Rockler Project Mat - bit.ly/PanelClamp_iiii▸ Epoxy from Total Boat totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxyMONSTER BIRDHOUSEmade by Blue Bird Woodshop. You can find him on all platforms under that name.FOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS0:00 Intro0:46 What Caused The Problem?1:46 I’m an Idiot - Here’s the Problem3:32 The Solution5:12 Another Problem & Another Solution6:08 Just When You Fixed Everything…8:10 I’m Not That Bad…I Swear9:17 Building The Base - A Simple MasterClass10:40 I’m Designing and Selling a Physical Product13:33 A Detailed Answer to Your Question15:52 Simplifying the Most Confusing Part of This Build17:35 My New Woodworking Channel18:45 Why Did We Do This? 19:36 Fixing & Attaching The Top22:32 Finishing Options24:39 Final Reveal
16ft Desk Foureyes Furniture 2022-12-29 | Building a Custom 16ft Walnut L-Shaped Desk. #epoxyresin #LiveEdgeTable #woodworking SHAUN'S VIDEOyoutu.be/SPQqYL54lqkWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ Slow Motion Woodworking Accidents Video - youtu.be/Xc-lIs8VNIc▸ Desk Video - youtu.be/T3cwKyFLP28▸ Dining Table Video - youtu.be/ghWhFRk16S8TOOLS & MATERIALS▸ Slabs from GL Veneer - bit.ly/GL-iiii▸ Hardwood from Woodworker's Source - bit.ly/lumber-iiii▸ Epoxy from Total Boat totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rubio Finish at Rockler - bit.ly/RUBIOatROCKLER▸ Rockler Deluxe Panel Clamps - bit.ly/PanelClamp_iiiiFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS0:00 Intro1:23 Slab Clean Up3:29 A Big Bug Hole4:36 Epoxy Pour6:44 A Big Problem9:02 Cutting Miters and Critical Dimensions11:24 Why I'm Building This Desk12:20 Shaun is Leaving the Channel13:50 Attachment Plates14:55 Stealing My Designs17:17 Strengthening a weak corner18:14 Best Pound-for-Pound Tool by Price / Fixing All the Little Holes19:46 Who is Wrong?20:55 Funny Story about an Injury22:32 Final Assembly & Final Reveal
$5,000 For THIS Piece of Scrap??? Foureyes Furniture 2022-11-21 | Check out the deals on EcoFlow's Black Friday campaign (November 11th-28th, 2022):us.ecoflow.com/products/delta-2-portable-power-station?aff=363Use code "9ALRG83D" to get 5% off the entire range of units!Get a free gift with every Black Friday order over $3000- get a solar generator for free when you spend $6000 or more (US only)- get a Delta mini for free when you spend $5000 or more (US+CA)- get a River mini for free when you spend $3000 or more (US only)Or Purchase on Amazon:Delta 2： amzn.to/3DAwoCiDual fuel generator：amzn.to/3zI0fYh"ABOUT THIS VIDEOI'm using a scrap piece from a walnut slab and turning it into the best piece of furniture I possibly can, to earn as much money as I possibly can, to donate to charity.#epoxyresin #LiveEdgeTable #woodworking WHERE I GOT THE SLAB▸ GL Veneer - bit.ly/GL-iiiiWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ Desk Video - youtu.be/T3cwKyFLP28▸ Dining Table Video - youtu.be/ghWhFRk16S8TOOLS & MATERIALS▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Bits - bit.ly/bits-iiii▸ Rubio Finish at Rockler - bit.ly/RUBIOatROCKLER▸ Rockler Miter Gauge - bit.ly/RocklerMiterGaugeMY EPOXYTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxyWHERE I GOT MY LUMBER ▸ Woodworker's Source - bit.ly/lumber-iiiiFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS0:00 Intro2:00 Slab Clean Up3:30 Building Form & Pouring Epoxy5:18 De-molding and Flattening the Slab6:55 Dealing with Bowed / Bent Wood8:50 Shaping the Slab10:30 The Base Design + Making Templates12:38 Making Leg Subassemblies17:41 Attaching Base and Top18:40 Making the Lower Shelf21:10 Fixing Problems with the Top22:15 Results of the Sale + Profit 24:23 Final Thoughts and Beauty Shots #EcoFlow #DualFuelGenerator #SmartGenerator #PortablePowerStations #GasGenerator
Turning Worthless Wood into a Stunning Table Foureyes Furniture 2022-11-03 | Save up to 40% on your SimpliSafe system. Visit https://SimpliSafe.com/foureyes to customize yours! Try SimpliSafe risk-free. If you don’t love it, return it for a full refund within 60 days. ABOUT THIS VIDEOThere were a lot of firsts with this project. First ever Carob Wood slab, first time using Iron Bark Eucalyptus. Even some of the woodworking techniques I used were firsts for me. Plus, I do something that might make woodworkers unhappy with me in how I ultimately treat this wood. But don't judge until you see the finished result!#epoxyresin #LiveEdgeTable #woodworking WHERE I GOT THE SLAB & WOOD▸ Street Tree Revival - streettreerevival.com/wood-slabs-online-inventoryAUCTION FOR THE HALL TABLE▸ foureyesfurniture.com/auctionWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ Walnut Slab Dining Table - youtu.be/ghWhFRk16S8▸ Tips Playlist - youtube.com/watch?v=xqlN7mR6LkY&list=PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3AiTOOLS & MATERIALS▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Miter Gauge - bit.ly/RocklerMiterGauge▸ Rubio at Rockler - bit.ly/RUBIOatROCKLER▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Kreg Universal Bench - bit.ly/Kreg-Universal-Bench▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ All Those Red ToolsWoodpeckers Tools - http://bit.ly/wpfoureyesMUSICEnding Song by Ryo SonodaFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS0:00 Intro0:44 Layout & Rough Cutting1:31 Slab Cleanup / Auction Results2:53 Preparing for the Epoxy Pour4:40 Epoxy Pour6:32 My First Epoxy Leak8:52 Slab Flattening / Metric vs Imperial10:55 Testing Stains on the Slab12:15 Best Tip For Better Sanding15:05 Designing and Building the Base17:45 An Interesting Fact About This Wood22:45 How to attach the base to the top25:14 Sanding and Finishing27:02 Final Reveal
Might Get Some Backlash For This Foureyes Furniture 2022-09-29 | Thanks to EcoFlow for sponsoring this video! Visit EcoFlow’s site at bit.ly/3T93uPK to check out the Delta 2.EcoFlow Amazon: amzn.to/3KA8ppWPlease use the H5HN59L2 coupon code for 5% discount on your DELTA II(2) until October 16th on both platforms. ABOUT THIS VIDEOIn this video we're building a live edge, epoxy, resin, walnut slab dining table. This was my first time working with a walnut slab, and now I see what all the fuss is about. We got a pretty rough slab, which was split in half due to a giant crack...but that was fine with us. We wanted to take something broken and give it a new life. We're really happy with the outcome, and I hope you'll love it too :) #epoxyresin #LiveEdgeTable #woodworking WHERE WE GOT OUR SLAB▸ GL Veneer - bit.ly/GL-iiiiBUY THIS TABLE▸ foureyesfurniture.com/for-saleWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ Slab Desk Video - youtu.be/T3cwKyFLP28▸ How to Make Perfect Panels - youtu.be/3b-GmvUhwUUTOOLS & MATERIALS▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Bits - bit.ly/bits-iiii▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ All Those Red ToolsWoodpeckers Tools - http://bit.ly/wpfoureyesBLACKTAIL STUDIO'S EPOXY WORKSHOP COURSE▸bit.ly/blacktail_foureyesMUSICEnding Song by Ryo SonodaFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureTHANK YOU ECOFLOW FOR SPONSORING THIS VIDEO:EcoFlow Website : bit.ly/3DZ1yoHEcoFlow Amazon: amzn.to/3KA8ppWPlease use the H5HN59L2 coupon code for 5% discount on your DELTA II(2) until October 16th on both platforms. 0:00 Intro1:15 Layout & Rough Cutting3:30 Problems with Slab Flattening4:23 Why We Started Working with Slabs6:38 Pouring the Epoxy8:55 Taking the Table Top Out of the Form10:34 Super Obvious Woodworking Tip12:15 Shaping the Table Top14:40 Brass Inlay Detail18:19 Fixing Edge Cracks & Base Design19:11 Making the Base24:35 Final Top Details + Perks of Being a YouTuber27:04 Attaching the Base to the Top28:38 Sanding & Finishing30:30 Final Reveal
