The Fusion Essentials
Getting Started with Fusion 360 Part 1 - BEGINNERS START HERE! - Intro to the Workspace
updated
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:11 - Solid Sweep Vs Regular Sweep
2:14 - Creating opening paths for objects with Solid Sweeps
2:47 - Creating tracks and slots for 3D shapes/ Extrusion Distance
3:33 - When might you use this tool instead of regular sweeps
5:18 - Creating arrays of results on an object
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:11 - Example Model location
0:43 - Adjusting your environment light settings
2:07 - Showing image backgrounds with lighting environments
3:41 - Adjusting and rotating your environment
4:45 - How to add a solid color background
5:36 - Using an exterior HDRI for lighting and backdrop in Fusion 360
7:31 - Importing custom environments to Fusion 360
12:21 - Creating artificial lights in Fusion 360
14:12 - Applying an emissive material and adjusting settings
15:00 - How to get artificial lights to actually light your scene and cast shadows
16:26 - Replicating a lighting studio setup
FULL GETTING STARTED RENDERING PLAYLIST
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:30 - Modeling a base shape for rendering/where to find rendering mode
1:17 - Applying materials to objects in Fusion 360
2:47 - How object size affects the way materials look
3:23 - How to make materials bigger or smaller
6:12 - Materials in Fusion with no texture (Paint, Glass, etc)
7:06 - Adjusting object reflectivity with Roughness and Reflectance
8:50 - Paint fleck materials
9:25 - Plastic materials
10:05 - Transparent/Translucent Materials
11:15 - Materials that have textures
11:57 - Material PBR maps (more realistic materials)
13:42 - Creating custom materials
16:14 - Applying PBR Maps to a custom material
17:28 - Better reflections with roughness maps
18:00 - Bumpy materials with normal and height maps
20:44 - Fixing material mapping issues
22:00 - Final rendered results
FULL GETTING STARTED RENDERING PLAYLIST
youtube.com/watch?v=7VWmtq_qXnw&list=PLHEouj-sdEJFF2YZrFfyimPiX_lDGlxsn
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:11 - Adding materials to objects in Fusion 360
3:15 - How to activate rendering mode
4:57 - Adjusting materials and properties (reflectivity, etc)
6:40 - Creating in-canvas renderings
6:55 - Adjusting the lighting and environment
9:08 - Creating final renderings
POLY HAVEN FREE TEXTURES
polyhaven.com/textures
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:20 - Downloading custom texture files
1:32 - Creating a custom material in Fusion 360
4:28 - Resizing custom materials
6:49 - Loading PBR maps for reflections, bumpiness, and displacement
12:20 - How to save materials for use in other projects
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
FULL GETTING STARTED IN FUSION 360 PLAYLIST
youtube.com/watch?v=Izh99EnGLGw&list=PLHEouj-sdEJEm_xextUwnfhRJEdUs2hn4
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:11 - Getting started with the animation tab
1:37 - Setting up our camera movement
3:15 - Adding a rotation animation
4:10 - Adjusting our animation length and number of rotations
7:04 - Adding an assembly animation to the screws
9:00 - Adding a transform to multiple objects
10:08 - Exporting our animation to a video file
11:00 - Final result
FULL FUSION 360 JOINT TUTORIAL PLAYLIST
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:15 - Components vs. Bodies
3:51 - Adding a joint relationship
5:29 - Setting the type of joint
7:09 - Grounding an object so it doesn't move around
8:22 - Setting joint movement limits
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:11 - Applying materials to objects in Fusion 360
3:42 - How to edit materials in Fusion 360
4:46 - Editing advanced material properties (shininess, bump, etc)
7:26 - Creating custom materials in Fusion 360
9:33 - Getting started with Rendering - Render mode
11:32 - Lighting environments in Fusion 360
12:40 - Using an in-canvas render
14:17 - Creating a final render
15:18 - Downloading rendered images
16:05 - Saving rendered images to update with changes
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:20 - Extruding shapes to 3D
1:59 - Revolve profiles
3:56 - Profiles along paths with sweeps
5:37 - Reference planes with offset planes
6:10 - Shapes from edge profiles with Lofting
8:38 - Loft surfaces instead of solids
9:27 - Copies of objects with patterns!
