Mikes Tech Tips
Setting up game streaming with Sunshine and Moonlight on Bazzite
updated
Another tip I forgot to mention: If you are comfortable using virtual machines, you can pass your external SSD drive to the virtual machine and complete the install in complete isolation. If you do this, you don't run the risk of accidentally selecting the wrong drive during the install. Also the installer will not write an EFI entry into your BIOS.
Timestamps
00:00 Introduction
00:25 What do you need for the project
01:03 Downloading Bazzite
01:33 Downloading Rufus and make our bootable Bazzite flash drive
02:42 Booting Bazzite installer
03:30 Installing Bazzite
05:07 Secure boot blue MOK screen
05:32 Testing Bazzite running on external SSD drive
06:25 Tips: Disable fast boot
06:40 Tips: Set USB devices to boot first
07:00 Tips: Bad shim signature
07:24 Tips: Swapping SSD drive with internal drive
07:54 Tips: Operating System freezes
08:18 Tips: booting EFI file directly
09:01 Conclusion
Note: If you have an AZERTY layout for your keyboard, when you get to the MOK screen, you'll need to enter universqlblue rather than universalblue. Same goes for any other keyboard layout where the letters are in a different position to the US layout.
Timestamps:
00:00 Introduction
00:10 Before we start
01:03 Video outline
01:51 Downloading Bazzite
03:32 Making boot media with Ventoy
05:31 Doing checksums
06:29 Disable Fast Startup
07:10 Shrink Windows C drive
07:49 Turning off Secure boot
08:30 Booting Bazzite installer with Ventoy
09:10 Bazzite installer: Manual partitioning
10:55 Bazzite installer: btrfs sub-volume setup
11:38 Bazzite installer: User creation
12:31 Enroll the Bazzite secure boot key
13:16 Re-enable Secure boot and testing
14:14 Amendment - Ways to boot back into Windows
16:15 Conclusion
Here is a link to the companion blog post in the guide: mikes-tech-tips.medium.com/running-a-plex-server-and-jellyfin-server-on-bazzite-using-quadlets-d4284478a0df
And a link to the Bazzite documentation on Quadlets for a deeper dive: docs.bazzite.gg/Installing_and_Managing_Software/Quadlet
Timestamps:
00:00 Introduction
00:36 What is a Quadlet?
00:58 Making a Plex Media Server Quadlet
03:10 Setting up Plex
03:37 Quadlet auto start explaination
03:55 Attempt to add a new volume to the container
04:42 How to uninstall our Plex Quadlet
05:23 Creating a Jellyfin Quadlet
06:36 Setting up Jellyfin
07:25 How to uninstall our Jellyfin Quadlet
07:53 Conclusion
Timestamps
00:00 Introduction
00:24 What is Scopebuddy?
00:50 Gamescope in desktop mode the old way
01:57 Generating and locating Scopebuddy configuration files
02:40 Editing Scopebuddy's configuration files
03:30 Scopebuddy in action
04:06 Scopebuddy documentation
04:39 Conclusion
Timestamps:
00:00 Introduction
00:45 Demo
01:44 Making a boot Bazzite shortcut in Windows
05:20 Creating a boot Windows steam shortcut in Bazzite
06:12 Conclusion
Timeline
00:00 Introduction
00:48 KDE Connect remote input demo
01:37 Installing KDE Connect on your phone and setup
02:24 Other KDE Connect features
03:16 Conclusion
from a dual-boot setup without having to reinstall Windows.
Timestamps
00:00 Introduction
00:16 Changing the BIOS boot order to boot Windows Boot Manager
00:49 Removing the Bazzite partitions and expanding your C drive
02:39 (optional) Remove the Bazzite EFI entry from the BIOS
03:34 Conclusion
Timestamps
00:00 Introduction
00:48 Shrinking C drive on Windows
01:28 Downloading Linux Mint
01:38 Downloading Rufus and loading Linux Mint on a bootable USB
03:09 Moving and resizing our Bazzite partitions in Gparted
04:34 Testing
04:52 Conclusion
Bazzite has changed quite a bit in the 10 months since I first used it. This is an updated version of my previous Bazzite dual boot guide.
Note: If you have an AZERTY layout for your keyboard, when you get to the MOK screen, you'll need to enter universqlblue rather than universalblue. Same goes for any other keyboard layout where the letters are in a different position to the US layout.
Edit: Once you have installed Bazzite, if you want Windows to appear in the grub boot menu. Open the terminal in Bazzite and run "ujust regenerate-grub", this will scan for bootable operating systems and allow you to select Windows on boot.
Timestamps:
00:00 Introduction
00:10 Before we start
01:03 Video outline
01:51 Downloading Bazzite
03:32 Making boot media with Ventoy
05:31 Doing checksums
06:29 Disable Fast Startup
07:10 Shrink Windows C drive
07:49 Turning off Secure boot
08:30 Booting Bazzite installer with Ventoy
09:10 Bazzite installer: Manual partitioning
10:55 Bazzite installer: btrfs sub-volume setup
11:38 Bazzite installer: User creation
12:31 Enroll the Bazzite secure boot key
13:16 Re-enable Secure boot and testing
14:13 Conclusion
sharing our Steam game library between Bazzite and Windows.
