Mirko Pavleski
Arduino 3D Printed self Balancing Cube
updated
altium.com/yt/mirkopavleskimk
A VU meter, also known as a Volume Unit meter, is a device used to display the audio signal level in decibels (dB) in real-time. This time I will describe how to make such a device that uses a VFD (vacuum fluorescent display) instead of analog instruments. In this particular case, the display is a GP1287 with a resolution of 256 by 50 points, and it can be obtained at a relatively cheap price.
The device is extremely simple to build and contains only a few components
- Arduino Nano Microcontroller
- GP1287 VFD Display
- 10K potentiometer,
- and two capacitors and resistors
The signal from both audio channels (left and right) is brought to the analog inputs of the Arduino.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/retro-analog-style-vu-meter-on-vfd-display-7b7d9f
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
Altium 365:
altium.com/altium-365
Octopart The Best Components Search Engine:
octopart.com
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #VUmeter #diyaudio #VFD #AltiumDesign
This time I will describe to you how to make a very simple lightning detector, which with the help of a personal computer with a sound card, and simple software turns into a serious instrument for monitoring and predicting weather disasters. The range of this device, depending on the strength of the strike, and the length of the antenna ranges up to 100 km. On the PC software, we get information about the number of thunderstorms, as well as their intensity in the form of a graphic display for the last ten minutes. If the amplitudes and frequency of shocks increase over time, it is almost a sure sign that a storm is approaching.
Chapters:
0:06 Short Demo
1:31 Description
2:46 Parts
3:30 PC Software
4:33 Electrict lighter Test
5:35 EMF source Test
6:40 Electrostatic source Test
7:04 In Real conditions
8:02 First Tests
9:25 High Gain Record, distanced Lightnings
10:33 Conclusion
Detailed instructions, and schematic at:
hackster.io/mircemk/advanced-sensitive-lightning-detector-with-pc-graph-7e8c82
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, see the Playlist at:
youtube.com/playlist?list=PLAxrqEdgtyUUUJpFkW_csHRR_evBDQdg9
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#lightnings #detector #weather #PCBWay #electronics
Li-Fi is a light communication system that is capable of transmitting data at high speeds over the visible light, ultraviolet, and infrared spectrums. In this experiment I will describe you a way where the light from 10W Power LED diode is used for tarnsfering Audio signal wirelessly. The distance at which transmission can be carried in thics case is about 5-7 meters. Transmiter consists of an LED that is mounted on a suitable heatsink placed behind a plano-convex lens, and a small electronic board that modulates the audio signal into the light beam. The receiver is an ordinary solar cell.
Captions:
0:06 Short Demo
1:53 Description
3:32 Parts
5:35 Demonstration
7:13 At long distance
8:35 Trough home Lighting medium
9:44 Conclusion
Detailed instructions and schematic at:
hackster.io/mircemk/transferring-data-using-a-led-and-solar-cell-ef8828
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Li-fi #electronics #LED #PCBWay
This time I will describe a simple way to make a multi-channel PEMF device that is used to make a special therapeutic bed, or therapeutic chair. The device is very simple to build, and contains components that are easily available online and are also very inexpensive.
Detailed instructions, and schematic at:
hackster.io/mircemk/how-to-make-multichannel-pemf-therapy-device-for-pemf-bed-85c875
You can watch more videos on this topic on the Playlist:
youtube.com/watch?v=TgRXBQuStAA&list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#PEMF #electronics #bioresonancetherapy #
altium.com/yt/mirkopavleskimk
An EMF (electromagnetic field) meter is a device used to measure electromagnetic radiation in a given area. The emf detector described in this video has a minimal number of components, which means that it is simple to make, and does not require any tuning. It works great right from the first power on.
The device is very simple to build and consists of several components:
- Arduino Nano Microcontroller
- SH1106(or SSD1306) Oled display
- and Buzzer
In addition to visual, the EMF detector also has a sound signal with three different frequencies 100, 500 and 1000 Hertz proportional to the strength of the field. This device is also sensitive to static electricity, which means it can also be used as an Electroscope.