10:57 - Patterns along paths
12:11 - Removing material - cut mode
14:22 - Removing material - revolve and remove
15:59 - How to Cut Holes in Fusion 360
17:28 - Adding threads to holes in Fusion 360
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
FULL FUSION 360 BEGINNER TUTORIAL PLAYLIST
youtube.com/playlist?list=PLHEouj-sdEJEm_xextUwnfhRJEdUs2hn4
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
FULL FUSION 360 BEGINNER TUTORIAL PLAYLIST
youtube.com/watch?v=Izh99EnGLGw&list=PLHEouj-sdEJEm_xextUwnfhRJEdUs2hn4
The Fusion Essentials is not affiliated with Autodesk. "Autodesk" and "Autodesk 360 Fusion" are registered trademarks of Autodesk, Inc.
TIMESTAMPS
0:00 - Introduction
0:26 - Where to find the drawing function
3:15 - Adjusting drawing scale
4:00 - How to add dimensions to drawings in Fusion
7:56 - Adding multiple views to a sheet
10:02 - Using aligned views in Fusion 360
11:50 - Changing your titleblock
12:47 - How to print drawings from Fusion 360
This tool can create cuts and gaps in your sheet metal components, PLUS it works with the new configurations function to allow you to show different rip options directly in your 3D viewport!
Easily swap between different appearances, design configurations, and more!
FUSION 360 WOODWORKING TUTORIALS
youtube.com/playlist?list=PLHEouj-sdEJFwd0zh8kDJKj7dw61qULNO
FULL RENDERING IN FUSION 360 PLAYLIST
youtube.com/watch?v=Ww-Krcff_48&list=PLHEouj-sdEJE6dkRSZjs41efoCf99yIaU
This method allows you to create a custom video file where the parts and pieces of a table fly apart and back together. Use this to see how objects are constructed and more!
CABINET MODELING VIDEO
youtu.be/ixN7f1i1tHc
FUSION 360 WOODWORKING
youtube.com/watch?v=h10qk4MnAK0&list=PLHEouj-sdEJFwd0zh8kDJKj7dw61qULNO
In the next video, we'll talk about how to create detailed plans from our cabinet!
Intersecting shapes with the solid operations in Fusion 360 can be an easy way to quickly model complex shapes in your models!
In this video, we'll create a sketch inside of Fusion 360 containing the profiles of our shelving, then we'll use the extrude tool in order to extrude our profiles into components!
FULL FUSION 360 FOR ARCHITECTURE PLAYLIST
youtube.com/watch?v=_TWobsxGZ_Q&list=PLHEouj-sdEJGtapLpsxcfGoiL0C7i4aVz
FULL FUSION 360 MATERIAL AND RENDERING PLAYLIST
youtube.com/watch?v=Ww-Krcff_48&list=PLHEouj-sdEJE6dkRSZjs41efoCf99yIaU
TEXTURE HAVEN MARBLE MATERIAL
texturehaven.com/tex/?t=marble_01
FUSION 360 FOR ARCHITECTURE PLAYLIST
youtube.com/watch?v=_TWobsxGZ_Q&list=PLHEouj-sdEJGtapLpsxcfGoiL0C7i4aVz
FUSION 360 FOR ARCHITECTURE PLAYLIST
youtube.com/watch?v=_TWobsxGZ_Q&list=PLHEouj-sdEJGtapLpsxcfGoiL0C7i4aVz
We'll continue this series in a future video by talking about how you can take materials into the Fusion 360 rendering engine to create photorealistic renderings from your Fusion 360 models, so stay tuned!
FUSION 360 TOOL TUTORIALS
youtube.com/watch?v=kk3M9ew2Qg0&list=PLHEouj-sdEJG-5313nFyVRmm1eU39VG9x
This can be useful for many different things, including cutting openings in irregularly shaped objects, modeling things like fences, and much more.
