Lost In Tech
Why your 3d printed stuff doesnt fit together and how to fix it!
updated
Dryer - SP2 - lostintech.co.uk/sunlu_SP2
General Sunlu link: lostintech.co.uk/sunlu
These are affiliate links.
I made this video because lots of people are using their filament dryers incorrectly - hopefully we can all dry more efficiently now! It even works for laundry, in case you were drying your laundry in a bucket. Don't do that.
Also in case you're wondering about those timelapses and slow motion things? 250gb of raw footage. Yeah. Just for 22 mins of video.
Credits:
@3dPrintsAndLeaves for graphics.
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Let's try to figure out why it's so cheap though.
Buy Elegoo Centauri Carbon here - shareasale.com/r.cfm?b=2732740&u=3275867&m=104244&urllink=&afftrack=
(Above is an affiliate link, meaning a percentage of sales is potentially paid out as commission)
Credits:
@3dPrintsAndLeaves for graphics.
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Note. Elegoo provided the centauri carbon model for the review at no cost.
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're going to look at a surprisingly little known feature that you really should be aware of. It's the difference between multi-material prints failing and prints working.
And it's multi material interlocking. AKA ITIL.
~Worth noting if you're in the "can't print multi material TPU camp" that this applies to ALL incompatible materials. PETG/PLA for example. ~
*The boxes*
printables.com/model/1270674-tpu-hinged-box-multimaterial-interlocked
(I'll add more)
printables.com/model/1269998-an-experiment-into-a-constrained-compliant-hinge
(to be continued!)
Source files are here patreon.com/lostintech
The Paper: https://pure.tudelft.nl/ws/portalfiles/portal/103402631/1_s2.0_S2214860421006424_main.pdf
IF you are interested in the PRUSA XL after seeing this, it's a great printer unsurprisingly :) Please use my affiliate link: http://www.prusa3d.com/#a_aid=lost
Credits:
@3dPrintsAndLeaves for graphics.
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
(affiliate link)
Credits:
@3dPrintsAndLeaves for graphics.
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Note. Sovol provided the printer for the review at no cost.
Models used:
printables.com/model/209121-cali-dragon
printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
printables.com/model/707321-folding-adjustable-phone-stand
Gymnopedie No 2 by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100786
Artist: http://incompetech.com
I FORGOT THE LINK AGAIN. Not very good at this affiliate stuff :)
Buy a Creality Hi Here: shareasale.com/r.cfm?b=2015992&u=3275867&m=124834&urllink=&afftrack=
Here's the STL and F3D files for the letter/frame thing in case you want to write random things too: patreon.com/posts/124240078 (currently available to free members too)
Music used in this episode: epidemicsound.com/playlist/a0zwqsetmasjeb7lczi9hkdycmyk6c8k
Credits
Graphs and graphics: youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're looking at the Prusa CORE One! And why this could be the most open printer out there from a user perspective. Spoiler, we're looking at the GPIO board and some other stuff! :)
PRUSA CORE ONE: http://www.prusa3d.com/#a_aid=lost
(affiliate link)
The Core One was sent free of charge for me to review. No I wasn't paid by Prusa to review it.
CoreBOXX (MMU container) printables.com/model/1178997-prusa-core-one-coreboxx-premium
Credits
Graphs and graphics: youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Models used: printables.com/@lostintech/collections/2068902
Note: The comments are tentatively re-enabled. Balanced criticism is WELCOME. Trolling other users is not, nor is accusing me of being some kind of paid shill - if only. Thank you.
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're looking at some really interesting phenomena that you never would imagine you'd be able to see, or never thought existed. And there's no shortage of googly eyes.
PRUSA CORE ONE: prusa3d.com/?promocode=LostInTech
(affiliate link)
Credits
Graphs and graphics: youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also includes print comparisons :)
Buy a K2 Plus here: shareasale.com/r.cfm?b=2582741&u=3275867&m=124834&urllink=&afftrack=
Models used: printables.com/@lostintech/collections/1898843
Credits:
@3dPrintsAndLeaves for graphics.
