AIO inc.
Fairchild VES (Channel F) Hockey - Infinite Loop
updated
About a month ago now, I purchased this 1982 Plymouth Reliant essentially sight-unseen off Facebook Marketplace for the measly sum of $300. Over the next few weeks, I'd begun working on it and amassing parts for it. At the end of the last video, I had the car running just long enough to make sure the transmission was engaging.
This video is much shorter, my assistant from last video of course prefers not to appear, but we didn't do that much. Most of the work was getting new rear tires mounted and balanced, and then installing the janky "NHTSA (dis)Approved Racing-Grade Fuel Cell" which you see on the front of the car. Nothing but the finest! It had turned out that the fuel tank is jam packed full of dirt and rust, and that it needs to be replaced. We also fixed a coolant leak caused by a missing bolt.
The real exciting part is what I caught on video - Taking the car around the block for the first time since it was last registered in 1991! To make a short story shorter, it did make it, but it's obviously got some problems.
It's not as interesting, and not revival related so if I do film any of the following work, it won't appear under this revival series. Only the speedo/odo work, none of the other instruments show even the slightest hint of life. The carb obviously is junk and needs a rebuild badly. Fuel tank replacement is in order, and I think it would be in my interest to change the transmission fluid and filter sooner rather than later. There's also still a coolant leak somewhere, which seems a bit like it might be head gasket related. Mopar or no car, right? Parts are on the way, maybe I'll film the head gasket or at least part of it.
Thanks so much for reading the description this far! If you watched the whole series, I want to thank you for watching all the way through. This is my first "real" revival video, and the first video series I've put time into editing. I appreciate any questions, comments, and advice.
A few weeks ago, I purchased this fairly clean 1982 Plymouth Reliant almost sight-unseen for $300 not running. It came to me with shredded tires and no spark. Turns out that "no spark" condition was something a little bit more serious. Watch and find out!
In this video, I get the car running long enough to test the transmission. But can it be driven?
Spoilers: Needs ignition parts, absolutely no spark at all. I will be acquiring ignition parts for this car soon. In the meantime, I plan to pressure wash the engine bay and potentially the body of the car if it doesn't shred the paint off immediately. I would also like to generally clean the interior a bit to make the car more pleasant to look at and work on. I might make a video out of this as well, we will see.
Yes. Almost instantly. Once it had paper in it, it was printing characters like nothing was wrong. Someone just installed the cable for a new print head incorrectly and it was held together with tape, which was catching on the carriage mechanism and the bottom of the ribbon cartridge. Other than that, it was 100% okay, even the ink ribbon was still alright after the better part of 2 decades in pretty pathetic conditions.
I want to do more of these but first I need printers that don't actually work correctly! I will find some, given time. No crappy modern deskjets or anything, though.
More to come.
This is just an impromptu video I took at our local junk store before purchasing some items, specifically two large printers for an upcoming video or two I have been planning for a while.
I always enjoyed the "revival" and "resurrection" videos people like shango066 and Jennings Motor Sports put out, but I don't have the money for cars or the space for that many televisions, sadly.
I thought to myself, "What do I have the space for?" and of course, I always have more room for vintage computer equipment, and I've always found vintage printers very interesting. Don't see that many videos on YouTube either, and never in good quality. This started with that IBM ProPrinter I bought a while back, which came from the same junk store (though in the much cleaner, nicer section) and only needed a mild cleaning to work. This time, I figured I'd go further into the store and pick up a couple printers which had spent at least the better part of two decades (maybe more) essentially outside: In an open window, leaky roof barn connected to the building at the back. I had planned to get more, but many were missing pieces (NEC SpinWriter 8800) or I could not find ink for (Really wanted that IBM ExecJet II if anyone can find me a cartridge for it). It was a real shame, but I had to leave most of them behind for now. Maybe in the future I can go back and dig them out of their graves as well.
The first "Bondi Blue" iMac G3s shipped with 2MB of VRAM onboard, with a slot to allow the installation of a 2MB or 4MB SGRAM module to bring the total to 4MB or 6MB of VRAM. Later on, Apple began shipping this slot pre-populated with a 4MB module to give all users 6MB of VRAM, which is plenty to fully utilize the iMac's internal display. But is this the limit? Apple used existing ATi video chipsets that were common in the PC world, and were sometimes even shipped with up to 8MB of VRAM!