BEST...DESK...EVER Foureyes Furniture 2022-08-28 | Visit amzn.to/3yolLBF and use code CHRISSAVE20 to get 20% off your Leather Honey Complete Leather Care Kit through September 30, 2022! This video is sponsored by Leather Honey, Amazon’s #1 best-selling leather care products.ABOUT THIS VIDEOIn this video we're building a live edge, epoxy, resin, slab desk. We've done a few live edge slab projects now, and so far we've been very restrained in our designs, making sure that we don't do anything to overshadow the slab itself. The wood slab top has always been the star of the show. In this project, we threw all of that out the window. The slab top is still an important part of the desk...but I think the base is the real star of the show here. I'm not sure if this was the right decision. But we wanted to give it a shot. So after you see the finished results, let us know what you think :)#epoxyresin #LiveEdgeTable #woodworking BUY THIS DESK▸ foureyesfurniture.com/for-saleWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansBLACKTAIL STUDIO'S EPOXY WORKSHOP COURSE▸bit.ly/blacktail_foureyesSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ How To Build Panels - youtu.be/3b-GmvUhwUU▸ How To Build Boxes - youtu.be/VMIGLI3D1HQ▸ How To Build Boxes With Complex Angles - youtu.be/RKoOFApig-A▸ Circle Slab Coffee Table - youtu.be/-qamVTDhAU8TOOLS & MATERIALS▸ Rockler Panel Clamps - bit.ly/PanelClamp_iiii▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ All Those Cool Red Tools (Woodpeckers) - http://bit.ly/wpfoureyes▸ Kreg Adaptive Cutting System - bit.ly/ACSfoureyes▸ Kreg 720 Pocket Hole System - bit.ly/Pocket-Hole-Pro▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ Where We Got Our SlabStreet Tree Revival - streettreerevival.comMUSICEnding Song Spotlight by Ryo Sonoda - youtube.com/watch?v=88J7yivIQRkFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture0:00 Intro0:29 Removing Wood Rot & Edge Clean Up2:45 Preparing for the Epoxy Pour3:48 Epoxy Pour6:00 Removing the Slab from the Mold6:48 Flattening the Slab on the CNC7:25 Epoxy Touch Up & Adding C-Channel8:34 Design Overview & Making the Legs10:38 Making Panels & Boxes, and Final Leg Shaping14:54 Cutting the Slab to Length and Attaching to Base16:22 Making Drawer Boxes18:01 Making Drawer Faces & Pulls20:48 Sanding & Finishing22:16 Final Assembly & Reveal
This Idea Sucked...So We Fixed It Foureyes Furniture 2022-07-24 | Building an Epoxy Resin Slab TableTry 5 pairs of glasses at home for free at warbyparker.com/foureyes Home Try-Ons are only offered in the US. No International shipping.ABOUT THIS VIDEOIn this video we're building a live edge, epoxy, resin, slab coffee table. Our first plan was to make a large dining table using two slabs, but when trying to find a layout, we didn't like anything enough. to commit to it. So when we decided to pivot, we realized we could make two large coffee tables out of our material...and even have enough leftover for another project. We're really happy we decided to make this 11th hour change, because instead of ending up with 1 project we didn't really like...now we have two projects that we do really like!#epoxyresin #LiveEdgeTable #woodworking BUY THIS TABLE▸ foureyesfurniture.com/for-saleWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansREFERENCED VIDEOS▸ Double Slab Dining Table - youtu.be/-DilufQTY-U▸ Circle Slab Coffee Table - youtu.be/-qamVTDhAU8▸ Woodworking Tips Videos - youtube.com/playlist?list=PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3AiTOOLS & MATERIALS▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Dust Right Quick Change Set - http://bit.ly/iiii-DustRight▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ All Those Cool Red ToolsWoodpeckers Tools - http://bit.ly/wpfoureyes▸ Where We Got Our SlabStreet Tree Revival - streettreerevival.comSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneFOLLOW▸ Subscribe | goo.gl/oVdN4f0:00 Intro0:33 Picking Slab Layout2:17 Why Epoxy Tables Now?3:22 How to NOT Waste Epoxy4:54 Epoxy Pour 1 & Designing The Base7:36 Epoxy Pour 2 & Over Engineering9:27 Big Problem with the Form10:55 A Big Last Minute Change12:26 Handling Wood Movement13:57 Order of Operations15:41 How To Keep The Top Flat16:53 Sanding and Finishing17:40 Final Assembly & Beauty Shots
They Said This Wood Was Unusable Foureyes Furniture 2022-07-03 | Building an Epoxy Resin Slab TableHead to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESABOUT THIS VIDEOIn this video we're building a live edge, epoxy, resin, slab coffee table. We've worked with slabs before, and we've worked with epoxy before...but never like this! We decided to make things extra difficult on ourselves by making the table's top circular, and more so by using a slab that most people would consider unfit for anything more than a fire pit. The top is made of Elm, and the base is made of Maple with Elm details. In the end we're very proud of how this piece came out...and we hope you'll enjoy it as well :)#epoxyresin #LiveEdgeTable #woodworking BUY THIS TABLE▸ foureyesfurniture.com/for-saleWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneREFERENCED VIDEOS▸ The Surly Eating Table (The other Circular Table) - youtu.be/uqs5xpqvub8▸ Double Slab Dining Table - youtu.be/-DilufQTY-U▸ Woodworking Tips Videos - youtube.com/playlist?list=PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3Ai▸ Edge Details Video - youtu.be/K5T_Vuzdm1ITOOLS & MATERIALS▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Project Mat (for keeping glue off your workbench) - http://bit.ly/iiii-ProjectMat▸ Rockler Circle Cutting Jig - bit.ly/CircleCuttingJig▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ All Those Cool Red ToolsWoodpeckers Tools - http://bit.ly/wpfoureyes▸ Where We Got Our SlabStreet Tree Revival - streettreerevival.comMUSICEnding Song by Ryo SonodaFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture0:00 Intro0:58 Picking Out Table Top Orientation2:45 Dealing With Bad Wood Sections5:00 Preparing For Epoxy Pour6:55 Epoxy Pour 17:38 Designing & Building The Base10:54 Hardware Explanation12:35 Epoxy Pour 213:41 Building the Base Part 218:05 Flattening The Slab19:52 Final Top Shaping and Edge Details21:56 Attaching the Top & Base23:45 Applying Finish25:10 Final Assembly & Reveal
