arevamirpalTEPCO started removing fuel assemblies stored in Reactor 4 Spent Fuel Pool on November 18, 2013. 4 unused (new) assemblies containing about 60 fuel rods each were removed to the cask by 6:45PM.
The work continues on November 19, 2013, and TEPCO hopes to load the cask with 22 unused (new) fuel assemblies before the cask is lowered by the gantry crane to the ground.
Removal of fuel assemblies in SFP4 is to continue for a year.
Transfer of Fuel Assemblies to the Cask inside Reactor 4 SFP at Fukushima I NPP (11/18/2013)arevamirpal2013-11-19 | TEPCO started removing fuel assemblies stored in Reactor 4 Spent Fuel Pool on November 18, 2013. 4 unused (new) assemblies containing about 60 fuel rods each were removed to the cask by 6:45PM.
The work continues on November 19, 2013, and TEPCO hopes to load the cask with 22 unused (new) fuel assemblies before the cask is lowered by the gantry crane to the ground.
Removal of fuel assemblies in SFP4 is to continue for a year.
For more coverage of the Fukushima nuclear accident, visit my blogs: www.exskf.com www.exskf-jp.com (Japanese)Fukushima I NPP Reactor 3 Operating Floor (8/11/2014)arevamirpal2014-09-08 | This video was uploaded in TEPCO's Video Archive section (Japanese), not the usual Photos and Videos Library.
It shows the badly-damaged northwest corner of the Reactor 3 operating floor. There is no accompanying document describing the purpose of the survey.
For continued coverage of Fukushima I NPP accident, go to my blog: www.exskf.com (English) www.exskf-jp.com (Japanese)
Follow on Twitter: @exskf (mostly Japanese tweets with occasional English, due to language constraint)Fuel Handling Machine Console Dropped Into Reactor 3 Spent Fuel Poolarevamirpal2014-09-08 | TEPCO has been removing debris from the Fukushima I NPP Reactor 3 Spent Fuel Pool in preparation for the fuel assembly removal.
On August 29, 2014, the remote-controlled crane failed to grasp the 400-kg console of the Fuel Handling Machine and dropped it into the pool. It fell on the protective sheet that covered the spent fuel assemblies (there were two under the sheet).
For continued coverage of Fukushima I NPP accident, go to my blog: www.exskf.com (English) www.exskf-jp.com (Japanese)
Follow on Twitter: @exskf (mostly Japanese tweets with occasional English, due to language constraint)Fukushima I NPP Reactor 3 MSIV Room Leak Foundarevamirpal2014-06-01 | TEPCO inserted the camera below the grating inside the MSIV room of Reactor 3 and found a leak from the expansion joint that connects to MSIV (Main Steam Isolation Valve).
The leak can be seen at about 33 seconds into the video.
For continued coverage of Fukushima I NPP nuclear accident, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I NPP Reactor 3 Operating Floor (1/31/2014)arevamirpal2014-02-18 | Large debris has been mostly cleared from the top operating floor of Reactor 3 at Fukushima I Nuclear Power Plant. Removing the debris from inside the Spent Fuel Pool (seen in the upper right of the operating floor) started in December 2013.
For still photos and TEPCO's analysis of the shield plug condition, go to my blog: http://bit.ly/1jMZj92
www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I NPP: Water Flowing from MSIV Room in Reactor 3 (1/18/2014)arevamirpal2014-01-19 | MSIV = Main Steam Isolation Valve.
A TEPCO worker noticed the water flowing from near the MSIV room on the first floor of Reactor 3 as he was monitoring the video taken by a robot.
Radiation levels in Reactor 3 is markedly higher, not safe for human workers to stay and investigate.
For more coverage of Fukushima nuclear accident, visit my blogs: www.exskf.com www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3 Spent Fuel Pool, 2/16/2013arevamirpal2014-01-01 | One of the videos TEPCO released in February 2013, showing the Spent Fuel Pool of Reactor 3.
