This week I made a multifunction workbench out of 2x4s and plywood. This workbench packs a lot of functionality in a small size. It is perfect for a small garage woodshop. It works as a table saw outfeed table as well miter saw station. Check out the video to see how to build it! mosermakes.com/articles/multifunction-workbench
This week I made a multifunction workbench out of 2x4s and plywood. This workbench packs a lot of functionality in a small size. It is perfect for a small garage woodshop. It works as a table saw outfeed table as well miter saw station. Check out the video to see how to build it! mosermakes.com/articles/multifunction-workbench
#workbench #mitersawstation #outfeedtable #shopprojectsRAM Promaster camper van wall panel installation #vanbuilder #campervans #vanbuildMoser Makes2023-11-25 | ...Catch metal shavings as you drill! #vanbuilder #campervans #vanbuildMoser Makes2023-11-23 | Product link (affiliate link) for anyone interested: amzn.to/49N2c69How to fish a wire through van column #campervans #vanbuilder #vanlifeMoser Makes2023-11-17 | A fish tape is a super handy tool to have when it comes to running wire through difficult spots in a camper van build!
This is the one I'm using: amzn.to/47CsuWH (affiliate link)How to hang an undermount gray water tank. #vanlife #vanbuild #campervanconversion #vanconversionMoser Makes2023-11-07 | ...Secondary alternator gives so much charging potential for a camper vanMoser Makes2023-10-30 | 140A at idle? 280A while driving? That’s the current this secondary alternator can put out for charging the house battery bank. To do this the system uses a nations starter secondary alternator that is controlled by a Wakespeed WS500 regulator.Sprinter 144 Full Build [Extended Narrated Timelapse]Moser Makes2022-09-13 | Detailed walkthrough of the full van conversion process of this 144 Sprinter!
Video Sections: 00:00 Intro 00:14 Subfloor 05:30 Insulation 07:11 Framing 08:55 Wiring 09:58 Headliner shelf 10:23 Ceiling cladding 11:28 More wall framing 12:16 Wall cladding 13:57 Wall finishing 15:00 Floor 16:30 Electrical outlets 17:46 Bed platform 19:34 Rear door trim 21:32 Cabinets 21:58 Electrical system 22:51 Cabinet build 24:16 Trimwork 25:00 Plumbing 25:17 More cabinets and finishing touches 28:36 TourHow to Make a Rolling Clamp Rack + Free PlansMoser Makes2022-02-18 | Clamps are essential in the workshop. I made this rolling clamp rack to keep mine organized and close at hand. Free plans available for this project.
#DIY #WoodworkingMaking a Speed Square HolderMoser Makes2022-02-04 | I made this speed square holder based off the one Tom Silva made in an episode of Ask This Old House. It works great for keeping a 7" speed square close at hand. You can clip it onto your belt, apron, tool bag, or anything really!
(The above Amazon links are affiliate links and any purchase you make through them helps support my channel - thank you!!)
#diy #tools #woodworkingHow to Install Tongue and Groove Ceiling CladdingMoser Makes2021-12-05 | I installed a pine tongue and groove ceiling, and so can you! Here is how to do it, along with my tips and tricks.
Chapters: 00:00 Getting Started 01:28 Find/Mark Joists 02:26 Cut Boards 03:40 Install with Glue and Nails 08:31 Trick for the Last Row 10:43 Whitewash/Paint 11:58 Reveal
#homerenovation #tongueandgroove #diyHow to Build Board and Batten Accent Wall with ShelfMoser Makes2021-11-21 | I built this board and batten accent wall with a wall to wall floating shelf. Learn how to do it so you can build one too!
#diy #homerenovation #boardandbattenMaking Wooden Planter StandsMoser Makes2020-10-12 | Check out how to make these planter stands! The design is clean and simple, and they work great with concrete planters. Each planter consists of two pieces that fit together with a half lap joint and as a bonus, they can pack flat.
For the joinery between the legs and cross pieces, I creating loose tenons using the beadlock basic kit. This was my first time using this jig, and in the video, I share my experience with it.
#diy #woodworking #planterstands #flatpackHow to Make DIY Concrete Planters and Drip TraysMoser Makes2020-10-05 | 📺Subscribe for more videos - bit.ly/2Ta2wWO
Concrete projects are really DIY friendly and really fun! In this video I’ll teach you how to make cylindrical concrete planters using plastic buckets. These can be used indoors or outdoors and make great home decor with a modern look.