Dtailed instructions, schematic, and code at:
hackster.io/mircemk/diy-simple-arduino-emf-electromagnetic-field-detector-9f0539
You can watch more videos on this topic on my Playlist:
youtube.com/playlist?list=PLAxrqEdgtyUUUJpFkW_csHRR_evBDQdg9
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
If you like my job buy me a coffee: ko-fi.com/mircemk
Altium 365:
altium.com/altium-365
Octopart The Best Components Search Engine:
octopart.com
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#AltiumDeisgn #arduino #electronics #electroscope #emf
In this project I will present you a Very Simple "Beat Frequency Oscillator" type of Metal Detector. The detector is extremely simple to build and contains only three transistors and a few additional passive elements. However, despite its simplicity, it gives excellent results. If properly adjusted according to the instructions, it is able to detect a small coin at a distance of 15 cm, and a large metal object at a distance of 50 cm and more. The only drawback of this metal detector is its relatively high instability, so it must be often adjusted using the potentiometer.
Detailed instructions, and schematic at:
hackster.io/mircemk/simple-sensitive-3-transistors-bfo-metal-detector-8f5976
You can watch more videos on this topic on the Playlist:
youtube.com/playlist?list=PLAxrqEdgtyUV1Tyfw5wc_2cPfzOgld-XO
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#metaldetector #electronics #metaldetecting #PCBWay
It is important to note that the safety and efficacy of colloidal silver are still under investigation, and its use as a medical treatment is not supported by mainstream medical authorities. If you are considering using colloidal silver for any purpose, it is recommended to consult with a healthcare professional to understand the potential risks and benefits associated with its use.
Detailed instructions, and schematic at:
hackster.io/mircemk/how-to-make-simplest-colloidal-silver-generator-1b1c8e
If you are interested in this area, see the Playlist at:
youtube.com/playlist?list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#therapy #coloidalsilver #alternativemedicine #electronics
Just to emphasize that I purchased the device with my own funds, so I want to say that when testing the device there is no influence of any kind of sponsorship.
Chapters:
- 0:08 Description
- 3:00 FM Receiving
- 4:44 SW Receiving
- 7:15 MP3 Player
- 9:02 BT Speaker
- 10:23 Inside
- 12:04 Conclusion
Detailed description at:
hackster.io/mircemk/xhdata-d-368-radio-short-review-ba1033
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Radio #electronics #XHDATA D-368
Detailed instructions, schematic, and code at:
hackster.io/mircemk/simple-arduino-hulda-clark-zapper-with-timer-function-913ac2
If you are interested in this area, see the Playlist at:
youtube.com/playlist?list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Arduino #Huldaclark #Zapper #bioresonance
The device presented in the video represents an electronic version of the Compass, where the position of the needle is indicated by group of a three light-emitting diodes.
The device is relatively simple to build and consists of several components:
- Arduino Nano microcontroller
- HMC5883L compass module
- Led ring with 60 adressable RGB Leds type WS2812B
By equating the arrow with the Red Led we get the direction of the North pole. By rotating the compass around its own axis the OLED display shows the angle between north and the tip of the arrow at the given moment. So the Red LED always points North.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/arduino-analog-digital-compass-with-hmc5883l-sensor-a21381
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Arduino #compass #HMC5883L #PCBWay
This time I'm going to show you how to make some practical devices with a cheap compact ZVS driver module sold on AliExpress for less than $5. On the PCB there are two N-channel power MOSFETs of the H6LG type designed for low voltage, high speed switching applications in power supplies intended for Drain current up to 20 Amps.
I have tested this device in function of Induction heater, High Voltage source, and Wireless energy transfer device. It performs the function for which it is intended quite correctly, and I think that its limit for reliable operation is about 5A at 12V, which is half of what is declared by the seller. At higher currents, the mosfets heat up significantly and their burnout can happen very easily. But 60 Watts are quite enough, and as seen in the experiments, the module can work continuously for a relatively long time without problems.
Detailed instructionns at:
hackster.io/mircemk/induction-heater-hv-source-and-wireless-energy-transfer-3c688a
Chapters:
0:06 Short Demo
1:52 Description
3:36 Induction heater at 5V
4:36 Induction heater at 10V
5:12 Induction heater at12V
6:42 High Voltage Source
8:08 Wireless energy transfer
9:52 Conclusion
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#ZVS #inductionheater #electronics #energytransfer #HVsource
Supposedly this tube in this connection (SE) should bring 130 watts RMS as pure Class A. It is basically very simple and consists of components that we can have, or can be very easily found, with the exception of the output audio transformer.
A short conclusion based on my previous extensive experience in the field of self-construction and listening, mostly on transistor amplifiers: Generally it can not be a high-end device, but it is a very interesting project because it shows how a relatively strong Hybrid Tube output amplifier can be made in a relatively simple way.