I Guess Were Building River Tables Now Foureyes Furniture 2022-05-28 | Building a 10-1/2 foot, live-edge slab table.Head to fvrr.co/chrissalomone to check out the services available to you and use code FOUREYES for 10% off!ABOUT THIS VIDEOIn this episode we're building a double live-edge slab, 10-1/2 foot-long table! This was our first time ever building a table like this and it was a challenge. I've been woodworking for about 10 years, so I don't know what took me so long...but finally after seeing a lot of inspiring videos here on YouTube from other creators like Blacktail Studios...we had to give it a shot. Lots went wrong, but thankfully we were able to correct everything and end up with what, at least I think, is a pretty good looking table. We hope you'll enjoy watching us build it, as much as we enjoyed building it :) #RiverTable #LiveEdgeTable #woodworking BUY THIS TABLE▸ foureyesfurniture.com/for-saleWOODWORKING PLANS / PROJECT COURSES▸ foureyesfurniture.com/plansSUPPORT THE SHOW▸ Support on Patreon! - patreon.com/ChrisSalomoneLINKS▸ Where We Got Our SlabStreet Tree Revival - streettreerevival.com▸ The Epoxy We UsedTotal Boat - totalboat.com/product/thickset-fathom-deep-pour-clear-casting-epoxy▸ All Those Cool Red ToolsWoodpeckers Tools - http://bit.ly/wpfoureyesMUSICEnding Song by Ryo SonodaFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture0:00 Intro1:00 Picking Out Slabs2:45 Stabilizing Slabs with Epoxy6:38 Removing Bark7:34 Finding a Wide Belt Sander9:46 Designing and Building the Base14:38 Table Assembly Hardware18:20 Positioning Slabs on Base19:00 Ad Read19:40 Reacting To Photo Realistic Renders22:36 Cutting Table To Length & Base Details24:22 Attaching The Base to the Tops26:18 Sanding and Finishing29:06 Final Assembly & Reveal
An Unnecessary Tool...that EVERYBODY Wants! Foureyes Furniture 2022-05-12 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Our Woodworking Plans / Courses - foureyesfurniture.com/plans▸ How to Make Perfect Panels Video - youtu.be/3b-GmvUhwUUWe love our Festool Domino Mortisers. We use them all the time. We use them so much that we're often asked if it's possible to build our furniture without using a domino. We realize it is a very expensive tool to purchase, and definitely a luxury to own one. So in this video we're going over the various ways that we use dominos in our furniture and woodworking projects, and showing alternative ways that you can get the job done, and get an outcome just as good.WOODWORKING PLANS▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Doweling Jig - bit.ly/DowlingJigRockler21▸ Rockler Project Matt - http://bit.ly/iiii-ProjectMat▸ Kreg Pocket Hole Jig - bit.ly/Pocket-Hole-ProSUPPORT THE SHOW ON PATREONI am forever grateful for all of you who support the show on Patreon. You really do help make doing this possible. If you want to support the show, get a T-shirt and even discounts on plans, check out the patreon link and see if it's right for you - patreon.com/ChrisSalomoneCHAPTERS0:00 Introduction0:50 Domino Alternatives1:26 Mortise & Tenon Joinery7:57 Dealing with Wider Panels10:34 Miter Joints12:28 Splines15:03 Box Miter Joints (Bevels)17:48 Registration Holes19:30 Panel Making
7 Tips for Perfect Woodworking Panel Glue-Ups Foureyes Furniture 2022-04-28 | Check out the Tips for Better Boxes Video - youtu.be/VMIGLI3D1HQ▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESIn this video we cover several tips and techniques to help you get the flattest panels possible. These include selecting lumber, milling, clamping strategies, grain orientation, and more! The ability to make a flat panel is one of the most important things in woodworking. They are the foundation for literally almost every project. So the more of these techniques you can work into your process, the better off you'll be, and the nicer your projects will be.#woodworking #MakingPanels #FlatPanels▸ Checkout our Woodworking Courses/Plans - foureyesfurniture.com/plansFEATURED TOOLS ▸ Woodpeckers Clamping Squares - http://bit.ly/WoodPeckerClampingSquareREFERENCED VIDEOS▸ How To Build Better Boxes - youtu.be/uqs5xpqvub8▸ Round Dining Table - youtu.be/VMIGLI3D1HQFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture0:00 Introduction0:18 Picking Lumber2:25 Milling Lumber4:31 Grain Orientation6:31 In/Out" and/or "Up/Down7:26 Dowels, Dominos, and Biscuits9:49 Dowelminokits9:52 Dowmiscuitos11:38 Usage
How to Build the Perfect Nightstand - Woodworking Foureyes Furniture 2022-04-14 | ▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Try 5 pairs of glasses at home for free at http://warbyparker.com/foureyes. Home Try-Ons are only offered in the US. No International shipping▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Companion Piece (Bed) - youtu.be/0BdNUBIUpxo▸ Woodworking Tips - Perfect Miter Joints - youtu.be/_KEw83c8T98Checkout the Project Course for this Nightstand! The course includes 17 chapters of long format videos covering everything you'll need to build this piece, along with detailed dimensional drawings, templates and more! This is one of our favorite designs that we've ever made. We're really proud of how the two look together, and we hope that you'll love them 1/16th as much as we do :) #Woodworking #Nightstand #SideTableFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ShaunBoyd▸ Instagram | instagram.com/ShaunBoydMadeThis
Stop Ruining Your Work... + 3 Other Tips Every Woodworker Should Know Foureyes Furniture 2022-03-31 | More Woodworking Tips! - youtube.com/watch?v=xqlN7mR6LkY&list=PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3Ai▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESREFERENCED PROJECT VIDEOS▸ How to Build a Bed - youtu.be/0BdNUBIUpxo▸ More Tear Out Tips - youtu.be/_KEw83c8T98WOODWORKING PLANS / PROJECT COURSES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8In this video we cover 4 woodworking tips. The tips include setting perfect cut depths on a router, 5 tricks for avoiding tear out, 2 ways to fill gaps in your joints, and why should use a thicker marker line to mark out cut lines...sometimes.HOW TO SUBMIT A TIPSubmit your woodworking tip by emailing it to us at tips@foureyesfurniture.comHere’s what to include:1. In the subject line of your email, include a short description of tip (example: “How To Chop an Onion w/out crying” )2. In the body of your email, include a detailed description of your tip. If you have pictures or video, all the better. Anything that will help us to better understand your tip is appreciated. Don’t worry about high production on this stuff. We’ll take care of that.3. Where you’d like to be credited. Your Instagram Handle, your YouTube Channel, just your name…or even anonymous. Just let us know.
