WilmerWoodWorks
Get Ready for the EASIEST Laser Christmas Ornament Tutorial EVER!
updated
In this video, I’ll take you through the process. Starting with the design phase, I used my trusty Creality Falcon2 12w laser to intricately cut the Corvette’s silhouette onto 3mm basswood plywood. To add depth and dimension to the piece, I cut out a second silhouette and laminated both pieces together, resulting in a 6mm thick relief.
But the craftsmanship doesn’t stop there. I then mounted these elegant cutouts onto a striking piece of padauk wood—a remnant from a previous project that’s been waiting for its moment to shine. The rich, warm hues of the padauk beautifully complement the laser-cut basswood, creating a stunning visual contrast that truly makes the plaque pop.
This video is more than just a tutorial; it’s a journey of creation, showcasing how a simple piece of wood can be transformed into a meaningful and stylish work of art. Whether you’re a seasoned woodworker or just someone who appreciates the beauty of handcrafted items, you’ll find inspiration and joy in this celebration of craftsmanship and family.
So, grab your safety glasses, and let’s get started on this woodworking adventure together!
Chapters:
00:00:00 - Building a Temporary Work Table
00:01:00 - Using Screws in Projects
00:01:49 - Using the Laser Engraver
00:02:43 - Moving and Upgrading the Laser Engraver
00:03:37 - Building a Temporary Platform for Laser Engraving
00:04:23 - Setting Up the Worktable
00:05:37 - Temporary Solution for Holding Cutting Boards in Place
00:06:33 - Using Clamps for Laser Engraving
00:07:28 - Modifying a Tool
00:08:21 - What I've Been Up To
1. Wash the Cutting Board:
Clean the cutting board thoroughly using soap and water or run it through the dishwasher (use the sanitize setting).
Remove any food particles and let the board air dry.
2. Sand the Cutting Board:
Once dry, sand the cutting board to create a smooth surface for the sealant to adhere to.
3. Apply Mineral Oil:
Use food-grade mineral oil.
Dip a clean cloth or very fine steel wool pad into warm mineral oil.
Rub the oil into the board, following the grain.
Liberally coat all surfaces, including the top, bottom, and side edges.
For a new cutting board, apply four to five coats of oil, allowing each coat to soak in.
4. Wipe Off Excess Oil:
Let the mineral oil soak into the wood for at least 30 minutes.
Wipe away any excess oil.
Remember to reapply mineral oil every few weeks to maintain your cutting board’s longevity and hygiene. Happy cooking! 🍽️🔪
Recently, I received an invitation to a birthday celebration, and I wanted to bring something truly special. Time was ticking, but I had an edge grain cutting board blank already glued up—my canvas for creativity. With just a few precious hours, I set out to transform it into a memorable gift.
🔧 From Glue Squeeze to Precision Cuts
First things first: I meticulously cleaned up the glue squeeze-out using my trusty hand plane. Next, I ran the board through my planer multiple times, ensuring a smooth and even surface. To square up the ends, I turned to my reliable radial arm saw—a tool that never lets me down.
🔍 Juice Grooves: The Elusive Detail
Ah, the juice grooves—the bane of my previous cutting board endeavors. But this time, fate smiled upon me. A helpful commenter pointed me toward @3x3CustomTamar's video, where she masterfully demonstrated various techniques for adding those elusive grooves. Armed with newfound knowledge, I tackled the task, and voilà! Perfectly executed juice grooves.
🛠️ Temporary Jig, Lasting Results
While I’m considering a more permanent jig for future boards, my makeshift solution worked like a charm. Sometimes, ingenuity trumps complexity. With the grooves in place, I moved on to the pièce de résistance.
🔥 Laser Engraving Magic
Enter my brand-new Creality 12w laser. In just about 30 minutes, it etched a personalized design onto the board, infusing it with character and sentiment. The corners received a gentle rounding, and a thorough sanding session followed suit. Finally, a generous application of mineral oil brought out the wood’s natural beauty, and sturdy feet ensured stability.
⏰ Race Against Time
The clock was ticking—we were due at the party in 20 minutes! But fear not—the cutting board was ready. It graced the celebration, and the very next day, it found its purpose in the kitchen.
🌟 Conclusion
Crafting under pressure can yield remarkable results. So, whether it’s a birthday bash or any other occasion, remember that creativity knows no bounds—even in the eleventh hour.