Support Me: patreon.com/lostintechJoin us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're looking up REALLY CLOSE at things. Because they're tiny. We're going to see if we can print miniatures on FDM printers, and if we do, what do they look like?
Profiles are all patreon.com/posts/profiles-and-116846083?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
(You can get a free trial now on patreon if you wish so go check it out)
Some links (affiliate, mostly):
Prusa (their filament is pretty good too at miniatures!) http://www.prusa3d.com/#a_aid=lost
Phaetus cocoon dryer : lostintech.co.uk/phaetus
Sovol for SV08 or dryer : lostintech.co.uk/sovol-is-ace
Bambu A1 : lostintech.co.uk/bambu-a1
Filament I've found works well with miniatures:
Creality Hyper filament (especially grey):
Prusament:
Bambulab basic PLA: shareasale.com/r.cfm?b=2282157&u=3275867&m=138211&urllink=&afftrack=
Models
Almost every miniature in the video: printables.com/@MZ4250/models
The others: printables.com/@lostintech/collections/1935116
Credits
Graphs and cactus logo: youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintechJoin us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
BUY THE AMS TPU: lostintech.co.uk/bambu_BF
(scroll down to "new arrivals")
The above is an affiliate link.
Today we're looking at the NEW TPU from Bambu that will work in an AMS, AMS Lite, and presumably any multi material system. What's the big deal?
Cactus stamp thanks to youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintechJoin us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ memberssecond channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Buying one? Please use my aff link: lostintech.co.uk/sv07_nt
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Models: Cali Dragon by Mcgybeer printables.com/model/209121-cali-dragon/files
Gargoyle by 3dprinty printables.com/model/1020039-mini-gargoyle-sculptember-model-10
The test "factory" printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
Manim Animations (charts) and Cactus logo thanks to youtube.com/@3dPrintsAndLeaves
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're looking at 95A TPU. And how SLOW IT PRINTS. But why? Who's to blame? What can we do?
Manim Animations (charts) and Cactus logo thanks to youtube.com/@3dPrintsAndLeaves
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
I will put some links to the products you see in the video. Some are affiliate, some not.
FLSUN for the best two TPU printers I own lostintech.co.uk/flsuns1
lostintech.co.uk/flsunt1
Conch Plus Nozzle: lostintech.co.uk/conchplus
Sovol (whenever the SV06ACE is live!) lostintech.co.uk/sovol-is-ace
Sunlu who happen to apparently make really good TPU lostintech.co.uk/sunlu
Models: Cali Dragon by Mcgybeer printables.com/model/209121-cali-dragon/files
Octopus printables.com/model/272-pixel-octopus-minimal-voxel-octopus/files
Gargoyle by 3dprinty printables.com/model/1020039-mini-gargoyle-sculptember-model-10
leg benchy thingiverse.com/thing:6543737/files
Thank you @3dPrintsAndLeaves for the manim charts.
In this episode we take a deep dive into 83A, 85A and 40D TPUs to see how hard they are to print with modern, better designed printers.
Phaetus Products:
Creality nozzle: lostintech.co.uk/ph-cr
Apus Extruder: lostintech.co.uk/apus2
Conch Plus: lostintech.co.uk/conchplus
Nextruder SiC Nozzle: lostintech.co.uk/ph-nx
The above are not affiliate links
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Models:
printables.com/model/273544-portal-companion-cube/files
"Farting Around" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we are looking at the PRUSA MK4S Upgrade - specifically the upgrade from the MK4.
Prusa provided the upgrade kit to me at no cost with no expectations. Opinions are mine.
**MK4S upgrade kits, or machines, or XLs: use this link - **
http://www.prusa3d.com/#a_aid=lost
Using this link usually earns me a commission and helps support the channel so it's appreciated!
Credits:
Thanks @3dPrintsAndLeaves for the charts
Models that aren't mine: printables.com/@lostintech/collections/1719292
The Lost Factory Cube (calibration cube): printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
If you're a supporter you can get a manual for it too! patreon.com/posts/lost-in-tech-v2-97275622
The spring: patreon.com/posts/for-next-video-112671846
(free members can also access this)
General Patreon Link: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we are looking at RECREUS conductive TPU.
