LifeHack2012As promised, here's my "simplified diy free energy generator" video. Select "HD 1080p" to view all the details of this machine in highest quality. My video was shot at: 53.322062,6.206194 (insert in Google Maps), september 1st, 2012. This is the raw video footage (only inserted some titles).I drove 38 miles to this remote location, it's a nice place to sit, eat and relax and it's not near any buildings. It's easy to build yourself, although it took me 3 tries to get this one working. Please give me feedback if you improve it, so I can create a better version. It's base is a strong neodymium magnet and a self wound coil. The magnet was salvaged from an old harddisk - these are véry strong and easy to find! I tried round earth magnets (18mm Ø and 2mm thick) from eBay but they don't seem to work. Maybe the shape to create the magnetic field isn't right? I think it's not a perpetuum mobile, the power has to come frome an external source. Maybe zero point? Voltage is stable, even under load, that's promising!
free energy generator - outside - filmed in one takeLifeHack20122012-09-01 | As promised, here's my "simplified diy free energy generator" video. Select "HD 1080p" to view all the details of this machine in highest quality. My video was shot at: 53.322062,6.206194 (insert in Google Maps), september 1st, 2012. This is the raw video footage (only inserted some titles).I drove 38 miles to this remote location, it's a nice place to sit, eat and relax and it's not near any buildings. It's easy to build yourself, although it took me 3 tries to get this one working. Please give me feedback if you improve it, so I can create a better version. It's base is a strong neodymium magnet and a self wound coil. The magnet was salvaged from an old harddisk - these are véry strong and easy to find! I tried round earth magnets (18mm Ø and 2mm thick) from eBay but they don't seem to work. Maybe the shape to create the magnetic field isn't right? I think it's not a perpetuum mobile, the power has to come frome an external source. Maybe zero point? Voltage is stable, even under load, that's promising!LG OLED TV - extreme burn-in - LG says your fault, no warrantyLifeHack20122019-11-29 | I bought this 55 inch LG OLED TV less than a year ago and it already has severe burn-in. Many owners shared the same experiences on the internet / Youtube. Please research this first before you buy.BeamNG drive - can the Ibishu Pessima jump over the gridmap test terrain?LifeHack20122019-07-13 | I used an engine mod to give it some extra horsepower and then changed the gear ratios for a higher top speed of over 500km/h.
Will this car make the jump? Or will it crash... Or... both?
What mod is used? It's the "1780BHP Drag Sleeper '88 Pessima" by AdamB under the repository. I changed the RPM and Torque a bit in the pessima_engine_supercharged_AdamB.jbeam file.BeamNG drive - can the Hirochi SBR4 jump over the gridmap test terrain?LifeHack20122019-07-10 | I chose the Hillclimb - Asphalt (Sequential) model and removed everything to make it as light as possible. Then gave it some extra turbo power by increasing the waste gate pressure and then changed the gear ratios for a higher top speed of over 500km/h.
Will this car make the jump? Or will it crash...Glennis Grace - Run To You - Whitney Houston Tribute concert - AFAS Live - 10-7-2018LifeHack20122018-10-09 | Glennis Grace performing "Run to You" during the Whitney Houston Tribute. "Whitney, a tribute by Glennis Grace". Rachel Marron would be proud ;)flying the hexa deca experimental drone outsideLifeHack20122015-05-30 | My "hexa deca" drone experiment worked well indoors. It stopped raining so I had to try it outdoors too. It's made from 4 nano drones joined together with tie wraps. They are all "Air Raiders Discovery Drones", 3 of them are "HEMA" rebranded.joining 4 mini drones into one large hexa deca drone, will it fly?LifeHack20122015-05-29 | Today I tried to join 4 mini quadcopter drones into one large 16 rotor blade "hexadeca" drone. Will it fly? Will it crash? After discovering I could control 2 or more mini drones with one remote control, I took three "HEMA nano drones" and one "Air Raiders Discovery Drone" and joined them together MacGyver style, using tie wraps.Outdoor flying the 16 Euro HEMA mini quad drone, same as Air Raiders Discovery DroneLifeHack20122015-05-27 | In this video I'm flying the 16 Euro (or 17,50 US$) HEMA mini quadcopter drone outdoors. As you can see it performs very well outside. It's on sale during 2 weeks of "HEMA op hol" (Hema on the run) and the cheapest I've ever seen. It's roughly the same size as the Hubsan Q4 nano quadcopter or the Cheerson CX10. The model is exactly the same as the "Air Raiders Discovery Drone". It has a very effective rotor blade guard to protect the 3-leaf rotor blades. In the video I'll fly it outdoors and test the 360 degrees flip button.