For more Fukushima I Nuclear Power Plant accident, visit my blogs: www.exskf.com www.exskf-jp.com (Japanese)Video Taken by Surface Boat in Flooded Torus Room in Reactor 1 at Fukushima I NPParevamirpal2013-11-16 | TEPCO and Hitachi Nuclear Energy used a tethered surface boat lowered from a hole drilled on the 1st floor of Reactor 1 into the torus room in their effort to find where the contaminated water leak from the dry well comes from.
The boat found two leaks on the November 13, 2013 expedition half way around the torus, and none on November 14.
For continued coverage of Fukushima nuclear accident, visit my blogs: www.exskf.com www.exskf-jp.com (Japanese)How Removal of Fuel Assemblies from Fukushima Reactor 4 Spent Fuel Pool Will Be Donearevamirpal2013-11-07 | TEPCO made the video to show how the removal of fuel assemblies (not individual "rods") from the Spent Fuel Pool of Reactor 4 at Fukushima I Nuclear Power Plant.
The removal, starting with unused (new) assemblies, was set to start on November 8, but it has been delayed to conduct a test run of transferring the fuel assemblies to the Common Pool.
For continued coverage of Fukushima I Nuke Plant accident, go to my blogs: www.exskf.com www.exskf-jp.comTank Patrol at Fukushima I Nuke Plantarevamirpal2013-09-09 | TEPCO released the video showing how the patrol of the tank area is done. Three workers walk around the huge tanks in full protective gear and with survey meter to check gamma and beta radiation.
The tanks in the video stores waste water after cesium absorption and desalination by reverse osmosis; the water is extremely high in beta radiation, but not much gamma radiation.
For more about RO (reverse osmosis) waste water leak, please read my posts: http://bit.ly/183EMrf
By the way they are recruiting new workers to do this tank patrol. For details of the job, see my blogpost: http://bit.ly/1avFoaX
For more coverage of Fukushima I Nuke Plant accident, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Inside Reactor 2 Containment Vessel (8/12/2013)arevamirpal2013-08-19 | TEPCO took the video on August 12, 2013 as part of the effort to understand the condition inside the Primary Containment Vessel of Reactor 2. They had planned to insert the camera inside the pedestal through the opening, but stopped short at the opening.
For continued coverage of Fukushima I NPP accident, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Inside Reactor 2 Containment Vessel (8/2/2013) - CRD Railarevamirpal2013-08-05 | TEPCO attempted to insert the camera through the pedestal opening to peek inside the pedestal, but that attempt was a failure this time.
The first video of inside Reactor 2 Containment Vessel in January 2012: http://youtu.be/Y3Vdiwg6c5o (There are also longer versions of the video in my channel.)
For continued coverage of Fukushima nuclear accident, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Steam Rising from Reactor 3 Top Floor, 7/18/2013arevamirpal2013-07-18 | TEPCO says a worker spotted a steam rising from between the reactor well and device storage pit on the operating floor of Reactor 3 on July 18, 2013. The company says it may be rainwater warmed and evaporated on the Containment Vessel head.
For still-ongoing coverage of Fukushima I nuclear accident and related issues in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuclear Power Plant Reactor 1 Torus Room (2/21/2013)arevamirpal2013-02-22 | The water is 4.9-meter deep from the flooded torus room floor in the Reactor 1 basement. TEPCO says visibility is about 60 centimeters. The highest air dose rate inside the torus room was 920 millisieverts/hour.
For more about this inspection that took 20 workers nearly 2 and a half hours manipulating the equipment through a hole on the first floor of Reactor 1 building (2 to 10 millisieverts/hour atmosphere), please see my posts: http://bit.ly/ULQAYu http://bit.ly/W6XusS
For continued coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Fuel Handling Machine Post Drops into Reactor 3 SFParevamirpal2013-02-09 | (UPDATE) There are human workers on the platform that surrounds the building wearing tungsten vests to make sure things go well. For details, see my blog post: http://bit.ly/WSa1Nq
============
with a splash... The equipment to remove debris on Reactor 3 operating floor is operated by remote control, as the radiation level is too high.
For coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima Daiichi Nuclear Power Station Video Tourarevamirpal2013-01-12 | The video was published by TEPCO on December 14, 2012 in English, with images and videos from the start of the nuclear accident in March 2011.
For coverage of Fukushima I Nuke Plant accident and how it has affected Japan and beyond, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Steel Beam in Fukushima Reactor 3 Spent Fuel Pool Successfully Removed (12/20/2012)arevamirpal2012-12-22 | The beam fell into the pool in September when an unmanned vehicle fumbled it. On December 20, TEPCO finally had it removed.
For coverage of Fukushima I nuclear accident and resultant contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: TEPCO Tests Toshibas 4-Legged Robotarevamirpal2012-12-12 | After this clumsy attempt to climb the stairs, the robot was sent to Reactor 2 to investigate the vent pipe. For more on the robot's mission, see my blog post: http://bit.ly/U6glya
For Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Full Length (1/2): Fukushima I Nuke Plant Reactor 1 Operation Floor Survey by Balloon (10/24/2012)arevamirpal2012-10-27 | (This is the first of the full-length (1 hour plus) video of the operation. For the second, http://youtu.be/vZNIOndoJno. For the digest, short version, http://youtu.be/7tCRXl4Tuck)
After an failed attempt in August, workers from Hitachi and TEPCO used a modified balloon to see the operation floor of Reactor 1 on October 24, 2012.
For continued coverage of Fukushima I Nuke Plant accident and radiation contamination, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Full Length (2/2): Fukushima I Nuke Plant Reactor 1 Operation Floor Survey by Balloon (10/24/2012)arevamirpal2012-10-27 | (This is the second of the full-length (1 hour plus) video of the operation. For the first, http://youtu.be/v-5EI5YgD3k. For the digest, short version, http://youtu.be/7tCRXl4Tuck)
After an failed attempt in August, workers from Hitachi and TEPCO used a modified balloon to see the operation floor of Reactor 1 on October 24, 2012.
For continued coverage of Fukushima I Nuke Plant accident and radiation contamination, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 1 Operation Floor Survey by Balloon (10/24/2012)arevamirpal2012-10-27 | After an failed attempt in August, workers from Hitachi and TEPCO used a modified balloon to see the operation floor of Reactor 1 on October 24, 2012.
For continued coverage of Fukushima I Nuke Plant accident and radiation contamination, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Inside Reactor 1 Containment Vessel at Fukushima I Nuke Plant: Water Under Grating (10/11/2012)arevamirpal2012-10-12 | It took 51 workers and 3 hours on October 11, 2012 again to probe the Reactor 1 Containment Vessel at Fukushima I Nuclear Power Plant. This video is an abbreviated version.
TEPCO plans to collect sample water from under the grating inside the CV on October 12, and install thermocouple and water gauge on October 13.
For coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Inside the Containment Vessel of Reactor 1 at Fukushima I Nuke Plant (10/9/2012)arevamirpal2012-10-10 | This is the abbreviated version of the 2-hour video taken on October 9, 2012. Just like the previous video of Reactor 1 CV, it is hazy inside.
For the coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Inside the Reactor 1 Containment Vessel at Fukushima I Nuke Plant (Released 9/27/2012)arevamirpal2012-09-27 | TEPCO released the video on September 27, 2012, with no date as to when the video was taken. They are preparing for more detailed investigation, and as the first step they drilled a hole (opened one of the plugged penetrations) on the Reactor 1 CV.
The aperture opens at about 50 seconds into the video, and the camera enters the CV at about 2 minutes.
For coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Inside the Reactor 3 Spent Fuel Pool at Fukushima I Nuke Plant -2/2 (9/24/2012)arevamirpal2012-09-25 | TEPCO released the videos of the mishap that happened on September 22, 2012, when a piece of steel frame slid into the Reactor 3 Spent Fuel Pool as workers operated cranes by remote control.
