Worlds largest sugar rocket motor, 2nd test fire for Sugar Shot to Spacemojaverockets2026-11-18 | Worlds largest sugar rocket motor, 2nd test fire for Sugar Shot to Space$4 KNSB sugar rocket motor flight # 16 at FARmojaverockets2022-10-03 | The 16th flight of the $24 Elmer 'School Glue' Cardboard low-cost High Power Rocket project. It began as a project to build a complete 4" high-power rocket capable of Mach flight for under $100. The rocket dual deploy airframe, nose cone, propellant grains and avionics were built in 8 hours and for under $24 in cost of materials. The motor case and parachute were already built from previous projects for and estimated $50 making the total cost under $100. Each successive flight cost between $4 and $8 depending on motor used: 2-grain is $4 and 4-grain L-1150 is $8. This motor is actually a K-550, not a K-450 as the title says. Doing LCO is FAR Treasurer Mark Holthaus, RSO is Rick Maschek. Also shown in the video is the new FAR control center used for the UCLA hybrid launch previous to this launch.Friends of Amateur Rocketry Sept 3 2022 activitiesmojaverockets2022-09-05 | Several student groups and individual projects were tested and launched. Two different LOX-Propane liquid bi-propellant motors from UC Berkeley SEB group including a 3D printed 4" rocket launched on an Aerotech L-impulse apcp motor. Half Cat was testing their liquid Nitrous oxide IPA rocket. Students from Norco College launched several Mad Cow Super DX# rockets on H, I, and J-impulse Aerotech apcp motors. FAR again tested the Student liquid LOX-IPA rocket underdevelopment to be offered to school groups as a learning tool. Rick Maschek flew his $25 rocket this time with a $4 KNSB 'sugar' propellant reload. A sugar rocket tested by a first-time FAR user and an individual Berkeley student launch is not included in the video. . www.friendsofamateurrocketry.orgDec 5 2020 SS2S case bonded 8 inch 200mm rocket motor testmojaverockets2022-08-30 | Our 4th test of this 8" (200mm) fiberglass case, KNSB propellant. This test was done by case bonding the 'sugar' propellantSugar Sorbitol and Nitrous hybrid rocket motor testmojaverockets2022-08-03 | Static test of our 90% sorbitol fuel grain with 10% KNO3 added. Motor eventually ignited with an APCP augmented igniter for preheat. Core was 1" x 5" long. stainless steel nozzle, aluminum motor case. O-ring failure caused burn through cutting this 11th test short. At 0:40 you can see left motor side exhaust bypassing the failed O-ringSugar (Sorbitol) nitrous oxide hybridmojaverockets2022-08-01 | Nitrous oxide with a 95% sorbitol and 5% wax fuel grainLow cost K 450 KNSB sugar rocket launchmojaverockets2022-07-18 | 4-inch minimum diameter two grain K-450 KNSB sugar propellant launch. Rocket airframe was made from a discarded 12-foot-long cardboard tube from a home improvement store, cut into 12 pieces to make the airframe, dual deployment av-bay, and fin can using Elmer's School Glue...no epoxy touched this rocket. A low cost demonstrator rocket to show high power rocketry doesn't have to be expensive, the goal was under $50 for the rocket. The entire project including the rocket, K-450 propellant reload and Eggtimer Apogee flight computer cost $24 minus the parachute and motor case. Those were also made at the cost of $8 for the parachute and $14 for the metal (both made for a previous project). The nose cone was the top of a Shasta soda bottle. This was the last rocket flown on this 110 F July day, thanks to those at FAR that helped.