HEMA is an international retail organisation with stores in the Netherlands, Belgium, Luxemburg, France, Germany, Spain and the United Kingdom. Customer-friendly and with a unique profile, HEMA distinguishes itself from other retailers by selling its own brand. In addition, HEMA develops its own assortment and likes to surprise customers with timely offers of products for daily use. HEMA products are typically convenient, practical and attractive and of good quality.16 Euro HEMA nano drone, bargain or waste of money? Unboxing, flying, crashingLifeHack20122015-05-26 | In this video I'm unboxing the 16 Euro (or 17,50 US$) HEMA mini drone. It's on sale during 2 weeks of "HEMA op hol" (Hema on the run) and the cheapest I've ever seen. It's roughly the same size as the Hubsan Q4 nano quadcopter or the Cheerson CX10. The model is exactly the same as the "Air Raiders Discovery Drone", except for the box it came in. It has a very effective rotor blade guard to protect the 3-leaf rotor blades. In the video I'll unbox it, see what's under the hood, throw it into a concrete wall, fly and crash it and test the 360 degrees flip mode button. HEMA is an international retail organisation with stores in the Netherlands, Belgium, Luxemburg, France, Germany, Spain and the United Kingdom. Customer-friendly and with a unique profile, HEMA distinguishes itself from other retailers by selling its own brand. In addition, HEMA develops its own assortment and likes to surprise customers with timely offers of products for daily use. HEMA products are typically convenient, practical and attractive and of good quality.Worlds smallest RC Nano Quad Drone unboxing, flying and crashingLifeHack20122015-05-19 | This is my unboxing and "flying" video for the Revell Nano Quad quadcopter drone. The Revell is a rebrand of the Estes Proto X / Syncro X, also sold as the Hubsan Q4 H111, the WLtoys V272, V282 and V292 and the Cheerson CX11. It comes with a remote control, USB charginge cable, a spare set of rotor blades and a manual. AAA batteries for the remote control are not included. It seems quite sturdy and well built for such a small and affordable drone and it survived many rookie crashes. Parts are easy to find at online webshops. The partnumber for the Revell spare rotor blade set is 43968, the Hubsan Q4 rotor blade set part number is "H111-05" and for the Estes Proto X the spare part number is "ESTE4615". The rotor blades for other Nano Quadcopters like the Cheerson CX10, JXD 395 / 392, Lian Sheng LS111, JJRC JJ820, Nihui u207 should fit too. The Revell is a bit difficult to fly but I had great fun trying and after trimming it with the buttons on the rc control, I can now fly and land it where I want. The drone comes with one set of 4 spare rotors but they are very popular worldwide so extra spare parts are easy to find online at DX or AliExpress. They also sell "blade guards" to protect the rotor blades from being damaged, extra 100mAh LiPo (Lithium) batteries, chargers, motors, covers in different colors and other parts. Where else do you get so many hours of fun for just 30 Dollars? :) I ordered a JJRC and a Cheerson CX10 quadcopter at DX.com too, to compare to the Revell. This video was shot in 4k resolution by my Panasonic LX100.Can you solve this puzzle? Nine dots, four lines challengeLifeHack20122015-03-23 | Can you solve this 9 dot puzzle? Can you go through all the 9 dots using only 4 straight lines? What is your solution? Can it be done? Are you such a genius? Draw 9 dots on a piece of paper and try for yourself!Can you solve this? 5 room puzzle challengeLifeHack20122015-03-22 | Can you solve this 5 room puzzle? Or is it impossible? Draw a continuous line through every door of this 5 room appartment. Every door must be used but may only be used once. The line you draw may not intersect at any point. Want to try for yourself? Download a free template at: http://picadump.com/5_door_room/5_door_room.pngA mink stole our fishLifeHack20122014-11-11 | While we were taking pictures of a red gurnard we caught on our fishing trip in Norway, a mink took our fish! We were about to put it back in the water when this cheeky animal nicked it. These clever critters must be one of the sole species with a criminal history? It was the catch of the day for this mink...forever spinning fanLifeHack20122014-08-13 | For this fun project I used a 12cm fan, 7 neodymium magnets and a kidney shaped neodymium magnet from a harddrive. It's the same size I used for my energy generating coil