The way it works is fairly simple – you just select a face, body, component, or feature, then select a path. The object will follow along the path. You can set the number of objects created, the distance along which your objects are extruded (note this this will snap to the end of your path for easy placement).
LINK TO BOX MODELING TUTORIAL
youtube.com/watch?v=z7LVWbxtZj4
In this tutorial we're going to learn to model all of our different box parts to scale. In the next video, we'll talk more about exporting plans and a cutlist from our model!
Create an object that slides, then add motion limits to limit how far your door can slide along the track for an accurate simulation of your door movement!
FULL FUSION 360 JOINT TUTORIAL PLAYLIST
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
In this video, we cover the following -
1. Mitered Butt Joint
2. Half Lap Joint
3. Mortise and Tenon Joint
4. Tongue and Groove Joint
5. Rabbet Joint
If there are other joints you'd like to learn how to create in Fusion 360, leave a comment down below the video and let me know what they are!
TOOLS USED
Extrude Tool - youtube.com/watch?v=7HZ7BFM_3LU
Fillet Tool - youtube.com/watch?v=mxuHhbHSYdI
Hole Tool - youtube.com/watch?v=4bDNXpWQaW4
Combine Tool
In addition, we'll set the model up so that we can print off a set of floor plans and a cutlist as well!
Tools Used -
- Extrude Tool
- Rectangular Pattern Tool
- Move Tool
- Components
- Drawing Workspace
FUSION 360 JOINT TUTORIAL PLAYLIST
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
Note that in this video, we’re going to talk about how to simulate the movement of the joint, not how to model the actual gear pieces. For the gear pieces, we’re going to use components from inside the McMaster Carr component library.
McMaster Carr Component Library Info
youtube.com/watch?v=45AlAWDhA8o
To start off, let’s download a worm component, as well as a worm gear. In this situation, let’s download a worm with a key of 12, and a worm with a 12 pitch and a 20:1 gear ratio.
Once we download these, we’re going to align our gears. This is actually a bit easier than aligning the bevel gears like we did last week. Notice that if you use the standard views with the view cube this is a lot easier.
Now, we need to add a couple empty components. These gears actually need to rotate around a point in space, rather than each other, so we need to have a couple components to link the as-built components to.
In these empty components, add an axis along the center of your object. We’re then going to create an as-built joint between this axis and our gears. This will allow them to rotate in place. These will be revolute joints because they spin around a point.
Now, let’s create a motion link between the two joints. In this situation, since the speed ratio is 20:1, we need our worm to spin 20 times faster than our gear, so our gear would be set to 360 degrees/20, and our worm would be set to 360 degrees.
Finally, we'll add a handle with a rigid joint between the handle and the worm gear!
To start off, this is an FBX model I downloaded from Turbosquid for free and imported. I will link to it in the notes below, but there was a bit of re-work involved for this application.
TURBOSQUID HELICOPTER MODEL
turbosquid.com/3d-models/uh-60-blackhawk-max-free/624253
It’s not ideal, but it will work for this application. One thing to note is that I needed to take the rotor geometry and put it into its own component for this animation to work as the rotors need to animate independently from the rest of the model.
To start off, we’re going to want to change to the animation workspace. This workspace contains a different toolset than the design workspace, which is more focused on helping you create animations.
Intro to the Animation workspace –
- Top bar contains tools
- Left bar contains your browser
- Workspace is where you see your model
- Animation timeline is where you’re going to control your various animation elements
Now let’s create a simple animation. We’re going to start by adding a new transformation at the top of the page. It’s going to ask us to select a component to transform (or move). Let’s select the rotor head that I’ve created.
We can apply a rotation to this rotor, but you’re going to notice that it doesn’t do anything if you select ok. This is because we haven’t set a time for the animation inside of the timeline. What we want to do is start by dragging the little indicator on the timeline to a time associated with the length of the clip we want to create. In this case, for example, I’m going to set it to 4 seconds, which will create a 4 second long animation.
Now if you add your transformation, it will animate this transformation over 4 seconds and add a little clip on your timeline. You can right click on this clip and adjust the duration, edit the action itself, and more.
