Amazing Chinese Mill spindle run-out Machining with Joe 2024-10-13 | Check out the run out on this Warco WM18B milling machine.
The BEST Benchtop Milling Machine - Initial thoughts Warco WM18B Machining with Joe 2024-10-10 | #machining #unboxing #millingmachines #review #warco Join me in this Video where I setup my new recently unboxed bench top milling machine. My mill of choice is a Warco WM18B and I am very excited to see how the new features perform. If you are new to machining or thinking about buying your first machine this video will be perfect for you as I cover setting the machine up and specifics pros and cons I found from delivery to installation. As always if you find my content useful please subscribe to the channel it is completely free to do so and helps the channel grow. youtube.com/c/MachiningwithJoeLink to this machine below warco.co.uk/milling-machines/303698-wm-18b-mill.html
The Simple Project that BROKE my Mill Machining with Joe 2024-09-25 | Join me in my first video back in a long time. In this video I planned on machining a carriage lock for my Lathe but as you will go on to see it didn't go quite to plan. If you enjoy this video please subscribe to my channel youtube.com/c/MachiningwithJoe
Modifying my Lathes Quick Change Tool Post Machining with Joe 2023-11-18 | Join me in this video as I modify my existing quick change tool post and machine in a second dovetail. When I first machined this tool post I over looked how easy it would make lathe work when it comes to using a boring bar. So this additional dovetail will help with this problem. If you have enjoyed this video or found it useful then please subscribe to my channel it really helps the channel grow and expand to a wider audience . youtube.com/c/MachiningwithJoe
Workshop Tour 2023 Machining with Joe 2023-10-06 | Join me In this Video as I give an updated tour of my workshop for 2023. In this tour I cover all the new equipment I have gained over the last year along with an insight into how to shop functions and the flow between machines. If you have found this video interesting then it maybe worth watching the following videos to see the development of the shop over the yearsWorkshop tour 2022youtu.be/WdY2LFAiQsA?si=H_LMgHcvIFeCuO7MWorkshop tour 2021youtu.be/-ptG6ByMV8U?si=euo-ZRVM7ys5LIcHEssential mini lathe upgradesyoutu.be/gMy_ez-8-Yw?si=OwK87VvbctZT7OMBSubscribe now to machining with Joeyoutube.com/c/MachiningwithJoe
Machining a Multi Vice end stop Machining with Joe 2023-09-02 | #machining #millingmachine #3dprinting #cad #engineering Join me in this Video as I take my Cad designed part to reality. After 3D printing the part and seeing it would work I decided to machine the part from steel and once and for all have a dedicated End stop for the milling machine Vice. If you enjoy this video and would like to see more videos like this then please consider subscribing the link is below. youtube.com/c/MachiningwithJoe
How to Improve an Import Machinist Vice For £10 #vevor Machining with Joe 2023-08-18 | #vevor #machining #unboxing #vice Join me in this Video as I Unbox and take me first look at the Vevor 6 inch Machinist Vice. With the Vice inspected I found a few areas in which I felt the Vice needed improving so that's exactly what I done. Stick around until the end to see how I made the operation of this Vice 100X better for only £10. If you after one of these vices then use the Promo Code VVPROMO to get 5% discount and use the link below to Purchase.https://s.vevor.com/bfQp8r
How I Design parts for 3D Printing DFAM!!! Machining with Joe 2023-07-28 | #dfam #3dprinting #machining #design #testing Join me in this video as I jump onto Fusion 360 and walk you through my design process for successfully 3D printing parts that can be used in the workshop.If you enjoy this video and find it has helped you please give it a thumbs up and subscribe to the channel youtube.com/c/MachiningwithJoe
Can you use 3D printed tool holders on a mini lathe??? Machining with Joe 2023-07-09 | #machining #minilathe #3dprinting #design #testing Join me in this interesting video as I test 3 different types of 3D printed tool holders on my Warco mini lathe and I think the results will shock you. If you've enjoyed this video please consider subscribing to my Channel it's completely free and really helps the channel grow. youtube.com/c/MachiningwithJoe