And as a very important note, keep in mind that this circuit is not a toy or a beginner's craft project. Experimenting with it should only be done with well-founded specialist knowledge in the fields of electrical engineering / electronics. This circuit is only intended to show how enormous power amplifier can be generated with little effort. For safety reasons, the capacitors, transformer, and the bridge rectifier should be housed in a protected housing (wood / plexiglass).
Chapters:
0:10 Description
2:39 Parts
7:15 Demonstration
9:57 Conclusion
12:30 Building
You can find detailed build instructions and circuit diagrams at:
hackster.io/mircemk/diy-simple-gu81-tube-hybrid-amplifier-130-watts-rms-a5d142
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#amplifier #electronics #tube
A weather station typically includes sensors that measure various environmental factors, and data collected by these sensors is then utilizes to predict the weather for the next few hours or days. In this case the data is taken from Opeweathermap site where we can create a free API key, so the device contains a minimum number of components.
This is probably the most advanced internet weather station for the construction of which instructions can be found on the Internet, especially if you know that the device I presented in the video is only a small part of the whole project created by Andrey Ushakov. Also, this is a very good example of how a great device can be made with very little hardware and good software.
Chapters:
0:10 Short Demo
2:00 Description
2:43 Uploading code to MCU
7:20 On the Smartphone
9:33 Demonstration
13:40 Conclusion
Detailed instructions, schematic, and code at:
hackster.io/mircemk/advanced-esp32-internet-weather-station-with-5-day-forecast-bc1f76
If you are interested in this area, look at the Playlist with all my DIY Weather Instruments at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#weather #electronics #esp32 #ili9341 #PCBWay
This time I will try to describe to you in more detail the simplest and cheapest way to make such a device, and for its making I will use components that can be easily obtained. Of course, in order to make it yourself, you must have at least basic knowledge in the field of electronics. What I can assure you for sure is that this device does not have any negative effects on the human organism (in my humble opinion, not even positive ones :)), because the device is actually an RF transmitter that is used for the transmission of SW Radio signals.An identical replacement for an expensive plasma tube is the glass tube removed from a standard CFL lamp that we have recently used in our homes.
Detailed instructions, and schematic diagram at:
hackster.io/mircemk/the-simplest-and-cheapest-way-to-make-plasma-rife-machine-f3f776
Chapters:
0:05 Description
1:28 Frequency Generator
3:09 "Frex16" software
10:07 Carrier Gen. + Modulator + Amplifier
11:18 HV Trafo
12:48 Plasma Tube
15:29 Demonstration
16:27 Spectrum Analisys
17:35 Radiation
18:13 Building
You can watch more videos on this topic on the Playlist:
youtube.com/watch?v=TgRXBQuStAA&list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Rife #electronics #bioresonance
This is another in my series of unusual DIY clocks, this time realized based on the holographic effect. This is the simplest way of creating a hologram, where the light source and the screen are placed at an angle of 45 degrees.
The clock is really simple to build, and consists of several components:
- Arduino nano microcontroller
- DS3231 Realtime clock module
- 8x32 Led matrix module
- and two buttons
It can also displays holograms from a smartphone. The entire device is covered with black matte wallpaper, in order to have as little reflected light as possible on the surrounding parts, for a more realistic appearance.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/diy-arduino-holographic-matrix-clock-c35b5e
If you're interested, you can check out my playlist of unusual clocks at the link:
youtube.com/playlist?list=PLAxrqEdgtyUVwklrr0-o5DU8HtXBR1BmG
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #clock #hologram #PCBWay
The device is very simple to build and contains several components:
- Arduino Nano microcontroller
- 8x8 RGB matrix with WS2812 led chips
- Three buttons,
- and Buzzer
Also for the led matrix I made a dedicated grid on a 3D Printer for a better visual impression.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/arduino-connect4-game-human-vs-microcontroller-e5c8ea
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #electronics #connect4 #game
This time I will present you a very simple way to make an effective ion thruster. I got the idea from the plasma channel "youtube.com/@PlasmaChannel" where several such devices are described in the previous period.
I tried to construct as simple as possible such a device that does not require precise 3D printed parts, so that it can be made by less experienced makers. From the material we need an ordinary 2.5mm copper wire used in house installations, a small metal plate (in this case aluminum), and a high voltage source.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed instructions at:
hackster.io/mircemk/diy-simplest-multistage-ion-thrust-plasma-engine-2591ea
Plasma channel project:
youtube.com/watch?v=nrEBoPYS4ns&t=499s
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#electronics #highvoltage #ionengine #space #pcbway
This game is based on the Cyclone arcade game, where the player tries to stop an led scrolling around a circle at a specific spot. In addition, in this case there is an LCD display that shows highscore and current round. Also, each segment of game has a different sound.
