Band Saw Clinic with Alex Snodgrass thewoodworkingshows 2024-10-15 | Band Saw Clinic with Alex Snodgrass
Roland Johnson - With The Grain thewoodworkingshows 2023-01-26 | Wood grain can make or break a project. In this seminar Roland will discuss the different cuts of wood (flat, quarter, rift), how to choose which is appropriate for your project, what EMC is, and how to lay out parts for the best appearance and function.
Roland Johnson Sanding For A Finish thewoodworkingshows 2023-01-26 | Preparing for a finish is the most important aspect of finishing. Roland will discuss how to properly sand a project and the pitfalls that can turn a great project into a great disaster.
Roland Johnson - Coloring Wood thewoodworkingshows 2023-01-26 | Most woodworkers are terrified of using stain or dye on their projects. This seminar will dispel the myths and provide a great foundation for applying color without failure. Color, it’s what makes the world beautiful!
Roland Johnson - Brush Your Way To A Wicked Good Finish thewoodworkingshows 2023-01-26 | One of the most frequent questions Roland's asked is “what is the best finish?”. In this seminar Roland will show you how to apply one of his favorites, true oil-based varnish. You'll look at both wipe-on and brush application.
Roland Johnson - Woodworking Alchemy thewoodworkingshows 2023-01-26 | Bringing old woodworking machinery back to life is a great way to fill your shop with great machines for a fraction of what new costs. Roland will discuss how to determine what tools are worth saving, cover resources for information or parts, and go through the basics of rust removal. He’ll also show you a slick setup tool.
Roland Johnson - Handplanes thewoodworkingshows 2023-01-26 | One of the real joys of woodworking is being able to surface wood using a hand plane. In this seminar Roland will discuss how to turn an old Stanley Bailey bench plane into a real treasure.
Roland Johnson - Bevel Up, Bevel Down Planes thewoodworkingshows 2023-01-26 | There’s lots of confusion about the difference between bevel up or bevel down hand planes and what the angles are all about. Roland will discuss how the planes work with the wood and the basics of sharpening those bevels.
Chuck Bender - Table Saw Basics thewoodworkingshows 2023-01-26 | The table saw is central to many woodworking workshops, and its versatility is unrivaled. What should you look for in a new saw? How should you tune your saw to get straight, accurate cuts? What are the best practices to operate a saw safely? In this seminar, Chuck answers all those questions and many more.
Roland Johnson - Card Scraper Magic thewoodworkingshows 2023-01-26 | One of the most useful tools in the woodworking shop is the card scraper. One of the most frustrating tools in the shop is the card scraper. Roland will show you how to quickly turn a little piece of steel into a grain-conquering hero. It’s darned near magic!
Chuck Bender - Bandsaw Basics thewoodworkingshows 2023-01-26 | The bandsaw is the safest machine in the workshop, which makes it one of the most dangerous. Often woodworkers opt to center their shop around a bandsaw because they’re considered to be safe and versatile. If you haven’t used a bandsaw much in your woodworking, let Chuck walk you through the basics of how to safely operate this time-honored tool.
Chuck Bender - Dados, Rabbets & Grooves thewoodworkingshows 2023-01-26 | The versatility of the table saw doesn’t shine any better than when it’s put to use making joints. In one form or another, most of those joints involve removing material to create a dado or rabbet. Chuck shows you multiple ways of making these essential woodworking joints.
Chuck Bender - Essential Bandsaw Jigs & Fixtures thewoodworkingshows 2023-01-26 | The bandsaw can do far more than simply resaw lumber or cut out the curvy edge of a wall shelf. With the addition of a few shop-made jigs, you’ll be able to do more than you ever imagined with your bandsaw.
Chuck Bender - Chamfers, Bevels & Miters thewoodworkingshows 2023-01-26 | Whether you’re making crown molding for a piece of furniture, adding a decorative detail to a piece of millwork, or making a picture frame, the table saw is the perfect tool to cut clean, accurate miters, bevels and chamfers. Join Chuck as he demonstrates the tricks of the trade for making perfect, accurate miters, bevels and chamfers.