----------------------------------------------------------------
Chapters:
00:00:00 - Setting up for the Perfect Gift
00:01:00 - Woodworking Projects and Juice Grooves
00:01:53 - Highly Informative Video on Lining up Boards
00:02:44 - Improving my skills in screwing juicer parts
00:03:35 - Using Carpet Tape in the Workshop
00:04:24 - Laser engraving and routing a handle
00:05:21 - Router Troubles and Cutting a New Blank
00:06:24 - Customizing with a Laser Engraver
00:07:23 - Laser Engraving on the Board
00:08:16 - Updates on the Laser Engraver
----------------------------------------------------------------
Tools used:
Pipe Clamp – amzn.to/48Bthr0
Hand Plane – amzn.to/3uNnK2O
Dewalt Planer - amzn.to/3IgpjcU
Radial Arm Saw - no link - FB Marketplace
Trim Router - Craftsman - amzn.to/3V28I3M
Combination Square - amzn.to/42YPXQP
Carpet Tape - amzn.to/3IzhW0l
Tape Measure - Craftsman - amzn.to/4bPUJEq
Laser Engraver - Creality 12w - amzn.to/3wt5SuB
Craftsman Scroll Saw - no link
Pattern Router bit - amzn.to/3TevvZ9
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
The laser came with a micro card that had a test cut file, which I ran successfully on a piece of wood. I was amazed by how fast and precise the laser was, and how clean and smooth the cut was. The laser also produced very little smoke or dust, which made the process more pleasant and safe. I also downloaded an online cut file and tried it on the same material, and it worked great with just two passes. The laser was able to cut through the wood effortlessly and accurately, and it also engraved some text and graphics with high resolution and contrast.
I am very happy with the performance and the power of the 12w laser, and I look forward to learning more about the software and the possibilities of this machine. The laser has a user-friendly interface and a lot of features that allow me to customize and optimize my cuts and engravings. The laser also has a built-in air assist that blows away the debris and cools down the material, which improves the quality and durability of the cuts and engravings.
The best part is that I can upgrade this laser to a 40w one if I ever need more power, since the frame is the same for both models. This gives me more flexibility and scalability in my woodworking projects, and also saves me money and space. I highly recommend the Creality Falcon 2 12w laser to anyone who wants to add some creativity and precision to their wood projects, or to anyone who wants to explore the world of laser cutting and engraving.
If you have any questions or comments about the Creality Falcon 2 12w laser, or about laser cutting and engraving in general, please feel free to leave them below. I will be happy to answer them and to share more tips and tricks with you. Thank you for watching and happy laser cutting!
Chapters:
00:00:00 - Unboxing the Creality Falcon 2 12 Watt Laser Engraver and Cutter
00:00:45 - Choosing Between the 12W and 10W Pro
00:01:23 - Unpacking the Frame Assembly
00:01:55 - MDF Unit and Feet Extensions
00:02:33 - Hooking up the Laser Beam
00:03:10 - Changing modules on a laser engraver
00:03:42 - Engraving with a Class 4 Laser
00:04:26 - Laser Engraver Troubles
00:05:05 - Testing the Cut Files on Scrap Material
00:05:39 - Adding Personal Touches with Engraving
00:06:10 - Demonstrating the Laser Power
00:06:51 - Impressed with the Setup
00:07:23 - Ending and Thanking the Viewers
Video Links:
Creality Falcon 2 Laser - https://s.zbanx.com/r/n0sjG1KHTyvs
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#woodworking #diy #weekendwarrior #woodwork #wood #easybuild #crafting #maple #walnut #landingnet #handmade #woodworking #woodcraft #gifts #christmasgifts #makers #woodworkers #crafters #etsy #handcrafted #homemade #wood #fishing #creative #artisan #handmadegifts
One of the problems was a router bit that slipped and damaged the juice groove, which is an important feature of the cutting board that prevents the juices from spilling over. The damaged groove made the board less effective and less appealing. Another problem was a handle that was not smooth and even, which made it uncomfortable and unsafe to use. The handle also affected the balance and stability of the board, which made it wobbly and unstable. Finally, there was an off-center juice groove that made the board look asymmetrical and unprofessional.
Despite these problems, I didn’t give up on the project. Instead, I learned from my mistakes and tried to find solutions to avoid them in the future. I researched different techniques and tools that could help me to make a better edge-grain cutting board, such as using a different router bit, sanding the handle more, and measuring the groove more accurately. I also consulted with other woodworkers and watched more videos on the topic to get more ideas and inspiration.