As for the gameplay, in this case there are no levels with increasing speed, but each successive round starts with a randomized speed. The device is very simple to build and consists of only a few components. The principle of operation, as well as the method of making the game, are explained in the video.
Detailed instructions, schematic diagram, and code at :
hackster.io/mircemk/mini-cyclone-game-on-ws2812-led-ring-and-arduino-nano-41394e
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Cyclone #game #arduino #PCBWay
Sensitive Pulse Induction (PI) metal detector which is based on ARM STM32 microcontroller, which has significantly better features than Arduino and is also cheaper. It can detect metal coih at distance of 30cm, and big metal object at distance of more than 80 cm. The indication is made on a WS2812B module of eight LEDs and a buzzer.
The sensitivity of the metal detector is adjusted manually by rotating the encoder knob. There is also a menu mode. The first press on the encoder knob enters the LED brightness adjustment mode. Second press, buzzer on/off mode. Second press, buzzer on/off mode. The fourth press, we enter the adjustment mode for large or small objects. The fifth press, exit the menu mode and auto-adjust the sensitivity.
Detailed instructions, schematic, amd code at:
hackster.io/mircemk/diy-stm32-pulse-indiction-metal-detector-arduino-ide-194703
-------------------------------------------------------------------------------------
If you are interested in this area, see the Playlist with all my Metal Detectors at:
youtube.com/playlist?list=PLAxrqEdgtyUV1Tyfw5wc_2cPfzOgld-XO
-------------------------------------------------------------------------------------
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#STM32 #Arduino #metaldetector #PCBWay
Making such a clock is extremely simple and consists of only two components:
- ESP8266 microcontroller board
- and GP1287 VFD display
This is the simplest example that basically shows how to connect the display to an ESP8266 microcontroller, but it can be connected to an Arduino in a similar way by changing the number of pins when defining it in the U82G library.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/simple-esp8266-ntp-clock-on-vfd-display-vfd256x50-gp1287-e0187a
If you're interested, you can check out my playlist of unusual clocks at the link:
youtube.com/playlist?list=PLAxrqEdgtyUVwklrr0-o5DU8HtXBR1BmG
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #ESP*8266 #clock #VFD
In this project, tachometer is made using an IR Sensor module as unit for measuring the number of rotations. One diode transmits IR rays which reflect back to the receiver diode and then IR Module generates an output or pulse which is detected by the Arduino controller.
The device is very simple to build and consists only three components:
- Arduino Nano microcontroller
- IR sensor module
- and SH1106(or SSD1306) Oled display
The device is built into a suitable box made of 5 mm PVC board, covered with self-adhesive colored wallpaper.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/arduino-tachometer-rpm-meter-with-ir-sensor-module-39cbd9
Chapters:
05:05 Short Demo
01:53 Description
03:10 Inside
03:47 Demonstration
04:15 Low temp. Stirling
07:30 High temp. Stirling
09:18 PC fan
10:00 Building
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #tachometer #dispaly #PCBWay
These are two of the simplest ways to make a 12V to 220V inverter, one with transistors and the other with Mosfet. Most often this type of inverters are made from parts of old PC power supplies. Тhe main purpose of this video to test the real capabilities of these devices, and whether it is reasonable to make them.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed instructions and schematics at:
hackster.io/mircemk/simple-inverters-12v-to-220v-comparision-testing-c399dc
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#PSU #electronics #PC #PCBWay
Note that if you use the schematic given in this project, for the device to work properly, we need to install the modified version of the tft-espi library that is provided.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/diy-connect-4-game-on-2-8-inch-tft-touch-display-117aea
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#esp32 #electronics #connect4 #game
This time I will prtesent you how to make a AM/FM Radio, based on radio module with TEF6686 chip from NXP. This miniature module has amazing possibilities, great sensitivity and selectivity, adjustable de-emphasis and filter.
To make a complete radio receiver we need only a few components:
- radio module with TEF6686 chip
- Arduino microcontroller
- Two capacitors
- Audio jack and cable
- and Personal Computer
This receiver is superior to the Arduino radio receivers with RDA and TEA chip that I have built, and in my opinion it also has better reception than the well-known portable radios .