Update 1: Note that you can skip step 07:12 Setting Games partition to auto mount in Bazzite. The Bazzite team has added an auto mount rule for btrfs drives, so your drive will be in /run/media/your-user-name/games and you can add it to Steam as usual.
Timestamps
00:00 Introduction
00:48 Creating our shared btrfs partition in GParted
01:40 Installing WinBtrfs
02:32 WinBtrfs Secure Boot work around
03:16 WinBtrfs permission configuration
05:10 Hiding your Bazzite drive to prevent accidental edits
06:00 Set Steam to use new Games drive in Windows
07:12 Setting Games partition to auto mount in Bazzite
09:58 Set Steam to use new Games partition in Bazzite
10:35 Conclusion
NB!!! Both the original drive and the clone will have the same UUIDs. If you have both drives inserted at the same time, you might end up in emergency mode. So remember to disconnect the old drive after you have completed cloning it.
Timestamps
00:00 Introduction
00:44 Moving partitions with GParted
04:15 Booting up the cloned drive
04:50 Conclusion
Timestamps
00:00 Introduction
00:48 How to calculate a hash of a file in Windows
02:45 How to calculate a hash of a file in Linux
03:54 Conclusion
Note: This is the same video as before, but I have made the audio a little louder as the original was too quiet.
Timestamps:
00:00 Introduction
00:26 Fedora Kinoite
01:02 How to pin images in Atomic Desktops
01:47 Rebasing to Bazzite
03:10 Show option between booting Bazzite or Kinoite
03:55 Installing Bazzite Flatpaks
04:41 Conclusion
need to load the kernel first" error.
This error commonly occurs when you have a dual-boot setup with Windows and Bazzite. Bazzite is running a custom Linux kernel and Secure Boot only allows signed code to run during the boot process. When Windows does a BIOS update the Secure Boot key that you added specifically for Bazzite sometimes gets lost in the process. We'll be looking at re-enrolling the key without re-installing Bazzite.
Timestamps
00:00 Introduction
00:51 Temporarily disabling Secure Boot
01:31 Re-enroll the Bazzite Secure Boot key
02:20 Enrolling the key in the MOK Management screen
03:10 Turning on Secure Boot again
03:22 Testing Bazzite and Windows with Secure Boot enabled
04:10 Conclusion
Timestamps
00:00 Introduction
00:31 Reproducing the error
01:17 Configuring manual partitioning in Bazzite installation
03:47 Setting up BTRFS subvolumes in Bazzite installer
04:40 Conclusion
My hardware
* Motherboard: MSI MAG B365M MORTAR (MS7C67)
* CPU: Intel Core I5-9400F
* GPU: Nvidia GeForce GTX 1050 TI
* RAM: Crucial Ballistix 8GB DDR4 3200MHz x 4
* Disk: Rogueware 2.5" SATA NX100S 256GB
Software
* OS: bazzite-gnome-nvidia:stable-40.20241014
Thumbnails
00:00 Introduction to Bazzite couch gaming setup guide
00:49 Making Gnome look more familiar for Windows users
03:07 Making Steam auto start on boot in Big Picture Mode
04:17 Enabling GPU webview rendering in Steam BPM to remove graphical lag
04:35 Enable auto login
04:57 Install Decky Loader
05:29 Conclusion
Edit NB: Note that this is not a dual-boot guide, be very careful with your EFI and boot partitions as well as your /etc/fstab file if you decide to remove your Windows partition and have existing Linux distributions installed.
Timestamps:
00:00 Introduction to Bitlocker issue
00:42 Removing the Bitlocker partition with GParted
01:31 Installing Bazzite
In this video we are going to make a script to boot directly into Windows which we'll run in Gamemode in Bazzite.
timestamps:
00:00 Introduction
00:23 Demo solution
01:00 Creating a boot Windows script
02:30 Allow "sudo efibootmgr -n" to run without a password
04:00 Adding boot Windows script in Steam
04:30 Conclusion
timestamps
00:00 Introduction
00:31 Scenarios that cause Linux to go into emergency mode
00:54 The current issue
01:12 Summary of the solution
01:35 Getting into Grub
02:13 Editing Grub at boot to boot into bash terminal
02:55 Editing /etc/fstab from bash terminal
03:34 Rebooting the system and confirming that all is well
04:12 Conclusion
In this guide we are going to create a Debian Distrobox container with systemd support. Next we'll install Plex Media Server and get it up and running as the current user.
Note: that Plex Media Server does have an official Docker container and the Docker instructions can be adapted to work with Podman quite easily if you want to go the direct container route.
[Timestamps]
00:00 Introduction
00:24 Why use Distrobox?
00:50 Creating the distrobox
02:03 Installing Plex in our Debian Distrobox
02:55 Changing ownership of Plex working directory to current user
04:04 Changing the Plex service to run as current user
05:25 Plex working in Browser
05:50 Conclusion
In this video, I will show you how to get into the terminal of Bazzite (note that this also works for almost any other Linux system) by modifying the grub boot entry. We then look at how to unhide grub, how to boot into the desktop mode and lastly how to rollback to a previous version of Bazzite.