In a future video, I will share these tips and tricks with you, so that you can avoid the same mistakes and make a perfect edge-grain cutting board. I will also show you how to use some of the tools and techniques that I learned, such as using a router table, a belt sander, and a hand plane. I hope you can subscribe to my channel and hit the bell icon, so that you don’t miss this video and other exciting content. Thank you for watching and happy woodworking!
Chapters:
00:00:00 - Introduction to the Edge Graen Cutting Board Project
00:01:02 - Milling and Cutting Lumber
00:02:01 - Cutting and Preparing the Boards
00:03:01 - Cutting and organizing pieces
00:04:14 - Making the Process Easier
00:05:12 - Making a Sled for the Planer
00:06:13 - Making a Permanent Jig for Uneven Boards
00:07:06 - Fixing the Gouging on the MDF
00:07:58 - Using the router and routing jig
00:08:49 - Attempting to replicate the Butcher Block cutting board
00:09:45 - Trying a Different Handle Solution
00:10:39 - Adding Mineral Oil
00:11:31 - Final Pictures of the Project
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#EdgeGrainCuttingBoard #WoodworkingMistakes #RouterBitProblems #HandleSandingTips #JuiceGrooveAccuracy #WoodworkingSolutions #WoodworkingInspiration #RouterTableTechniques
#cuttingboard #woodworking
I have always wanted to try this push block, but I was hesitant to buy it for myself because of its high price. It costs around $60, which is quite expensive for a push block. However, I was lucky enough to get it as a gift from someone who knows how much I love woodworking. I was very grateful and excited to use it.
When I first opened the box, I was a bit nervous about the 3D aspect of the push block. I wondered if it would be complicated to assemble and use, or if it would be too bulky or heavy. But as soon as I took it out of the box, I was impressed by how sturdy and well-thought-out it was. The push block came with a clear and detailed instruction manual that showed me how to put it together and how to adjust it for different types of cuts. It was very easy to follow, and it only took me a few minutes to set it up.
To test the push block, I decided to use it for some test cuts that I needed to make for an upcoming edge grain cutting board project. I had some pieces of walnut and maple that I wanted to cut into strips and then glue them together. I used the push block to push the wood through the table saw, and I was amazed by how smoothly and accurately it worked. The push block gave me a lot of control and stability, and it prevented any kickback or slipping. The push pads gripped the wood firmly and did not leave any marks or scratches. The push block also protected my fingers and hands from the blade, which made me feel more confident and safer.
I was very happy with the performance and quality of the push block. It made my cutting process much easier and faster, and it improved the results of my work. The push block was definitely worth the price, and I would recommend it to anyone who is looking for a reliable and versatile push block. I can't wait to use it for more woodworking projects in the future.
Chapters:
00:00:00 - Unboxing the Micro Jig Gripper
00:01:05 - Assembly and Upgrades for the Gripper 200
00:01:53 - Securing the Main Base
00:02:46 - Assembling the Screws and Additional Support
00:03:35 - Making an Edge Grain Cutting Board
00:04:17 - 3D Printing and ABS Material
00:05:00 - Review of the Push Stick
00:05:42 - Subscribing and liking the content
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Microjig GRR-Ripper GR-100: amzn.to/3UqD1kB
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#MicroJigGR100 #PushBlock #TableSaw #Router #Jointer #WoodworkingTools #SafetyFirst #PrecisionCutting #WoodworkingGifts #EdgeGrainCuttingBoard #microjig #GR100 #GRR-Ripper
For my second cutting board, I wanted to use some leftover material from my landing net projects. I had some pieces of walnut, cherry, and maple that I thought would look great together. I planned to glue them in a striped pattern and then cut them into a rectangular shape. However, this project was more challenging than I expected. I had never made a cutting board before, so I had to learn how to align, clamp, and glue the wood pieces properly. I also had to be careful not to damage the wood or the tools when cutting and sanding. I made a few mistakes along the way, such as cutting the board too short and sanding too much. These errors reduced the size and quality of the board, but I managed to fix them as best as I could. The board was a bit smaller than I hoped, but it still looked great and had a nice contrast between the dark walnut and the light maple. I applied some mineral oil to protect and enhance the wood, and then I admired my work. I was proud of myself for completing this project and learning from my mistakes. I now have a better understanding of the process and the skills involved in making a cutting board. I am hopeful that the next boards will come out even better and that I will improve my woodworking abilities.