Chapters:
00:05 Short Demo
02:00 Description
03:00 Components
04:04 GitHub
05:20 FM/AM Short test
07:40 Spectral scan
09:20 "Station List" software
10:47 "RDS Spy" software
11:30 Conclusion
- marsel90-1 GitHub: github.com/marsel90-1/NXP-TEF6686_F8602_F8605-Arduino-Radio
- Station List : http://zeiterfassung.3sdesign.de/station_list.htm#download
- RDS SPY : http://rdsspy.com/downloads
If you like my job buy me a coffee: ko-fi.com/mircemk
Detailed instructions, schematic, and code at:
hackster.io/mircemk/simple-tef6686-arduino-pc-am-fm-radio-receiver-227a38
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #Radio #TEF6686 #PCBWay
It is really simple to build and consists of a few components:
- ESP8266 microcontroller based module
- 16x16 Addressable led matrix with WS2812B Leds
- Button
- and 10K Pull-up resistor
Also, the clock has a nice web interface through which all settings are made. Тhis is a great project that can be made even by beginners because it contains very few components and does not require any tweaking or modification of the code.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/esp8266-word-clock-on-16x16-led-matrix-91cc9b
If you're interested, you can check out my playlist of unusual clocks at the link:
youtube.com/playlist?list=PLAxrqEdgtyUVwklrr0-o5DU8HtXBR1BmG
Chapters:
00:07 Short Demo
00:43 Description
02:07 Inside
03:04 Demonstration of work
07:15 VBuilding
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #electronics #clock
In this video I will present you how to make an electronic version of European Roulette game (with37 Leds), where the movement of the ball is simulated by successive illumination of LEDs. Тhis time is used the "Charlieplexing technique", so the construction is drastically simplified and apart from Arduino and LEDs, five resistors, a button and a speaker are needed. There are three possible speeds of throwing the ball, which depends on the duration of its rotation on the board. The entire device is installed in a suitable box made of PVC board with a thickness of 3 mm and covered with self-adhesive colored wallpaper.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/how-to-make-simplest-arduino-european-roulette-game-64960b
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #Roulette #game #PCBWay
This time I will present you a way to make an Advanced Rife Machine where the carrier frequency can be changed continuously in the range of a few Kilohertz up to 100 Megahertz, which far exceeds the range of the original machine. In addition, the precision and stability of the carrier frequency is incomparably higher, thanks to the use of modern Microcontrollers. The carrier frequency is displayed on a color TFT display on a beautiful retro style. Also for the source of Rife frequencies I will present you a wonderful free software that is very flexible, simple to set up, and graphically excellent.
Detailed instructions, schematic , code, pictures at:
hackster.io/mircemk/diy-advanced-plasma-rife-machine-2b7eec
Frex16 software: http://www.spectrotek.com/frex
Chapters:
00:00 Short Demo
02:10 Description
04:18 Parts
05:40 Frex16 Software
12:40 Demonstration
15:10 Spectrum Analysis
21:40 Building
If you are interested in this area, see the Playlist at:
youtube.com/playlist?list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #Rife #bioresonance #PCBWay
This time I will show you how to make a stand-alone Internet Radio, which in terms of characteristics, stability, and functions is comparable and even better than commercial devices of this type, and yet the price for making it is many times lower. The device contains a large color TFT display with a Touchscreen through which all controls are performed, so there is no need for additional buttons. It also has a large-digit clock with advanced alarm settings, as well as an MP3 player that can play standalone tracks and playlists.
This internet radio in general works surprisingly fast because the images are downloaded directly from the SD card, instead of being drawn using the microcontroller. So we can very quickly and easily change the backgrounds, the style of the numbers, insert logos and other characters without changing a single line of code.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/esp32-internet-radio-mp3-player-and-alarm-clock-326cee
Captions:
0:00 Short Demo
4:21 Description
5:34 Inside
7:20 Demonstration
12:35 Web Interface
14:23 Building
If you like my job buy me a coffee: ko-fi.com/mircemk
Link to original project:
github.com/schreibfaul1/ESP32-MiniWebRadio
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#esp32 #electronics #webradio #PCBWay
Other benefits according to his claim are:
- Cell revitalization by increasing the oxygen supply and the nutritional value of the blood,
- Activation of the body's self-healing powers and increase of the general well-being
- Pain therapy
- Detoxification and elimination of harmful substances
- Autoimmune Disease, and other conditions
In the given video, I will describe to you how in the simplest way to make such a device, also called Lakhovsky MVO (multi-wave oscillator), as well as a technical analysis of the device itself. Also at the end you can read the short conclusion, which is actually my personal opinion about the functionality of this machine.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
Detailed instructions, schematic diagram, pictures at:
hackster.io/mircemk/diy-lakhovsky-mwo-milti-wave-oscollator-device-3c3203
Chapters:
0:06 Short Demo
1:00 Description
3:08 Parts
4:24 Spectrum analyzer
5:44 Testing
9:00 Conclusion
12:24 Making Antenna
13:02 Radiating
A playlist of videos on this topic at:
youtube.com/playlist?list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#highvoltage #teslacoil #Lakhovsky #MWO
This time I will present you a very simple way, using an Arduino microcontroller, you can make an electronic Barometer + Barograph that presents the results in graphic form on a 20x4 LCD display.