#diy #concrete #concreteplantersWhy You Need a Crosscut Sled and How To Make One Quickly and AccuratelyMoser Makes2020-09-26 | 📺Subscribe for more videos - bit.ly/2Ta2wWO
If you have a table saw, you need a crosscut sled! In this video, I'll explain what you need to know about making one and show you how to make a simple and accurate sled.
There are two keys to making an accurate crosscut sled. The first is a square fence and the second is runners that slide well without wiggling. You can cut the runners yourself, or by premade ones. Making them yourself is the cheapest and perhaps simplest option. Premade runners are more accurate and durable though. Here are some good options (affiliate links): Incra 18” Miter Slider: amzn.to/3kOheOB Rockler 18” Aluminum Miter Bar: amzn.to/3i2hlEv Rockler 24” Aluminum Miter Bar: amzn.to/3443YP6 Kreg 30” Jig and Fixture Bar: amzn.to/3mPkviy MICROJIG ZEROPLAY Miter Bar: amzn.to/340PHmj
#woodwork #crosscutsled #tablesaw #shopprojectsBuilding Tool Cubbies for Shop OrganizationMoser Makes2020-07-11 | 📺Subscribe for more videos - bit.ly/2Ta2wWO 📸Follow on Instagram - bit.ly/2Z9NEvy
I've been working on getting my tools reorganized and a small workshop setup! In this video, I cover building some shelves and tool cubbies along with giving a youtube channel update.
#shopprojects #workshoporganization5 Things I Would Change About My Van - Camper Van ConversionMoser Makes2020-07-03 | 📺Subscribe for more videos - bit.ly/2Ta2wWO 📹Watch the full van tour - bit.ly/2zMhgnP 📸Follow on Instagram - bit.ly/2Z9NEvy
Hello! In this video, I discuss things I would like to change about the design and build of my van conversion.
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Hello! This video covers the details and materials used for building out the interior of the camper van. I'll talk about the framing, structure and cabinets as well as panelling the walls.
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbFFrom Cargo Van to Tiny Home - Full Build TimelapseMoser Makes2020-05-18 | 📺Subscribe for more van videos - bit.ly/2Ta2wWO 📹Watch the full van tour - bit.ly/2zMhgnP 📸Follow on Instagram - bit.ly/2Z9NEvy
Here it is! My biggest project to date - converting this Ford Transit cargo van into a fully functional camper van conversion / tiny home on wheels. This footage was recorded over the course of about 7 months while building out the camper!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Camera gear used to film timelapse: GoPro Hero 7 Black: amzn.to/2X1GG97 Flexible Camera Clamp: amzn.to/2LynA5l GorillaPod: amzn.to/3bAphcRCamper Van Propane System - What You Need to Know for Your Build!Moser Makes2020-05-09 | In this video, I overview the propane system in my van and detail what you need to know to design and build your own. Enjoy!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------What Size BATTERY Do You Need for Your Camper Van?Moser Makes2020-04-06 | Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------LITHIUM or LEAD-ACID? What kind of battery to use in your camper vanMoser Makes2020-03-31 | Click the following to skip to different sections of the video: 1:14 - Lead-acid 8:32 - Lithium 10:45 - Case study
Links to products mentioned: Renogy Deep Cycle Agm Battery 12 Volt 200AH: amzn.to/33YI8ML
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------How to Design a Camper Van Electrical System/Charge Sources for Off-Grid CampingMoser Makes2020-03-23 | Click the following to skip to different sections of the video: 2:22 - Solar Panels 4:35 - Solar Charge Controllers 9:31 - Alternator Charging 13:32 - AC Charging/Shore Power
Links to products mentioned: Solar Charge Controller: Victron Energy SmartSolar 100|30 - amzn.to/2vMHaXc Battery to Battery Charger: Sterling BB1230 - amzn.to/2WEp3xA AC Charger: NOCO Genius GEN1 10A - amzn.to/2J6zbqL
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Deep Dive: Insulation Comparison for Camper Vans and MoreMoser Makes2020-03-12 | Click the timestamp to skip to different video sections: 00:00 - Intro 01:34 - Thinsulate 03:14 - Dynaliner 03:52 - Fiberglass 05:44 - Mineral Wool 07:07 - Denim 08:04 - Cellulose 09:09 - Natural Wool 10:36 - Rigid Foam Board 13:24 - Spray Foam 16:43 - Cork Underlayment 17:47 - Radiant Barriers 19:54 - Overall thoughts 22:46 - Condensation
Hello, this is the eighth video in my van build series! This one will be a little different than the previous videos. Instead of going through how I built my van, this one will be a general comparison of the different types of insulation you might consider using in a van or camper or similar build. Enjoy!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Camper Van Insulation: Installing Thinsulate + Intello PlusMoser Makes2020-03-12 | Hello, welcome to the seventh video in my van build series! This one is all about installing insulation in my van build.