Chapters:
00:00:00 - Introduction to Woodworking with Steve and Wilmer
00:00:56 - Woodworking progress
00:01:47 - Face Grain Gluing
00:02:37 - Cleaning and Preparing the Wood
00:03:29 - Gluing the Pieces Together
00:04:38 - Securing the Pieces with Clamps
00:05:32 - Sanding and Cleaning the Wood
00:06:25 - Round over the board edges
00:07:31 - Sealing the Board with Mineral Oil
00:08:33 - Finishing the Board with Food-Safe Oil
00:09:22 - Subscribe to Support the Channel
00:10:16 - Installing Rubber Feet
00:11:11 - Video Wrap-Up
Do you want to make your own butcher block cutting board from scratch? In this video, I will show you how I did it step by step. You will learn how to cut it, glue it, clamp it, sand it, and finish it. You will also learn some tips and tricks to make your cutting board look amazing and last longer. This is a fun and easy project that anyone can do with basic woodworking tools and skills. You will end up with a beautiful and functional cutting board that you can use in your kitchen or give as a gift. Watch the video and unleash your inner craftsman!
Chapters:
00:00:00 - Cutting Board Project
00:00:36 - Woodworking Project: Restoring a Damaged Piece of Wood
00:01:11 - Making the Juice Group
00:01:52 - Using a plunge router to create a groove in a board
00:02:31 - Using the plunge router and bearing
00:03:16 - Attempting to Remove the Routing
00:03:53 - Cleaning up the groove by hand
00:04:36 - Modifying the Router Table
00:05:13 - Router Table Mishaps
00:05:52 - First Experience with a Large Cutting Board
00:06:37 - Grooves and Sanding
00:07:35 - Making a Custom Cutting Board
00:08:12 - Video Recap
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#woodworking #diy #handmadegifts #cutting board diy #wood cutting board #how to make a cutting board #cutting boards #DIY #Cutting board
If you're in the market for a budget-friendly workshop, then the Harbor Freight 60in Yukon Workbench is perfect for you! In this unboxing and assembly video, we'll show you how to assemble the workbench and unpack the contents.
This workbench is perfect for small home projects or use in the shop. We love that it's both sturdy and easy to assemble, making it a great option for anyone looking for a quality budget-friendly workbench!
Product:
60" Yukon Workbench - bit.ly/3vIyyiW
----------------------------------------------------------------
Video Chapters:
00:00 Introduction
00:17 Unboxing
02:35 Hardware Pack
02:26 Suggestion for assembly
03:39 Assembling legs
04:13 Installing lower shelf
04:53 Installing drawer slides to top
05:05 Attaching Top to sides
05:52 Drawer Assembly
08:15 Drawer Installation
08:46 Vise Installation
08:58 Large Drawer Assembly
09:36 Closing
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
Chapters:
00:00:00 - Building the Landing Nets
00:01:10 - Setting up the table saw
00:02:28 - Making Bottle Openers from Extra Wood
00:03:39 - Using the Craftsman tool for quick cuts
00:04:58 - Shaping the Material
00:05:58 - The First Time I Tried This
00:07:23 - Gluing the Mold
00:08:39 - Sanding the Handle
00:09:54 - Shaping and Sanding the Material
00:11:24 - Measuring and Marking the Holes
00:12:37 - Testing the Netting Spacing
00:13:47 - Applying Polyurethane to the Project
00:14:53 - Subscribe and Thanks
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#woodworking #diy #weekendwarrior #woodwork #wood #easybuild #crafting #maple #walnut #landingnet #handmade #woodworking #woodcraft #gifts #christmasgifts #makers #woodworkers #crafters #etsy #handcrafted #homemade #wood #fishing #creative #artisan #handmadegifts
In this captivating video, join us as we embark on a mesmerizing journey of crafting exquisite landing nets out of premium maple and walnut wood, just in time for the holiday season. Watch as I meticulously shape, carve, and assemble these impressive nets by hand, enhancing their natural beauty and durability. Looking for unique Christmas gifts that perfectly blend aesthetic appeal and functionality? Look no further! Our stunning Maple & Walnut Landing Nets are the ideal choice for any outdoor enthusiast or angler. Designed to effortlessly handle the toughest catches while exuding timeless elegance, these nets are bound to become cherished possessions for years to come. Each piece is crafted with utmost care and attention to detail, ensuring the highest possible quality. The contrasting tones and grain patterns of the rich maple and luxurious walnut create an exquisite visual harmony that is truly unmatched. These nets are not only practical tools for any fishing adventure but also stunning works of art that you'll be proud to display. Whether you're an avid angler seeking a reliable and stunning fishing tool, or someone on the hunt for a truly unique gift for your loved ones, our Maple & Walnut Landing Nets are the answer. Experience the joy of presenting a handcrafted, personalized gift that will make this Christmas truly memorable. So why wait? Explore our collection now and make this holiday season unforgettable with our exquisite Maple & Walnut Landing Nets.
