Name: Crystal Star Cells And The Cells Made From Pennies @Energenx
Uploaded: 2024-10-23T08:17:00-05:00
Duration: 8 min 17 s
Description: Crystal Star Cells And The Cells Made From Pennies

Crystal Star Cells And The Cells Made From Pennies

Energenx 2024-10-23 | Crystal Star Cells And The Cells Made From Pennies

Linear Regulator Amp, Audio

Energenx 2014-04-28 | The Linear Amplifiers used in this device are no longer in production as we had to do them discreetly in the beginning. The Solar Tracker 5 is just one of the many offshoots of the technology in amplifiers.
Technology has advanced in how current feedback works in this type of device works
The Video shows that with the correct arrangement with linear current amplifiers many things are possible as the circuits may be used for a verity of different applications. Using this for solar charging was an idea I had for a very long time. I applied this technology with variations in the Solar Tracker 5 because of the stability in a single ended mode. The feedback of the circuit looks at the impedance of the batteries and then regulates to the proper voltage. In the amplifier the feedback is used to control the gain of the current being modulated. Meter indications in VU are showing the current being modulated within the regulator circuits and that current indicates how loud the amplifier is playing. Clipping level is far above the red indication of the meters that being 3 dB above full power. If the Linear current amplifier exceeds heat levels automatic shutdown will occur and current levels fall automatically to protect the device (thermal shutdown).
John Bedini Bedini Amplifiers
April 28-14 Copyright John Bedini

Linear Amp Control SSG / School Girl Motor

Energenx 2014-04-21 | DescriptionIn this video I show a linear Current Amplifier hooked to a SSG machine. I explain some of the operation but not all of it because of time limits. The Linear amp combines a filter section for converting the spiked high voltage and then transforming the DC through a Bata multiplier filter controlled buy a zener to limit the DC voltage to the input stage of the linear Ampilifier circuit. The comparator circuits indicate the state of the battery when battery approaches top of curve.
Tesla Solar Charger/Energenx
John Bedini

Tesla solar tracker 5 marine rv 3amp

Energenx 2014-04-11 | Tesla Solar Tracker 3 Amp RV Camping charger.
John Bedini Chuck Hupp
4-11-14
In this video Chuck and I are showing the new 3amp tracker 5 RV/ Marine charger. The chargers are usually used for emergency power and camping. With small solar panels, the fold up type as Goal Zero builds for backup solar generators.

Tesla solar tracker 5 160 Amp Charger

Energenx 2014-01-22 | Tesla Solar Tracker 5 160 Amp 24 volt Charger.

Bike Wheel Kit Preview

Energenx 2012-10-29 | Initial preview of the Bedini SG Bike Wheel Kit including a 3 hours performance test performed by John Bedini, Tom Childs, John Koorn and Erik Nissen.

The SG Energizer Cap Dump John Bedini & Chuck Hupp

Energenx 2012-10-22 | In this video I'm showing the original SG Monopole Energizer.
Just giving some tips for the group in what to look for.
This is discussed on the Energy Science Forum at:
www.energyscienceforum.com

Update On Lead Zinc Alum Cells

Energenx 2012-10-10 | In this update video I'm showing where the energy is coming from with this type of system.
John Bedini & Chuck Hupp.

Lead Zinc Alum Battery John Bedini & Chuck Hupp..

Energenx 2012-10-09 | Lead Zinc Alum Battery Test
www.energyscienceforum.com
John Bedini & Chuck Hupp

Mixing Chemicals for Hydrate Cell 9 John Bedin &i Chuck Hupp

Energenx 2012-10-06 | In this video I'm showing how I mixed the chemicals for the Lead Hydrate 9 battery, I made one mistake about the standing voltage so I corrected it. Important to not let your meter's battery run out. Most Alum Batteries stand between 9.3 to 11.34 volts. @.1 Ohms
John Bedini & Chuck Hupp.

Update On Hydrate Cell

Energenx 2012-10-04 | Just an update where this cell is acting like a crystal battery
John Bedini & Chuck Hupp

How The Alum Battery Works5 John And Chuck.