Recreus provided this reel (about a year ago!) for me to mess around with.
See the filament here (not an aff link) recreus.com/gb/filaments/3-filaflex-conductivo.html
Thanks @3dPrintsAndLeaves for the charts
The following links support the channel by means of affiliate commission
Buy a Prusa Mk4 or XL - http://www.prusa3d.com/#a_aid=lost
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Check it out here:
sunlu.co.uk/products/filament-connector-fusion-splicer-weldable-to-pla-abs-petg-pcl-pa-and-pc
The PLA 2.0 is here:
sunlu.com/en-gb/products/moq-6kg-pla-2-0-upgraded-pla-pla-plus-3d-printer-filament-1kg
Also check out SUNLU here
lostintech.co.uk/sunlu
This video is sponsored by SUNLU.
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
The following links support the channel by means of affiliate commission
Buy a Prusa Mk4 or XL - http://www.prusa3d.com/#a_aid=lost
HAVE you seen the new Prusa Mk4S or the upgrade kit? If you want to support me, check it out through this link: prusa3d.com/product/original-prusa-mk4s-3d-printer-5/#a_aid=lost
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
Today we're looking at the PRUSA XL - an insane beast of a printer that's like no other.
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
The following links support the channel by means of affiliate commission
Buy a Prusa Mk4 or XL - http://www.prusa3d.com/#a_aid=lost
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
Today we're looking at Prusaslicer's Modifiers, and how this powerful functionality can really change your slicing skills.
These also work in Bambu Studio and Orcaslicer, also SuperSlicer.
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Model Credits:
Radiator Key: printables.com/model/282979-keychain-radiator-key
Voronoi scraper: printables.com/model/629369-scraper-scraper-scraper
Cactus svg : courtesy of youtube.com/@3dPrintsAndLeaves
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
The following links support the channel by means of affiliate commission
Buy a Prusa Mk4 - http://www.prusa3d.com/#a_aid=lost
I'm still using a DiamondBack nozzle on this printer - You can buy DiamondBack Nozzles here (amazon USA): amzn.to/4cFdque
Today we're looking at PrusaSlicer 2.8 which has a couple of new features worth knowing about. Those would be the new slicer preview option for "actual speed" and some updated diagnostic information on the preview screen. Along with some other bits. Let's have a look at them and also watch some slow motion printing.
Download PrusaSlicer 2.8 - github.com/prusa3d/PrusaSlicer/releases
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we're looking at DiamondBack nozzles - the hardest thing since...well, things. It's diamond. Obviously.
Update! E3D have just announced (yes it's official) a Bambu DiamondBack Hotend - e3d-online.com/products/diamondback-bambu-lab?aff=38
Article about flow rate (Patreon required): lostintech.co.uk/2024/06/20/diamonds-scope-creep-and-narratives
graphs courtesy of youtube.com/@3dPrintsAndLeaves
You can buy DiamondBack Nozzles here (amazon UK): amzn.to/3VZmm7Z
or here (amazon international): amzn.to/4cFdque
Also E3D: e3d-online.com/products/revo-diamondback-nozzles?aff=38
Prusa MK4: http://www.prusa3d.com/#a_aid=lost
FLSUN S1 if you want to achieve high flow rates: lostintech.co.uk/flsuns1
Above are affiliate links
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Correction:
2:13 - The order is incorrect, the graph should read Diamond, Ruby, Tungsten, Steel, Brass, Copper
See the FLSUN S1 here - lostintech.co.uk/flsuns1
*Video Sponsored By SUNLU*. See the HS PLA here -lostintech.co.uk/sunluHS
General link to SUNLU - lostintech.co.uk/sunlu
See the FLSUN T1 - lostintech.co.uk/flsunt1
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Check out the Prusa MMU3: prusa3d.com/category/original-prusa-mmu3/#a_aid=lost
Prusa XL: prusa3d.com/en/product/original-prusa-xl-semi-assembled-5-toolhead-3d-printer/#a_aid=lost
General Link to Prusa: http://www.prusa3d.com/#a_aid=lost
Today we take a look at PRUSA's MMU3 which has just been released for the MK4 printer (it's been out a while for the MK3s but there's some changes for the MK4). Let's see how good it is!
