This device makes Meshtastic the BEST off-grid tech Level 2 Jeff 2024-10-12 | Meshtastic is great! But it needs 'halo' devices like the T-Deck to expand beyond hobbyists.Here are all the things I used to build my custom T-Deck: - T-Deck / Black / 915 MHz: lilygo.cc/products/t-deck - 3.7V 5000 mAh battery 706090: amzn.to/4dDTQ1m - 915MHz LoRa antenna (whip): amzn.to/3BF6dNo - 915MHz LoRa antenna kits (stubbies): amzn.to/3U8xApr - Alley Cat T-Deck TD1 Case: printables.com/model/741124-lilygo-t-deck-td1-case-by-alley-catAnd here's the blog post where I go into more detail about the experimental T-Deck software:jeffgeerling.com/blog/2024/realizing-meshtastics-promise-t-deckPlease consider supporting the developer behind this new UI! github.com/sponsors/mverch67Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffContents:00:00 - Why Meshtastic?00:37 - Enter the T-Deck02:02 - The UI is trash03:44 - A better UI (with caveats)05:11 - The future of Meshtastic
Cheap 5Gb Ethernet Has Landed! Level 2 Jeff 2024-09-20 | 5Gb Ethernet is here! But it's not always easy. That might be fine if you use this WisdPi adapter.I bought the WisdPi 5G USB-C Ethernet Adapter straight from the wisdpi website: wisdpi.com/products/wisdpi-usb-3-2-5g-ethernet-adapter-wp-ut5-wired-lan-network-connection-for-mac-os-linux-windows-backward-compatible-on-5g-2-5g-1g-100mbps-ideal-for-gamingOther things I mentioned: - HackerGadgets: hackergadgets.com - Mikrotik CRS309-1G-8S+in 10G Switch: amzn.to/3XFM2X8 - Mikrotik S+RJ10 SFP+ 1/2.5/5/10G module: amzn.to/3XqGhMI - Windows iperf3 guide: jeffgeerling.com/blog/2023/testing-10-gbe-throughput-on-windows-iperf3-outdatedSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffContents:00:00 - WisdPi 5G Ethernet01:14 - macOS results01:38 - Windows results and Realtek driver install02:14 - Raspberry Pi results03:01 - Thermals03:11 - HackerGadgets NanoGbE Adapter04:49 - 1 Gbps out to be enough for anybody06:15 - Hold out for 10 Gbps?
Resurrecting my ancient MacBook Air with Ubuntu Linux Level 2 Jeff 2024-09-10 | I have an old 2010 Macbook Air. Apple dropped support for macOS on it years ago. Can Linux bring it back to life?After installing Ubuntu 20.04, the experience was mixed, but overall a lot better than I expected! What do you think of the FPV style for this video? Should I try to do some more like it?I recorded this video a few weeks ago, and am just getting around to uploading it today! I mentioned a couple other videos I was working on, which are out on my main channel: - Positron V3.2 3D printer build: youtube.com/watch?v=mTIwNMhFvOU&t=7s - Radxa X4 Intel SBC: youtube.com/watch?v=F2atAHDOaIA&t=196sSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffContents:00:00 - The patient05:00 - Attempt 1 - Ubuntu 24.0406:09 - Attempt 2 - Safe Graphics09:33 - Attempt 3 - Ubuntu 20.0411:44 - First boot13:15 - Modern Ubuntu on a Core 2 Duo15:51 - How do you right click?17:03 - Setting a solid color background18:06 - Slow but useful
Raspberry Pi has a new 2GB Pi 5, its $50 Level 2 Jeff 2024-08-19 | The title says it all, but I do have a few other updates in this brief video. The baby's due any day now, and I'll be taking things a little more slowly for a few weeks!Here's Raspberry Pi's announcement: raspberrypi.com/news/2gb-raspberry-pi-5-on-sale-now-at-50I quickly mentioned Argon's new Poly+ 5 case (argon40.com/products/argon-poly-5), which is sold out, hopefully they'll get another batch soon, and EDATECs IPC3020 fanless industrial Pi 5 PC (https://www.edatec.cn/en/elpc/ipc3020.html).Make sure you're subscribed so you don't miss any of the upcoming videos!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineering
Every YouTube creator should do this (most dont) Level 2 Jeff 2024-08-05 | Google's built-in closed captioning is trash. You should do this instead.Links to things I mentioned in the video: - My blog post on Whisper: jeffgeerling.com/blog/2023/transcribing-recorded-audio-and-video-text-using-whisper-ai-on-mac - MacWhisper: goodsnooze.gumroad.com/l/macwhisperSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - What00:49 - How03:23 - Why
When your case is more expensive than your computer Level 2 Jeff 2024-07-31 | The case costs $80, which is more than the price of the Pi I installed inside.Is it worth it? Find out in the video.Thanks to SunFounder for sending the Pironman 5: sunfounder.com/products/pironman-5-nvme-m-2-ssd-pcie-mini-pc-case-for-raspberry-pi-5Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - Accidental build montage00:46 - First (not) boot02:14 - Debugging the issue04:27 - More debugging06:25 - Now it actually boots08:03 - Setting up Pironman software09:04 - Camera Operator Jeff10:52 - RGB controls and dashboard16:19 - Would I buy it?16:55 - Two improvements for v6
