Uploaded October 2023 | Updated November 2026, 3 hours ago
When a key is left on the inside of a lock or if its a thumbturn then we often get what we call a spinner, in that the core/plug turns but doesnt connect with the cam. One way of overcoming this is using a pick or wire but a easier method is using a bump key.
When a key is left on the inside of a lock or if its a thumbturn then we often get what we call a spinner, in that the core/plug turns but doesnt connect with the cam. One way of overcoming this is using a pick or wire but a easier method is using a bump key.