Testing out my 100 year old machine for the first time!!! Machining with Joe 2023-06-17 | #vfd #surfacegrinder #machining #restoration #settings Join me in this second instalment as I mount the VFD unit and program it along with finally testing the machine out for the first time. If you stick around to the end you might be amazed at the tolerances I manage to achieve. If you have enjoyed this video please consider subscribing it really helps the channel grow and reach more similar minded people. youtube.com/c/MachiningwithJoe
Can He Revive This 100 Year Old Machine? Machining with Joe 2023-05-27 | #machining #restoration #herbertjunior #surfacegrinder #history Join me in the Exciting video as I bring a nearly 100 year old machine back to life ready to be incorporated into my home workshop. This Herbert Junior has survived a world war so hopefully can survive me working on it. Throughout the Video I progressively get closer to being able to use this great peice of machining history. If you found this video useful or entertaining please consider subscribing to the channel it Is completely free. link to the channel below. youtube.com/c/MachiningwithJoe
Warco Milling Machine Stepper motor power feed upgrade Machining with Joe 2023-04-23 | #machining #millingmachines #upgrade #modification #cnc Join me in this video as I Upgrade my mill to accept a stepper motor which will be used to power feed the table movement. This has been an upgrade I've been wanting to get done for a while now, but with the introduction of the new mini mill fixture plate product I am selling this has now become an important upgrade .If you found this video useful, entertaining, educational or just a way to pass the time please consider subscribing to the channel. It's completely free to do so. youtube.com/c/MachiningwithJoeStepper motor wiring video youtu.be/21yk2wzId8A
3D Printing Made Easy - Uncover the Hobbyists Secret! Machining with Joe 2023-04-08 | #3dprinting #machining #engineering #howto #cad Join me in this video as I briefly show you how to get from a CAD 3D model to a physical 3D object. After we have covered the How I will then show you what I have been printing for my workshop and why a 3D printer is an essential tool in anyones workshop.if you enjoy this content please consider subscribing it's completely freeyoutube.com/c/MachiningwithJoe
Testing out the Hemingway Knurling Tool: The Final Result Will Blow You Away! Machining with Joe 2023-03-24 | #machining #knurling #engineering #millingmachines #lathe Join me in this video as we sum up this 4 part series and give birth to the Knurlanator. By the end of this video I will finish off the last of the machining and then assemble and test the tool. If your thinking of making one of these tools please feel free to watch the whole series and if it has helped you out please subscribe to the channel it is completely free.Subscribe here youtube.com/c/MachiningwithJoeWatch the full playlist here:
Making a shop built knurling tool Part 3 Machining with Joe 2023-03-12 | #machining #millingmachines #lathe #toolmaker #engineering Join me in the 3rd instalment of this tool building series as I start on the final components of the tool build. In this video I will machining parts on Bothe the lathe and the mill so if you enjoy machining you'll enjoy this.If you have enjoyed this video then please consider subscribing to the channel it's completely FREE to do.youtube.com/c/MachiningwithJoe
Making a Knurling tool for a Lathe Part 2 Machining with Joe 2023-02-24 | #machining #tools #toolmaker #millingmachines #lathe #knurling Join me in this video as I continue working on the Hemingway knurling tool build. By the end of this video I hope to get the two main pivot arms completed, so if you want to see how they turn out watch the video until the end. If this video has helped you with your build or you just found it interesting to watch then please consider subscribing to the channel. link below.youtube.com/c/MachiningwithJoe
Hemingway Knurling tool build Part 1 The Body Machining with Joe 2023-02-10 | #machining #hemingway #knurling #toolbuild #engineering In this Set of videos join me as I set out to machine a knurling tool from HEMINGWAY KITS. This tool will become a great asset in my tooling library so machining as close to the drawings is going to be a challenge. If you found this first vide in the series interesting or helpful then please Subscribe to the channel. youtube.com/c/MachiningwithJoe