Crowdstrike update leads to global BSODs Level 2 Jeff 2024-07-19 | Read Crowdstrike's statement (which includes instructions for fixing your computer, if you're affected): crowdstrike.com/blog/statement-on-windows-sensor-updateSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2Jeff
Fractals newest PC case is... free? (some assembly required) Level 2 Jeff 2024-07-18 | You can download Fractal's 'North Pi' design files here: fractal-design.com/north-pi-3d-filesWatch my earlier video on Pi 5 cases (including Fractal's prototype Baby North) here: youtube.com/watch?v=rV8v40MKFikHuge thanks to Fractal for not just burying the design, but listening to the community and releasing it in the wild!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffContents:00:00 - Fractal's Baby North (North Pi)03:13 - Slicing - Bambu Studio parts06:59 - Slicing - PrusaSlicer parts12:06 - We are printing!16:27 - Goopy PETG19:18 - Back to good ol' PLA21:06 - The blood sacrifice21:43 - Heat-set screw threads25:03 - Final assembly
Watch Me Build: Prusa MK4 3D Printer (Assembled) Level 2 Jeff 2024-07-05 | HUGE thanks to Josef Prusa for sending this printer to the studio. I originally hoped to use it on my Open Sauce project (watch here: youtube.com/watch?v=n5d0hzgA9BI), but it didn't arrive in time.There was an issue with the first prints, but thanks to some quick help via Twitter, we got it sorted!Prusa just announced they're manufacturing MK4 printers in the US, so hopefully that helps cut down on shipping-related issues like I had!See their blog post on USA manufacturing: blog.prusa3d.com/we-are-now-manufacturing-3d-printers-and-filaments-in-the-usa_99148And check out their site for more on the MK4 and all their Prusament filaments: prusa3d.comThey currently have a special deal on MK4 kits—free shipping and an extra warranty, plus a $100 voucher for future purchases. I don't get any referral revenue, just wanted to pass along a good deal when I see one :)Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - The MK4 Kit02:21 - Printer Setup06:10 - Calibration10:08 - Happy printing!12:22 - First Benchy13:30 - Layer Problems14:39 - Y-axis belt tension adjustment16:27 - Firmware upgrade17:03 - Second Benchy18:06 - Positron and the 3D Printer Wall18:35 - Third Benchy (problem solving!)
Watch Me Build: Bambu Labs P1S 3D Printer Level 2 Jeff 2024-06-28 | I had a 3D printing emergency. Entirely self-inflicted.I needed a supplemental 3D printer, FAST. I had 10 full PIZ Dispensers to print for Open Sauce (video on that, here: youtube.com/watch?v=n5d0hzgA9BI), and my two Ender 3s just weren't keeping up.Even with some amazing help from @stldenise, I wasn't going to finish my prints in time.So I ran to Micro Center right before closing time, bought the fastest printer they had in stock, and brought it home. This video chronicles my first time setting it up and printing a benchy.In the two weeks since recording this video, I've learned a _lot_ more about 3D printing. As someone who only casually 3D printed and was satisfied with an older Ender 3 V2 for years, things have come a LONG way!What 3D printer will I build next? A Prusa MK4, maybe? A Positron V3.2? A Voron??? Subscribe and we'll see...I bought my P1S Combo from Micro Center: microcenter.com/product/668656/bambu-lab-p1s-combo-(with-ams)-3d-printer (that's not an affiliate link!)Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - Step aside, Ender01:07 - Unboxing02:18 - Printer assembly06:56 - AMS Setup08:10 - Printer setup10:55 - Power On Self Test12:37 - Filament load in AMS13:19 - First print: Benchy!16:00 - Results
Remote controlling a Raspberry Pi at 38,000 ft Level 2 Jeff 2024-06-25 | Raspberry Pi Connect just added remote shell access for all Pis enrolled in the service, and it also supports older Pis now!Check out the full story from Raspberry Pi's blog: raspberrypi.com/news/raspberry-pi-connect-remote-shell-access-and-support-for-older-devicesAnd see my earlier video on Pi Connect: youtube.com/watch?v=mgbTNZD1VcwSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: @JeffGeerling 2nd Channel: @GeerlingEngineering
Watch Me Build: Ender 3 S1 3D Printer Level 2 Jeff 2024-06-15 | I bought this printer almost a year ago, and it's been sitting in a box. I needed it for a project at Open Sauce, so assemble it I must!Here are links to a couple things I mentioned: - Creality Ender 3 S1: amzn.to/3L4Mpoh (Micro Center has a better deal right now though, if you're in the US) - Husky workbench with drawers: homedepot.com/p/Husky-52-in-W-x-24-in-D-Steel-2-Drawer-Adjustable-Height-Solid-Wood-Top-Workbench-Table-in-White-HOLT5202BJ2/311742117Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffContents:00:00 - Unboxing05:31 - Building the printer25:26 - Bed leveling34:43 - Failed first print, more bed leveling42:37 - Print success, time for Open Sauce!