Add another transformation with the clip set with the end to be at 12 seconds and set our rotation to a larger number, like 4320. This would be 12 rotations over 8 seconds.
Finally, let’s add a movement. Select your whole helicopter as the transform object this time, and set a movement where your helicopter flies off the screen.
Notice you can also set your camera at different points in time by selecting those points on the timeline, then moving your camera to the location you’d like.
Finally, you can export your animation to a video file by clicking on publish.
AUTODESK FUSION 360 TOOL TUTORIAL PLAYLIST
youtube.com/watch?v=kk3M9ew2Qg0&list=PLHEouj-sdEJG-5313nFyVRmm1eU39VG9x
Remember that most of what we’ve talked about when working with Fusion 360 has been working with solid models. These are models that are completely enclosed with no holes. If we were to inspect these objects, for example, you’d see a simple, solid fill inside of them.
However, sometimes, you want to take a solid and remove the material on the inside, either to make it lighter, or to save on material, or sometimes this is just what the object needs to be, like a cup or a vase.
This tool will remove the central material of an object to create a shell from the geometry you have selected.
This can work in a few different ways. The first, and probably the easiest, is to activate the tool and select the faces from which you’d like to create a shell.
For example – with our cylinder, if we select the top face, then run the shell tool, it will remove your top face and create a shell of a thickness you dictate with the rest of your object. If we inspect this, you can see that it creates a solid shape with a thickness with the remaining walls.
If you were to select the top and bottom of the cylinder, this would shell out just the cylinder walls.
This works for more complex shapes as well, like this vase shape, simply by selecting the top face.
Notice that the tool can thicken inward, outward, or both.
Notice that this works a bit differently depending on how you model your shapes. For example – one of these objects was modeled using the extrude tool in join mode, while the other was modeled with the thickened portion being a new body.
Notice that the thicken tool will give you a smooth hole all the way through with the one where the thickened portion is a separate body, while the other will shell based on the whole object, meaning you don’t get a smooth transition.
As a general rule, I find this tool works the best when you have an object with “ends” that you can select – this allows you to quickly create a shell. If you select one end, you make a shape almost like a cup, but if you select both, you make an object with a hole that travels fully through.
FULL FUSION 360 JOINT TUTORIAL PLAYLIST
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
First things first – I’m really not trying to create a super accurate gear model, meaning a gear that’s exactly mathematically correct, but rather focusing on simulating the movement. This should get you close enough to create a visual approximation, and might even work if you were to 3D print the gears, but I have not gone through and done the calculations necessary to make this an exact mathematical gear model.
- Download gears from the McMaster Carr Library
- Place gears using the move tool
- Note this doesn’t have to be perfect for this application – just get close
- These gears are going to be built as as-built joints, or joints that are modeled in place, rather than normal joints, which move relative to each other
- Create an empty component, then put a sketch line inside the component. This will act as your ground component
- Create an as-built revolute joint between the sketch line and the gear
- Ground the sketch line component
- Do the same thing for the second gear
- Now, create a motion link between the two gears – the smaller gear should have a gear ratio half that of the larger gear
More info on the McMaster Carr Warehouse here - youtube.com/watch?v=45AlAWDhA8o
This format won't replace any of the other tutorial content, but rather acts as a way for me to be able to generate helpful videos about Fusion 360 even in times where I don't have access to a microphone.
Let me know if you have any questions about the workflow in the comments below!
In this video, we're going to model out a pipe shelf in Fusion 360. Tools used include the McMaster Carr component library, the rectangular pattern tool, the move tool and point to point alignment, and more!
FULL FUSION FOR WOODWORKING PLAYLIST HERE
youtube.com/watch?v=h10qk4MnAK0&list=PLHEouj-sdEJFwd0zh8kDJKj7dw61qULNO
In this video, learn how to create a table in a way inside of Fusion 360 where we can generate a parts list, or a cutlist! We'll start by modeling out the parts and pieces of the table, which will need to be components.
Since we've modeled our parts as components, we can then use the tables function of the drawing tools to create a table that totals our parts and pieces into a cutlist that can be printed as a part of our drawings!