The Best How To Build a Bed Video on YouTube Foureyes Furniture 2022-03-24 | ▸ Woodworking Courses Available Here - foureyesfurniture.com/plans▸ Thanks to our Sponsor - To get $50 off any AHS plan, go to ahs.com/FOUREYES. Service fees, limitations & exclusions apply. See plan for details.NOTE: The AHS Sponsorship and our Woodworking Courses/Plans have nothing to do with one another. The Sponsor's Code is for $50 off of an AHS Plan...NOT our Woodworking Plans/Courses. Sorry for the confusion.▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomone▸ Companion Piece (Nightstand) - youtu.be/FJ3cRyP43MsCheckout the Project Course for this Bed! The course includes 14 chapters of long format videos covering everything you'll need to build this piece, along with detailed dimensional drawings, templates and more! I've been wanting to build this bed for a long time, so it's great to see it finally come to life, and I couldn't be happier with the outcome.#Woodworking #ModernBed #ModernFurnitureREFERENCED VIDEOS▸ Woodworking Tips Videos - youtube.com/playlist?list=PLg7QrqfzwiFrpIAYDnIpKoGneqc7JG3Ai▸ Slatted Coffee Table Build - youtu.be/0ak2jlvIS0A▸ Bench Build - youtu.be/0Y06BpNnb_cFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Rockler One-Hand Clamps - bit.ly/one-hand-clamps▸ Rockler Precision Miter Gauge - bit.ly/RocklerMiterGauge▸ Bed Hardware - bit.ly/Bed-hardware▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPPFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture
Perfect Miters and 3 Other Tips Every Woodworker Should Know Foureyes Furniture 2022-02-24 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESREFERENCED PROJECT VIDEOS▸ How To Build Better Boxes - youtu.be/VMIGLI3D1HQ▸ "Pico" Media Console Video - youtu.be/aU9XG38WEwg▸ "Glenn" Lounge Chair Video - youtu.be/hUxKDFle5pQ▸ "Longview" Dining Chair Video - youtu.be/ZE_eXqA9eCg WOODWORKING PLANS / PROJECT COURSES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8In this video we cover 4 woodworking tips which were submitted by viewers like you. The tips include cutting perfect miter joints, clamping weird angles, avoiding tear out on a table saw, and tips to improve your sanding.HOW TO SUBMIT A TIPSubmit your woodworking tip by emailing it to us at tips@foureyesfurniture.comHere’s what to include:1. In the subject line of your email, include a short description of tip (example: “How To Chop an Onion w/out crying” )2. In the body of your email, include a detailed description of your tip. If you have pictures or video, all the better. Anything that will help us to better understand your tip is appreciated. Don’t worry about high production on this stuff. We’ll take care of that.3. Where you’d like to be credited. Your Instagram Handle, your YouTube Channel, just your name…or even anonymous. Just let us know.
The Most Uncomfortable Bench Money Can Buy Foureyes Furniture 2022-02-17 | This video is sponsored by Warby Parker. Try 5 pairs of glasses at home for free at http://www.warbyparker.com/foureyes. Home Try-Ons are only offered in the US. No International shipping.▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethisREFERENCED VIDEOS▸ Rocking Chair Video - youtu.be/BVnpsERv3hM▸ How To Make Templates - youtu.be/4QYIkBKivMM▸ Tips & Tricks Every Woodworker Should Know - youtu.be/xqlN7mR6LkYIn this video I decided to build a unique slatted, triangular, interlocking, modern telephone bench. Building pieces like this is always fun since I have very few limitations when it comes to the design and build process. So I was able to push the boundaries of the furniture I usually make, and build something that I felt was unique but still would look good in different settings. So come along on a wonderful woodworking journey as I build this Modern Bench.NEW CHANNEL▸ Welcome to the Woodshop - https://www.youtube.com/playlist?list...FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes||Music||The Morning After - Bad SnacksProud - Text Me Records / Bobby RenzAutostrade - roljuiWarm Water - Underbelly
Tips and Tricks Every Woodworker Should Know - Vol. 2 Foureyes Furniture 2022-01-27 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ More Woodworking Tips - youtu.be/_KEw83c8T98PROJECT VIDEOS▸ Coffee Table - youtu.be/fyDpO3MWQD8▸ Lounge Chair - youtu.be/hUxKDFle5pQ▸ Desk - youtu.be/GQ_X-XVit_gIn this video we cover 4 woodworking tips which were submitted by viewers like you. The tips include a trick for getting perfectly flat panel glue-ups, how to rip a board with crooked edge safely on a table saw, how to find the centers of boards and evenly divide them into sections, and how to precisely measure an inside dimension.WOODWORKING PLANS▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP//HOW TO SUBMIT A TIP//Submit your woodworking tip by emailing it to us at tips@foureyesfurniture.comHere’s what to include:1. In the subject line of your email, include a short description of tip (example: “How To Chop an Onion w/out crying” )2. In the body of your email, include a detailed description of your tip. If you have pictures or video, all the better. Anything that will help us to better understand your tip is appreciated. Don’t worry about high production on this stuff. We’ll take care of that.3. Where you’d like to be credited. Your Instagram Handle, your YouTube Channel, just your name…or even anonymous. Just let us know.Thank you to those who submitted tips for this episodeFlat Panels - Chris and Shaun from Foureyes Woodworking on YouTube.Ripping Crooked Edges - Ivar HusaFind Centers - Brandon Mueller - youtube.com/channel/UCGrdyUYnaYZ3OXAb8dSRRnwInside Measurements - Bill Parrish
Tips and Tricks Every Woodworker Should Know Foureyes Furniture 2021-12-29 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ More Woodworking Tips - youtu.be/_KEw83c8T98WOODWORKING PLANS▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8In this video we cover 4 woodworking tips which were submitted by viewers like you. The tips include setting blade height for perfect half laps, getting cleaner rip cuts on the table saw when cutting long tapers, using tape to dial in better fitting dados and grooves, and cutting perfectly sized dados and grooves by using a drill bit. HOW TO SUBMIT A TIPSubmit your woodworking tip by emailing it to us at tips@foureyesfurniture.comHere’s what to include:1. In the subject line of your email, include a short description of tip (example: “How To Chop an Onion w/out crying” )2. In the body of your email, include a detailed description of your tip. If you have pictures or video, all the better. Anything that will help us to better understand your tip is appreciated. Don’t worry about high production on this stuff. We’ll take care of that.3. Where you’d like to be credited. Your Instagram Handle, your YouTube Channel, just your name…or even anonymous. Just let us know.Thank you to those who submitted tips for this episodeHalf Lap Perfection - Phillip Taylor instagram.com/phyrumtaylorClean Taper Rips - Jeff CarrionTape Dado Trick - Mike Po (leave a high five)Dado Drill Bit Trick - Chris Salomone and Shaun Boyd - goo.gl/oVdN4fCHAPTERS00:00 - Intro00:23 - Perfect Half Laps03:05 - Cleaner Cuts on Table Saw05:27 - Micro Adjusting Router Cuts09:12 - Perfect Width Dados