----------------------------------------------------------------
Video Chapters:
00:00 Introduction
00:28 - Woodsmith Plans
00:38 - Starting Making the Jig
00:53 - Cutting down MDF
01:42 - Attaching Pattern
02:04 - Making Mirror Patterns
02:32 - Cutting Pattern on Bandsaw
03:00 - Sanding down Pattern
03:32 - Clamp Relief Holes
04:34 - Making Inner Form
07:42 - Gluing Inner Form Clamping Guide
08:07 - Coring out Clamping Guide
08:45 - Temporarily Attaching Handle Form
09:10 - Making Outer Form
10:19 - Sanding Jig
10:33 - Applying Clear Coat
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#woodworking #diy #weekendwarrior #woodwork #wood #easybuild #crafting #maple #walnut #landingnet #handmade #woodworking #woodcraft #gifts #christmasgifts #makers #woodworkers #crafters #etsy #handcrafted #homemade #wood #fishing #creative #artisan #handmadegifts
----------------------------------------------------------------
Hardware:
Bottle Opener Insert - amzn.to/47AXoPI
Trim Hinge Mortising Router Bit - amzn.to/4a1mNnl
----------------------------------------------------------------
Video Chapters:
00:00 Introduction
00:24 Cutting Walnut
00:53 Cutting Maple Accent Strips
01:03 Layout & Sanding
01:13 Glue up
01:35 Day 2
01:56 Sanding
02:21 Drilling for opener hardware & relief
02:37 *Router bit to clean up hole
03:01 Cutting to shape on scroll saw
03:45 Applying butcher block finish
04:05 Added Magnet
04:28 Closing
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
----------------------------------------------------------------
My Thin Rip Jig:
Watris Veiyi Thin Rips Table saw Jig - amzn.to/3N6FImS
----------------------------------------------------------------
Video Chapters:
00:00 Introduction
00:48 Installation
01:09 Modifying to fit
02:05 Cutting Walnut
03:35 Final Thoughts
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
Thanks for watching! If you have any questions please leave them in the comments.
Please click the link below to subscribe if you haven't already.
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
----------------------------------------------------------------
Video Chapters:
00:00 Intro
02:00 Pro Number 1
02:16 Pro Number 2
02:31 Pro Number 3
02:55 Pro Number 4
03:13 Pro Number 5
03:32 Pro Number 6
03:56 Pro Number 7
04:32 Con Number 1
05:01 Con Number 2
05:48 Con Number 3
06:20 Con Number 4
07:20 Con Number 5
08:03 Final Thoughts
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #garage #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e #setup #DIY #easy
Thanks for watching!
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Tools used:
Tape Measure – 25’ Craftsman - amzn.to/47JxwRu
Marker – Milwaukee Inkzall - amzn.to/3OJvUxE
Speed Square – Johnson Level & Tool - amzn.to/3HYxs4p
Radial Arm Saw - Craftsman Professional
Jointer - Craftsman Professional
Planer - Dewalt - amzn.to/3QBgJZF
Drill – Craftsman 20v - amzn.to/3NjZBUM
Jigsaw - Craftsman 20v - amzn.to/3FXX1CJ
Belt Sander - Makita - amzn.to/464KJmE
Orbital Sander - Craftsman 20v - amzn.to/40BMiak
Pocket Hole Jig - Kreg - amzn.to/3QUIGNy
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:26 Prepping & painting Hutch
00:52 Drawer faces painted
01:02 Painting Cabinets in place
01:12 Installing Dado blade on RAS
01:36 Measuring and cutting groove
02:52 Scribing panel to the wall
04:17 Cutting down boards for counters
05:01 Using Jointer to clean up the edge
05:15 Planing boards
06:22 Pocket holes
06:54 Glue-up
07:35 Test fit
07:45 Cutting to final length
08:06 Sanding
08:22 GEL STAIN *WHAT A MESS!*
08:33 Sanding again
08:43 Staining - Special Walnut
08:55 Staining - Ebony
09:20 What are your thoughts?