devices. This video is a fake, it's inspired on many other "perpetuum mobile" videos on YT and I wanted to try if I could do it too. So don't take it too seriously. Can you tell how I did it? Let me know in the comments! :)how to power mod your electric bug zapperLifeHack20122014-08-08 | Do insects laugh at your bug zapper? Take back control, hack that electronic bugzapper and unleash it's full power! After this mod the increased power will let you will vaporize every insect with just one push on the button.free energy coil powering LED, lamp and motorsLifeHack20122014-08-07 | In this video I demonstrate my easy to build free energy coil device on a lamp, a LED, 2 motors and a fan. The device is made of copper wire and 2 very strong neodymium magnets from a harddrive. Not sure what powers it. Radiant energy?how to make a free energy device, cheap and easyLifeHack20122014-08-06 | Build your own free energy device howto video. Easy to make! The energy coil is made of 2 rare earth magnets, salvaged from an old harddrive. They are very strong. Select HD 1080p to watch this video in full detail. Recorded with my Nikon D5300.free energy generator powering an RC-carLifeHack20122014-08-04 | My free energy generator coil attached to a remote controlled car. Will it have enough power to make it drive? The energy coil is made of 2 rare earth magnets, salvaged from an old harddrive. They are very strong. Select HD 1080p to watch this video in full detail. Recorded with my Nikon D5300.Charge a phone using lemons? Hoax or real? Watch!LifeHack20122014-08-01 | Can you really charge a smartphone using a lemon battery? Someone on YouTube claimed it's possible. Confirmed or debunked?CCFL on a 9 Volt battery at 600 Volt output. Schematic diagram in descriptionLifeHack20122013-03-07 | My "run a CCFL on 1 battery and a 2 transistor inverter" experiment was a success! For this project, I used one inverter transformer and a CCFL (cold-cathode fluorescent lamp) from an old LCD monitor. The 2 transistors are NPN, type BD737 from a (very old) old cassette player. The 2 resistors are 82 Ohm (grey-red-black) and 1/4th Watt. I think almost any NPN transistor in this package should do the job. It has a BCE pin-out. On a full 9 volt battery, I got around 600-750Volt but the battery was draining fast. For the schematic diagram I used this one: http://www.eleccircuit.com/wp-content/uploads/2007/06/micro-inverter-by-2n5121.jpgfree energy device video compilationLifeHack20122012-11-21 | Working demo of my 3 solid state free energy generators. They are based on a coil, made from copper installation wire, and 1 or 2 kidney shaped neodymium magnets. The devices are demonstrated with 2 motors, one motor outside, a multimeter and a 12 volt / 5 Watt festoon lamp. The schematic diagram can be found in 2 other videos in this channel.free energy device tested on light bulbLifeHack20122012-11-18 | My improved free energy generator demonstrated on a 12Volt / 5 Watt festoon car light bulb. Combined with 2 neodymium magnets, it has enough power to light it up. That's great stuff! The first model of my solid state energy device had only one magnet and it wouldn't give enough power to light it up like this. It worked great on small motors and LED's though, they don't need as much energy. The second kidney shaped magnet is turned 180 degrees around, opposing the other magnet. It's made of 2 very strong neodymium magnets and a home made coil. The magnet comes from an old harddrive. These are véry strong and easy to get!Sinclair ZX81 - my unbuilt DIY kit (Timex 1000)LifeHack20122012-11-16 | My unbuilt Sinclair ZX81 diy kit! A collectors item! The ZX81, released in a slightly modified form in the United States as the Timex Sinclair 1000, was a home computer produced by Sinclair Research and manufactured in Scotland by Timex Corporation. It was launched in the United Kingdom in March 1981 as the successor to Sinclair's ZX80 and was designed to be a low-cost introduction to home computing for the general public. It was hugely successful and more than 1.5 million units were sold before it was eventually discontinued. The ZX81 found commercial success in many other countries, notably the United States, where Timex manufactured and distributed it under licence and enjoyed a substantial but brief boom in sales. Timex later produced its own versions of the ZX81 for the US market -- the Timex Sinclair 1000 and Timex Sinclair 1500. Unauthorised clones of the ZX81 were produced in a number of countries.