Energenx 2012-10-03 | In this video Chuck and I are showing what to expect from the crystal battery. In the latter half of the video you can see what the microscope sees. The last shots are of how the crystal grows and next two show how the sulfate attacks the lead, you want to avoid that. You can see all this at: http://www.energyscienceforum.com/forum.php
John Bedini

Hydrate Lead Acid Switching-1

Energenx 2012-09-30 | In this video I'm showing that if the hydrate is correct and is functioning properly.
The normal Sulfuric Acid in the cell will lock up in the chemical creating a new synthetic material that is capable of switching with electric current.

John Bedini

How To Build It A Lead Alum Hydrate Battery John Bedini

Energenx 2012-09-19 | In This Video I take you through Building the Lead Crystal Alum Hydrate Battery. I show three of the cells That we built here at Energenx. All the information is on the Energy Science Forum At: http://www.energyscienceforum.com under Crystal Batteries. Tesla Chargers at Energenx .com/ www.energenx.com
Thank You John Bedini.

4 Plate Crystal Lead Alum Hydrate Cell

Energenx 2012-09-19 | In this video I'm showing a 4 plate Lead Crystal Cell made from an Everstart Wal-Mart Battery, I found that it depends on the number of plates and the surface area of the lead Alum Crystal. I used a pre- manufactured plate system and its case. I have Charted these batteries for two days. John Bedini

New SSG Energizer.

Energenx 2012-09-14 | This is the new SG Energizer Chuck and I will be assembling it in a YouTube video and winding the coils to show you how. All this is discussed at the Energy Science Forum at: http://www.energyscienceforum.com/forum.php
John Bedini

Two Plate Alum Battery Made From Junk Gel Cell 1.5

Energenx 2012-09-14 | In this video I show a two plate lead Alum cell made from a junk Gel Cell using a Gelled Alum mixture developed at Energenx.
Then I show when the curve dropped to small level output of about .9 volts a rapid charging with a miniature Tesla Switch developed for low light appellations of less than 2 Amps. Panel voltage is .95 amps. All this can be foune on the Energy Science Forum At :http://www.energyscienceforum.com/forum.php
John Bedini

New Alum Battery Test2 John Bedini

Energenx 2012-09-13 | In this video I'm going over the Alum battery we have built here with Milpitas plates after it formed at 30Ma all night long. I'm running a curve so you can see what to expect. The chemical formula worked out fine for this application.

John Bedini

Crystal Lead Cell5.1 John Bedini

Energenx 2012-09-11 | In this video I show exactly how I do the crystal cells using old Gel Cells I have developed a way to make an instant crystal and do not need to wait for them to grow from a seed Crystal.
Thanks John Bedini

Alum Crystal Battery Made From Old Gel Cell Battery John Bedini

Energenx 2012-09-07 | In this video Chuck and I took apart a gel lead acid battery to make an Alum Cell the Battery was sitting for 12 years. We did this to prove it works and can be done with old batteries. Again use safety if you do this and wash your hands after you handle it. This discussion is taking place on the Energy Science Forum at: http://www.energyscienceforum.com
Thank you
John Bedini
:

The Alum Battery And The Solar Switch John Bedini

Energenx 2012-09-06 | In this video I'm going over the alum battery and showing a Solar Switch to control Led Lighting. I'm also showing the dis-charge curves and charge curves of converted Lead Acid batteries.This discussion is taking place at the Energy Science Forum at: http://www.energyscienceforum.com
Thank you
John Bedini

Conversion Of A Dry-Charge Lead Acid Battery To an Alum Crystal Cell Battery John Bedini

Energenx 2012-09-05 | In this video I'm showing a Dry Charge Lead Acid Battery which I have taken and converted to an Alum Crystal Battery. I have added no acid at all to do any forming of the plates and I'm using the Solar Tracker to charge it. This is the way I do it you may have other ideas, this discussion is taking place at The Energy Science Forum at: http://www.energyscienceforum.com/forum.php
Thank You John Bedini