Chuck Bender - CNC Basics thewoodworkingshows 2023-01-26 | The inclusion of CNC machines in the home workshop is one of the fastest growing segments in the woodworking industry. Join Chuck as he sets up, calibrates and begins using a small CNC machine in his shop. With the right machine, and user-friendly software the machine will be up and running in no time.
Chuck Bender - Three Essential Table Saw Jigs thewoodworkingshows 2023-01-26 | If you’ve taken the three previous seminars on table saws, you probably realize how versatile they are. But if you truly want to get the most out of your saw, there are a few essential shop-made jigs you can use to accomplish more and do it with a greater degree of safety. Chuck shows you his top three essential table saw jigs in this final table saw seminar.
Chuck Bender - CNC Projects For The Traditional Woodworker thewoodworkingshows 2023-01-26 | Although many look at CNC machines as some sort of way to cheat at woodworking, Chuck shows you how you can use one to augment your skills. As an 18th Century furniture maker, Chuck has always tried to strike a balance between the artistry of hand-tool woodworking and including the efficiency of using power tools. Watch and he shows you how to design and execute a small project “on the fly” that supplements his traditional furniture while maintaining his reputation for museum-quality reproductions.
Jim Heavy - Introduction To The Router thewoodworkingshows 2023-01-26 | In this video, Jim will cover router selection and use, a variety of accessories and building a basic set of router bits. This presentation will also include router table use and solutions to common routing problems.
Jim Heavey - Mastering Router The Dovetail Jig thewoodworkingshows 2023-01-26 | Jim has long felt that a dovetail joint is a mark of craftsmanship. This joint is easy to make using a standard dovetail jig. In this video Jim will show you how to set it up including the tips and techniques needed to produce this beautiful and strong classic joint.
Jim Heavey - Router Raised Panel Doors thewoodworkingshows 2023-01-26 | This video is project based. Jim will review and demonstrate the process and bits needed to produce rail and stile joints as well as raised panel inserts that can be used to create impressive doors and drawer fronts.
Jim Heavey - Router Raised Panel Doors Teaser thewoodworkingshows 2021-04-29 | Teaser for Jim's Router Raised Panel Doors video from The Month Of Woodworking Shows
Jim Heavey - Router Dovetail Jig Teaser thewoodworkingshows 2021-04-29 | Teaser for Jim's Router Dovetail Jig video from The Month Of Woodworking Shows
Jim Heavey - Shop Made Jigs For Your Router Teaser thewoodworkingshows 2021-04-29 | Teaser for Jim's Shop Made Jigs For Your Router video from The Month Of Woodworking Shows
Jim Heavey - Introduction To The Router Teaser thewoodworkingshows 2021-04-29 | Teaser for Jim's Introduction To The Router video from The Month Of Woodworking Shows
Chuck Bender - CNC Projects For The Traditional Woodworker Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's CNC Projects For The Traditional Woodworker video from The Month Of Woodworking Shows
Chuck Bender - Three Essential Table Saw Jigs Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Three Essential Table Saw Jigs video from The Month Of Woodworking Shows
Chuck Bender - CNC Basics Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's CNC Basics video from The Month Of Woodworking Shows
Chuck Bender - Chamfers, Bevels & Miters Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Chamfers, Bevels & Miters video from The Month Of Woodworking Shows
Chuck Bender - Essential Bandsaw Jigs & Fixtures Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Essential Bandsaw Jigs & Fixtures video from The Month Of Woodworking Shows
Chuck Bender - Dados, Rabbets, & Grooves Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Dados, Rabbets, & Grooves video from The Month Of Woodworking Shows
Chuck Bender - Bandsaw Basics Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Bandsaw Basics video from The Month Of Woodworking Shows
Chuck Bender - Table Saw Basics Teaser thewoodworkingshows 2021-04-29 | Teaser for Chuck's Table Saw Basics video from The Month Of Woodworking Shows