I built a MONSTER AI Pi with 8 Neural Processors! Level 2 Jeff 2024-06-05 | The thumbnail about says it all. It works! But what does that mean, exactly?Some of the things I mentioned in this video: - Alftel 12x PCIe Card: pipci.jeffgeerling.com/cards_m2/alftel-12x-pcie-m2-carrier-board.html - ThirdReality Zigbee Smart Plug: amzn.to/3X97MvC (affiliate link) - Pi AI Kit: raspberrypi.com/products/ai-kit - Hailo-8: hailo.ai/products/ai-accelerators/hailo-8-ai-accelerator - MidnightLink's helpful Coral TPU setup instructions: github.com/geerlingguy/raspberry-pi-pcie-devices/issues/648#issuecomment-2145836307 - CodeProject.AI: codeproject.com - Raspberry Pi Linux PCIe issue: github.com/raspberrypi/linux/issues/6206Today's YouTuber outtro tribute: Chris Titus TechSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - You built a WHAT?00:45 - The hardware stack02:26 - Power monitoring03:06 - Getting Coral and Hailo to work05:44 - 55 TOPS!06:30 - Not so fast...
This Raspberry Pi sees in the dark Level 2 Jeff 2024-05-22 | ArduCam sent me their Pivistation 5 cameras, which are Pi 5s and Pi cases mashed up with three of their nicest camera modules, paired up with some nice lenses.You can read more about the specs on their Kickstarter: kickstarter.com/projects/arducam/pivistation-5-your-all-in-one-raspberry-pi-5-camera-kitWARNING: If you back the Kickstarter, there is no guarantee anything will ever ship to you. It is not the same as purchasing a product. I call it out in the video, I'm calling it out here... I don't think ArduCam will have any trouble manufacturing these cameras, but you've been warned!(I also don't know why they feel the need to do a Kickstarter, these cameras could just be sold on their existing store, and it's not like they set a high goal...).I also mentioned a couple other things in this video: - My ArduCam Hawkeye camera module review: jeffgeerling.com/blog/2022/64-megapixel-hawk-eye-brings-high-res-imaging-pi - AXIS 212 PTZ IP camera with fisheye lens: ebay.com/sch/i.html?&_nkw=axis+212+ptzSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringContents:00:00 - A word on Kickstater00:47 - Hawkeye01:43 - Darksee03:00 - Klarity04:25 - Darksee teardown06:44 - Cheap-o tripod07:30 - Testing Darksee10:51 - All sky fisheye12:56 - Testing Klarity15:34 - A microphone is a person - Pytorch demo16:57 - Good hardware, odd KickstarterEnd YouTuber reference: ServeTheHome
Raspberry Pi goes to IPO: What does it mean for Makers? Level 2 Jeff 2024-05-15 | Raspberry Pi just announced an 'Intention to Float'. What can we learn from the latest release from the London Stock Exchange?Read the full document here: londonstockexchange.com/news-article/market-news/expected-intention-to-float/16470316And see my earlier thoughts on the IPO here: jeffgeerling.com/blog/2024/raspberry-pi-ipo-selling-outSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@UCR-DXc1voovS8nhAvccRZhg 2nd Channel: youtube.com/@UCsd6hP-zzIkCpw8XGw7OsywEnd YouTuber reference: @NovaspiritTech
I NEVER thought Id see this Level 2 Jeff 2024-05-11 | The aurora (northern lights) reached as far south as Texas last night—maybe calling them 'northern lights' is a bit of a stretch.In the midst of a G5-level solar storm, where hundreds of gigajoules of magnetic energy was bombarding our atmosphere, people around the world witnessed a beautiful display of light and color.I was lucky enough to have clear skies in St. Louis, MO, so here's a video with some of the footage I took.There's a chance the aurora will reach down into the US again tonight (May 11, 2024), so don't miss it! If it's after that day, or