Useful sites for the build: nakka-rocketry.net facebook.com/photo?fbid=10221241537924106&set=gm.919235142005454Kosmos Rocketry 2022 ESRA SAC competitionmojaverockets2022-06-29 | Students from the Federal University of Santa Catarina first time entry in the ESRA 2022 Spaceport America Cup competition. Forty dollar 6-grain KNSB 'sugar' propellant N-impulse student-developed motor. Rocket shred from possible fin delamination near the time of motor burnout from evidence found during recoveryAtlas LR 101 Vernier Thruster Test Twomojaverockets2022-04-23 | Second firing of the Atlas LR-101 Tests were conducted at the Friends of Amateur Rocketry facility, Mojave Desert. First test can be seen here: youtube.com/watch?v=XXti8FyP1NEAtlas LR 101 Vernier Thruster testmojaverockets2022-04-22 | LOX-Kero liquid bi-propellant test at the FAR facility. I was going through some external hard drives looking for a video and saw this from some time ago. Don't remember who's test it was but shows that things don't always go as planned.Holthaus Hinge nose cone deployment testmojaverockets2022-02-27 | Flight test of the 'Holthaus Hinge' nose cone parachute deployment system. It uses a spring-loaded hinge to separate the nose cone of the rocket and pull out the drogue parachute. No pyrogen or CO2 used.F-100 motor 2-stage CATO at FARmojaverockets2022-02-20 | Last flight of the day, a 2-stage scratch-built rocket after a day of really successful and some not so successful flights and static motor tests. The 'old' 'FSI (?) F-100 motor (not an Estes) in the sustainer CATOed but came down on chute.MtSAC STARS propellant team KNSB test 2-10-2022mojaverockets2022-02-11 | 4th KNSB 'sugar' propellant test. Approximately 2 pounds (1 kilogram) in a single BATES grain.MtSAC STARS new rocket motor testmojaverockets2022-02-04 | The MtSAC 'Green' Propellant STARS team third KNSB propellant test using the new 100 mm single grain propellant test motor, 940 grams of KNSB. 303 stainless steel nozzle, 6061-T-6 aluminum case, and bulkhead using snap ring retention. A vertical test stand I-beam mount for nozzle down flight orientation is being designed.Two MtSAC static solid rocket motor testsmojaverockets2022-01-29 | First two rocket motor propellant static tests with a new team of students. One eventually worked as planned and the other popped the nozzle when it overpressurized and blew the snap ring...a great unintended demonstration of how not to blow a motor case to pieces. Something is learned from every test or flight.LOX-Kerosene Rocket Launch at FAR Jan 15 2022mojaverockets2022-01-21 | Edited version of this video youtube.com/watch?v=TozU-No1F38 but including some pictures of the rocket preps. for more information: http://www.watzlavick.com/robert/rocketRobert Watzlavick LOX Kerosene Rocket Launchmojaverockets2022-01-16 | Successful launch and recovery of Robert Watzlavick's iquid bi-propellant rocket at the Friends of Amateur Rocketry facility in the Mojave Desert. For more information:http://www.watzlavick.com/robert/rocket and www.friendsofamateurrocketry.orgGenesis video cam 5mojaverockets2022-01-12 | Genesis liftoffRATT Works K-350 Tribrid motor test, Jan 9 2022mojaverockets2022-01-11 | 3rd of 3 tests of Dave Griffith's K-350 Tribrid motor with MtSAC instructor Martin Mason and students learning to use this motor. On this third test, the motor functioned in the hybrid mode only as the alcohol did not open properly 0:17 onward.Embry Riddle June 1 2019 at FAR-1030 Competitionmojaverockets2022-01-04 | Less than 3 seconds into the flight, Embry-Riddle lost their video cam on their launch for the 2019 FAR-1030 competition. The Video Cam was found on January 1st while people out on recovery for their rocket found the video cam...if you find rocketry things please notify us so we can return them to the owners. I was able to identify the team from my announcement of the launch. This is the recording from that launch. For information on the new FAR-51025 competition for 2022 see: secureservercdn.net/198.71.233.138/2af.f63.myftpupload.com/wp-content/uploads/2021/11/FAR-51025-Competition-June-3-5-2022.pdfGenesis hypergolic launch at FAR 2021mojaverockets2021-12-06 | Genesis project at the Friends of Amateur Rocketry facility in the Mojave Desert. This was the first time we used our new control center for launching. Big or small, fast or slow, we launch them all come join us with your next rocket. www.friendsofamateurrocketry.orgSpace Enterprise at Berkeley Nov 20, 2021 rocket motor test at FARmojaverockets2021-11-22 | This was the second of two successful LOX-Propane propellant tests at the Friends of Amateur Rocketry test/launch facility in the Mojave Desert. Motor specs: 2.69 kN, was designed for 2.75 kN, a 5-second burn in the morning and 7-second in the afternoon (seen in this video) - full duration will be in the realm of 15-18 seconds. Propane and LOx, chamber pressure designed to be about 375, and was around 350 psi in the tests.8 inch KNSB sugar motor CATOmojaverockets2021-11-22 | Second test of the 8" (200 mm) KNSB sugar motor November 20, 2021 test. This test used two long grains, the first test last month used three short grains. youtube.com/watch?v=Bdd-Et1LcNEUCLA LOX alcohol rocket motor test FAR Oct 16 2021mojaverockets2021-10-29 | A very successful liquid bipropellant rocket motor test by UCLA students at the Friends of Amateur Rocketry ( FAR ) facility in the Mojave DesertSS2S 8 200mm KNSB Rocket Motor Test at FARmojaverockets2021-10-03 | Preliminary data shows a maximum thrust of 2,000 pounds and an average of 950 pounds and a burn time of 15 seconds. We will static test this another time with a different propellant grain arrangement and then flight test the motor.L-1150 KNSB sugar tube fin rocket launch and recoverymojaverockets2021-09-06 | Fourth launch of this rocket with this 4-grain 4" KNSB L-1150 motor, the LAUNCH at 3:50 All the airframe, avionics bay, and fin can were made from a cardboard tube from a home improvement store. The first two launches were done with a $15 Eggtimer 'Apogee' deployment altimeter making the entire rocket, avionics, propellant less than $25 excluding the motor case and parachute that I already had. Download from the avionics shows 10 Gs and a top speed of 1,760 fps or Mach 1.52...not bad for a 4" cardboard rocket costing less than $25Half Cat liquid bi-propellant flight test at FARmojaverockets2021-07-27 | Test flight of the Half Cat rocket using nitrous oxide ( N2O ) and alcohol as the propellant at the Friends of Amateur Rocketry facility on April 3, 2021. Mojave Desert.5 Starbase TARC team practice flightsmojaverockets2021-06-14 | 5 Starbase TARC team practice flights at El Mirage Dry Lake on June 12, 2021 for the finals at Lucerne Dry Lake on Sunday, June 13, 2021. Most student rocket competitions are held outside California with the exception of the FAR-MARS prize, the FAR-1030, the FAR DPF (dollar per foot) challenge, and the FAR TCON event for TARC teams (not held in 2 years). We have been discussing other rocketry-oriented competitions or challenges for our youth, have something in mind? Let us know. For more information: The American Rocketry Challenge (TARC) rocketcontest.org NASA SLI nasa.gov/stem/studentlaunch/home/index.html ESRA IREC SAC soundingrocket.org/what-is-irec.html Friends of Amateur Rocketry friendsofamateurrocketry.org/launch-contestsMSAC Rocket Launch CATOmojaverockets2021-05-03 | 2019 MSAC catoUCI Rocket Project LOX LNG biprop rocket motor testmojaverockets2021-04-26 | Test of the University of California Irvine Rocket Project LOX/LNG motor at the Friends of Amateur Rocketry facility in the Mojave Desert April 17, 2021.Sugar Shot 8 inch April 17 2021 CATO cam 2mojaverockets2021-04-22 | Ignition at 4:20 in the video Test flight of the 8" (200mm) Sugar Shot to Space rocket and resulting CATO. Reached an altitude of 1,497'Eric Beckner 4 17 21 APCP CATOmojaverockets2021-04-21 | Eric Beckner's 98mm APCP N-impulse rocket motor test. Three different video cam views. Friends