To make sure that the fuel assemblies inside the pool were not harmed, TEPCO used the video camera. This video shows the bottom of the pool.
For the coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Inside the Reactor 3 Spent Fuel Pool at Fukushima I Nuke Plant -1/2 (9/24/2012)arevamirpal2012-09-25 | TEPCO released the videos of the mishap that happened on September 22, 2012, when a piece of steel frame slid into the Reactor 3 Spent Fuel Pool as workers operated cranes by remote control.
To make sure that the fuel assemblies inside the pool were not harmed, TEPCO used the video camera. This video shows the top of the fuel assemblies.
For the coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Remote-Control Heavy Equipment Used in Debris Removal at Fukushima Reactor 3 (9/22/2012)arevamirpal2012-09-25 | TEPCO released the videos of the mishap that happened on September 22, 2012, when a piece of steel frame slid into the Reactor 3 Spent Fuel Pool as workers operated cranes by remote control. (See http://youtu.be/cX4XkFfsPM4)
This video briefly shows the remote-controlled equipment currently being used to remove the debris from the operating floor (5th floor) of Reactor 3 at Fukushima I Nuclear Power Plant.
For the coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Steel Frame Slid Into Fukushima I Nuke Plant Reactor 3 Spent Fuel Pool (9/22/2012)arevamirpal2012-09-25 | TEPCO released the videos of the mishap that happened on September 22, 2012, when a piece of steel frame slid into the Reactor 3 Spent Fuel Pool as workers operated cranes by remote control.
In the video, the incident happens toward the end (3:30 - ).
For the coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Cleaning the Buffer Tank of Pipe Shavingsarevamirpal2012-09-13 | TEPCO says it cleaned the buffer tank on September 8, 2012 to get rid of the white substance in the water that is clogging the water treatment system at Fukushima I Nuclear Power Plant, decreasing the cooling water flow into the reactors. TEPCO claims it is the shavings from the pipes when they replaced Kanaflex.
For Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant: Inside the Treated Water Buffer Tankarevamirpal2012-09-08 | TEPCO submerged a video camera inside the butter tank that stores the treated water before the water is fed back into the reactors (Units 1, 2, and 3). The amount of water being fed to the reactors for cooling has been fluctuating significantly, and TEPCO hasn't identified the cause yet.
There are white bits (particles) floating in the water. TEPCO explains the bubbling in the video as "nitrogen".
For more on the problem of the reactor cooling system, read my post: http://bit.ly/PZTFC0
For continued coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3 Operating Floor (7/5/2012) - 4/4arevamirpal2012-07-14 | 4th video of the 4-part videos of Reactor 3 operating floor.
The video was probably taken on July 5, 2012, when TEPCO conducted the air sampling above the Reactor 3 building. The image was probably captured by a camera attached to the boom of the crane.
Video 4 shows the 3rd floor.
For the angles and locations of the videos (there are 4 short videos), go to my blog post: http://bit.ly/LRfanF
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3 Operating Floor (7/5/2012) - 3/4arevamirpal2012-07-14 | 3rd video of the 4-part videos of Reactor 3 operating floor.
The video was probably taken on July 5, 2012, when TEPCO conducted the air sampling above the Reactor 3 building. The image was probably captured by a camera attached to the boom of the crane.
Video 3 shows the 4th floor.
For the angles and locations of the videos (there are 4 short videos), go to my blog post: http://bit.ly/LRfanF
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3 Operating Floor (7/5/2012) - 2/4arevamirpal2012-07-14 | 2nd video of the 4-part videos of Reactor 3 operating floor.
The video was probably taken on July 5, 2012, when TEPCO conducted the air sampling above the Reactor 3 building. The image was probably captured by a camera attached to the boom of the crane.
Video 2 shows the east part of the operating floor, near the Spent Fuel Pool.
For the angles and locations of the videos (there are 4 short videos), go to my blog post: http://bit.ly/LRfanF
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3 Operating Floor (7/5/2012) - 1/4arevamirpal2012-07-14 | 1st video of the 4-part videos of Reactor 3 operating floor.