I set out to find an SGRAM module larger than 4MB, and I came across the eBay listing posted below, from a gentleman who appears to have found a case of brand new Compaq-branded 8MB SGRAM modules. I paid a very reasonable price and the module just showed up today. In this video, I show some basic disassembly of my rev D iMac G3 grape and installation of the module.
More projects on the way, hopefully.
Spoilers: Nope! I'm not sure if Apple changed something in the software, or if there is an addressing error / cut control line, or that the second bank is not accessible for some reason, or that it has a limit of 8MB that must be on proper banked boundaries or something and the onboard 2MB is misaligning the module in it's address space or what, but it only shows 6MB installed. Kind of a bummer but it was an interesting experiment anyways, I thought. It does bring the iMac back to it's "maximum" which I still don't fully believe, but there's likely no benefit to installing more memory anyways. Maybe someone with more time and knowledge on the architecture of the iMac G3 or it's video chipset can provide us some insight in the comments or will find a way to make it work regardless! One can only dream.
The listing: ebay.com/itm/115477069353
Sadly it's just about out of ink and I'll probably never find more, so I figured I would capture this printer in it's "glory" before it inevitably fails or it's output becomes illegible permanently.
If I can find an ink source or a way to improve it's output, I will probably do a full unbox-setup-walkthrough.
I also have another printer-related project in the works that will hopefully be coming very soon, and if I can find the parts I need there are 2 other computer videos down the line to look for.
I was going to start this with a bench power supply but the starter draws like 50 amps! Instead, I'm using an old lithium motorcycle battery I had laying around. Third time cranking and it actually broke the 3D printed mount, which is why I jam a screwdriver in it in the video.
I bought the starter kit and while it took forever to show up it was convenient to set up. I hate the way the glow plug wires attach, though. It's sitting loosely on a piece of packing foam I found, which seems to be a great size and shape for the engine.
Now the question is to find a more permanent mount or figure out what I'm going to stick it in.
Oh, and I ordered a new starter mount and belt.
http://aioinc.ddns.net/HOST/files/other/boom_beach_explosion.mp4
Unfortunately, they denied my appeal and their support system is total garbage, so it will not be reuploaded here. They were making too much money off it anyways, I guess.
The original view count is now lost, since they also wiped my statistics, but it was around 13,000 or so last time I checked.
Original upload date: 12/26/2019
Below is a copy of the original description:
Merry Christmas, everybody!
I've been wanting to make this video for a long time now, since around February or March even, and I've only just gotten around to making it.
It turned out fantastic, I think!
The original video is "Doctor T's Song," an ad for the mobile game Boom Beach.
The original song is "The Black Ninjas," which can be found on SoundCloud here: soundcloud.com/da-ninjaz/the-black-ninjas
MOD file download here: http://aioinc.ddns.net/HOST/files/other/bm_main.mod
Translated Readme from the game: http://aioinc.ddns.net/HOST/files/other/bm_readme.txt
(C)1995 Blood Software(?)
youtube.com/watch?v=NlJ3CqcmFhE&t=2700s
To be perfectly honest, I couldn't even afford this one, but I this guy showed up on eBay "non running for parts" and I got it for $280.
Turns out it's brand new in the box! Pretty happy about that.
I've ordered some parts for this thing, since it doesn't come with glow plugs, drivers, an ESC, fuel, cell or line, etc. I'll make updates as I can.
Hope you enjoy, more to come
Nobody complained about mimicking the Rytmik UI colors last time, so I've used them again. This song only has 3 tracks for me to visualize.
Again sorry for any noise in the output, this was recorded from my real 3DS and I had trouble making it cleaner without massively distorting the audio.
(C)2011 Cinemax Games
http://rytmik-retrobits.cinemax.cz/
Runs pretty good! Hitting on all 4 despite worn out rings. Needs bottom end done next, plan to replace rod bearings, rings, oil pump. Next big thing is going to be timing belt and more electrical work
Any ideas?