Links to models used: printables.com/@lostintech/collections/1460779
Fair Warning: As always with large brands I'm expecting some obnoxious comments from some of you who seem to think 3d printer brand tribalism is somehow worth your mental energy. Nobody wants to hear it, and you'll be banned from commenting / strict auto moderation is on, so keep it civil and polite if you want your comment to post :)
If you're interested - I bought the MMU3 myself without Prusa's involvement or any discussion with them aside from casual mention, but they did provide the MK4 previously to me at no cost. They are not sponsoring this video.
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Today we test out those cheap 3D Printer nozzles we were looking at in Episode 1. How did they perform?
Some aff links to the products mentioned:
microscope objectives: (go with red or yellow) https://s.click.aliexpress.com/e/_DD05Lnl
Amazon: amzn.to/4bvdGuU
or amzn.to/3QJ860l
I bought both those two off amazon. I think theyre literally all the same though across the internet. The red one is the best for starting.
The Astrhori lens (for various mounts) amzn.to/3ww3WC2
Macro slider, absolutely essential for this stuff: amzn.to/3UHEyRR (cheaper ones exist)
These v6 nozzles at time of publishing were fine: amzn.to/4dAqsdD
Pin gauge if you're into that: amzn.to/3QJ0LgW
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Nozzles Chapter 1 - youtu.be/BU8winnzHkc
arachne vid : youtu.be/jRyRlEzUIaA
nextruder plaque printables.com/model/734543-random-hueforge-picture-of-a-nextruder-nozzle
Chapters
0:00 Intro
0:29 Nozzle sequence
2:03 Initial Conditions
2:51 The Question?
3:27 Quality Tests
4:00 Oddly Placed Music Sequence
4:46 The Quiz
7:21 Quality Results
7:48 Other Sizes?
7:59 How do you measure a nozzle?
8:51 You need gear.
10:23 Nozzle Orifice Variance
11:59 Faulty Nozzles Tho?
12:36 Wear, tear and bedding in
13:35 Slow Mo, Oh no!
15:08 Play Dohn't
16:17 Damage Tests
16:44 PCBWay made this possible
18:58 Damage Results
22:14 Worn not Worn?
22:57 Sum up.
Links:
stldenise3d.com/come-3d-print-with-us-community-3d-printed-art-project
my test cube : printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Today we take a look at Orcaslicer for the first time ever on the channel.
Links:
Sovol SV08 !! - lostintech.co.uk/sv08
comgrow - use the same link as above :)
(affiliate)
seams guide: printables.com/model/783313-better-seams-an-orca-slicer-guide-to-using-scarf-s
mushroom thingiverse.com/thing:6536656/files
torque wrench printables.com/model/255945-nozzle-torque-wrench/files
modbot video on adaptive mesh: youtu.be/MytEGvAoYtY?si=etarguZHyxEqFx9m
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
To check out the ENDER 3 V3 (I actually really like this printer!) : lostintech.co.uk/e3v3yt1
To check out Reflect-o-lay, just google it :)
Models used:
spoke beads thingiverse.com/thing:12625/files
Vids linked:
Shore hardness - youtu.be/3VulaksxOio (or check out the playlist on TPU!)
