icannotgetafreename
A look at the BT Whole Home WiFi 088269 / 095663
updated
How to factory reset an EE Smart Hub 3 2023 as shipped October 2023.
Very confusingly named EE Smart Hub 3 as shipped October 2023.. but everything on its labels and the box refer to it as:
"SH2 SI 1.0" "SH20A" (and 112133) which might make you believe they refer to it as Smart Hub 2?
Also the product code "GRV9517UAC32 2-A-SA" is on the underside of the router.
Also shows the manual (pause to read the pages you want to read).
Bookmark links at the bottom of this video description to jump to each section.
Links to other videos about the router also in the description.
Very confusingly named EE Smart Hub 3 as shipped October 2023.. but everything on its labels and the box refer to it as:
"SH2 SI 1.0" "SH20A" (and 112133) which might make you believe they refer to it as Smart Hub 2?
Also the product code "GRV9517UAC32 2-A-SA" is on the underside of the router.
Power supply P/N: 131501801830J Model: S018CAM1200150 at 12 volts and 1.5 amps rating.
LINKS TO OTHER VIDEOS COMING SOON ONCE EDITED
00:00 Intro
01:12 Opening the packaging / box.
01:47 The manual.
03:20 "What's in the box" leaflet.
03:53 The power supply.
04:42 The other cables which come in the box.
05:26 The BT Smart Hub 3(?) router itself
05:52 The back of the router showing all the ports (Broadband, Phone, USB, Ethernet, WAN, Reset, Power and Power Switch).
06:35 The left side where the WPS button is.
06:44 The right side where the WiFi details card is.
07:50 The underside of the router showing the sticker.
09:45 Plugging the router in and the status lights.
10:31 Waiting for the router to boot up.
12:01 The end of the video and a warning about using the router as a WiFi point only when it isn't connected to the internet!
How to factory reset a Multy M1 WSM20 wireless mesh node/device.
00:00 Intro.
02:27 What comes in the box / contents of the box.
02:47 The manual (pause the video to read it).
03:26 What the status lights mean (Pause the video to read it).
03:53 The wall mount bracket.
04:05 The power supply.
04:46 The Multy itself.
05:11 The front of the Multy M1 WSM20
05:18 The back of the Multy M1 WSM20
05:40 The sticker on the underside of the Multy M1 WSM20
06:43 Plugging the Multi M1 WSM20 in for the first time, showing the boot up time.
06:58 CAT.
09:55 Downloading and installing the Multy administration app on a smartphone.
10:25 Opening the app, the first login page of the app.
10:40 Configuration and setup of the first Multy.
13:44 Setup and configuration of the first satellite Multy.
19:16 Setup is complete.
19:43 The first page once you have completed the initial setup.
19:51 Renaming a Multy.
20:46 Editing the settings including enabling IPv6.
22:30 Ethernet Connected Status page.
22:57 Backhaul status page.
23:17 Built in speed test function.
24:19 WiFi Wireless Settings (change the password or name of your WiFi network).
25:00 Connected device management including setting internet access times for homework or overnight blocking of the internet for children's devices.
29:44 Network Map screen.
30:04 Add a Multy screen (if you need to add another one after the initial setup).
30:21 Diagnose screen (Speed tests and WiFi Signal strength meter).
31:06 Local web admin password function to set the password for local access via a web browser without needing the app.
31:39 Port forwarding settings
33:02 UPnP settings.
33:33 NAT and Change to Bridge Mode settings.
34:12 Advanced settings via the app (only contains the SIP ALG option).
35:31 The web admin interface.
37:14 Adding a new Multy using the web admin interface only.
39:07 OpenVPN Server settings.
39:35 OpenVPN Client settings.
39:54 Internet settings (setting PPPoE or static IP details! Setting custom DNS servers, MAC address cloning etc.)
42:15 Many more ALG options via the web admin interface.
42:38 Dynamic DNS settings (no-ip, dyndns etc.)
43:26 Advanced wifi settings via the web admin pages.
44:31 Detailed LAN IP setup on the web admin pages (enable or disable DHCP server, change the DNS IP given to clients etc.).
45:45 Firewall options (enable WAN ICMP Ping).
47:13 Detailed WAN and router status page.
47:29 General settings (login timeout, change local admin password).
47:36 Remote web admin access settings.
47:46 Remote reboot, factory reset and firmware upgrade.
47:57 Change to bridge mode via web admin interface.
Which panel to remove and how. How to remove the hard disk and how to connect the new SSD.