How to Make A Lead Alum Crystal Battery

Energenx 2012-09-05 | In this video I'm showing how to make the casted plates for the Lead Alum Crystal battery. I have skipped a part somehow where I'm showing the plates after current had been passing through them to form a coating before I pasted them with Red Lead and Alum. If your going to speed up the process it is advisable to form in sulphuric acid
and the wash the plates in distilled water afterwards. You need to form the two different oxides for this to work correct. I did this fast to show how so I made some mistakes, like loosing a part of the video. I think you get the point here of what can be done. Red Lead you will need to get it from an old storage battery since you just cant run to the hardware store and buy it anymore. The whole discussion is posted on the Energy Science Forum at:http://www.energyscienceforum.com
John Bedini

The Radiant Oscillator 3 John Bedini

Energenx 2012-08-30 | In this video I'm showing after 18 Hrs where the batteries have basically charged to the same levels. I'm showing the impedance difference between the two batteries.The batteries have charged to the capacity. The discussion is at,http://www.energyscienceforum.com/. for any questions please visit the forum. the input power was 18 AmpHrs or 1 amp for 18 Hrs. The combined total of the two batteries is 30 Amp Hrs
John Bedini

The Workings Of The SG Oscillator

Energenx 2012-08-30 | In this video I'm showing again after one hour the two batteries, the one battery was pretty much charged the other was dead, in the beginning video they start out close to being the same. Now as the one battery approaches full charge the current goes down and the other is building current.So one impedance is low and the other is high to the oscillator. As the battery approaches it's charge at 14.85 the other battery receives more charge but in the end they will both be balanced at 14.8 volts. This is all discussed on the Energy Science Forum at, http://www.energyscienceforum.com/ under The SG Oscillator This does apply to the motors.
John Bedini

SG Solar Oscillators John Bedini

Energenx 2012-08-29 | In this video I'm showing what can be done with al the SG oscillators, what the Patent talked about was charging a battery by means from a Solar Panel. However what the patent office disallowed was the use of branch currents. So one source is capable of charging multiple batteries from one source battery or Solar Panel, this applies to all my machines if the impedance is figured out on the batteries. The discussion is in the Energy Science Forum at, http://www.energyscienceforum.com If you have two batteries, identical in all respects, and you charge them as a parallel pair, then each will get half of the current from the solar panel or oscillator. Each will get the full voltage. HOWEVER, as your batteries will never be identical, it is not a good idea to simply parallel them. The Radiant Charge acts a little different because it sees each batteries impedance as one circuit in this arrangement and so the batteries are split and on one oscillator circuit each.. US Patent 7,990,110
John Bedini

Radiant SG Oscillator Tube John Bedini

Energenx 2012-08-23 | In this Video I'm showing the Radiant SG Oscillator discussion is located here .http://www.energyscienceforum.com The oscillator was developed by me by inside a M515024 Transistor. The Oscillator is discussed in Patent # US 7,990,110. The original oscillator was developed for solar charging in very low light.
Thanks for watching
John Bedini

ZERO FORCE MOTOR John Bedini

Energenx 2012-08-23 | In this Video I'm showing a "ZERO FORCE MOTOR" The motor works opposite the normal SG or DC motor. No Back EMF is developed in the motor, so it does not generate anything. The discussion will take place in the Energysciencefourm. here .http://www.energyscienceforum.com The motor was built by Peter Lindermann from one of my early models.I will not be posting anywhere else but on the new forum. The Forum is dedicated to the people that worked so hard on the SG groups.
Thanks for watching
John Bedini

New Crystal Batteries20 John Bedini and Chuck Hupp

Energenx 2012-08-17 | In This video I'm showing some new things Chuck and I have been working on. First I show the Crystal Batteries that were used during the convention and what they will run after being dried out. The oscillators are based on US patent 7,990,110 this also covers the Cable oscillator and battery charging. The conversion process for a lead battery Chuck and I are not ready to disclose the mixture just yet. This is all discussed on Energysciencefourm located at http://www.energyscienceforum.com This is my home and I will not be posting anything on the other forums. You are welcome to join.
John Bedini

Converted AGM battery John Bedini

Energenx 2012-08-17 | In this video I show a converted AGM battery that is now converted to a flooded lead acid battery. This battery was not useable until now. The process was talked about on the Energyscience forum, Here, http://www.energyscienceforum.com
This Forum is my home and it deals with everything I have done in the energy field, I will not be posting on any other forums. I hope to have others join in with other technologies.
John Bedini