The ZX81 was designed to be small, simple, and above all cheap, using as few components as possible to keep the cost down. Video output was to a television set rather than a dedicated monitor. Programs and data were loaded and saved onto audio tape cassettes. It had only four silicon chips on board and a mere 1 kB of memory. The machine had no moving parts -- not even a power switch -- and used a touch-sensitive membrane keyboard for manual input. The ZX81's limitations prompted the emergence of a flourishing market in third-party peripherals to improve its capabilities. Such limitations, however, achieved Sinclair's objective of keeping the cost of the machine as low as possible. Its distinctive design brought its designer, Rick Dickinson, a Design Council award.
The ZX81 could be bought by mail order in kit form or pre-assembled. In what was then a major innovation, it was the first cheap mass-market home computer that could be bought from high street stores, led by W.H. Smith and soon many other retailers. The ZX81 marked the first time that computing in Britain became an activity for the general public, rather than the preserve of businesspeople and electronics hobbyists. It inspired the creation of a huge community of enthusiasts, some of whom founded their own businesses producing software and hardware for the ZX81. Many went on to play a major role in the British computer industry in later years. The ZX81's commercial success made Sinclair Research one of Britain's leading computer manufacturers and earned a fortune and an eventual knighthood for the company's founder, Sir Clive Sinclair.
source: http://en.wikipedia.org/wiki/Sinclair_ZX81solid state free energy generator schematics diagramLifeHack20122012-11-14 | This is the schematics diagram of my second solid state free energy device, so you can replicate this device more easily. The coils are made of copper installation wire. It's base is a strong neodymium magnet and a self wound coil. The magnet was salvaged from an old harddisk - these are véry strong and easy to find! I tried round earth magnets (18mm Ø and 2mm thick) from eBay but they don't seem to work. Maybe the shape to create the magnetic field isn't right? I think it's not a perpetuum mobile, the power has to come frome an external source. Maybe zero point?free energy device schematics diagramLifeHack20122012-11-14 | In this video I show you the schematics diagram of my first free energy generator. I decided to draw one because many people asked for it. With this diagram it should be easy to replicate. The coil is made of copper installation wire. The magnet is a kidney shaped neodymium magnet.lenz effect of magnet on aluminum experimentLifeHack20122012-11-13 | Delayed Lenz effect demonstrated with a neodymium magnet on an aluminum bar. In 1835 Heinrich Lenz stated the law that now bears his name. An electric current induced by a changing magnetic field will flow such that it will create its own magnetic field that opposes the magnetic field that created it. These opposing fields occupying the same space at the same time result in a pair of forces. These forces are felt when you turn a generator and generate electricity. The more current you generate, the greater the force opposing you. This force can also be felt if you try to drag a conductive, non-magnetic plate between the poles of a horseshoe magnet. The plate sees a changing magnetic field which creates a current in the plate, which creates its own magnetic field opposing the one that created it.
This video was shot with my "Samsung Galaxy Note" in HD 1080p.neodymium magnet in copper pipe experimentLifeHack20122012-11-13 | Is it magic? A magnet slowing down falling through a copper pipe may look like science fiction but is actually science. It's the delayed Lenz effect of a neodymium magnet in a 28mm Ø copper pipe, causing "Eddy current". When a magnet moves near a conductor, electrical currents can be produced in the conductor. When currents circulate in a piece of bulk material, rather than a wire that forms a complete circuit, the currents are called eddy currents. These eddy currents are more like water swirling in a tide pool rather than flowing in a stream. Eddy currents can reduce the efficiency of electrical devices, such as transformers, because the circulating current results in a loss of power. Eddy currents have several uses, which include magnetic damping of sensitive meters, and they are used in magnetic braking for rapid transit trains. This project explores an aspect of eddy currents called Lenz's law. source: http://www.education.com/science-fair/article/copper-magnetic-affect-falling-magnetsolenoid motor is easy to build from scrap partsLifeHack20122012-11-06 | A working solenoid motor, made from scrap parts. This video was shot with my "Samsung Galaxy Note" in HD 1080p.neodymium magnets for free - how to - very strong!LifeHack20122012-11-05 | In this tutorial video I show you how to salvage super strong neodymium ("rare earth") magnets from old harddrives for free. They are extremely strong and can be used for many different applications, like "electric motors", "perpetuum mobiles", "free energy generators" and other great experiments. Or just use them as a fridge magnet to hold your notes. This video was shot with my "Samsung Galaxy Note" in HD 1080p.How to install an AMD CPU and cooler tutorialLifeHack20122012-10-28 | In this tutorial I show you how to install an AMD CPU (FM1, FM2, AM3, AM3+) and boxed cooler on a mainboard. Always make sure there is thermal grease on either the CPU or the cooler. If not, apply it before you assemble your computer! Don't use too much, just a "pea sized" portion on the middle of the CPU; it will spread when you place the cooler. You can also spread it yourself with an old creditcard. There are videos to show you how; in doubt, first watch a video about applying thermal grease and/or paste. This video was shot with my "Samsung Galaxy Note" in HD 1080p.how to terminate a CAT5e cable with a RJ45 connectorLifeHack20122012-10-08 | In this tutorial I show you how to put a RJ45 connector on an UTP cable. This video was shot with my "Samsung Galaxy Note" in HD 1080p.elektrische vliegenmepper opvoerenLifeHack20122012-10-08 | Eenvoudige handleiding hoe je je elektrische vliegenzapper kan opvoeren!