The device is very simple to build and contains only a few components:
- Arduino Nano microcontroller
- 20x4 I2C protocol LCD Display
- BME 280 Pressure sensor board
- and one Button
Basically, when the pressure rises, an improvement in the weather is expected, and conversely, when it decreases, a worsening of the weather is expected.
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Weather Instruments at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #electronics #barometer
This time I will present you how to make a quality High Voltage source in a very simple way. For this purpose I will use a old PC power supply, but it can also be used new one, whose price is very low, in the range of ten dollars due to mass production nowadays. During the testing I will use several different power supplies with different defined power and brands.
Usually, for HV experiments is used so-called ZVS driver, but damage to the mosfets often occurs due to its low efficiency. I made this device as a basis for future projects related to High Voltage, because it is compact, easy to make, galvanically isolated from the mains and also stable during long-term operation.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed description, instructions, and pictures at:
hackster.io/mircemk/the-simplest-way-to-make-a-high-voltage-source-from-pc-psu-473c6d
Chapters:
0:07 Short Demo
1:43 Description
2:34 Schematic diagram
4:06 Parts
4:50 Power On switch
5:33 Modifying
7:46 First PSU
8:05 Second PSU
8:20 Third PSU
8:52 Fourth PSU
9:25 On Oscilloscope
9:53 Conclusion
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #PSU #highvoltage #PCBWay
This time I will present you an interesting way to use the PCB board from an old CFL bulb to make some useful electronic devices. As we know, these bulbs are no longer in use, so we can buy from the remaining stock for a very low price. I bought 24 watt CFL bulb for less than $2.
I noticed the genius idea these days at the Zafer Yildiz channel and immediately decided to make some kind of device with a CFL bulb electronic board. I actually expanded the project, and also made a Power Supply and a High Voltage Source.
SAFETY NOTE: Please do not attempt to recreate the experiments shown on this video unless you are familiar with High Voltage Safety Techniques! Direct Current even above 60V maybe lethal, even when the AC supply voltage has been disconnected due to the stored energy in the capacitors.
Detailed instructions, schematics, pictures at:
hackster.io/mircemk/induction-heater-power-supply-and-hv-source-from-cfl-bulb-40cfc6
CHAPTERS:
0:10 Short Demo
2:02 Description
3:43 Schematic diagram
5:11 Modifying
6:42 On Oscilloscope
7:16 Induction Heater
8:23 5V PSU
9:00 HV Source
9:47 Conclusion
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my High Voltage projects at:
youtube.com/playlist?list=PLAxrqEdgtyUV5SriPejNitf6dWFyW8zPQ
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#CFL #electronics #bulb #PCBWay
Power supply unit is the most useful and necessary device in every laboratory. In this video I will try to briefly explain how to build a complete device, as well as some of the more important features.
This is only a control and regulation module, and in order to have a complete laboratory power supply, a direct voltage input source is also needed. For that purpose I use DC power supply from an old printer 24v/5A and this is enough for my needs. A very useful and interesting feature of this model is that it can be controlled through an application on a Smartphone or PC.
The only objection is perhaps the fact that the power supply is made in buck topology not buck/boost. This means that the Мaximum output voltage is about 1V lower than the input voltage.
Detailed instructions, pictures, schematics at
hackster.io/mircemk/how-to-make-advanced-laboratory-power-supply-with-rd6006w-3fa8fd
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#electronics #PSU #RD6006W #PCBWay
Recently, quality metal detector modules have appeared on the market for a very low price. This time I will present you one such module and I will try to briefly capture its features. To put the metal detector into operation, it is necessary to solder only six wires, two from the power supply, two from the speaker, and two from the coil.