Lead Acid Conversion Alum Battery Virgin Never Formed Part3.wmv

Energenx 2012-03-06 | In this video I show how we have taken a 1951 Willard Battery and formed it to work on Alum
electrolyte and some of the tricks to do this, I show that it does not suffer the same problem of deep discharge as I take this battery down to .5 volts. Happy to share this information with
everybody.
John B

Lead Acid Conversion Alum Battery Virgin Never Formed Part 2.wmv

Energenx 2012-03-05 | In this video I show how we have taken a 1951 Willard Battery and formed it to work on Alum
electrolyte and some of the tricks to do this, I show that it does not suffer the same problem of deep discharge as I take this battery down to .5 volts. Happy to share this information with
everybody.
John B

Lead Acid Conversion Alum Battery Virgin Part 1.wmv

Lead Acid Alum Battery Conversion Part2.wmv

Energenx 2012-03-01 | Alum Battery Conversion Part 2,
This is a converted Ford Mustang Battery 590 cold cranking amps that is about 30 Amp Hr battery. Testing on a battery that was junk. but no shorted cells. You make up your own mind if you want to do this experiment.
John B

Lead Acid Alum Battery Conversion Part1.wmv

Energenx 2012-03-01 | Alum Battery Conversion Part1and Part 2,
The is a converted Ford Mustang battery 590 cold cranking amps that is about 30 Amp Hr battery. Testing on a battery that was junk. but no shorted cells. You make up your own mind if you want to do this experiment.
John B

My Crystal Cell Depolarizer

Energenx 2012-02-15 | In this video I show the process of making My Crystal Cell that is using water and how the
mixture is changed to a paste and the Depolarizer is added to the mix. Also showing the baking process and then the electrical testing of the cell. First the cell is tested dry to show that no power is developed and then the cell is tested with the use of water to allow Ion transfer. The next point is that the Hydrogen is collected by the Mn2O3 and the cell becomes very stable. After drying you just add water.
John Bedini.

Iiron Pyrite fused to copper electrode.wmv

Energenx 2012-02-10 | In this video I'm showing a way to make a fused electrode. I'm fusing Iron pyrite to the copper electrode this forms an oxide of Iron combined with copper oxide forming a high stressed crystal as one of the electrodes, thanks for watching even if I ended the movie short
John B

How to build My Cell, Dry Mix.wmv

Energenx 2012-02-08 | Here is a video of how did this cell in a dry state ready to use just by adding water. The mixes you already have. The crystal material is in a screen with paper on the outside.
John Bedini

Some Things To Think About John And Chuck.wmv

Energenx 2012-02-03 | Some Things To Think About.
In this Video I go over Crystal cells that have been running continuous since Chuck and I made them. After talking To Lidmotor I said I would post this video on some of the cells we have made here and continue to run day in and day out. Do not get discouraged in your efforts to produce a cell that will give you light and run things even if it is small. Crystal Cells running 25 Ma to 50 Ma for just a drop of water is a leap forward and as the material that makes this possible is developed into just a very thin slice the power will go up. Thanks to everybody on the Energetic Forum in Bedini Earth Light.
Chuck Hupp and John Bedini

Smaller Heptahydrate Hydrate cell 2.5 X 2 inch Chuck And John.wmv

Energenx 2012-02-02 | In this smaller cell we saw that the material did not collect the same amount of water from the air. The mixture is experimental and is dark compared to the hydrates. The same mixture with that we have gave before but black Tourmaline was crushed and added to the mix. The cell performed right out of the box. As the day has gone by the moisture content increased, but we did add some water to start the process . We also fired the copper to form the oxide semiconductor surface. Again this cell originally inspired by Ibpointlass2. The cell was built by Chuck Hupp and John Bedini.