This video was shot with my "Samsung Galaxy Note" in HD 1080p.power mod your Electronic Bug Zapper Racket howtoLifeHack20122012-10-08 | This tutorial shows how to power mod your Electronic Bug Zapper Racket by removing one resistor. Easy hack! Kill even bigger bugs and flies by supercharging your zapper!
This video was shot with my "Samsung Galaxy Note" in HD 1080p.Lenz effect - magnet on an aluminum bar - demonstrationLifeHack20122012-09-07 | Lenz effect demonstrated with a neodymium magnet on an aluminum bar. In 1835 Heinrich Lenz stated the law that now bears his name. An electric current induced by a changing magnetic field will flow such that it will create its own magnetic field that opposes the magnetic field that created it. These opposing fields occupying the same space at the same time result in a pair of forces. These forces are felt when you turn a generator and generate electricity. The more current you generate, the greater the force opposing you. This force can also be felt if you try to drag a conductive, non-magnetic plate between the poles of a horseshoe magnet. The plate sees a changing magnetic field which creates a current in the plate, which creates its own magnetic field opposing the one that created it.
This video was shot with my "Samsung Galaxy Note" in HD 1080p.how to get neodymium magnets for freeLifeHack20122012-09-05 | In this tutorial video I show you how to salvage free neodymium magnets from an old harddrive. They are kidney-shaped, nickel plated, very strong and great for experiments or as a fridge magnet.free energy generating coil - zooming in on the partsLifeHack20122012-09-04 | This is a free solid state energy generator, demonstrated by me on a remote location. This video was shot at: 53.322062,6.206194 (insert in Google Maps), september 1th, 2012. I edited the last video down to a shorter one and zoomed in on the parts and details so it's easier to replicate for the viewers who like to build this machine for themselves. You see a handwound coil, a neodymium magnet from a harddrive, a multi-meter set at 0-20 Volt DC and a 9 Volt battery to test the motor. The magnet is glued to the coil at approx 4mm distance. I don't think it's a perpetuum mobile, the power has to come frome an external source. Maybe zero point? Voltage is stable, even under load, that's promising!world simplest electric motor - easy to build!LifeHack20122012-08-18 | This motor is made of 1 battery, 10 inch of copper wire and a neodymium magnet.
It works similar to the 150-year old electric homopolar motor invented by Michael Faraday, and works by the principle of the Lorentz force, discovered after Faraday died.solenoid engine - made from scrap partsLifeHack20122012-08-18 | In this video I show you my "single solenoid motor", made from scrap parts. The flyingwheel is from a cassettedeck and the solenoid from an old VCR. On the back of the flyingwheel I glued a neodymium magnet that passes a "reed switch". When the reed switch closes, the solenoid gets powered and gives the wheel enough inertia to spin another round.
The capacitor (1000mF) is to keep the solenoid powered for a little longer, because the reed switch falls off too quickly.