How To Build a Giant Corner Desk - Woodworking Foureyes Furniture 2021-12-19 | Save 40% or more on your SimpliSafe security system during their holiday sale! Visit http://simplisafe.com/foureyes to learn more!▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomoneCHECK OUT THE KREG ACADEMY - http://bit.ly/3nMAuPRREFERENCED VIDEOS▸ How To Make Templates - youtu.be/4QYIkBKivMM▸ Coffee Table that uses Hand Made Templates - youtu.be/FAwDwd1ZuMM▸ The Other Desk, (the one with plans) - youtu.be/GQ_X-XVit_g▸ Cutting Finished Parts on a CNC - youtu.be/1qdYYb2V0Bs▸ Our Favorite Edge Profile Details - youtu.be/K5T_Vuzdm1IThis desk was built for a client who wanted a really Big, Modern, L Shaped, Corner, Executive Desk...and I think we ticked all of the boxes. It is made out of walnut and measure about 100 inches along one length, and 112 inches along the other. So too big for most people's rooms. For that reason we didn't make plans for this desk, but we have plans for a different desk and plenty of other woodworking projects on our site. #Woodworking #DIYDesk #ModernFurnitureNEW CHANNEL▸ Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Rockler Project Mat - http://bit.ly/iiii-ProjectMat▸ Rockler Blum Drilling Guide - http://bit.ly/iiii-blum-jig▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Kreg Hinge Jig - bit.ly/KregHingeJigiiii▸ Kreg Pocket Hole Pro - bit.ly/Pocket-Hole-Pro▸ The X-Carve----- X-Carve: inventables.com/technologies/x-carve?ref=FourEyes----- X-Carve Pro: inventables.com/technologies/x-carve-pro?ref=FourEyes----- Try Easel: inventables.com/technologies/easel?ref=FourEyesFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICMusic by Chris Jon Johnson. Check him out on bandcamp.com under the name "Sleepy Pablo".Link - sleepypablo.bandcamp.com
Roasting Your Furniture Designs (Gently) Foureyes Furniture 2021-12-02 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Support the Show on Patreon - patreon.com/ChrisSalomoneToday I'm helping out Joe. He designed and built a Hall Table which he thought looked too chunky at the top. After hearing where he struggled, I came up with a few design tweaks which included, making the proportions a bit lower and longer, Adding visual lightness to the top by adding a chamfer, and adding visual weight to the bottom by adding a shelf. Finally I revealed my new design to Joe to hear his thoughts. #woodworking #furnitureDesign #SketchupWOODWORKING PLANSIf you want to build some pieces that you know will look good...and take the design guesswork out of it. Check out our Woodworking Plans:▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8FOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture
Building Cabinets for a Tiny Walk-In Closet Foureyes Furniture 2021-11-28 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethisOur New Channel - Welcome to the Woodshop - youtu.be/EY8nz5jDAwEInstalling Blum Drawer Slides - youtu.be/_nJWXax2T4IFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesToday I am attempting to turn a strangely small walk-in closet into a much bigger closet by adding some much needed storage. I built some cabinets out of oak veneered plywood that included two banks of drawers as well as plenty of hanging space. This build was a fun challenge to maximize the useful space in such a compact area. And I don’t build a lot of cabinets, so it was a fun change of pace to the usual furniture builds we have around here.MUSICSleepy Pablo - sleepypablo.bandcamp.com
A DIY Coffee Table, Anybody Can Build - (6 tools, forgot to mention Router) Foureyes Furniture 2021-11-21 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Kreg Academy - kregtool.com/academy?utm_source=foureyesacademyWOODWORKING PLANS▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8In this episode I'm building a very DIY Coffee Table / Bench. This woodworking project is relatively easy, and can be built using only a: Circular SawJig SawRouterDrillSanderand Brad nailerPlus clamps, glue, etc... Even thought it isn't too difficult, it still takes some time and patience. But I'll walk you through the whole process and even provide a PDF of the template used if you'd like to try your hand at it. ▸ Support the Show on Patreon - patreon.com/ChrisSalomone▸ Download the PDF Template - foureyesfurniture.com/free-plans▸ Get the Legs - semiexact.com/products/spider-metal-midcentury-table-legs#Woodworking #DIYCoffeeTable #ModernFurnitureFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture
A Floating Side Table, That Almost Looks Like its Really Floating Foureyes Furniture 2021-11-06 | Visit simplisafe.com/foureyes to get at least 40% off your security system with SimpliSafe's best deals of the year! ▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomoneIn this video I used epoxy to first fix table wobble. Then to make it look like the same table was floating or levitating. I had this idea when I was building a dining table a few weeks back. I needed to fix table wobble which is a pretty common woodworking problem. And I had the idea to fix it with epoxy, wondering if it would be more inconspicuous. That actually worked really well, so from there I took it to the extreme. #Woodworking #sidetable #tablewobbleFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPPFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureVIDEOS THAT SHOW THE MANUAL TEMPLATE ROUTING TECHNIQUE▸ youtu.be/4QYIkBKivMM▸ youtu.be/uqs5xpqvub8
Wild Office Furniture - Furniture Designer Reacts Foureyes Furniture 2021-11-04 | Head to fvrr.co/FourEyes to check out the services available to you.In this video I react to, and give my initial thoughts upon viewing a new collection of furniture and office items that are meant to spark creativity. The collection is called "Other Angles" and was designed as a collaboration between Fiverr and Bi-Rite Studio. The pieces and products aesthetic is based on Postmodern + vintage designs, primary colors, minimal silhouettes with a touch of humor
Making a Floor Lamp - Foureyes Furniture & Woodworking Foureyes Furniture 2021-10-28 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethis▸ Our New Channel - Welcome to the Woodshop - youtu.be/EY8nz5jDAwE|| FEATURED TOOLS ||▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesIn this video I am making a cool modern/retro/mid-century modern floor lamp. I have wanted to design and build a floor lamp to accompany my Glenn Lounge Chair for a few years, and I felt like this was the perfect time to do it. This lamp is made from White Oak and also features some cool Brass details, and it was a lot of fun to make. So come along with me as I dive into making this lamp while exploring some interesting woodworking techniques.||Music||The Morning After - Bad SnacksFresh Healthy Perspectives - BirocraticTake it Easy - Bad SnacksLulu - Underbelly
48 Round Table Foureyes Furniture 2021-10-14 | Visit simplisafe.com/foureyes to learn more and to get at least 30% off your SimpliSafe security system.▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomone▸ Our New Channel - Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1This table will have plans available! The plans include multiple chapters of long format videos covering everything you'll need to build this piece. The plans also come with detailed dimensional drawings, templates and more! And, from now until it releases, we're doing a pre-sale for $20 off. Once it releases the price will go to normal and stay there. The table itself is a 48" round dining table made of White Oak. I built this version at 28.5" high, but in the plans we'll cover how to make this standard height version as well as a taller "counter height" version. #Woodworking #DiningTable #ModernFurnitureFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Rockler Circle Cutting Jig - bit.ly/CircleCuttingJig▸ Rockler Precision Miter Gauge - bit.ly/RocklerMiterGauge▸ Rockler Silicone Project Mat XL http://bit.ly/iiii-ProjectMat▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Kreg Pocket Hole 720 - bit.ly/FoureyesKPPFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICPiano Music by Ryo Sonodahttp://sonodaryo.comyoutube.com/user/RyoSonoda1025