Shows you where the reset button is, how long to hold the reset button down for and what the lights on the front of the router do.
This video shows you how to use a paperclip to press the reset button so the Deco M5 goes to factory defaults ready to be setup from the beginning.
tl;dw: Tap the reset button, no need to hold it down for a long time.
This video shows you how to use a paperclip to press the reset button so the Deco M5V3 goes to factory defaults ready to be setup from the beginning.
tl;dw: Tap the reset button, no need to hold it down for a long time.
Shows the device and the web admin settings pages.
00:00 Intro and underside of the router showing label and power switch.
00:20 The UK power supply (12 volts 1.5 amps).
01:13 Inside the device (the circuit board with the cans removed).
01:47 The back of the router showing the LAN, LAN and Power sockets and reset and WPS buttons.
02:11 Plugging the router into power and boot up.
03:26 The power light process and colours and plugging the router into the internet.
04:30 The log in page of the web settings admin interface.
04:58 The front page of the web admin interface once you have logged in. Showing Network Topology and Devices connected.
05:25 The "Network Details" page.
06:30 The "Status" section starting with "Device Info" page.
06:49 The "LAN Status" page.
07:26 The "WAN Status" page.
08:02 The "WAN Status IPv4" page.
08:09 The "Home Networking" page which shows connected devices and their DHCP details.
08:46 The "Statistics" page showing packets and bytes counters for interfaces.
09:24 Moving onto the "Network" section of the web admin interface and starting with the "LAN" page where you can configure IPv4 LAN IP and DHCP details.
10:21 Network WAN settings page.
10:58 "Wireless (2.4GHz)" settings page where you can set channel, bandwidth, SSID and password etc.
12:39 "Wireless (5GHz)" settings page where you can set channel, bandwidth, SSID and password etc.
12:57 "QoS Config" pages for Quality of Service packet tagging.
13:25 "MESH" settings page.
13:57 "Maintenance" section starting with changing the administration password.
14:17 "Device Management" where you can give friendly names to devices on your network.
14:39 "Reboot Device" allows you to remotely restart the router.
14:43 "Factory Default" allows you to remotely factory reset the router.
15:00 "Diagnostics" page where you can ping and traceroute directly from the router.
15:30 "Log" page for logging on the router, when set to debug mode it is fairly detailed and may help you solve issues.
17:14 "TroubleShooting" section including "US Speed Test" and "DS Speed Test" (not very accurate!), latency and DNS tests.
19:26 "Port Mirrors" setting to allow you to mirror network port traffic to another port.
20:15 "Application" page starting with "Port Forwarding" settings. Showing how to forward ports or services to your network.
21:09 "Port Triggering" settings.
21:18 "DDNS" (Dynamic DNS provider) settings.
21:48 "NNTP" time server settings.
22:06 "UPNP" (universal plug and play) settings.
22:37 "Security" settings starting with firewall and "Attack Protection" settings screen.
22:53 "MAC Filter" filtering settings.
23:10 "IP Filter" filtering settings.
23:25 "DMZ" and "ALG" settings (application layer gateway settings for things like SIP/VoIP).
tl;dw: Hold down the reset button until the light on the front starts flashing red.
tl;dw: Hold down for about 8 seconds, until the WiFi light on the front of the router goes off.
00:00 Intro
00:36 A look at the lights on the unit
01:15 Sockets and buttons on the back of the device and label containing default details.
02:10 The power supply (PSU).
02:42 Installing the stand / bracket.
04:03 The manual.
05:47 Plugging power in for the first time.
06:54 Plugging network in for the first time.
11:40 Benchmarks directly to the main router.
13:12 Benchmarks and speed tests to the mesh node with ethernet backhaul to the main router. (gigabit)
14:35 Changing the router to being WiFi backhauled rather than over ethernet.
16:60 Benchmarks and speed tests to the mesh node with wireless backhaul to the main router.
with very good signal (each device next to eachother). (443-660mbps download, 600-763mbps upload).
18:52 Benchmarks and speed tests to the mesh node with wireless backhaul where the nodes are several meters apart and through some walls. (440-508mbps download, 408-443mbps upload).
21:31 Test proving the mesh node improved speeds in the test.
22:21 Initial download of the Zyxel MPro app on an iPhone.
23:18 Opening the MPro app for the first time and connection or detection of your wireless mesh network.
24:01 How to use the app and what each screen shows and does.
Shows you all the screws to remove, the inside of the machine and where most of the components are and how to swap out the hard disk.