The video was probably taken on July 5, 2012, when TEPCO conducted the air sampling above the Reactor 3 building. The image was probably captured by a camera attached to the boom of the crane.
Video 1 shows the northwest part of the operating floor.
For the angles and locations of the videos (there are 4 short videos), go to my blog post: http://bit.ly/LRfanF
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Video of Inside the Reactor 3 Torus Room at Fukushima I Nuke Plant (7/11/2012)arevamirpal2012-07-12 | The robot Survey Runner went inside the Torus Room of Reactor 3 at Fukushima I Nuclear Power Plant on July 11, 2012 to survey the radiation levels and record any sound of water. The robot became inoperable when the cable communication was interrupted.
The highest radiation recorded was 360 millisieverts/hour.
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 2 Survey (2) Quince No.2 Encounters 880 mSv/hr Radiation(6/13/2012)arevamirpal2012-06-14 | During the survey of the 5th floor of Reactor 2 building, Quince No.2 encountered a spot with air radiation level of 880 millisieverts/hour. The location is right above the reactor containment vessel. This is the No.11 of the 12 videos TEPCO released on June 14.
The thickness of the concrete floor is 2 meters. For more information on the survey, see my blogposts: http://bit.ly/KqQ3Gn, bit.ly/KKRGcA
For more coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)
Follow on Twitter @exskfFukushima I Nuke Plant Reactor 2 Survey (1) Quince No.2 Encounters Quince No.1 (6/13/2012)arevamirpal2012-06-14 | TEPCO released 12 videos of the survey done by the robot Quince No.2 of the air dose levels inside Reactor 2 building on June 13, 2012. This is the 1st video, where Quince No.2 encounters Quince No.1 which has been stranded and left there since November last year.
Later on the top floor (in a different video (No.11), Quince No.2 measures 880 millisieverts/hour radiation right above the reactor. For that video, go here: http://youtu.be/yfelE87A3Yo
For more coverage of Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 2 Truck Bay Door Area Decontamination (5/25, 28/2012)arevamirpal2012-06-02 | Workers decontaminated the area beyond the Truck Bay Door of the Reactor 2 building on May 25 and 28 to prepare for the work to replace failing thermocouples in the Containment Vessel scheduled later in summer.
They used strippable paint, which had proven to be the most effective method in their earlier experiment.
For more on Fukushima I Nuke Plant accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant 3rd Press Tour on 5/26/2012, Reactor 4 Bldgarevamirpal2012-05-26 | For the first time, the representatives of the press (4 reporters from the Cabinet Office Press Club) went up to the operation floor (top floor) of the Reactor 4 building.
The radiation level on the operation floor was 330 microsieverts/hour, according to Kyodo News, significantly less than other units where the radiation levels are measured in millisievert/hour.
Other photos and the link to NHK video are in my blog post: http://bit.ly/KQ8ArX
For coverage of Fukushima nuclear accident and radiation contamination in Japan, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Reactor 4 Building (Inside, Top Floor) at Fukushima I Nuke Plant (4/24/2012)arevamirpal2012-04-26 | The video was taken when the deputy minister of the Cabinet Office visited the plant on April 24, 2012. He went inside the reactor building to inspect the support structure for the Spent Fuel Pool, and went up to the operation floor to view the SFP.
The first 2 minutes 40 seconds is his speech, which you can skip.
For more coverage of Fukushima nuclear accident and radiation contamination in Japan, visit my blogs: www.exskf.com www.exskf-jp.com (Japanese)Video of Inside the Shield Plug of Fukushima Reactor 3 Containment Vessel(4/18/2012)arevamirpal2012-04-23 | The video was taken by two TEPCO employees on April 18, 2012. TEPCO admitted that the shield plug had been open, through which contaminated water (after cooling the Reactor Pressure Vessel) has been leaking into the reactor building.