The thicken tool is a tool inside of Fusion 360 designed to help you add thickness to objects to make them solids. You’re usually going to use this tool in conjunction with the surface function, rather than the solid function, because solids are already…solid.
We’ll talk a bit more about surfaces in another video, but generally, while the solids tool creates objects with thickness, the surface function uses edges to create surfaces that don’t have any thickness. This is fine for some kinds of models, but if you’re going to do any 3D printing or anything with any real-world application, your models need to be solid to work.
The way the tool works is fairly simple – simply take a shape, activate the tool, and select the object you want to thicken. Notice that this will not work with an object that already has thickness.
- Use to give both inside and outside thickness
- Can select multiple objects and they’ll thicken together
- Leaves the original object in place
- Has the same functions as other tools – symmetric, one sided
- Can do join, cut, etc
- If you want straight up and down – extrude. If you want to thicken relative to the shapes you have selected, use thicken
Full Fusion 360 Joint Tutorial Playlist
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
In this series, we’ve talked about the different kinds of moving joints you can use in Fusion 360 in order to simulate movement. In this video, I want to talk about creating operating gears inside of Fusion 360 that have movement tied together, so that when one gear moves, another gear moves accurately at the same time.
In order to do this, we’re going to start by creating our gears. I don’t want to get super in-depth about the mechanics of gears in this particular video, so what we’re going to do instead is use a script to create our gears. Scripts are basically little mini-programs inside of Fusion 360 that automate an action.
You can access them in the “tools” toolbar, under the add-ins function, under the scripts and add-ins button. In this particular case, we’re going to scroll down and look for the function labeled “spur gear.” This script is designed to help you create gears inside of Fusion 360.
Click on the script (doesn’t really matter which of the two), then click the button for “run.” To start off, let’s create one gear with 24 teeth. Change the hole size to 1 inch and click the button for “ok.” This will create one gear with 24 teeth. Now, let’s create another gear that has 48 teeth. Notice that the gear with 48 teeth is twice as large as the gear with 24 teeth.
Move the gear so that the teeth align. What we want to do is rotate our gear so our teeth align. This is actually pretty easy. When you think about it, this gear has 48 teeth, meaning it also has 48 gaps. Rotate the gear by 360 divided by 48. You may do a bit of fine adjusting here.
Create a body to make up the center of the gear, then create a component from the body. Do the same for the second gear.
Now, create as-built joints between the gears and the central posts. This allows us to dictate the base spin location of the gears. This is going to be a revolute joint.
Make sure to ground the central piece so it can’t move.
Finally, we want to use the motion link to tie the movement of the two gears together. Remember that with the gear ratio, the 48 tooth gear should move twice as fast as the smaller gear, so set the motion of the big gear to 360, and the smaller gear to 180. This will make the smaller gear half as fast.
This won't replace any of the other tutorial content, but rather acts as a way for me to be able to generate helpful videos about Fusion 360 even in times where I don't have access to a microphone.
Leave a comment below and let me know what you think about this format as a supplement, not a replacement of other kinds of content.
In addition, let me know if you have any questions about the workflow!
In this first video, we're going to model out a picnic table in Fusion 360. Tools used include the extrude tool, the mirror tool, the rectangular pattern tool, and more!
FUSION 360 JOINTS PLAYLIST
youtube.com/watch?v=gGgmA1WZESs&list=PLHEouj-sdEJEdDfqwsiKI2izfYUGHi_Mu
One of the great features of Autodesk Fusion 360 is the ability to simulate joints. This can give you an idea of how objects will move in real life. Not only can you create individual joints, you can also link their movement together to create a more complete simulation of object movement.
For example – in this video, we have 2 different kinds of joints – a cylindrical joint for the handle, and a slider joint for the wood jaw. We create a motion link to link the rotation of the handle to the movement in and out of the handle. This will create movement when we spin our handle.
Then, we can link the slide movement of the jaw with the slide movement of the handle. This will create an accurate simulation of a Vise movement within Fusion 360!