Nozzles - youtu.be/BU8winnzHkc
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Other random stuff:
The Panasonic G9 used in this video (it's cheap these days!): amzn.to/426tNf1
The macro lens (micro 4/3): amzn.to/3HjvnRk
Music: share.epidemicsound.com/e8ahnq
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
The filaments I used (incl. affiliate links):
Yousu: amzn.to/3wu2CPs
Reprapper: amzn.to/4bJYhIk
Prusament: prusa.com obviously :)
Calibration cube: printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
ChelsCCT: balloon dog thangs.com/designer/ChelsCCT%20%28ChelseyCreatesThings%29/3d-model/Balloon%20Dog-277293
Models used in this video: printables.com/@lostintech/collections/1243178
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
second channel - @foundintech
Other random stuff:
The Panasonic G9 used in this video (it's cheap these days!): amzn.to/426tNf1
The macro lens (micro 4/3): amzn.to/3HjvnRk
Music: share.epidemicsound.com/e8ahnq/?playlist=h1kk6cjkfpgbp7q5nqpx1g25xr556zz1
Other Music:
Hall of the Mountain King by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1200072
Artist: http://incompetech.com
Addendum: I also noted that there's a rubber strip on the door hinge to help stop air getting past the gap in the glass on the K1C.
BUY A K1C - shareasale.com/r.cfm?b=2507401&u=3275867&m=124834&urllink=&afftrack=
(might have 5% off depending how old the video is)
Note: The K1C was provided by Creality for the review.
Models:
NEW Calibration "Factory" Cube: printables.com/model/741049-lost-factory-cube-a-generalist-diagnostic-cube
THIS IS FINE dumpster model: thangs.com/designer/stldenise3d/3d-model/Dumpster%20Fire%20with%20Light%20Up%20Action-1001434
K1 root guide: github.com/Guilouz/Creality-K1-and-K1-Max
Nathan Builds Robots (When he's not destroying them) - youtube.com/@NathanBuildsRobots
Fixumdude's Jeep: printables.com/model/518717
Vase: printables.com/model/341793-fleur-ripple-vase
Patreon: patreon.com/lostintech
The music in this video : share.epidemicsound.com/e8ahnq/?playlist=o42ii0frr0zpqpnex8kcx2lrtoiqsqb4
Print Profiles: patreon.com/posts/creality-k1c-97987015?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
tech data: to follow
The Creality K1C was provided at no cost for my tests.
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
2nd episode! youtu.be/GXvG3fKPk-Q
Support Me: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members
cat courtesy of @ZombieHedgehogMakes
second channel - @foundintech
In this episode we dive DEEP into nozzles. Yes, into. Watch to the end.
Some links to things in the video:
Creality nozzles on Aliexpress: https://s.click.aliexpress.com/e/_DdduN5R
The Panasonic G9 used in this video: amzn.to/426tNf1
The macro lens (micro 4/3): amzn.to/3HjvnRk
The Microscope amzn.to/42amW4f
Helicon Focus: heliconsoft.com
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
It's the end of 2023, and we can't deny this has been a crazy year in 3D Printing. What's coming up in 2024? Who knows? Let's talk about it.
If you want to purchase any of the printers or whatever in this video it would be cool if you used my affiliate links:
Bambu Lab: lostintech.co.uk/bambu-a1
Elegoo: lostintech.co.uk/elegoo
Sovol: lostintech.co.uk/sovol
Creality: lostintech.co.uk/k1max
FLSUN: lostintech.co.uk/flsun1
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members !
Bambu have brought out their..fourth? printer this year - the All new A1. It's like the mini, but it's a bed slinger. Yes - a bed slinger. Let's check it out!
As promised the full spec/test sheet is at the bottom of this article lostintech.co.uk/2023/12/18/the-new-bambu-lab-a1-is-a-budget-friendly-4-colour-powerhouse
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP
Models used:
fox - cults3d.com/en/3d-model/game/articulated-fox-mcgybeer
Music from Epidemic Sound: share.epidemicsound.com/e8ahnq (aff link)
Please note that the printer (Bambulab A1 Combo) was provided at no cost for review. Please also note that affiliate links reward a commission to this channel if you go on to buy.
I try to keep a list of random stuff I use/buy, it is surprisingly random.
Link to Amazon (.com) Storefront (Affiliate): amazon.com/shop/lostintech
Link to Amazon (.co.uk) Storefront (Affiliate): amazon.co.uk/shop/lostintech
*Sponsored by SUNLU*: Visit SUNLU to see BLACK FRIDAY offers! lostintech.co.uk/sunlu-full
All models not created by myself or chatGPT are credited to FullControl.