It doesn't squeal anymore and it now charges its battery though so it's something
Enjoy nonetheless.
Fires up pretty decent and the battery was fine too surprisingly
It's not good but it's an entertaining effect.
I like that the Yugo's proposal for repair is just "Drive me faster and I'll charge the battery"
Guess this means I need to start looking for an alternator now, it might just be the belts but I'm not sure. For a while it would just dimly light on occasion and go away, I always figured it was belt slippage from the total garbage 20 year old belts, but this has definitely gotten worse.
Of course, it's not all that interesting and most of the work was putting an alternator and belts on (Which is why it got parked in the first place) but hey, it's content.
This is the first time I've put some real effort into editing a video instead of just uploading 45 minutes of raw footage OR 8 different 2 minute clips. Hopefully it's okay.
I had a longer video recorded but the file got corrupted during editing, so here's the short clip I got with my phone.
The car needs rear shock absorbers, really really really bad. They're totally junk and the rear of the car bounces all over the place.
Also, the car has an exhaust leak and I still don't have full throttle, though this didn't stop it from reaching 80 and maintaining a solid 65 the whole way home. Not too shabby! Didn't overheat and I wasn't a huge burden on traffic the whole time either.
Even with those fixed, would I recommend it?
Not if you value your life, no.
When you first boot the machine you get this crazy pattern but after a moment the screen is just perpetually black. Any suggestions?
Featuring: the gauge cluster from my parts car
Unfortunately when I got to the end of the driveway it died and would not restart. I've lost ignition it seems.
It also runs suspiciously better without the spare tire... No idea what's going on here.
All new ignition bits except distributor which is on the way. All new carburetor bits. All new vacuum lines. New fuel pump, lines, and filter.
Any thoughts?
Didn't even disconnect the battery, it didn't leak anything, and it fired right up. Little bit of belt squeak but I can live with that for now.
All things considered pretty good I'd say!
It'll be coming back out in another month for the winter, when the Geo gets put away.
What else is there?
Still smokes real horribly, not sure why. Friend of mine suggested I put silicone on the intake gasket as there is a water passage through it, which is what I have done. It will be dried in 24 hours and we'll try this again.
Swapped the plugs and wires for a brand new set and double checked my timing, all looks good but I've still got a miss.
Not sure what else to suspect. I'm gonna run a compression test sometime and see what she's running on.
As it turns out, if you mostly run an engine with oil and then run it completely dry for several minutes, all the pieces get very hot and some get scored. It will need a rebuild now, I think, or at least resurfacing.
Sorry about the noisy output, I recorded this from real hardware and I can't get Audacity to reduce the noise without affecting the music horribly. It's still watchable though, I think.
(C)2011 Cinemax Games
http://rytmik-retrobits.cinemax.cz/
Maybe I'll clean it up and soft-restore this thing, it's quite a nice printer.
Sorry about all the computer videos lately, I'm waiting on parts and playing with other junk in the meantime.
Sneak preview of my next video is in here too.
Spoilers below!
If it wasn't obvious it didn't work, we think the cylinder head is warped. This may also be the source of the catastrophic oil leak at the back of the engine.
Depending on the price of a reman / new head or getting this one repaired, we may or may not take it apart again.
At least we didn't make it any worse. The only local shop that would touch it quoted me $1200. I spent less than $100 in parts and we spent about two days total actually working on it, so I'm not too upset about this failure. Can always try again with something else...
Suppose that means I better get back to fixing that there Yugo while I wait for parts on this thing.
Buncha stuff planned for upgrades and repairs to this sucker so stay tuned if you want to see any of it
I never want to tune another carburetor as long as I live.
Oh, and the AC still works.
But it will now start and run reliably and will usually idle on it's own perfectly fine
And it still won't run unless you hold the throttle wide open, in which case it will barely run for about 4-5 minutes until the choke opens to about the second tick and then it dies
Help? Thoughts?
Short answer, yes of course it will because it is by far the most reliable thing I own
Original video
youtu.be/zmGOa5xVPuw