you're too far south to see it (or too far north... some people saw it in Australia!), then hopefully my video will give you some idea what it was like!A couple of the sites I use to follow solar weather: - Solar Ham: solarham.com - NOAA 30-minute Aurora Forecast: swpc.noaa.gov/products/aurora-30-minute-forecast - NOAA Space Weather Prediction Center: swpc.noaa.govSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/@JeffGeerling2nd Channel: youtube.com/@GeerlingEngineeringHuge thanks to my Dad for sending me his photos (the thumbnail is a photo he took near the Missouri River north of St. Louis, MO).End YouTuber reference: @ExplainingComputers
Northern Lights - Aurora Borealis 2024 from St. Louis, MO USA Level 2 Jeff 2024-05-11 | I took this video right after dusk in St. Louis, MO, USA, during the aurora that was visible as far south as Alabama!Nature is truly beautiful... and it's crazy to think there is so much energy being absorbed by our atmosphere. I'm glad we have it to protect us :)
Remote video call desk setup: PRO TIER Level 2 Jeff 2024-05-09 | On Zoom calls I'm often asked how I get such a nice, sharp picture and crisp, clear audio. There's no secret, just a decade spent optimizing every part of my desk setup to make it fast, easy, and pro-quality!Things I mentioned in this setup (links are affiliate links): - OBS: obsproject.com - Sony a6600: amzn.to/3JWnxhC - Sony ZEISS 24mm f/1.8 lens: amzn.to/4bNRVab - Sony a6600 AC dummy battery pack: amzn.to/4dvDRnc - ThirdReality Zigbee Smart Outlet: amzn.to/3JTrQdD - Home Assistant Yellow: home-assistant.io/yellow - StreamDeck Home-Assistant Plugin: github.com/cgiesche/streamdeck-homeassistant - Utilitech background 4' LED light: lowes.com/pd/Utilitech-4-ft-Light-LED-Linear-Shop-Light/5000858985 - Logitech Brio 4K Webcam: amzn.to/3UCePu4 - Manfrotto 196B-2 Articulated Arm: amzn.to/3UtDpgy - Manfrotto 2909 Super Clamp: amzn.to/4b81EIo - SGM-250CX Compact Shotgun: amzn.to/4dJ7yRY - Rode SM4-R Rycote Lyre Shockmount: amzn.to/3UBMOCI - HUANUO Monitor Stand Desk Mount: amzn.to/3WA1NQj - Behringer UMC202-HD USB Audio Interface: amzn.to/4acTFs4 - Elgato Prompter: amzn.to/3wDVGzI - Glide Gear TMP100 Teleprompter: amzn.to/3wzHQhO - Elgato Cam Link 4K: amzn.to/3wvfRjn - Manfrotto 244 Variable Friction Magic Arm: amzn.to/4bam1oi - Rogue Amoeba Loopback: rogueamoeba.com/loopback - Rogue Amoeba Audio Hijack: rogueamoeba.com/audiohijackSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/@GeerlingEngineering3rd Channel: youtube.com/@Level2JeffEnd YouTuber reference: @geraldundone
Tiny Pi NAS: Its impossible to recommend Level 2 Jeff 2024-05-04 | The X1011 is a quad NVMe Raspberry Pi NAS board. With a few compromises.I can't recommend it... but I also can't _not_ recommend it. It's complicated; let me explain!Things I mentioned in this video (some links are affiliate links): - Geekworm X1011: geekworm.com/products/x1011 - FriendlyElec CM3588: friendlyelec.com/index.php?route=product/product&product_id=294 - LTT Video on CM3588: youtube.com/watch?v=QsM6b5yix0U - Inland TN320 256GB NVMe SSD: microcenter.com/product/661858/inland-tn320-256gb-ssd-nvme-pcie-gen-30x4-m2-2280-3d-nand-tlc-internal-solid-state-drive - Argon THRML 30mm Active Cooler: amzn.to/3WrpR7K - Argon PWR GaN 27W USB-C charger: amzn.to/4b390wI - The ULTIMATE Pi 5 NAS (SATA): youtube.com/watch?v=l30sADfDiM8 - Big NAS, Lil NAS: youtube.com/watch?v=D8EIs8s303kSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/c/JeffGeerling2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - The Good, The Bad, and The Ugly00:57 - The Good01:33 - The Bad03:41 - The Ugly05:50 - Thermals06:40 - Price and Value (ft CM3588)End YouTuber reference: @greatscottlab