MACHINING a Rotary Table alignment tool Machining with Joe 2023-01-27 | #machining #alignment #rotarytable #millingmachines Join me in this video as I use @Blondihacks design for a rotary table alignment tool to make machining radius super easy.This video was a must before I move onto the next project the "Hemingway Knurling tool" If you've enjoyed this video please subscribe youtube.com/c/MachiningwithJoe Link to Blondiehacks Videoyoutube.com/watch?v=4WjXyJTpaW8
Finishing off my DRO Install Machining with Joe 2022-12-21 | #metallathe #engineering #modification #upgrade #machinery #machining Join me in this video as I wrap up the lathe DRO install in time for Christmas. If you are considering adding a DRO to your Lathe then this video maybe perfect for you, helping you through the installation. If you do enjoy then please consider subscribing to my channel it's completely free.youtube.com/c/MachiningwithJoeKit used in video ebay.co.uk/itm/283031039911?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ZdYpafXqSkK&sssrc=2349624&ssuid=iPMViaIkRfm&var=&widget_ver=artemis&media=COPY
5 ways to keep your Workshop Warm this Winter Machining with Joe 2022-12-11 | #insulation #keepwarm #workshop #heating Join me in this slightly off topic Video as I help insulate my Workshop to make Machining this winter more enjoyable.All the products I installed to improve the insulation can be bought at your local Hardware store for under £100.00 If you found this video useful please consider subscribing to my channel it's completely FREEyoutube.com/c/MachiningwithJoe
Installing an import DRO to a lathe Machining with Joe 2022-11-25 | #howto #howtoinstall #metallathe #lathes #upgrade Join me in this video as I start installation of a DRO on my Harrison M300. For me as a hobbyist having a DRO fitted to my machines is a must, Not just for convenience but also accuracy. So by the end of this video I hope to get the Z axis scale fitted and tested before coming back to complete the install in a later video.If you have found this video useful then please Subscribe to my channel Its completely free and really does help the channel growyoutube.com/c/MachiningwithJoe
Testing Glanze Lathe Tools From Chronos Machining with Joe 2022-11-13 | #minilathe #toolreviews #metallathe #hobbyists #Glanze Join me in this Really exciting Video where I team up with one of the UKs best suppliers for Machinist's tooling. The Company I have teamed up with is Chronos Tools chronos.ltd.ukSo in this video I will test a variety of tools Sent to me from the owner Mark. From Large tools for my Harrison M300 lathe to small Lathe tools for the Warco Wm180 mini lathe, watch as I put these tools to the test and give you my honest opinion on them. If you enjoy this style of video then please subscribe to the channel youtube.com/c/MachiningwithJoe 10mm Glanze tool setchronos.ltd.uk/product/set-of-10mm-glanze-mini-indexable-turning-tools-xc523/8” Glanze starter set chronos.ltd.uk/product/turning-parting-threading-boring-knurling-set-1-2-size20mm Glanze tool setchronos.ltd.uk/product/set-of-20-mm-ccmt-glanze-mini-indexable-turning-toolsChronos tools website chronos.ltd.uk
Another Machinists Hammer Machining with Joe 2022-10-29 | #damascussteel #metallathe #hammer #machinist #metal Join me in this Video as I Machine the Worlds most Overkill Machinist hammer. Working with new materials like bronze and copper I machine a Hammer based around the stunning Damascus Steel Hammer Head.If you've enjoyed this Video then please Subscribe to the channel it's completely free and really helps the channel grow. youtube.com/c/MachiningwithJoe
Making A Twisted Damascus Chuck KEY Machining with Joe 2022-10-01 | #damascus #damascussteel #machining Join me in the first of potentially a series of videos where I make everyday workshop items and tools from Damascus steel .In this video I machine a chuck key for my Harrison m300 from two billets of Damascus Steel.Not being a Blacksmith I am limited to my Damascus stock from what I can find online so if you know any good suppliers or want to support the channel then please reach out to me.And as always if you aren't Subscribed to the channel then please feel free to it's completely free and keeps you up to date. youtube.com/c/MachiningwithJoe