Big Heptahydrate Hydrate Cells Chuck And John.wmv

Energenx 2012-02-01 | In this video I'm showing the biggest of the hydrate cells. These Cells are combined Hydrates and mixed with Iron Pirate and Magnesium grains. As the video shows that the Hydrate material can pull the moisture right out of the air. The cell in this video is capable of over 200Ma under dead short circuit current. During the pressing process the cell releases the water from within the crystals and the cell shorts itself out. All Crystal Cells contain water locked up within the crystals. The crystal cell uses this locked up water for Ion movement between the electrodes.The Hydrate allows the cell to gather the water from the air and this then rejuvenates the cell. The cells were built by Chuck Hupp and John Bedini, the pressure
process was an idea of Ibpointlass2 on the Energetic Forum, under Bedini Earth Lights.
John Bedini

IBpointlass2 Cell and a Hydrate Crystal Cell.wmv

Energenx 2012-01-31 | In this video we show how to make compression Crystal cell and what to expect by doing it this way. It works good and requires time to build as you need tooling to compress the material in the cell. This is a Ibpointlass2 cell using salt substitute and then in the second cell using a Hydrate compound.
John Bedini

Solid State Polycrystalline Cells / John Bedini

Energenx 2011-09-15 | In this video I'm showing the newer type of mix which now I have turned into a polycrystalline solid state mixture. Under pulse currents it recharges itself for the next pulse. The Led must have a resistor on it to use in steady state.
John Bedini

Solid State Crystal Batteries In Series 2

Energenx 2011-09-14 | In this video I'm showing that it is possible to connect two solid state cells in series. now this is not much power at about 2.53 volts @ 1.3 Ma but it is a good start for Solid State Crystal Batteries. Running clocks would be no problem. I'm shorting cells just like it now to see what happens will be posting a video on this.
John Bedini

Real solid state crystal. John Bedini

Energenx 2011-09-13 | In this video I'm showing a solid state semiconductive crystal that I can just add a piece of copper and I have energy not that much but I have it. It works because it can keep emitting electrons between two different metals. The definition from the book is that it must emit Ion transfer but that is not what you want. Wet electrolyte is going to be galvanic and after the electrolyte is dry your battery will not exist anymore. so it must only move electrons in a dry state.
John Bedini

Series Crystal Rock Battery John Bedini

Energenx 2011-09-12 | In this video Chuck and I drilled a basalt rock with two chambers and built two crystal batteries to see what would happen. Usually when you try to put two earth batteries together it does not work that way as you get the same voltage but crystal cells work different. Anyway we just thought we would share that with everybody.
John Bedini

Making Rock Crystal Battery1 John Bedini

Energenx 2011-09-09 | I show How I made the Crystal Rock Battery1
John Bedini

Rock Crystal Battery John Bedini

Energenx 2011-09-07 | In this video I'm showing that you can do this with a rock.
Just a normal Idaho Rock.
johnB

How To Make A Star Cell CC.John Bedini.wmv

Energenx 2011-09-06 | In this video I show how I make the star cell and test it.
John Bedini

Epsom Salt Crystar Star Cell As A Thermopile For Electricity

Energenx 2011-09-02 | In This Video I'm Showing a Epsom Salt Star Crystal Cell It is what I have thought all along that the crystal could be excited by ambient heat. This then adds a factor to the John Hutchinson cells as collecting ambient heat in the surrounding area . This now explains the whole cell operation. The Rochelle Salts act as an piezoelectric generator. As the Epsom Salts expand this causes stress on the Rachelle Salts to emit electrical charge. Since the two salts re different along with the metals you get a battery effect. as the cell moves from one tempetiture to another the voltage and output changes. As I have said before the Casmir effect has nothing to do with this as it is to small in energy to be of any use here.

Under these conditions it would take many cells to get enough energy to power a 1/2 amp load but it could be done. You must understand all the chemicals your mixing together to do the correct designing. This Cell basically works as a Thermopile this has a really good efficiency for what it is. This is something you would never learn in school, they would never teach this. The basic thing here is you can find ways to trick nature into giving up it's hidden energy.
John B

Epsom Salts Crystal Star Cell 2

Energenx 2011-09-02 | Epsom Salts Crystal Cell

In this video I'm showing the standing voltage about 1.6 volts. Then I use a butane lighter and just heat it a little as you can see, the voltage starts to climb up. This would excite the Crystal Lattice into electron movement, could also be Ions but I do not think so at this time, no moisture. The crystal however is one solid melted crystal. We will put the cell out in the cold tomorrow and produce another video for youtube. Next I will figure out a doping to the Epsom Salts to see if I can increase the power. The cell impedance at this time is about 100 Ohms I want to try and get it way down.
John B