It looks and sounds a bit like an old "steam engine" from the past. This is not a "perpetuum mobile" or any kind of "free energy device". It is powered by the 9 Volt battery and won't work without external power.simple LED flasher - partlist and schematic includedLifeHack20122012-08-14 | In this video I show you my "2 LED flasher". It's based on a "astable multivibrator" schematic with 2 NPN transistors. The schematic and partlist can be found at the end of the video.Joules thief and how to run a LED on a depleted batteryLifeHack20122012-08-12 | A "joules thief" can power a LED from an almost depleted battery. A joules thief squeezes the last remaining energy out an almost empty battery, even if only 0.3 Volts is left. The schematics diagram is at the end of the video. I got the parts from an old cassette-recorder but it shouldn't cost more than 1$ if you buy the parts in an electronics shop. The parts needed are: 1x LED, any color you like 1x NPN transistor 1x 1kOhm resistor (brown / black / red coding) 1x ferrite toroid (round) 1x copper electrical wire 1x almost depleted battery
Explanation from the Wikipedia site: "Joule thief" is a nickname for a minimalist self-oscillating voltage booster that is small, low-cost, and easy-to-build; typically used for driving light loads. It can use nearly all of the energy in a single-cell electric battery, even far below the voltage where other circuits consider the battery fully discharged (or "dead"). Hence the name suggests the notion that the circuit is stealing energy or "Joules" from the source. The term is a pun on the expression "jewel thief", one who steals jewelry or gemstones.
The circuit uses the self-oscillating properties of the blocking oscillator, to form an unregulated voltage boost converter. As with all power conversion technology, no energy is actually created by the circuit. Instead, the output voltage is increased at the expense of higher current draw on the input. As a result, the amount of power entering the circuit is the same as the amount leaving, minus the losses in the conversion process.
For more information, take a look at the Wiki yourself: http://en.wikipedia.org/wiki/Joule_thiefrun a 220 Volt light bulb on a 9 Volt battery - win or fail?LifeHack20122012-08-12 | My "run a energy safing bulb on 1 battery and a 2 transistor inverter" experiment was a bit of a failure. It did blink but I guess 9 Volt wasn't enough to make it work.
For this project, I used one inverter transformer and a CCFL (cold-cathode fluorescent lamp) from an old LCD monitor.
The 2 transistors are NPN, type BD737 from a (very old) old cassette player. The 2 resistors are 82 Ohm (grey-red-black) and 1/4th Watt. I think almost any NPN transistor in this package should do the job. It has a BCE pin-out.
On a full 9 volt battery, I got around 750Volt but the battery was draining fast.
For the schematic diagram I used this one: http://www.eleccircuit.com/wp-content/uploads/2007/06/micro-inverter-by-2n5121.jpgastable multivibrator - make 2 leds blink in sequence - easy to build!LifeHack20122012-08-11 | In this video I show you my astable multivibrator with leds. I used the schematic diagram from: http://circuitalley.phpnet.us/circuit8.html The got the parts from a junk cassette-recorder. I had the LED's left over from another experiment, you can use LED's with other colors if you like. The parts are: 2 NPN transistors, 2 capacitors 100mF/16Volt (use smaller caps for faster blinking), 2x 33kOhm resistor (orange, orange, orange) and 2x 2.2kOhm resistor (red, red, red). And don't forget to hook it up to a battery :)turn an electric motor into a generatorLifeHack20122012-08-04 | You can turn an electric motor into a generator to generate power, as this video proofs. The battery powers the first motor, it is connected mechanically to the second engine. When the first motor starts spinning, the second motor produces enough electricity to power the LED and another motor.
These are the same motors I used for my free energy generator.free energy generator with partlist included 100% free designLifeHack20122012-05-02 | This is my diy "free energy generator". It's easy to build yourself. Please give me feedback if you improve it, so I can create a better version and a new video! It's base is a strong neodymium magnet and a home made coil. The magnet comes from an old harddrive - these are véry strong and easy to get!Free energy generator, easy to build, 100% free designLifeHack20122012-04-29 | This free energy generating device is easy to replicate for just under 5$. I was playing around with a dyi neodymium magnet motor and felt an "electric tickle", everytime the neodymium magnet got close to the coil. So I asked myself: can I power anything with it? I tried a LED and that burned up after a few seconds so I tried it with small 2 engines from an old walkman, connected together. This setup has been running for 2 weeks now and I still don't understand the working of it. I know that a perpetuum mobile would violate the first law of thermodynamics and/or the second law of thermodynamics so it has to gain it's energy from somewhere. Is it zero point? Could anyone please explain? I'm lost...
This video was shot with my Samsung Galaxy Note in HD 1080p quality.