Update: Sometimes when you get the blank screen and you are running the deck image. Steam has just managed to break itself on one of it's updates. You can force steam to re-install using the terminal command `ujust fix-reset-steam`
Update2: This video was released a while ago. Rather go for a newer version such as early March `bazzite-rollback-helper rebase stable-41.20250301.1` and see if that solves your blank screen issue. If not I'd try an older rebase, maybe `bazzite-rollback-helper rebase stable-41.20250227.1`
Timestamps:
00:00 Introduction
00:39 Getting into a hidden Grub menu
01:05 Change Grub entry to boot into terminal
01:43 Unhiding Grub from Bazzite terminal
03:00 Change Grub entry to boot into terminal again
03:24 Booting to KDE desktop from the terminal
04:04 Using bazzite-rollback-helper to rebase to a working image
04:51 Viewing the logs of rpm-ostree
05:53 Conclusion
Timestamps:
00:00 Introduction
00:40 Where to download Bazzite?
00:50 Installing Ubuntu in Distrobox
01:31 How to launch Distrobox containers
02:31 Installing Audacity in an Ubuntu Distrobox container
03:17 Exporting Distrobox applications to the host machine
04:09 Installing glances in an Ubuntu Distrobox container
05:01 Exporting Distrobox terminal applications to the host machine
06:06 Conclusion
Edit: Note that you might also get this error if you previously installed Fedora workstation or Nobara and you have kept your existing efi partition on the disk.
Second note: if you have an NVME disk rather than an SSD the drive that you need to look at will probably be something like /dev/nvme0n1p1 rather than /dev/sda
Timestamps:
00:00 Introduction
00:32 Switching to TTY and removing fedora folder from EFI
02:29 Installing an Atomic Desktop (Fedora Budgie Atomic)
03:51 Conclusion
In this video we'll be learning how to pin images in Fedora Atomic desktops and we'll be looking at how to rebase to Bazzite from Fedora Kinoite (or Silverblue)
Timestamps:
00:00 Introduction
00:26 Fedora Kinoite
01:02 How to pin images in Atomic Desktops
01:47 Rebasing to Bazzite
03:10 Show option between booting Bazzite or Kinoite
03:55 Installing Bazzite Flatpaks
04:41 Conclusion
Timeline:
00:00 Introduction
00:36 Adopting cross-platform software for operating system independence
00:56 Example software that isn't cross-platform
01:16 Cross-platform software as a solution to the problem
01:45 Cross-platform video editing
02:10 Cross-platform software development tools
02:55 Cross-platform image editing
03:28 Cross-platform email
03:51 Cross-platform spreadsheets
04:42 Using KDE for for a similar look and feel to Windows
05:25 Some distros that use KDE
05:54 Conclusion
In this video we are going to setup a dual boot of Windows 11 and Bazzite (on the same disk). You'd want Windows 11 for any games that do not work at all in Linux. This setup will allow you to have the best of both worlds.
Note: that not all pc manufacterers use ESC to enter the BIOS screen. Also note that I am using Virtualbox so I can easily show the full boot process
NB!! When you get to the MOK management screen the passphrase has changed to "universalblue", it's no longer "ublue-os".
Timestamps
00:00 Introduction
01:14 Installation checklist
01:59 Getting the right Bazzite ISO
02:58 Ventoy, Rufus or Etcher
03:35 Using Ventoy for booting multiple ISO images on a USB flash
05:19 Shrinking space in Windows 11 for another operating system
06:13 Temporarily disabling Secure Boot
07:20 Booting Ventoy and starting the Bazzite install
08:17 Bazzite installation
10:47 Add the Bazzite Secure boot passphrase in MOK management
11:48 Wait for Bazzite setup before boot
12:02 Bazzite setup wizard
12:43 Enabling Secure boot again (optional)
13:19 Check that Secure boot is enabled in the terminal
13:34 Conclusion
After that I jump into a small demo on how to setup Steam and Lutris and I end off with how to install other software using the discover app.
Timestamps
00:00 Introduction to Bazzite and first impressions
01:10 Where are other gaming distros falling short?
02:15 How does Bazzite solve the problems with gaming on Linux?
03:19 A quick demo of Bazzite
03:26 Using X11 rather than Wayland if you have an Nvidia GPU
04:06 Enable compatibility mode in Steam and install GE-Proton
04:24 Installing GE-Proton with Proton-UP
05:07 Enabling Steam compatibility mode to run Windows games
06:27 Using ProtonDB to check if other users have managed to run a game
06:55 Playing non-steam games with Lutris
07:20 Adding Battle.net source to Lutris
07:43 How to install a game store in Lutris
08:29 Adding the Battle.net client in Lutris
08:49 Installing additional software in Bazzite
09:44 Pinning apps to the task bar
09:57 Updating Bazzite
10:40 Conclusion