09:30 Clearcoat
09:56 Final thoughts
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#woodworking #countertop #diy #weekendwarrior #woodwork #wood #easybuild
bit.ly/45YLuxz
Thanks for watching! If you have any questions please leave them in the comments.
Please click the link below to subscribe if you haven't already.
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
RTK Reference Station Shell with Luba Button Protective Film - bit.ly/3snSlTg
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:10 Unboxing of RTK Reference Station Shell with Luba Button Protective Film
01:32 Installing RTK Reference Station Shell
02:23 Cleaning up the Luba to install the Button Protective Film
05:26 Installing the Button Protective Film
07:12 Final thoughts
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #garage #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e #setup #DIY #easy
Why I Needed to Replace the Power Cord
My Makita 9910 belt sander has been my go-to workhorse for years. But recently, I noticed that the power cord was showing signs of wear and tear. It had a few nicks and exposed wires, which is not only unsafe but also affects the tool’s performance. So, I decided it was time for a cord replacement.
The Makita 9910 Belt Sander: A Reliable Workhorse
Before we dive into the repair process, let me tell you a bit about the Makita 9910. It’s a 76mm (3-inch) belt sander that’s perfect for smoothing surfaces, shaping edges, and tackling various woodworking projects. Its compact design, powerful motor, and ease of use have made it a staple in my workshop.
The Repair Process: Step by Step
Assess the Damage: First, I examined the power cord thoroughly. If you notice any exposed wires, cuts, or fraying, it’s time for a replacement.
Gather Your Tools: For this repair, you’ll need basic tools like wire cutters, a screwdriver, and a replacement power cord (make sure it’s compatible with your specific model).
Unplug the Tool: Safety first! Always unplug the tool from the power source before working on it.
Remove the Old Cord: I carefully removed the old power cord by unscrewing the housing and disconnecting it from the terminals. Remember to take note of how the wires are connected.
Attach the New Cord: I attached the new power cord, making sure to match the correct wires (usually color-coded) to their respective terminals. Proper connections are crucial for safety and functionality.
Secure the Housing: Once the new cord was in place, I secured the housing back together using the screws.
Test the Sander: Before fully assembling everything, I plugged in the sander to ensure that the new cord worked perfectly. Success!
Why You Should Subscribe
I hope you find this repair video both entertaining and useful. Whether you’re a seasoned woodworker or a DIY enthusiast, knowing how to replace a power cord can save you time and money. Plus, it keeps your tools in tip-top shape.
If you have any questions or comments, feel free to leave them below—I’m here to help! And if you haven’t already, please consider subscribing to my channel. By doing so, you’ll stay updated on more repair tutorials, woodworking tips, and exciting projects.
Thanks for watching, and happy woodworking!
Remember, safety is paramount when working with power tools. Always follow manufacturer guidelines and take precautions to prevent accidents. 🛠️🔌
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Makita Belt Sander - amzn.to/3sascXZ
----------------------------------------------------------------
Tools used:
Drill – Craftsman 20v - amzn.to/3NjZBUM
Klein Wire Stripper - amzn.to/3rjoVp1
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:09 Overview of project
00:35 Opening the Sander
01:04 Inspect inside unit
01:30 Disconnect Switch
03:30 Rewiring
04:38 Reassembly
05:28 Final Testing
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Tools #project #diy #Makita #repair #helpful #BeltSander #easyfix
Please click the link below to subscribe if you haven't already.