of Amateur Rocketry facility, Mojave DesertCal Poly Pomona UMBRA April 2021 testmojaverockets2021-04-20 | California State Polytechnic University Pomona static test fire of their 5" (125mm) APCP rocket motor for the FAR-1030 competition in June. For more information on FAR contests and challenges, see friendsofamateurrocketry.org/launch-contestsSS2S April 17 2021 cam 3 of CATOmojaverockets2021-04-20 | SS2S 8' (200mm) test flight using KNSB propellant in a fiberglass case bonded finocyl grain configuration. Motor CATOed after ignition. Rocket impact heard at 1:27 in video. video cam 3 of 4Eric Beckner April 17 2021 APCP motor CATO edited versionmojaverockets2021-04-20 | Eric Beckner experimental 98mm N-impulse APCP propellant motor test. UC Irvine was just about ready with their liquid Bi-prop motor test when I asked Eric at the bunker if there were any cameras on his test. He said no and asked if he wanted one...ran out there and was going to place it at the motor bulkhead but thought, sometimes APCP motors CATO so I placed it at a safe distance and ran back to the bunker. Countdown starts at 0:35 To see where the motor case went, see this video at 0:45 and at 1:55 youtube.com/watch?v=8wousLLepx4SS2S MSAC 125mm KNSB booster and dart March 6 2021 at FARmojaverockets2021-03-30 | Launch of the 55mm DART using a 125mm KNSB propellant booster to flight test the dart avionics and recovery systems. Loss of the booster fins early on in the flight resulted in the loss of the booster main chute but everything else was recovered. Dart recovery drogue and main deployed as planned and without damage.Paul Avery Tripoli handicap I-impulse record altitude attempt at MDARSmojaverockets2021-03-29 | Paul Avery Tripoli Rocketry Association handicapped I-impulse altitude record attempt using an Aerotech I-59 long-burning motor in his lightweight scratch-built rocket. Great flight Paul. Launch at 1:20 in the videoSugar Shot small scale 4 finocyl KNSB motor testmojaverockets2021-03-21 | Small scale test of our single finocyl grain for our up coming 8" (200mm) flight motor. Motor was slightly progressive, peak thrust was 300 pounds. Winds forced several flights at the facility to scrub for the day including our 8" flight to 98,000'. The small short burn 4" test was done instead. Test starts at 2:05 in the videoFebruary 27, 2021 Danjou Honest John Rocket Launch at MDARSmojaverockets2021-03-09 | Polecat Aero 5.5 Honest John. Aerotech K695 Redline. Dual Perfectflite computers... 3138’ and 3140’. Awesome straight flight... recovery approx 500’ from tower!Brinker March 6 2021 KNSB 98mm at FARmojaverockets2021-03-08 | Test launch of the 98mm KNSB propellant rocket that will serve as the booster for a 2-stage 98 to 75mm launch at the FAR facility, Mojave Desert. Perfect flight to 14,400' and a long but successful recovery in the winds.Sierra Vista Middle School NASA SLI Feb 20 2021 rocket launch at FARmojaverockets2021-02-21 | Despite the weather forecast for high winds, students from Sierra Vista Middles School braved the journey to the Friends of Amateur Rocketry facility to launch their NASA SLI full-scale rocket for a test flight of their avionics and recovery systems. After waiting hours for the winds to diminish (less than 20 mph needed to launch) the students got their window of opportunity and took full advantage.Single 98mm KNSB sugar propellant grain test Feb 6 2021mojaverockets2021-02-09 | Propellant and grain geometry test on a single 'J-impulse' KNSB grain on the new Sugar Shot to Space test stand at the Friends of Amateur Rocketry facility. The aluminum case motor used a steel nozzle as part of the testing project for a Tripoli study.MSAC 5 inch N-impulse KNSB sugar rocket Feb 6 2021mojaverockets2021-02-09 | Students from Mt San Antonio Community College came to the FAR facility on Feb 6, 2021 to test launch their 5" N-impulse KNSB 'sugar' rocket for the FAR-1030 competition in the 30,000' challenge to be held this June at FAR. The motor worked great but the launch