Links to fullcontrol:
https://fullcontrol.xyz/#/models
http://www.fullcontrolgcode.com
github.com/FullControlXYZ/fullcontrol
The design template (the quickest way to start): colab.research.google.com/github/FullControlXYZ/fullcontrol/blob/master/models/colab/design_template_colab.ipynb
Thank you also SOVOL for providing the SV07+ for use in this video. You can visit SOVOL here: lostintech.co.uk/sovol
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members !
Farting Around by Kevin MacLeod / licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300012
Artist: http://incompetech.com
The CR-10 SE is actually in the Black Friday Sale at the moment, click here to check that sale out (many models!):
UK: shareasale.com/r.cfm?b=2449831&u=3275867&m=124834&urllink=&afftrack=
EU: shareasale.com/r.cfm?b=2449828&u=3275867&m=124834&urllink=&afftrack=
USA: shareasale.com/r.cfm?b=2449826&u=3275867&m=124834&urllink=&afftrack=
The material used in the vase was SOVOL universe rainbow PLA: lostintech.co.uk/sovol
All the above are affiliate codes, I gain a commission if you use these links.
Note: The Creality CR-10 SE Was provided for the purposes of the tests in this review. No other material or financial exchanges in association with this review were agreed, or other conditions of review.
Models:
Stoli by Bryan Vines
Sugar cube vase and round scoops by Triple G Workshop
Rocket engine by Prusa Research.
Model links : printables.com/@lostintech/collections/953441
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
Cura 5.5 is here and I don't think it's hyperbole to say this changes things. It genuinely will. Engine plugins are the main new feature (in my opinion) and these unlock THE ACTUAL SLICER (some parts of it, it's complicated..) for anyone with any dev skills to write plugins that can radically (potentially) change how the slicing process works. I know that's a sentence with a lot of caveats in it, but I am calling it now: this is big.
Watch to see a little preview of what they can do.
link to give feedback on engine plugins: github.com/Ultimaker/Cura/discussions/15629
*Infill tile plugin has now been released*: marketplace.ultimaker.com/app/cura/plugins/UltimakerPackages/CuraEngineTiledInfill
For Devs: github.com/Ultimaker/CuraEngine_example_plugin_python
Models:
tape splicer thingiverse.com/thing:4483383
Others: printables.com/@lostintech/collections/947672
3dprintsandleaves channel: youtube.com/@3dPrintsAndLeaves/featured
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members !
Local Elevator and Farting Around both by Kevin MacLeod / licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/by/4.0
Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1300012
Artist: http://incompetech.com
The filament: recreus.com/gb/filaments/9-702-filaflex-82a.html#/2-diameter-175_mm/3-weight-500_gr/23-colour-magenta
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
The stable release of PrusaSlicer 2.6.1 is out, and it's got the contents of Prusaslicer 2.6.1 RC1 and RC2 in it. In this video, I check out the main new features. Enjoy.
Get PrusaSlicer here: github.com/prusa3d/PrusaSlicer/releases
Models: printables.com/@lostintech/collections/916995
Cactus logo thanks to youtube.com/@3dPrintsAndLeaves
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members !
Sponsored = the machine was supplied by PRUSA.
If I really have to link you to it - fine. thingiverse.com
* posh way of saying evidently
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP -- we have 600+ members !
Link to Amazon (.com) Storefront (Affiliate): amazon.com/shop/lostintech
Link to Amazon (.co.uk) Storefront (Affiliate): amazon.co.uk/shop/lostintech
(affiliate link)
**Save Extra $10 for Ender-3 V3 SE with Code ESE10**
stl: thingiverse.com/thing:4913078
- Early Bird Pricing as low as $79.99
In this episode I'm taking a look at this unusual but entirely usual filament that melts at temperatures between 60 and 110C ish, and we'll see if I can print with it. Obviously yes. Otherwise it wouldn't be in the thumbnail. But, it does present its own challenges!
**WARNING**: I should probably mention that if you print filament not meant for your printer, you do it at your own risk. I mean, the Facilan *is* meant for your printer, but the other stuff isn't, so bear that in mind. Warranties most definitely voided! Potential for breaking your stuff, your self, etc.