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
Awning - amzn.to/46zltpy
Aluminum - 3/4-in W x 1/2-in H x 3-ft L Mill Finished Aluminum Offset Angle - low.es/3SpCK0r
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:10 Mammotion garage vs Amazon awning
00:46 What's in the box & assembly
01:48 Temporary solution until I find a permanent home
02:11 Looking over the parts
02:52 Marking the aluminum
03:02 Drilling the holes
03:18 Attaching aluminum to awning
03:36 Installing the garage in the ground
04:35 Final thoughts & testing the fit with Luba
05:20 Closing info
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #garage #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e #setup #DIY #easy
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:29 Turn off the unit and flip over
00:48 Examining the blades and discolored body
01:11 Turning the blades
02:20 Lot size and run time
02:47 Hosing Luba down and getting loose debris off
03:38 Cleaning discoloration off the body
04:18 Closing thoughts
----------------------------------------------------------------
Video Links:
Hose Reel – Giraffe Tools AW401/2QS Retractable Garden Hose Reel 1/2" x 130 ft - amzn.to/3Pucr7m
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e #setup #DIY #easy
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Items Referenced:
Treadmill - UREVO Folding Treadmill, 2.25HP - amzn.to/3RJXkIw
TV – LG 75-Inch - amzn.to/3RGeWES
----------------------------------------------------------------
Tools used:
3d Printer – CR-10 - amzn.to/46cEBcV
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:26 The Problem
01:01 Cleaning the workbench before I can start
01:28 Drawing out the Remote Outline
02:10 Arm Rest Tracing
02:58 Reference Drawings
03:08 Timelapse of 3d Software Design
05:08 Timelaspe of 3d Printing
05:25 Design Version 1 test fit
05:55 Design Version 2 pint & test fit
07:18 Final thoughts
----------------------------------------------------------------
Video Links:
-3d Print File | Garden Hose Clip: youtube.com/shorts/ifUUkbkYeMs
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/WilmerWoodWorks
Facebook - facebook.com/WilmerWoodWorks
#Treadmill #project #diy #upgrades #TVRemote #helpful #3dPrint #FreeFile #3d #Free
3d printing cool 3d prints 3d printing ideas
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:17 Brief Overview of Setting Mowing Zones
00:35 Tip before Mapping your Zones (Adjust the Luba Speed in the App)
00:57 Mapping first Zone
02:47 Setting a "No-Go" Zone
04:00 Thanks for watching
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e #setup #DIY #easy
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Luba AWD 5000 - amzn.to/3qG0vpz
Marker – Milwaukee Inkzall - amzn.to/3OJvUxE
Speed Square – Johnson Level & Tool - amzn.to/3HYxs4p
Drill – Craftsman 20v - amzn.to/3NjZBUM
Forstner bit - amzn.to/3F6mlWA
3D print Fil - cults3d.com/en/3d-model/home/luba-rtk-pole-mount
1/4"-20 x 1-1/2" Stainless Phillips Truss Head Machine Screw: amzn.to/46x6YCk
PETG 3D Filament - amzn.to/3RM99xA
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:12 Overview
00:46 Timelapse of 1st 3D printed mount
01:16 Removing the RTK station
01:50 Tools Used
02:09 Mounting the 3D print
02:56 Attaching the Pole to the 3D print
03:41 NO!!! IT BROKE!
03:48 Redesigned mount
04:05 Replacing the Old with the New
04:53 RTK Holder Photos of the final version
05:05 Cleaning up to move the charging station
05:36 WATCH THIS IF YOU ARE THINKING OF MOVING YOUR CHARING STATION FIRST
06:33 Upcoming project
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e
Here is the 3D print file: cults3d.com/en/3d-model/home/luba-rtk-pole-mount
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
My Luba 5000 AWD:
Here is the link I purchased through – Luba AWD 5000 - amzn.to/3qG0vpz
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:10 Taking footage for another video when I noticed an issue
00:51 The first problem
01:27 The second problem
02:44 The third problem
03:15 Ideas & Solutions
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Supplies Used:
Solar Panel Kit - Nature Power Solar Panel Power Kit — 110 Watts, Model# 53110 - tinyurl.com/4yutzxth
Battery – Intimidator 8AU1 Group U1 AGM Battery - https://rb.gy/90y48
Southwire 6-ft-Gauge-Conductor Non-metallic Liquid tight A/C Whip Kit - rebrand.ly/5wjh2or
Electrical Box - Indoor/Outdoor - rebrand.ly/yqv7l76
Adamax 10-ft 14-Gauge Electro-galvanized Half Slot Channel Strut - rebrand.ly/c8x9tdi