terminated early when the rocket became unstable after losing a fin with about one second remaining on the motor burn. They will be rebuilding and back to test for the competition. The students previously fired this motor successfully last month. Liftoff in video at 1:20Jan 16 2021 FAR SS2S 8 inch testmojaverockets2021-01-26 | This was the last of 8 static tests of this 8" (200mm) fiberglass motor case. We originally thought this would be a single use motor case as the resin and fiberglass inside was being burned at the end motor end (and three CATOs). The purpose of this last test was to try out several mandrels for finocyl molding of the KNSB 'sugar' propellant core.Jan 2 2021 8 inch SS2S launch CATO video cam 3mojaverockets2021-01-05 | This was the 6th test, the first flight test, of the 8" fiberglass motor case. The original motor was 70+ pounds of KNSB propellant ( P-impulse )and resulted in a test stand motor failure (CATO) on July 4, 2020. youtube.com/watch?v=6JcD-VqpioE
The damaged section of that surviving motor case was cut off and a second static test conducted on August 1, 2020 that also CATOed. youtube.com/watch?v=ymHjWxVrTRc
The damaged portion was again cut off and a third test using 3 propellant grains was done resulting in a partial success (a burn through adjacent to the bulkhead). A forth test was conducted case bonding the propellant and was a success. youtube.com/watch?v=5DN_WXJWaLI
This was the sixth firing of the motor case with 50 pounds of propellant ( O-impulse ) that was originally planned to be single use. This firing was to be a flight test.SS2S Dec 19 2020 8 inch motor testmojaverockets2020-12-20 | The fifth test of this 8" (200mm) fiberglass case KNSB 'sugar' motor. The propellant in this test was case bonded with a 6 finocyl geometry core. Tested on our new Sugar Shot test stand nozzle down flight orientation that causes the exhaust to quickly block the view to cameras...we are working on a design add on to direct the 'smoke' off to one side. Our discussion is now about flight testing this same motor.8 inch (200mm) diameter sugar rocket motor test SS2S FAR sitemojaverockets2020-12-20 | December 5th Sugar Shot to Space static fiberglass case motor. This was the 4th test of this motor case. The first two tests CATOed, the third test suffered a burn through and tried to take flight. This fourth test was with the KNSB 'sugar' propellant case bonded. From our third back up video cam. We tested the motor yesterday, Dec 19, for the fifth time and are now considering flight testing this motor (will be the 6th time this fiberglass motor will have been fired). At the Friends of Amateur Rocketry facility (the FAR site) Mojave DesertDec 5 2020 Sugar Shot to Space 8 inch (200mm) static testmojaverockets2020-12-06 | Fourth test of this 8" (200mm) fiberglass motor case for the Sugar Shot to Space project. For safety in the event of a CATO, motor was buried in the ground for testing at the FAR site. A chain around the steel nozzle and staked to the ground was used to limit motor travel in the event of a failure. My thanks to the many past, present, and future volunteers that have helped with the Sugar Shot to Space project. Current active members include Martin Mason, Eric Beckner, Ryan Lau, Chris Covany, Davie Bauld and me.125 mm APCP rocket motor test by CCP Sept 5 2020 CATOmojaverockets2020-10-23 | Static test of 5 inch (125 mm) O-impulse APCP propellant by CPP at the FAR facilityBrinker 75mm KNSB static test Sept 5 2020mojaverockets2020-09-13 | Third successful static test of their 5-grain L-1000 KNSB 'sugar' motor at the Friends of Amateur Rocketry facility in the Mojave Desert. This same motor was then used to propel their rocket on this day to 12,000'+Brinker 75mm KNSB rocket launch Sept 5 2020mojaverockets2020-09-08 | Launch of Mike and Justin Brinker's L-impulse 75mm KNSB 'sugar' propellant rocket. This launch followed a successful static test of the same motor that morning. Altitude reached? 12,120' (3,694 m) Propellant cost was $15