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Roof Vent and Window Install on Ford Transit Camper VanMoser Makes2019-11-26 | Hello, welcome to the sixth video in my van build series! This one is all about installing the roof vent and window in my Ford Transit camper van. Enjoy!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Paints: For a generic paint for metal, I recommend Rustoleum Clean Metal Primer + Rustoleum Enamel Paint: Primer: amzn.to/2XMjjjZ Paint: amzn.to/2KVD8Qp But if you want a paint for a visible area that will match the vehicle's color, then I recommend buying primer, paint, and clear coat from Dupli-Color in the appropriate color for your vehicle: Primer: amzn.to/2rp6lN0 Paint: amzn.to/2OPP5sl Clear-Coat: amzn.to/35Awhnn
Disclaimer: The Amazon links are affiliate links and any purchase made through them helps to support my YouTube channel.
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Floor Composition & Construction for Camper Van BuildMoser Makes2019-11-09 | Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Welcome to the fifth video in my van build series. This one is an in-depth look at how I built the floor in my van. The video covers both the composition and construction of the floor. Enjoy!
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Layout Considerations for a Camper Van BuildMoser Makes2019-10-22 | Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Welcome to the fourth video in my van build series. This one is all about what to consider when planning the layout for a camper van build.
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Cleaning Up the Van - Ford Transit Camper ConversionMoser Makes2019-09-24 | Hi, welcome to the third video in my van build series. This one focuses on the cleanup my van required at the start of the build: removing old insulation, hunting down leaks, refinishing the floor, and more!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Links to products mentioned: Disclaimer: These are Amazon Affiliate links and any purchase made through them helps to support my YouTube channel. Dicor Lap Sealant (for roof plugs + other exterior surfaces): amzn.to/2ms0nbn Rust-Oleum Clean Metal Primer: amzn.to/2lb81Hc Rust-Oleum White Protective Enamel Paint: amzn.to/2mRPBLZ Wire Wheel/Brush Drill Attachment: amzn.to/2lnrTGS Simple Green All-Purpose Cleaner: amzn.to/2mr0iES Replacement clips for side moulding: amzn.to/2lnt49h Thinsulate Insulation: amzn.to/2kKrfmy
--------------------------------------------- mosermakes.com instagram.com/mosermakes ---------------------------------------------Transit vs ProMaster vs Sprinter vs RV? Choosing a van for my conversionMoser Makes2019-09-23 | Hi, welcome to the second video in my van build series. In this video, I'll discuss why I chose a cargo van instead of an RV to travel in, and then I will give a comparison of the different cargo vans out there. Enjoy! Subscribe for more!
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
Note about dimensions given in video: The measurements given in this might not be perfect. Before starting any build take your own measurements. I got these numbers mostly from searching around online and with some cross checking against notes I had from looking at vans and measurements of my own van. The website I found the most useful for a comparison of dimensions is the sportsmobile van-dimensions page: sportsmobile.com/van-dimensions/. It is also important to note that the lengths are not going from the front seats all the way to the back doors (as typically measured in OEM specs). I don’t consider every inch of that buildable space. The measurement goes from the point where a partition would be installed (generally cabinets can’t be built any further forward then this even in a design without a partition) to the rear column just before where the inset area for the doors is. This means there is typically about another 6-7” from this point to the middle of the doors, and while this space provides some more elbow room or room for things to stick out in the back, it isn’t very buildable space in my opinion as it is significantly narrower.
Hello! This is the full tour of my Ford Transit cargo van that I converted into a camper/tiny home on wheels! I'm stoked on the build and excited to share a look inside.
Looking for detailed videos about all aspects of the build? Find them here - bit.ly/3cGhhbF
I am building a truck bed camper for my Nissan Frontier! The bed of my truck is relatively small, so the camper isn't huge. The roof pops up to create a sleeping area that is about the size of a two-person tent. Watch the series to see the full build!
In this video, I answer the most common question about the camper: what does it weigh? I also go over a contraption I built to make it easier to load the camper into the truck.
I am building a truck bed camper for my Nissan Frontier! The bed of my truck is relatively small, so the camper isn't huge. The roof pops up to create a sleeping area that is about the size of a two-person tent. Watch the series to see the full build!
In this video, I focus on the interior of the camper. In particular, I cover the insulation, wall paneling, electrical system and more.
I am building a truck bed camper for my Nissan Frontier! The bed of my truck is relatively small, so the camper isn't huge. The roof pops up to create a sleeping area that is about the size of a two-person tent. Watch the series to see the full build!