Shows you how to set the defaults in case you have lost or forgotten the IP address or password for the device.
Shows you which button to press and how long for to restore the device to factory defaults.
See my other videos about the CPE710 / CPE605..
How to factory reset the tp-link CPE710 on the device itself - youtu.be/Qv0GUr4NE_s
How to factory reset the tp-link CPE710 using the PoE injector - youtu.be/t6M6OoMLdCs
Initial assembly and power up of tp-link Pharos CPE710 - youtu.be/wCLZwIdJpxs
00:00 - Intro
00:15 - Setting a static IP on your computer so you can reach the CPE710 for configuration.
01:02 - Initial log in to the router and setting the country and a non-default password.
01:39 - Running through Quick Setup for Access Point device.
04:07 - Running through Quick Setup for the Client device.
04:51 - Testing connectivity over the point to point wireless bridge.
06:02 - Speed test across the wireless bridge (benchmarking).
08:31 - The status screen when in Client mode including Throughput, Stations, Interfaces, ARP Table, Routes and DHCP Clients.
09:02 - Network tab for setting IP Address, DHCP Mode, Gateway, DNS, MTU, IPv6, VLAN and "MAC & IP Binding".
09:52 - Wireless tab for setting Region, WiFi mode, channel width, TX rate, frequency, transmit power limits.
10:33 - Wireless tab for setting SSID, WDS mode, WPA / Security mode and password/passkey.
13:15 - Wireless tab when in Client Mode (see below for AP mode!) for Advanced Wireless Settings. Distance Setting, Beacon Interval, RTS Threshold, Fragmentation Threshold, DTIM Interval, AP Isolation, Short GI, Wi-Fi Multimedia WMM, QoS.
13:28 - Management tab for System Logs, Discovery settings, Ping Watchdog, Dynamic DNS, Web Server, SNMP Agent and SSH Server settings.
15:09 - System tab for Device name, location, language, admin user/pass and time + timezone settings.
15:52 - On device ping diagnostics.
16:07 - On device speed test (iperf), this function appears to have a hard limit likely due to device CPU limitations.
19:27 - Spectrum Analysis mode.
21:27 - Antenna Alignment.
22:34 - The status screen when in Access Point mode including Throughput, Stations, Interfaces, ARP Table, Routes and DHCP Clients.
24:38 - Wireless tab when in Access Pojnt mode (see above for client mode!) including Multi-SSID and MAC Filtering options.
See my other videos about the CPE710 / CPE605..
Initial assembly and power up of tp-link Pharos CPE710 - youtu.be/wCLZwIdJpxs
How to factory reset the tp-link CPE710 using the device itself - youtu.be/Qv0GUr4NE_s
The web interface of the tp-link CPE710 / CPE605 including initial point to point setup example and speed testing / bench-marking - youtu.be/mX73ZuBzPEU
See my other videos about the CPE710 / CPE605..
Initial assembly and power up of tp-link Pharos CPE710 - youtu.be/wCLZwIdJpxs
How to factory reset the tp-link CPE710 using the PoE injector - youtu.be/t6M6OoMLdCs
The web interface of the tp-link CPE710 / CPE605 including initial point to point setup example and speed testing / bench-marking - youtu.be/mX73ZuBzPEU
Shows the box, what's in the box, the manual and (mostly) how to assemble the device.
Due to severe difficulty putting in the middle bracket, that bit couldn't be filmed. If you are struggling; that is normal. It's a nightmare and I'm astonished they don't do that bit for you in the factory!
See my other videos about the CPE710 / CPE605..
How to factory reset the tp-link CPE710 on the device itself - youtu.be/Qv0GUr4NE_s
How to factory reset the tp-link CPE710 using the PoE injector - youtu.be/t6M6OoMLdCs
The web interface of the tp-link CPE710 / CPE605 including initial point to point setup example and speed testing / bench-marking - youtu.be/mX73ZuBzPEU
00:00 - Intro
00:31 - What is on the box (sales text, specs etc.).
01:46 - The CPE710 manual (pause the read the pages you want).
03:40 - Items in the box, unpacking the box.
05:56 - Assembly of some bits of the dish.
12:23 - Powering on the CPE710
13:37 - The next steps on how to setup a point to point pair are in the followup video youtu.be/mX73ZuBzPEU
Shows the laser, image sensor, mirror and electromagnet to cause the "scan" sweep.
"Update Required A problem has occurred with one of the printer's critical system files. A printer update will be installed to fix this problem."