Workshop tour 2022 Machining with Joe 2022-09-17 | #workshoptour #homeworkshop #workshop Join me in this Video Where I show my Friend Terry Owner of the Youtube Channel Making Shiz around my awesome home Workshop. If you're into Machining, Engineering, Creating, Or just fancy a nose then this video will be perfect for you. Quick change tool post build seriesyoutube.com/playlist?list=PLtViO-fcUPEPWGYlXLGDyO5Ykcg3tE1vJIf your new to the channel then please subscribe it really does help the channel grow. youtube.com/c/MachiningwithJoeAlso please check out Terry's Channel he is a really nice guy so will be cool to help him reach that first milestone of 100 Subscribers. youtube.com/channel/UCBFlzLDKW1qZkZGi1tkg9mw
Setting up Machines after a Shop Move Machining with Joe 2022-09-02 | #machine #metallathe #machinesetup #millingmachine Have you just moved Workshops ? Setup your Machines Yet? Then join me as a get settled into my new Workshop and dial in my machines for some oil new projects coming very soon. If this is the first time you've watched one of my videos then please consider Subscribing. And if your a returning viewer then it goes without saying you should Subscribe, It's Completely FREE.youtube.com/c/MachiningwithJoe
Building my DREAM Workshop Part 3 Machining with Joe 2022-08-19 | Join me as I turn my newly built shed into a Workshop. Note this is not a professionals opinion, However 3 wires how hard can it be 😊.so in this video I achieve getting the workshop consumer unit wired, the socket circuit and light circuit giving this workshop the negative energy it needs. If you've enjoyed this video or any of my videos then please subscribe youtube.com/c/MachiningwithJoe
Building My DREAM Workshop Part 2 Machining with Joe 2022-08-06 | Join me in Part 2 as I wrap up most of the Construction work Ready to start on the Utilities inside the Workshop.So it has always been a dream of mine to have a fully functional Workshop at the End of my Garden. And just as luck has it, with the opportunity of moving house I now have the space to Build my very own Workshop. If you enjoyed this Video or any of my other Videos then Please Subscribe to the Channel if you haven't already. youtube.com/c/MachiningwithJoeInsulation used. diy.com/departments/diall-insulation-roll-l-6m-w-0-37m-t-100mm/3663602481812_BQ.prd?ds_rl=1272379&gclid=EAIaIQobChMI_pXQwcmy-QIVGdnVCh2D1gQ5EAQYAiABEgJnqfD_BwE&gclsrc=aw.ds&storeId=1163
Building my Dream Workshop Part 1 Machining with Joe 2022-07-22 | Join me as I begin building my dream workshop at just the end of my new Back Garden. Over the last few years here on Youtube I would go across the road to my garage, hook up the power and start Machining. But I have always wanted the ability to just walk out into my back garden flick a light switch on and start turning down some metal. Well in this series that dream becomes reality. If you enjoyed this video then please Subscribe to the channel ready for my Machining uploads coming back very soon. youtube.com/c/MachiningwithJoe
Turning a Helix on a MINI Lathe Machining with Joe 2022-06-11 | After seeing a few of these on social media I thought I'd give it a try. Join me in this video as I turn a helix from some round brass stock.With all going on in and around the channel a small little project like this is perfect for a quick video. Thank you to everyone again for supporting the channel and if your new please Subscribe it completely FREE. youtube.com/c/MachiningwithJoe
Stuart S50 Steam engine Flywheel and Crankpin Machining with Joe 2022-05-28 | In this video I will carry on with the Stuart model engine and get the crank pin and flywheel all done. This is my first time doing a project like this so if your a beginner and thinking of doing one, these videos maybe helpful for you. If you do get some value from this video then please Subscribe to my channel it's completely free and helps you keep up to date and what's going on. youtube.com/c/MachiningwithJoe
Stuart S50 Steam Engine Beginning a Journey starting at the BASE Machining with Joe 2022-05-14 | Join me in what is likely to be the largest but physically smallest projects on the Channel. So when it comes to Steam engines I can't say I'm a steam engine fanatic, but I can appreciate these were the start of things that led to where we are today.Why then would I want to start a project steam engine build? Well I think all the different components that go into making one of these will be a great way to test out all the equipment in the workshop and show the different setups/ skills needed to machine one of these fine engines.If you enjoy this video or any of my other videos please Subscribe to the Channel it is Completely Free and we all like freebies.youtube.com/c/MachiningwithJoe If you are feeling overly generous and want to help me out on funding projects and tooling for the channel then please Subscribe to be a Patreon of the channel as this helps out even more.patreon.com/machiningwithjoeQCTP build series-youtube.com/playlist?list=PLtViO-fcUPEPWGYlXLGDyO5Ykcg3tE1vJ