In this video, I focus on the work I've done to finish and weatherproof the exterior of the camper.
I am building a truck bed camper for my Nissan Frontier! The bed of my truck is relatively small, so the camper isn't huge. The roof pops up to create a sleeping area that is about the size of a two-person tent. It will also feature drawers for storage and a camp kitchen.
In this video, I show how the exterior walls were skinned and finished with PMF (poor man's fiberglass). After the painting is finished, I can put the finishing touches on the exterior and start building out the interior! So, please subscribe to my channel to see the next video on the camper!
I am building a truck bed camper for my Nissan Frontier! The bed of my truck is relatively small, so the camper isn't huge. The roof pops up to create a sleeping area that is about the size of a two-person tent.
In this video, I show my current progress on the frame. After this, I will start to put the exterior plywood skins on. So, please subscribe to my channel to see the next video on the camper!
--------------Website-------------- mosermakes.com --------------Instagram-------------- instagram.com/mosermakes and instagram.com/mosermoseys for adventure photos ---------------------------------------------Super Simple Plywood ShelfMoser Makes2018-04-30 | In this video, I build a super simple shelf made from 1/2" plywood that connects to the wall using pocket holes.
Hope you enjoy the video! Let me know if you have any questions or comments. Subscribe for more content!
music used in the video: dizzy by Joakim Karud soundcloud.com/joakimkarud Music promoted by Audio Library youtu.be/xseXbA2N6D0Building a CabinetMoser Makes2018-04-29 | In this video, I build a cabinet for my living room. The cabinet is made primarily from 1/2" plywood, has sliding doors, and adjustable shelves inside.
Song: NOWË - Burning (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: youtu.be/AWv6Cr-RJaMDIY Wooden Christmas TreeMoser Makes2017-11-28 | A creative take on a DIY christmas tree. Watch to learn how to build one yourself! It can be made to any size and is a great opportunity to use up the scrap wood laying around the shop! #MoserMakes
Second Nature by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Artist: http://audionautix.comBuilding a Bat House from Cedar Fence PicketsMoser Makes2017-11-17 | Building a bat house from cedar fence pickets!
PLEASE NOTE: many people have pointed out in the comments that the location I chose to place the bat house is not ideal. Bats need more space underneath the house to drop out and gain speed as they take flight.
The total size of the bat house is about 18"x30" with two chambers for the bats to hang in. Bats are wonderful little creatures that can help eat unwanted insects in your yard!
Enjoy the video! Let me know if you have any feedback or questions.Building a Key RackMoser Makes2017-08-11 | Quick build video of a wooden key rack! The wood used here is poplar. Let me know if you have any questions or feedback about the build or the video.
Check out my instagram @mosermakes
Music: Acoustic/Folk Instrumental by Hyde - Free Instrumentals soundcloud.com/davidhydemusic Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library youtu.be/YKdXVnaHfo8Making a Leather Laptop SleeveMoser Makes2017-07-06 | This leather laptop sleeve is pretty simple and makes for a great project if you are just getting started with leather working. The size could also easily be adjusted to be used for a tablet, e-reader, or other similarly shaped item. I used felt for the lining to create a soft interior that wouldn't scratch the laptop. Let me know if you have any questions about how to make it or where to get the tools and materials.
♫Music By♫ ●Joakim Karud - Holiday Blues - youtu.be/4F7gcHJbQe0 ●Soundcloud - soundcloud.com/joakimkarudBuilding a Mini Workbench from Two 2x4sMoser Makes2017-05-22 | I built this mini workbench as part of the #two2x4challenge hosted by the Modern Maker Podcast. The challenge was to build anything you want, but for materials only use two 2x4s. The motivation behind making a mini workbench was because I wanted to start doing some leatherworking projects and needed a clean and stable surface to work on. Figuring out how to get all the pieces from two 2x4s was a fun design challenge.
Music: Hold On by Joakim Karud soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library youtu.be/Ks1rRmClD9YBuilding a Simple Wooden MalletMoser Makes2017-05-05 | Building a simple wooden mallet from a 1" dowel and a large chunk of scrap wood.
Music: I Dunno by Grapes http://ccmixter.org/files/grapes/16626 Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library youtu.be/sNAE8-mB5lQTips for Assembling Large Plywood PanelsMoser Makes2017-04-10 | Ever have trouble gluing and screwing together large pieces of plywood? Check out these two quick builds that make the process easier.
Music: Dreams by Joakim Karud soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music provided by Audio Library youtu.be/VF9_dCo6JT4