Adamax 3/8-in Straight Strut Nut – rebrand.ly/d680ji9
----------------------------------------------------------------
Tools used:
Work Gloves – CAT Touchscreen - amzn.to/3Oqm97P
Tape Measure – 25’ Craftsman - bit.ly/3Nr9Zdw
Marker – Milwaukee Inkzall - amzn.to/3OJvUxE
Speed Square – Johnson Level & Tool - amzn.to/3HYxs4p
Angle Grinder – Craftsman 20v - amzn.to/3HYxs4p
Drill & Impact – Craftsman 20v - amzn.to/3NjZBUM
Klein Wire Stripper - amzn.to/3rjoVp1
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:21 Supplies used
00:42 Solar Panel Unboxing
02:26 Testing Brackets
02:51 The Battery I used
03:18 Wiring Inverter to Battery
03:48 Cutting rail brackets
04:25 Mounting Brackets to Roof
05:49 Brackets Attached
06:11 Horizontal Rails Attached
06:49 Testing Electrical connections
07:53 Panel installed
08:43 Butt connecting wires
09:15 Hanging the Charge Controller
09:52 Everything is set for testing
10:13 Single light running off of Solar Power
10:27 Future Clean-up
11:09 Final photos
----------------------------------------------------------------
Video Links:
-Yard Shed Overview: youtu.be/Ndm4r25CLYs
-Yard Shed Re-level & Lattice: youtu.be/hqeTO1Gf-q0
-Yard Shed Ramp & Carpet: youtu.be/5AasdcuBSdI
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/WilmerWoodWorks
Facebook - facebook.com/WilmerWoodWorks
#Yard #project #diy #upgrades #Solar #helpful #craftsman #storageshed #storage #building #construction #solarenergy #solarpanel #weekendwarrior
Thanks 🙏
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
My Luba 5000 AWD:
Here is the link I purchased through – Luba AWD 5000 - amzn.to/3qG0vpz
Pool Noodle: Dollar Tree
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:42 Going through the Gate
01:29 Returning to charge
02:04 Software Update & My Settings
02:32 First Cutting with Follow Boundary Set
03:14 THROUGH THE GATE!
03:33 Pathway LUBA Gate out of a Pool Noodle
04:26 FAIL! Next solution coming soon!
04:53 Next Idea
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet #Wall-e
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
Supplies Used:
Hose Reel – Giraffe Tools AW401/2QS Retractable Garden Hose Reel 1/2" x 130 ft - amzn.to/3Pucr7m
Lumber – Pressure Treated 2x6x16 - low.es/3z9Cush
Eapele 4x4 Wood Fence Post Anchor Base - 13ga Steel - amzn.to/3qTFqYQ
4x4x6 Pressure Treated Post – https://rb.gy/av98f
----------------------------------------------------------------
Tools used:
Work Gloves – CAT Touchscreen - amzn.to/3Oqm97P
Tape Measure – 25’ Craftsman - bit.ly/3Nr9Zdw
Marker – Milwaukee Inkzall - amzn.to/3OJvUxE
Drill or Impact – Craftsman 20v - amzn.to/3NjZBUM
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:25 Unboxing
01:22 Installation Destination
01:46 The Plan
02:00 Site Clean-up
02:21 Post Mount Location
02:46 Drilling
03:28 Bolting the Post Mount
03:40 MY PHONE OVER HEATED!!!
03:54 Attaching Hose Reel to 4x4 Post
04:02 IF YOU ARE GOING TO DO THIS WATCH THIS SUGGESTION!
04:36 Test Run
05:00 Closing
05:20 Next upgrades
05:30 Thank You!
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Giraffe #Tools #HoseReel #GardenProject #Watering #Garden #Lawn #lawncare #EasyInstall #Unboxing
Link to FREE 3D Print file:
cults3d.com/en/3d-model/home/garden-hose-holder-clip
youtube.com/wilmerwoodworks?sub_confirmation=1
#Luba #robotmower #awd #lawn #GiraffeTools #Cleanup
youtube.com/wilmerwoodworks?sub_confirmation=1
----------------------------------------------------------------
My Luba 5000 AWD:
Here is the link I purchased through – Luba AWD 5000 - amzn.to/3qG0vpz
----------------------------------------------------------------
Video Chapters:
00:00 Intro
00:10 Backstory
00:27 The Choice
00:37 The Decision
00:47 Current Thoughts on Cons
01:03 Unboxing
01:30 Packaging
02:08 Main Unit
02:23 Main Unit Details
02:45 Charging Station
03:10 RTK Rods
04:13 Charging & RTK Setup
04:30 First Run
05:30 No-Go Zone
05:45 Luba vs. High Grass
06:30 Final thoughts
----------------------------------------------------------------
Video Links:
Any links to products may be affiliate links that give WilmerWoodWorks a small commission at no cost to you, and with no influence on the content.
----------------------------------------------------------------
Website - http://WilmerWoodWorks.com
Instagram -instagram.com/wilmerwoodworks
Facebook - facebook.com/WilmerWoodWorks
#Luba #Robot #mower #AWD #5000 #ZeroTurn #Lawn #lawncare #Skynet
#Luba #robotmower #awd #lawn