Say Hello to My Little Rack! Level 2 Jeff 2024-04-30 | 10" mini racks are awesome—at least I think so! DeskPi just launched a new line of 10" gear perfect for smaller portable equipment or homelabs, and I'm loading one up with my Pi clusters!Disclaimer: DeskPi sent me the RackMate T1, and MyElectronics sent me the two Mini ITX cluster cases (though I purchased the Pi cluster, Pis, and Turing Pi 2 that I fitted inside!).Things I mentioned in this video (some links are affiliate links): - Setting up the Turing Pi 2 + RK1 cluster (video): youtube.com/watch?v=h6zt8KeXFdA - DeskPi RackMate T1 (US): amzn.to/44dfYww - DeskPi RackMate T1 (UK): amazon.co.uk/dp/B0CS6MHCY8 - Deskpi RackMate T1 (DE/EU): https://www.amazon.de/dp/B0CS6MHCY8 - MyElectronics single ITX rackmount enclosure: https://www.myelectronics.nl/us/10-inch-2u-mini-itx-case.html - MyElectronics dual ITX rackmount enclosure: amzn.to/3UxidYa - DeskPi Super6C: amzn.to/3UuBLMW - Turing Pi 2: turingpi.com/product/turing-pi-2-5 - Turing RK1: turingpi.com/product/turing-rk1/?attribute_ram=8+GBSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/c/JeffGeerlingContents:00:00 - RackMate T103:10 - Turing Pi 2 IO Shield05:25 - DeskPi Super6C Cluster07:54 - Things get wild on the 3rd channel08:15 - Patch panel and 1U dual SBC mount12:33 - A Tiny Homelab
Installing a dome security camera on an exterior block wall Level 2 Jeff 2024-04-24 | How I installed an exterior security camera on the rear block wall at my new studio, and wired it up with PoE into my Raspberry Pi Frigate NVR.Some of the things I mentioned (some links are affiliate links): - Hikvision 2MP Dome camera: amzn.to/3S8o2Kv - Video where I set up my Pi Frigate NVR: youtube.com/watch?v=7wkVGcdI2vk - PC110 WMS Wall Mount Bracket for Dome camera: amzn.to/4b6UyDs - PC110 WMS Back Box for Dome Camera Bracket: amzn.to/3xK2tIo - Duct Seal: amzn.to/4bsiSQz - DeWalt 20V Max Rotary Hammer: amzn.to/4aMBjzq - Wire fish rods (I wish I had): amzn.to/3w7aRRT - 500 ft StarTech.com Cat5e Plenum Cable: amzn.to/3QhxTME - Gator Frameworks Patch Cable Holder: amzn.to/3QjUzfj - TRENDnet Shielded RJ45 Keystone Jacks: amzn.to/4bbiZzw - Neat Patch Mini 1U Cable Management Unit: amzn.to/3U7YD3oSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/c/JeffGeerlingContents:00:00 - Dome camera mount00:29 - Running Cat5e through the plenum01:49 - Mounting the exterior box05:19 - Fishing the wire08:20 - Sealing the hole09:30 - Camera assembly and prep10:46 - Mounting the camera11:47 - Routing the cable into the network rack13:36 - Patching and labeling14:56 - It works!
Quick review: Infiray P2 Pro thermal IR camera Level 2 Jeff 2024-04-17 | Xinfrared sent me their P2 Pro thermal IR camera for testing after I spoke to them at CES 2024.The product was sent to me for testing, they did not pay for this video, nor did they have any input into its content or preview of it prior to my posting.You can find out more about the P2 Pro on their website: xinfrared.com/products/infiray_p2_pro_thermal_cameraIf you want to support the channel you can use my affiliate link to purchase the model I am using: amzn.to/4d1WnDjSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.comMain Channel: youtube.com/c/JeffGeerling
Baileys Beads and Diamond Ring - 2024 Total Solar Eclipse Level 2 Jeff 2024-04-11 | 30 second clip of Bailey's Beads and Diamond ring, at the end of totality. This view also shows some massive prominences that were visible during the April 8, 2024 Total Solar Eclipse over parts of North America.