Decorative Sound Panels - Fixing the Sound Quality in our Office Foureyes Furniture 2021-10-04 | Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Our New Channel - Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethis||FEATURED TOOLS|| ▸ X-Carve: inventables.com/technologies/x-carve?ref=FourEyes▸ X-Carve Pro: inventables.com/technologies/x-carve-pro?ref=FourEyes▸ Try Easel: inventables.com/technologies/easel?ref=FourEyesWhen we updated our office and started using it a lot more for filming our videos, we realized one critical flaw…the sound and echo were terrible. So in an attempt to remedy the situation, we made some simple acoustic panels that also doubled as some display shelving. We wanted the panels to also look interesting on camera, so we made sure to give them a splash of design. So come along as we design, make, and install some new acoustic sound panels in our office.||MUSIC||A Caring Friend - Bad SnacksLulu - UnderbellyMemory Card Full - Birocratic
I Made a Race Car out of Wood! Foureyes Furniture 2021-09-30 | Building a Sim Racing Rig!More information for LG CineBeam HU70LA : bit.ly/39FFOhgWhere to buy LG CineBeam HU70LA : geni.us/9nv7uhFollow latest LG CineBeam news & giveaways! : geni.us/Jp1h82A#RocklerHobbyChallenge▸ Rules - rockler.com/hobby-challengeFOLLOW & SUPPORT▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Welcome to the Woodshop (2nd Channel) - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1I've always loved playing racing video games, but I've never had a steering wheel. In this video I went all out by building myself a custom sim racing rig complete with a Logitech G29 steering wheel and pedals. Instead of using a screen I used an LG CineBeam projector which allows me to adjust the screen size and is REALLY immersive! I know this is a pretty goofy project but I had a ton of fun building this one, and I'm going to have a ton of fun playing with it :)FEATURED TOOL▸ The X-Carve----- X-Carve: inventables.com/technologies/x-carve?ref=FourEyes----- X-Carve Pro: inventables.com/technologies/x-carve-pro?ref=FourEyes----- Try Easel: inventables.com/technologies/easel?ref=FourEyes▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Kreg 720 Pocket Hole Jig - bit.ly/FoureyesKPP▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes#SimRacing #SimulationRig
8 Tips for Perfect Sliding Doors without Hardware Foureyes Furniture 2021-09-14 | Try 5 pairs of glasses at home for free at http://warbyparker.com/foureyes. Disclaimer: Home Try-On Kits are only offered in the US.▸ Checkout our woodworking plans - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomone▸ Our New Channel - Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1In this video I go over, in-depth, step-by-step, how I go about making sliding doors for various woodworking projects. I go over a more simple method and a nicer, but more complex method. But I break it all down so that anybody can do it, and no hardware is needed. #Woodworking #slidingdoors REFERENCED VIDEOS▸ Pico Console - youtu.be/aU9XG38WEwg▸ Splintered Leg Console - youtu.be/y00OCbSAcAMFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Blum Drawer Drilling Jig - http://bit.ly/iiii-blum-jig▸ Rockler Cross Cut Sled - http://bit.ly/iiii-crosscut▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Precision Miter Gauge - bit.ly/RocklerMiterGauge▸ Blum Drawer Slides - bit.ly/BlumSlides▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPPFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureCHAPTERS00:00 - Introduction01:20 - Full Width vs Tongue Width Grooves02:33 - Cutting Grooves06:05 - Determining Groove Width06:30 - Advantages of Tongue Width Grooves07:55 - Ad Read09:20 - Tongue Width Groove Full Walkthrough14:18 - Recap of Technique14:52 - Woodworking Plans15:25 - Bonus Tips
5 Ways to Start Woodworking NOW! Foureyes Furniture 2021-09-10 | ▸Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethis▸ Our New Channel - Welcome to the Woodshop - youtu.be/EY8nz5jDAwEToday I’m talking about how anyone can get started woodworking. The assumption is that we need a certain set of tools to start designing and woodworking, but I don’t think that is necessarily true. So I am talking about how I think we can all get started with just the simplest of things like a pencil and paper. From there, I talk about the next steps we can take to get into woodworking without having to make a huge investment. Hope it helps someone get started!||Music||A Caring Friend - Bad SnacksLulu - Underbelly
Modern Coat Rack & More | How to Build Foureyes Furniture 2021-08-31 | ▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/shaunboydmadethis▸ Companion Piece (The Console) - youtu.be/aU9XG38WEwg▸ Our New Channel - Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1This Wall Organizer/Coat Rack has plans available! The plans include 14 chapters of long format videos covering everything you'll need to build this piece. The plans also come with detailed dimensional drawings, templates and more! You can use this piece as a wall organizer, coat rack, hat rack, or even just as an art piece. As you can probably imagine, this piece can be used to organize your most used things like coats, hats, and more! So go check out the plans to learn some fun woodworking…and more! FEATURED TOOLS Rockler Quick-Lever Clamps - bit.ly/QuickClamp-iiiiRockler Silicone Project Mat - http://bit.ly/iiii-ProjectMatRockler Cross Cut Sled - http://bit.ly/iiii-crosscutRockler Portable Drill Guide - bit.ly/Drill-Guide||Music||Lulu - UnderbellyCastille Soap - LATASHÁCocktails - Underbelly & Ty MayerMemory Card Full - BirocraticWarm Water - Underbelly
I Use This Piece of Furniture More Than Anything Else Ive Built Foureyes Furniture 2021-08-26 | Take 20% off your SimpliSafe security system AND your first month is free when you sign up for the Interactive Monitoring service. Visit http://simplisafe.com/foureyes to learn more!▸ Plans Available Here - foureyesfurniture.com/plans▸ Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomone▸ Companion Piece (Wall Organizer) youtu.be/4izDQeH6oJE▸ Our New Channel - Welcome to the Woodshop - youtube.com/playlist?list=UUmAc4goFlpEG_YXgZv2MiGw&playnext=1&index=1This console table has plans available! The plans include 25 chapters of long format videos covering everything you'll need to build this piece. The plans also come with detailed dimensional drawings, templates and more! You can use this piece as a media console, hall table, and more. Personally I've used mine for the past several years as an entryway piece. This is where we set our mail, keys, phones, and so on when we enter the house. It has served us really well and it's one of the most used pieces that I have ever built.#Woodworking #MediaConsole #ModernFurnitureFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Blum Drawer Drilling Jig - http://bit.ly/iiii-blum-jig▸ Rockler Cross Cut Sled - http://bit.ly/iiii-crosscut▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Precision Miter Gauge - bit.ly/RocklerMiterGauge▸ Blum Drawer Slides - bit.ly/BlumSlides▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPPFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICPiano Music by Ryo Sonodahttp://sonodaryo.comyoutube.com/user/RyoSonoda1025
2021 Shop Tour - Foureyes Furniture Foureyes Furniture 2021-08-19 | ▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESOur NEW 2nd Channel - youtube.com/watch?v=OG1TxGgsfIg&t=0sWoodpeckers - http://bit.ly/wpfoureyesWorkbench Link - youtu.be/VGFLJxhNbA4Tools:Sawstop Professional Table SawG0656XW - 8" Jointer with Spiral CutterheadG0453Z - 15" 3 HP 240V Planer with Spiral CutterheadG0512 - Edge Sander with Wrap-Around TableG0513X2 - 17" Bandsaw 2HP w/Cast Iron TrunnionJet 16-32 Drum Sander White Westinghouse - ebay.com/itm/292539414355In this video we are taking you on a magical journey around our woodshop. We show you how we organize our space, and how we have everything set-up for both furniture making, and video creating. Come along as we explore it all!