Shows you how to download the update, format a USB stick and install the file onto the printer.
A video showing how to change or remove the rear wiper on a Nissan Leaf 2019.
Also known as a K7Q65EA#ABU
This video shows you which screws to undo, where the hidden screws are and how to open up, swap out or upgrade the hard disk with an SSD. Also shows you where other components are within the computer like the RAM, Keyboard connector, fan etc.
Shows what to press, how long to press for. What the lights do during the reset and how long it takes for the ATA to start responding again on the network.
Other than the lack of DSL RJ11 port it's nearly identical to the VMG8825-B50B seen here: youtu.be/wstXYP5HEH8
Web admin interface (the Opal firmware): youtu.be/kL5wkafXEZk
Factory Reset also likely to be the same ( youtu.be/U3MzTClzlMg )
Part No Part Number: PSKUQE-01100UEN
Also known as Dynabook Satellite L50D-B-146
-What kind of visual light loss levels are there through a splitter.
-Does a larger splitter result in lower light levels?
-How much light is reflected back on a UPC ended splitter vs APC splitter.
-What is inside the plastic casing of a 1 : 32 splitter.
00:49 - Visible light brightness without a splitter.
01:55 - Visible light brightness though a 1 : 32 UPC splitter.
03:29 - Visible light reflected back between outputs on the 1 : 32 UPC splitter.
06:31 - What is inside the case of the 1 : 32 UPC splitter.
10:33 - Visible light brightness though a 1 : 16 APC splitter.
11:59 - Visible light reflected back between outputs on the 1 : 16 APC splitter.
13:01 - Signal levels seen without a splitter.
13:21 - Testing the bend radius of a fibre whilst showing the signal levels received.
14:27 - Signal levels seen with the 1 : 16 APC splitter.
15:29 - Signal levels seen with the 1 : 32 UPC splitter.
16:22 - Reflected signal levels seen on the 1 : 32 UPC splitter.
17:48 - Reflected signal levels seen on the 1 : 16 APC splitter.
Ubiquiti UF-LOCO Loco ONT
-Power on
-Connect
-Firmware Update
-Reconnect.
Reboot via console or cold boot: 102 seconds to on and client obtained dhcp address.
00:01 - Powering on ONT.
01:07 - Plugging in ONT to fibre.
01:42 - Automatic firmware update (4 minutes to download and prep before reboot).
03:24 - Connecting a computer or router to the ONT.
03:40 - Forcing a PON loss of service.
Spoiler: It didn't work. Expensive and performs badly (when tested off camera a few days earlier). The setup process often fails or the device doesn't work on power on.
The video does show you where the sockets and buttons are on the device, maybe it is of value to someone.
How to factory reset the Trifi boost: youtu.be/C3Hdp7gRqT4
Shows the lights, manual, sockets, buttons and power supply of the router.
The EX3301-T0 is exactly the same but does not have the VDSL/DSL port.
Web admin interface of a very similar router: youtu.be/kL5wkafXEZk
Other video: A general look at the trifi boost youtu.be/ttTOwhWd98U
Also every page of the web admin configuration web page interface! See the bookmarks below for each area of the system.
Chapters:
00:00 Intro
02:01 What comes in the box.
02:37 What the power supply looks like and its ratings.
03:20 Quick scan through of the manual / quick start guide.
04:34 The front of the router.
04:45 The back of the router showing the WPS and Reset buttons, 4 LAN ports, 1 WAN port, USB port, power socket and on / off switch.
05:22 The labels on the bottom of the router.
06:53 Plugging the router in, boot up time and power consumption.
10:00 Logging in to the router admin web interface page with the default IP address.
10:30 The initial setup wizard.
13:00 Logging back in to the router after the initial setup.
13:05 Router Status Page showing Firmware Version, Current Time, IPv4 and IPv6 addresses and WAN status.
13:45 Local Network status showing LAN IP and DHCP information including client list.
14:05 Wireless Status Page showing very little helpful information (doesn't show the current channel or bandwidth!).
14:20 LAN and WAN port status screen.
15:06 Loocal Network configuration page for LAN IP, Subnet Mask and DHCP server settings and static reservations.
17:13 WAN setup for Dynamic, Static IP, PPPoE, PPTP, L2TP, Bridge Mode or Wireless Bridge. (MTU)
20:00 VLAN settings / setup for WAN and LAN 3 + LAN 4.
20:27 IPv6 Settings.
20:48 MAC Address Cloning / spoofing.