The coil consists of 25 turns of enameled copper wire with a diameter of 0.4 to 0.6mm. The diameter of the coil is 20 centimeters.The detector worked immediately after switching on, but only required some adjustment.
As in the previous review for the Clone Pi-W Metal Detector, I am really pleasantly surprised by the features such as sensitivity and stability in operation, considering that it is a very inexpensive module, and to make a complete mid-range metal detector we need almost no knowledge from the field of electronics. This time I would like to emphasize that the results were a little better, but in real conditions, in moderately wet soil, many false alarms occur, so to avoid that, filters are used that also slightly reduce the sensitivity. Thus, the final result when comparing these two metal detectors is almost identical.
Detailed review, instructions at:
hackster.io/mircemk/impulse-iii-metal-detector-short-review-59b3a9
--------------------------------------------------------------------------------------------------------------------------------------
If you are interested in this area, see the Playlist with all my Metal Detectors at:
youtube.com/playlist?list=PLAxrqEdgtyUV1Tyfw5wc_2cPfzOgld-XO
--------------------------------------------------------------------------------------------------------------------------------------
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #metaldetector #PCBWay
This time I will present you how to make a simple FM Radio with a beautiful retro linear scale. The idea for the project was taken from the Volos Projects channel, where is presented the code that was specially made for the LilyGO T-Embed device, which has a TFT screen with a resolution of 320 x 170 pixels. I just adapted the code for the ILI9341 TFT Display which has a resolution of 320×240 pixels powered by an ESP32 dev kit module.
As you can see, the device is very simple to build and consists of several components:
- ESP32 dev kit board
- ILI9341 TFT Display 2.8 inch
- TEA5767 Radio module
- Rotary encoder with push button
- Small D-class audio amplifier board
- and Speaker
In order for the code to run without errors, you should use the libraries provided with the code, as they have been modified (TFT_eSPI) specifically for this project.
Detailed instructions, Schematic, and code at:
hackster.io/mircemk/linear-scale-5767-fm-radio-on-ili9341-tft-display-e45fb4
Link to original project: github.com/VolosR/TEmbedFMRadio
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#TEA5767 #electronics #Radio #PCBWay
This project is sponsored by PCBWAY pcbway.com
Several of the most famous versions of Rife machines made, use Plazma Ray Tube as the medium to radiate the given frequencies. The plasma ray tubes are RF (radio frequency) powered, which means frequencies are broadcast and penetrate without the type of limitation seen with skin contact electrodes, where the electricity can skim over the surface of the body without fully penetrating the skin’s natural resistance.
In this video I will try to explain to you the basic principles in designing and making the simplest device of this kind.
I will aslso try to give a conclusion, which will be my personal opinion and does not necessarily mean that it is true. I am not a medical person, and I only have basic knowledge in this field, but therefore I have studied and know the technical side of this device very well.
Detailed informations, and description at:
hackster.io/mircemk/how-to-make-riginal-plasma-rife-mchine-e40676
You can watch more videos on this topic on the Playlist:
youtube.com/watch?v=TgRXBQuStAA&list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Rife #electronics #bioresonance #PCBWay
Тhis time I will present you a simple way to control 16x2 LCD Display via Windows PC software. For this purpose, we use an Arduino microcontroller, which in this case has the function of an interface between the Display and the USB port of the Computer. I use Open Source software for Windows "LCD Smartie" that you can use to show lots of different types of information on your LCD or VFD.
This project is extremely simple to build and contains only two components: Arduino microcontroller, and LCD display.
The device is built into a suitable box made of 5mm PVC board and lined with self-adhesive wallpaper.
Detailed instructions, schematic diagram, and code at:
hackster.io/mircemk/arduino-lcd-info-panel-for-pc-lcd-smartie-19946f
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #LCDSmartie #PCBWay
This time I will describe to you how to make a very simple single tube amplifier that also works at low voltage and is powered by 12V DC. Valve amplifiers produce greater amounts of total harmonic distortion, but this type of distortion (2nd harmonic) is not as disturbing to the ear, and is perceived as a "warm pleasant sound", especially when playing instruments where this amplifiers are still indispensable.
Device is very simple to build and consist only a few components:
- PCL82 Vacuum Tube
- DC-DC boost module
- 7815 Voltage stabilizer
- 1M potentiometer
- 220V/6V mains transformer
- and Speaker 3W/4Ohm
The output power is about one watt without unpleasant audible distortions, which is quite sufficient for the purpose for which I built it. Namely, I will use this amplifier in my next simple radio projects as an audio output part. However, with high-sensitivity speakers with a light membrane with a large surface area, this power is quite sufficient for normal listening.