The workers received 8 millisievert radiation for their 4-minute work. For more on their mission, see my blogpost: http://bit.ly/JHeuK3
For more Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 2 Torus Room -2 Northeast Manhole(4/18/2012)arevamirpal2012-04-20 | The robot "Survey Runner" went inside the Torus Room of Reactor 2 on April 18 to survey the room for damages and leaks. It found some damage, but no leak was found.
This is the 3rd video of total 6 videos that TEPCO released, showing the area around the northeast manhole. The manhole shows some discoloration, and paint is chipped.
For more coverage of the Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 2 Torus Room -1 Northeast (4/18/2012)arevamirpal2012-04-20 | The robot "Survey Runner" went inside the Torus Room of Reactor 2 on April 18 to survey the room for damages and leaks. It found some damage, but no leak was found. The robot did find the contaminated water, as you can see around 1:50 into this video.
For more coverage of the Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3: Inside the Spent Fuel Pool -3 (4/13/2012)arevamirpal2012-04-17 | TEPCO submerged a video camera in the Spent Fuel Pool of Reactor 3 on April 13, 2012 and released a series of short videos on April 16, 2012. This one shows the fuel handling machine that had fallen in the pool, probably on March 14, 2011 when Reactor 3 had an explosion.
For fuel racks and rods, see the OTHER TWO videos:
Reactor 3's spent fuel pool contained 514 spent fuel rods and 52 new fuel rods at the time of the accident last year. The capacity of the pool is 1220 rods. (Information: Ministry of Economy, Trade and Industry http://bit.ly/fZ50Gh)
For more coverage of the Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs:
www.exskf.com (English)
www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3: Inside the Spent Fuel Pool -2 (4/13/2012)arevamirpal2012-04-17 | TEPCO submerged a video camera in the Spent Fuel Pool of Reactor 3 on April 13, 2012 and released a series of short videos on April 16, 2012. This one shows the fuel rack.
Reactor 3's spent fuel pool contained 514 spent fuel rods and 52 new fuel rods at the time of the accident last year. The capacity of the pool is 1220 rods. (Information: Ministry of Economy, Trade and Industry http://bit.ly/fZ50Gh)
For more coverage of the Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 3: Inside the Spent Fuel Pool -1 (4/13/2012)arevamirpal2012-04-17 | TEPCO submerged a video camera in the Spent Fuel Pool of Reactor 3 on April 13, 2012 and released a series of short videos on April 16, 2012. This one shows the fuel rack.
Reactor 3's spent fuel pool contained 514 spent fuel rods and 52 new fuel rods at the time of the accident last year. The capacity of the pool is 1220 rods. (Information: Ministry of Economy, Trade and Industry http://bit.ly/fZ50Gh)
For more coverage of the Fukushima I Nuke Plant accident and radiation contamination in Japan, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 2 Containment Vessel, 2nd Probe (March 26/27, 2012)arevamirpal2012-03-27 | TEPCO did the second probe of Reactor 2 Containment Vessel on March 26 and 27. This is the summary video of the March 26 endoscopic examination.
For more coverage of Fukushima I Nuke Plant accident and radiation contamination, please visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 4 Spent Fuel Pool, Cask Pit 3/21/2012arevamirpal2012-03-22 | The video was taken on March 21, 2012 and released by TEPCO on March 22, 2012.
For more coverage of Fukushima I Nuke Plant accident and radiation contamination, visit my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Fukushima I Nuke Plant Reactor 4 Spent Fuel Pool 3/16/2012arevamirpal2012-03-16 | TEPCO used the camera on March 15, but the visibility was too low. So this is their second try with the ROV on March 16.
Water is murkier, and you see more debris than in the video taken in February.
For more Fukushima nuclear accident and radiation contamination in Japan, go to my blogs: www.exskf.com (English) www.exskf-jp.com (Japanese)Expedition to Fukushima I Nuke Plant Reactor 3 Torus Room, 3/14/2012arevamirpal2012-03-16 | This is the video of the expedition to Fukushima Reactor 3's Torus Room where the Suppression Chamber is located.
TEPCO workers could not open the door to the Torus Room, as the door was deformed.