New Office, New Channel Foureyes Furniture 2021-07-29 | ▸ To start comparing quotes and simplify insurance-buying, check out Policygenius: policygenius.com/foureyes. Thanks to Policygenius for sponsoring this video!▸ New Channel - youtube.com/watch?v=OG1TxGgsfIgIn this video I finish off the desk that Chris started in the last episode, and we get our new office put back together and ready for all the new things we have planned for the future. We also finally get those shiny, new pencil sharpeners that we spent so much time researching. Easel: inventables.com/technologies/easel?ref=shaunboydX-Carve: inventables.com/technologies/x-carve?ref=shaunboyd▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesSupport on Patreon! - patreon.com/shaunboydmadethisFurniture 4 Sale - shaunboydmadethis.com/furniture-shop||Music||Easy Sunday - Bad SnacksCocktails - Underbelly & Ty MayerMemory Card Full - Birocratic
Making Changes for the Better...and were Gonna Need a Bigger Desk (so were building one here) Foureyes Furniture 2021-07-27 | ▸ New Channel - youtube.com/watch?v=229m3zfZpQ8Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES.In this video I talk about my history making woodworking videos here on YouTube, and some of our new plans for the future. As part of those plans for the future we also started renovating our office, so in this video we build a giant Desk for four people. FEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg Adaptive Cutting System - bit.ly/FoureyesKPP▸ Kreg 720 Pocket Hole - bit.ly/FoureyesKPP▸ Angle Gauge - http://bit.ly/iiii-DigitalAngleGauge▸ Bandy Clamps - http://bit.ly/iiii-bandy-clamps▸ Precision Miter Gauge - bit.ly/RocklerMiterGauge▸ Support the Show on Patreon - patreon.com/ChrisSalomone▸ Subscribe | goo.gl/oVdN4f▸ Instagram | instagram.com/foureyesfurniture
Making and Testing a New Woodworking Joint Foureyes Furniture 2021-07-15 | In this video we make and test a new kind of woodworking joint. And thank you to Squarespace. Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES.This video is a little different in that I didn't build a finished piece of furniture, but rather tested out a new joint to see if it would be a viable option for eventually building a piece of furniture. In the video we document coming up with the idea, testing out the best way to produce and clean up the finished joints, and then finally we strength test it to see if, and for what types of furniture it could work.▸ Support the Show on Patreon - patreon.com/ChrisSalomone▸ Subscribe | goo.gl/oVdN4f▸ Instagram | instagram.com/foureyesfurniture
DIY Bedroom Makeover and Expansion Foureyes Furniture 2021-06-30 | ▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESBenjiro’s Dresser Plans - foureyesfurniture.com/shop-plans/benjiro-dresserMaking A Wooden Solar System - youtu.be/avljX7Cq3T0Support on Patreon! - patreon.com/shaunboydmadethisFurniture 4 Sale - shaunboydmadethis.com/furniture-shopIn this video I transformed a bedroom in our house into a nursery by tearing out the closet and using it as open space. We were able to use some simple techniques to turn a boring bedroom into a beautiful and peaceful room for our new baby. I hope you dig it, as much as I hope Benjiro digs it when he is old enough to dig things. So come along as we transform this room and explore all sorts of fun techniques like, wall painting, baseboard coping, floor leveling, closet removing, wallpaper hanging, and plenty of other rocking good times.||Music||Puppy Love - Bad SnacksLulu - UnderbellyEasy Sunday - Bad Snacks
I Paid a Stranger $10 to Design My Living Room Foureyes Furniture 2021-06-24 | I paid 5 strangers to redesign my living room! Head to fvrr.co/foureyes and use code "foureyes" to check out what Fiverr can do for you and get 10% off!In this video I hired 5 people I found using Fiverr to redisign my living room. It's a very awkwardly shaped space which gave me a lot of trouble in finding an optimal layout, so naturally I wanted to see how some people who were more skilled than me would approach the same challenge. Living Room Renovation Video: youtu.be/Thekqk_BDSk
I Made the Solar System out of Wood Foureyes Furniture 2021-06-19 | ▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYESSupport on Patreon! - patreon.com/shaunboydmadethisFurniture 4 Sale - shaunboydmadethis.com/furniture-shopIn this video I am making a solar system mobile for my not-yet-born son’s room. I have been making a lot of stuff for him lately, and this was a fun one! And when I say fun, I mean wildly frustrating to the point of almost giving up, only to persevere and prove to myself and my kid that I don’t give up! Anyway, come along as I build the solar system and explore all sorts of amazing woodworking techniques like wood turning, sphere making, mobile assembling, planet sanding, and a lot of rocking good times.||Music||A Caring Friend - Bad SnacksCastille Soap - LATASHÁPuppy Love - Bad Snacks
Sofa / Side / Hall Table - Woodworking Foureyes Furniture 2021-06-11 | Visit simplisafe.com/foureyes to check out SimpliSafe’s award-winning home security that keeps your home safe around the clock! It’s really reliable, easy to use, and there are no contracts.▸ Support on Patreon! - patreon.com/ChrisSalomone▸ Woodworking Plans Available Here - foureyesfurniture.com/plansIn this video I'm building a custom sofa table / side table / hall table/ bookshelf piece. So it's a bunch of woodworking projects all rolled into one. Kinda. I guess this piece is pretty specific to my furniture needs, but I'm sure there are other people in similar situations, so hopefully this video can give those people some ideas that they can adapt to their needs/situation.#Woodworking #ModernFurnitureFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Rockler Cross Cut Sled - http://bit.ly/iiii-crosscut▸ Angle Gauge - http://bit.ly/iiii-DigitalAngleGauge▸ Rockler Doweling Jig - http://bit.ly/DowlingJigRockler21REFERENCED VIDEOS ▸ Living Room Remodel Video - youtu.be/Thekqk_BDSk▸ Awkward Nook Built-ins - youtu.be/Ud5RpExIbIoFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture
How to Build a Modern Dresser Foureyes Furniture 2021-05-28 | ▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Benjiro’s Dresser Plans - foureyesfurniture.com/shop-plans/benjiro-dresser▸ Domino VIdeo Link - youtu.be/ZXq-hrCfwAA▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesIn this video I am making a dresser for my not-yet-born son’s room. And it only made sense to name it after him, so this one is called Benjiro’s Dresser. We also made a full set of build plans for this piece if you want to make one of your own! I hope you dig it, as much as I hope Benjiro digs it when he is old enough to dig things. So come along as we build this and explore all sorts of amazing woodworking techniques like panel making, cabinet building, miter joint making, transition sanding, bevel cutting, domino connecting, and a lot of rocking good times.▸ Support on Patreon! - patreon.com/shaunboydmadethis▸ Furniture 4 Sale - shaunboydmadethis.com/furniture-shop||Music||Lulu - UnderbellyA Caring Friend - Bad SnacksPuppy Love - Bad SnacksEasy Sunday - Bad SnacksWarm Water - UnderbellyUrban Lullaby - Jimmy Fontanez/Doug Maxwell
DIY Dining Table - Full Plans - Free!!! Foureyes Furniture 2021-05-20 | DIY Dining Table, Full Video Plan Build! And thank you to my sponsor Warby Parker - Try 5 pairs of glasses at home for free at http://warbyparker.com/foureyes Home Try-Ons are only offered in the US.▸ Support the Show on Patreon - patreon.com/ChrisSalomone//ABOUT THIS VIDEO//In this video we are taking a deep dive into building this DIY dining table. All you'll need is a sheet of plywood, some table legs, a circular saw, drill, and sander. This is a fairly simple DIY woodworking project, but I'm going to cover it thoroughly so that you have the best chance at a good result. We'll also cover a few options such as edge details, overall size and more. The style of this video is a little different than our normal video. It's structured more like a very simplistic version of the video plans that we make and sell. Below is a link to a free, downloadable PDF with more instruction and dimensional drawings to supplement this video.//LINKS//▸ Download the Free PDF Plans here - foureyesfurniture.com/free-plans▸ Table Legs - http://bit.ly/Semi-Exact-SpiderLegs// TOOLS //▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg ACS - bit.ly/ACSfoureyes▸ Rockler Crosscut Sled - http://bit.ly/iiii-crosscut▸ Rockler Miter Gauge - bit.ly/RocklerMiterGauge▸ Kreg Crosscut Station - bit.ly/KregCrossCutStation▸ Bora Straight Edge - http://bit.ly/Rockler-StraightEdge▸ Kreg Straight Edge XL - http://bit.ly/Kreg-StraightEdgeXL▸ Kreg Pocket Hole 720 - bit.ly/Pocket-Hole-Pro▸ Kreg Modular Workbench - http://bit.ly/Kreg-WorkBenches// FOLLOW //▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurniture
Fusion 360 for Woodworkers | Model a Complete Project in 30 Minutes Foureyes Furniture 2021-05-14 | Learn how to model a complete project in Fusion 360. The first 1000 people to click the link will get a free trial of Skillshare's Premium Membership: https://skl.sh/chrissalomone02211▸ Woodworking Plans Available Here - foureyesfurniture.com/plansThis video is meant to be a beginner’s guide to designing and modeling a woodworking project using Fusion 360. We'll cover everything you need to know, from creating a new project and making basic shapes, to using components and modeling details and joinery. Join me on this journey into Fusion 360, won’t you? CHAPTERS00:00 - Introduction01:58 - Creating and Organizing Projects03:11 - Understanding the Workspace06:53 - Techniques to Create Bodies14:11 - Using Components16:32 - Modeling Details and Joinery22:37 - Rendering Your 3D Model
How To Build non-90º Cabinets | Woodworking Foureyes Furniture 2021-05-06 | How to build boxes with non 90º angles.Head to squarespace.com/foureyes to save 10% off your first purchase of a website or domain using code FOUREYES▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomoneIn this video we'll show you how to build complex boxes, or cabinets for your woodworking projects. I use trapezoidal cabinets in a lot of my projects, and I get a ton of questions about it, so I wanted to make 1 video that goes over everything you'll need, how I simplify the process, and my entire workflow for building complex, non-90º cabinets or boxes...all in one place. This video has lots of woodworking and theory, but I think if you watch it once or twice you'll see that it's really not as hard as it might look at first :)#Woodworking #CoffeeTable #ModernFurnitureBuilding Better Boxes Video - youtu.be/VMIGLI3D1HQFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyesFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICPiano Music by Ryo Sonodahttp://sonodaryo.comyoutube.com/user/RyoSonoda1025
Designing and Building a Modern Coffee Table Inspired by Bad Larry - Woodworking Foureyes Furniture 2021-04-29 | Visit http://simplisafe.com/foureyes to check out SimpliSafe’s award-winning home security that keeps your home safe around the clock! It’s really reliable, easy to use, and there are no contracts.▸ Woodworking Plans Available Here - foureyesfurniture.com/plans▸ Woodworking Plans Example Chapter - youtu.be/RPB9yMqpMt8▸ Support on Patreon! - patreon.com/ChrisSalomoneThis coffee table has plans available! The plans include 17 chapters of long format videos covering wood selection, milling, gluing and clamping complex angles, making mitered or beveled boxes, half lap joinery, using referential measurements, and plenty of other woodworking techniques. They also include a 20+ page PDF with extra information and dimensional drawings available in both metric and imperial.#Woodworking #CoffeeTable #ModernFurnitureFEATURED TOOLS ▸ Woodpeckers Tools (all the red stuff) - http://bit.ly/wpfoureyes▸ Kreg Crosscut Station - http://bit.ly/KregCrossCutStation▸ Rockler Cross Cut Sled - http://bit.ly/iiii-crosscut▸ Rockler Portable Drill Guide - bit.ly/Drill-Guide▸ Rockler Precision Miter Gauge - bit.ly/RocklerMiterGaugeFOLLOW▸ Subscribe | goo.gl/oVdN4f▸ Patreon | patreon.com/ChrisSalomone▸ Instagram | instagram.com/foureyesfurnitureMUSICPiano Music by Ryo Sonodahttp://sonodaryo.comyoutube.com/user/RyoSonoda1025