Models:
Rook: printables.com/model/98984-chess-rook
Poo shape: me
Bone shape: also me
If you want to support the channel, you can via patreon: patreon.com/lostintech
Filament shown in the dryer by sunlu: lostintech.co.uk/meta
Printer shown, elegoo neptune: lostintech.co.uk/elegoo
link to amazon store with colour changing beads:
Link to Amazon (.com) Storefront (Affiliate): amazon.com/shop/lostintech
Link to Amazon (.co.uk) Storefront (Affiliate): amazon.co.uk/shop/lostintech
(affiliate link, I get a % of sales made through the above link)
**Save Extra $10 for Ender-3 V3 SE with Code ESE10**
So - The Ender 3 V2 finally got an upgrade. It seems weird though, it works out of the box, and I didn't have to build it from parts. Times have changed a lot.
Printer was supplied by Creality at no cost.
Models:
Triceratops: cults3d.com/en/3d-model/game/ar-triceratops
Train: thingiverse.com/thing:3254947
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP
Also get $5 of credit if you sign up to PCBWay using this link pcbway.com/setinvite.aspx?inviteid=575537
3D Printing Supports - they're better. Better than even a couple of years ago. We should talk about that.
The printers used in this video were the bambulab P1S and X1C: lostintech.co.uk/P1S
And the new Ender 3 V3 E3 ($199!?): lostintech.co.uk/E3V3
Also the sovol SV04: lostintech.co.uk/sovol
All the above are affiliate links.
Cactus logo thanks to youtube.com/@3dPrintsAndLeaves
Models:
dice: thingiverse.com/thing:551/files
velociraptor: printables.com/model/265877-velociraptor/files
mushroom by Artec: thingiverse.com/thing:16146 (originally artec3d.com/3d-models)
MODBOT: youtube.com/@ModBotArmy/videos
"Lobby Time" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0
Full review coming soon, initial observations make this look quite formidable in the budget printer market.
link: lostintech.co.uk/e3v3
**Save Extra $10 for Ender-3 V3 SE with Code ESE10**
(above link is an affiliate link, I get a commission if you buy an ender3v3)
**Save Extra $10 for Ender-3 V3 SE with Code ESE10**
(above link is an affiliate link, I get a commission if you buy an ender3v3)
Sovol Filament (triceratops used this): bit.ly/SFIL1
The above links are affiliate links, so following them before purchase will normally pay me a commission fee.
Please note that Creality sent the K1 Max over at no cost to me.
Notes: 1. yes some artifacting in a couple of places, but hey, it's better than the interlacing. I don't know what davinci resolve's deal is at the moment. I think it didn't like the 1000x speeds. Not a huge deal. I rendered this in 4k even though only some of the footage is 4k. Let me know if that is a thing you found useful or not.
2. Yes I know the big "max" has a lot of ghosting - I did this piece in 2h12m and it's 200mm wide, I was maxing out the printer, of course you'll get this. Deadlines are a thing.
Yes I have a website now where I write random things when I have time:
lostintech.co.uk
Links to the filament in the thumbnail: amolen.com
Links to models:
Crystal dragon: cults3d.com/en/3d-model/art/baby-crystalwing-dragon-cinderwing3d-articulating-flexi-wiggle-pet-print-in-place-fantasy
Triceratops: cults3d.com/en/3d-model/game/ar-triceratops
If you want to support the channel, you can via patreon: patreon.com/lostintech
Join us on Discord!: discord.gg/tQQPNSCTKP
Buy K1 or K1 Max here: lost3d.link/k1max
Note the above is an affiliate link (I make a commission) and the K1 and Max were sent to me at no cost by Creality
I know links aren't clickable on yt shorts any more so I've linked it at
lost3d.link/apf to make it easier to type in.
If you want to buy a formlabs fu....haha just kidding. They're £20k :)
If you enjoyed this and want more, let me know in the comments. If you enjoyed this but want longer versions, also let me know in the comments!