21:05 Advanced Routing / Static Routes, enable or disable NAT and RIP (Dynamic Routing).
22:09 Wi-Fi settings, Name, Channel, Channel Width etc.
23:23 WiFi WPS button settings and WPS PIN.
23:40 Wi-Fi password / WPA settings.
23:50 Guest Wireless settings.
24:33 Wireless MAC Address Filtering.
24:55 WiFi Advanced Settings (Beamforming and MU-MIMO).
25:07 Security, Firewall: Enable WAN Ping request and enable/disable firewall.
25:32 DMZ Settings.
26:17 DDNS / Dynamic DNS (dyndns and no-ip).
26:30 VPN Passthrough options (IPSec, PPTP, L2TP)
26:39 IPv6 Firewall settings.
26:43 QoS / Bandwidth limiting settings.
29:16 Single Port Forwarding settings.
29:38 Range Port Forwarding settings.
30:08 Port Range Triggering (whatever that is!).
30:39 External Storage (USB Storage or drive access via SMB or FTP).
31:39 Language settings.
31:55 Set / change the admin password.
31:59 Time Zone settings.
32:07 Management settings (external remote access to the web admin interface).
32:41 "Gateway Function" (settings for SIP ALG Application Layer Gateway and UPnP Universal Plug and Play).
33:35 Backup and restore settings.
33:51 Factory Reset or reboot the router via the admin interface.
33:59 Firmware Upgrade page.
34:06 Parental Controls
35:39 Troubleshooting Logs settings and access. (Security Log and DHCP Clients log).
36:10 Ping and Traceroute from the router.
How to factory reset the router: youtu.be/wblTNRkgq_U
How to install OpenWRT custom firmware onto the router: youtu.be/_JchPPHkFN8
Also shows what the lights do when you hold down the reset.
These instructions are for stock firmware. OpenWRT might be different!
How to install OpenWRT custom firmware onto the router: youtu.be/_JchPPHkFN8
A general look at the entire router and web admin interface: youtu.be/PPEiJjZz3N4
Shows you the downloads you need, how to put on the recovery flash and then main flash the firmware and re-enable the WiFi.
Make sure you SSH in after finishing the install and apply the changes listed here: openwrt.org/toh/linksys/e8450
The important ones are "Beam Forming", "Wireless Ethernet Dispatch" and "Hardware Flow Offloading". You may also want to enable "default CPU governor" to reduce heat and power consumption.
How to factory reset the router: youtu.be/wblTNRkgq_U
A general look at the entire router and web admin interface: youtu.be/PPEiJjZz3N4
00:21 - Back of the router showing LAN sockets, Phone sockets (ATA), USB, power and power button.
00:45 - Fibre Optic - Optical SC connector.
02:23 - WiFi details sticker.
02:40 - The power supply.
03:30 - Turning the router on and waiting for it to boot up.
06:21 - Logging into the router using the default IP address.
07:04 - Status pages.
09:04 - Quick Start section. How to change DNS Provider / Server.
09:44 - Wireless settings (Channel, name, password, channel width etc.)
11:10 - Backup and Restore settings.
11:32 - Factory reset via the web interface.
11:35 - Remotely reboot the router via the web interface.
12:12 - System log / Event log.
12:24 - Firewall log.
12:28 - Advanced; Scheduling and Blocking (Scheduled Access, Service Blocking, Website Blocking).
13:58 - IP Addressing DHCP Settings. (Change the IP address of your LAN).
14:12 - IPv6 Settings.
14:18 - DHCP Static Reservations.
16:13 - QoS (Quality of Service) packet tagging. (NOT rate limiting!).
16:58 - Admin password change (Administrator Credentials).
17:06 - Application Forwarding (Not sure how this differs from Port Forwarding (below)).
18:03 - Port forwarding.
19:12 - Firewall.
19:56 - DMZ.
20:49 - UPnP (Universal Plug and Play).
21:22 - ARP Spoofing (ARP Spoofing Protection)?
22:16 - Remote admin access.
22:37 - STP (Spanning Tree Protocol).
How does SpaceX Starlink stand up to full speed UK Internet Provider BT FTTC (Fibre to the Cabinet).
This video shows the full download experience comparing 80mbps down, 20mbps up FTTC against Starlink with full view of the sky at around 10pm on a Friday evening.
The tests include downloading a Debian live image, Factorio from Steam and lots of web browser based speed tests.
A short video on how to factory reset the Calix GigaCentre 844G-2 Wifi Hub Wireless Router for fibre GPON connections.