The Start of the Stuart S50 Engine Machining with Joe 2022-05-02 | In this video I will share with you the start of the Stuart S50 steam engine as well as the future plans for Machining With Joe.With all that is going on at the moment Thank You to everyone that has supported the channel. If your new here then please consider subscribing its completely free!!!youtube.com/c/MachiningwithJoe And for those feeling really generous please consider checking out my Patreon pagepatreon.com/machiningwithjoe
Making Gears for a MINI Lathe Machining with Joe 2022-04-23 | Purchase the dividing head from link below and use discount code VVPROMO https://s.vevor.com/bfQipbHave you ever wondered how gears are made? Ever wanted to try making your own gears? Then watch as I make a pair of 100 tooth Module 1 gears for a mini Lathe. As impractical as these ended up being cutting these was a great way to learn and one I would highly recommend. Lets just say once you've cut a 100 tooth gear by hand you'll appreciate what goes into gear cutting.If you've found this video useful or interesting then please Subscribe to the Channel its completely Free. youtube.com/c/MachiningwithJoeI also have a Patreon page to if your feeling really generous:)
Vevor BS-0 Dividing Head Review Machining with Joe 2022-04-09 | Purchase the dividing head from link below and use discount code VVPROMO https://s.vevor.com/bfQipbIf you're a hobbyist Machinist then after watching this video you need to go buy one of these Dividing heads. After buying a dividing head complete kit for under £200 I was sceptical of the quality but as I started un boxing this I was pleasantly surprised. So if you're thinking about buying one of these then check this review out and let me know what you think to it too. And if this video helped you out and your yet to Subscribe the please Check my channel out it's completely FREE!!! youtube.com/c/MachiningwithJoeIf your feeling really generous and what to support the channel further please consider becoming a Patreon. #patreon patreon.com/machiningwithjoe?fan_landing=true
Checking my Warco WM180 1 Year on Machining with Joe 2022-03-27 | So after owning this Warco WM180 Mini Lathe now for over a year I thought it was a good idea to check it all over and I was very surprised with the results. In this video I will show you how to check your X-axis accuracy Y-axis accuracy DRO accuracy Tailstock alignment And something I've been meaning to do for a while find out once and for all does the Warco Wm180 have tappered roller bearings as standard in its headstock.As always if you haven't already please Subscribe to keep up to date with the Latest in and around the Workshop. youtube.com/c/MachiningwithJoe
My FINISHED Quick Change Tool Post Machining with Joe 2022-03-18 | In this final video on my quick change tool post I will sum up the build with a much needed improvement. This build series has been a lot of fun with many new skills learnt along the way and at the end of it I have a much needed upgrade for the lathe. If you have enjoyed the video then please consider subscribing to my Channel, it's completely free and helps keep up to date. youtube.com/c/MachiningwithJoe And a MASSIVE thank you to Gav over at Steel City Gav your help has been great on this project. http://www.ebaystores.co.uk/steelcitygavFinally if this is the first video you have seen in this series then please check out the playlist.Quick change tool post buildyoutube.com/playlist?list=PLtViO-fcUPEPWGYlXLGDyO5Ykcg3tE1vJ
Batch Machining in a Home Shop Machining with Joe 2022-03-11 | In this spur of the moment video I've decided to share with you my process when batch producing small parts. So if you have a little batch job to do or just interested in machining then give this video a watch. And If you enjoy the video please consider Subscribing it is Completely FREE and helps you keep up to date with the Channel youtube.com/c/MachiningwithJoe