Roland Johnson - Card Scraper Magic Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Design Card Scraper Magic video from The Month Of Woodworking Shows
Roland Johnson - Bevel Up Bevel Down Hand Planes Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Bevel Up Bevel Down Hand Planes video from The Month Of Woodworking Shows
Roland Johnson - Handplanes Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Handplanes video from The Month Of Woodworking Shows
Roland Johnson - Woodworking Alchemy Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Woodworking Alchemy video from The Month Of Woodworking Shows
Roland Johnson - Wicked Good Finish Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Brush Your Way To A Wicked Good Finish video from The Month Of Woodworking Shows
Roland Johnson - Coloring Wood Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Coloring Wood video from The Month Of Woodworking Shows
Roland Johnson - Sanding For A Finish Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Sanding Your Way To A Fine Finish video from The Month Of Woodworking Shows
Roland Johnson - With The Grain Teaser thewoodworkingshows 2021-04-28 | Teaser for Roland's Design With The Grain video from The Month Of Woodworking Shows
The Virtual Woodworkings Shows Teaser with Alex Snodgrass thewoodworkingshows 2021-03-23 | As we get ready for our final virtual woodworking show in March, check-out a clip from bandsaw master, Alex Snodgrass. The Virtual Woodworking Shows, bring you 15 new seminars (per show) from The Woodworking Show educators you have come to trust. Tickets are now available for the virtual show season!
A Month of Virtual Woodworking Shows, with Roland Johnson of Fine Woodworking Magazine thewoodworkingshows 2021-02-16 | Will virtual shows be the same as in person shows? Nope! But will they be jammed packed with educational seminars? Yes! Check-out our lastest Virtual Woodworking Show teaser with Roland Johnson.
Jim Heavey of Wood Magazine & A Month of Woodworking thewoodworkingshows 2021-02-08 | The Woodworking Shows is going virtual in March! Here's our own Jim Heavey giving us a sneak peek on what he'll be up to for his month long seminar series for the shows.
Why Attend? thewoodworkingshows 2020-09-24 | Show presenters, Roland Johnson, contributing editor of Fine Woodworking Magazine, and Jim Heavey of Wood Magazine share their thoughts with you on why you should attend The Woodworking Show for the 2021 season. We hope to see you out on the road this winter! The show schedule is live for 2021, and is up on our website. All shows are tentative due to Covid-19.
Wednesday Wisdom, Episode 8 thewoodworkingshows 2020-09-14 | Does technology in the shop scare you? Let Laney at Digital Wood Carver convince you otherwise, with episode #8 of Wednesday Wisdom!
Wednesday Wisdom, Episode 9 thewoodworkingshows 2020-09-14 | Turn something great this week, with this tip from The Walnut Log Studio And Supply in Episode 9 of Wednesday Wisdom with The Woodworking Shows!
Wednesday Wisdom, Episode 6 thewoodworkingshows 2020-09-14 | Episode 6: With Tyler Hillyard of Urban Timber.Sending some love and woodworking knowledge your way, on this afternoon, enjoy.
Wednesday Wisdom, Episode 10 thewoodworkingshows 2020-09-14 | Episode 10 of Wednesday Wisdom is here! Join show educator, Kathrina Nellis for a great tip on sharpening your Arbortech TurboPlane.
Wednesday Wisdom, Episode 7 thewoodworkingshows 2020-09-14 | Join us for a sanding tip today, for Episode #7 of Wednesday Wisdom!This week we invited @THEBUILDwithETHAN to share one of his favorite tips (head over to Insta to follow is work). Ethan is a dedicated show goer, and if you attended our NJ show in 2020, you may have caught him capturing Alex Snodgrass on the band saw.
Wedneday Wisdom, Episode #2 thewoodworkingshows 2020-09-14 | Jim Heavey of Woodworking Magazine, and The Woodworking Shows shares one of his favorite woodworking tips, all from the comfort of his shop.
Wednesday Wisdom, Episode 4 thewoodworkingshows 2020-09-14 | Join Chuck Bender of Acanthus Workshop, and instructor at The Woodworking Shows, as he shares a tip for surface prep.