The device is built into a suitable box made of 5mm PVC board and lined with self-adhesive wallpaper, and it also serves as a speaker box.
Detailed instructions, schematic diagram, and pictures at:
hackster.io/mircemk/diy-simple-pcl82-low-voltage-12v-tube-amplifier-292ba3
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#tube #amplifier #electronics #PCBWay
This time I will show you how to make a device that monitors the quality of fine dust particles in the atmosphere. It measured both PM10 and PM2.5 particles uses the Nova PM SDS011 Laser Sensor.
The device that is presented this time works independently, so it is completely flexible in terms of installation location, size, as well as the cost of the entire device. The results are displayed on the 2.8 Inch TFT LCD Display, but also thanks to the use of the ESP8266 Wi-Fi module, is sent to a Windows PC running a small server application to log the data on a chart to be viewed on the application itself or in a web browser either on the PC or over the internet.
The device is relatively simple to make and consists of several components:
- ESP8266 based microcontroller board, in my case NodeMCU 1.0
- Nova PM SDS011 Laser based sensor
- 2.8 Inch TFT LCD Display with 240x320 dots resolution
- 2N7000 or similar Mosfet transistor
- Save data button
- and couple of resistors
Finally, it is installed in a suitable box made of PVC boards with thicknesses of 3mm and 5mm and covered with self-adhesive colored wallpaper.
Detailed instructions, schematic diagram, and code at:
hackster.io/mircemk/esp8266-air-quality-monitor-with-nova-pm-sensor-sds011-9b4396
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Weather Instruments at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #ESP8266 #PCBWay
These days I came across an old "Trio JR-500S" ham radio receiver, and I decided to briefly compare it with SDRplay RSP1A Software Defined Radio.
For testing the shortwave area I will use antenna splitter that I have made before, which is very simple to make and gives excellent results.
Also, I will use equal conditions (antenna) for both receivers, which in this case is a home-made "Loop on Ground Antenna" LoG , which I made according to the instructions of Matt Roberts (KK5JY.net)
A short conclusion:
Obviously, no real comparison can be made, considering that one device contains only 7 Tubes manufactured in the sixties, and the other device contains millions of semiconductors and modern precision crystal oscillators plus modern PC spectrum analysis and control software. The software contains countless options including continuous scanning of the entire SW range, step size, demodulation of all types of analog and digital signals, many types of filters, change of AGC parameters, RF Gain control and many, many more.
On the other hand, at least for me, it is a great pleasure to receive signals on the old analog receiver with precise movement of the knob and the frequency shown on the circular scale located in the central area, no need for a computer and many settings. It's just a matter of plugging in an antenna and turning the dial. Of course, the reception is significantly weaker, but it's my great pleasure to have another wonderful retro receiver in my collection.
Detailed description at:
hackster.io/mircemk/trio-jr-500s-radio-vs-sdrplay-rsp1a-sdr-1809f6
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#electronics #hamradio #SDRplay #pcbway
0:07 Short Demo
1:35 Description
4:17 Audio
5:00 Antena Splitter
5:15 LoG Antena
6:20 Comparising
9:00 Conclusion
This time I will show you how to make an interesting interactive game, on a 32 by 8 LED matrix, which is controlled by moving the device. During a certain movement of the device, the MPU6050 sensor sends a signal to the microcontroller, and based on that information, the microcontroller performs a given action on the screen.
The device is extremely simple to build and basicly consists of only three components:
- Arduino nano microcontroller
- MPU6050 Gyroscope + Accelerometer sensor modul
- 32x8 Led matrix module with MAX7219 drivers
Immediately after switching on, a scrolling text with the name of the game appears. By tilting to the left we move through the menu. To activate an option, we tilt the device down. We return to the menu by tilting the device upwards. To start playing the game, when we are in the PLAY menu, we tilt the device down and then to the left. Now we play the game by moving left and right, trying not to hit the wall. With each passed segment, a certain number of points are obtained. After a certain time, the movement speed increases. When we collide into the wall, the end of the game is signaled and the result appears. By tilting up, we return to the main menu again.
Finally, the device is installed in a suitable case made of PVC board and covered with colored wallpaper.
Detailed instructions, schematic diagram and Arduino code at:
hackster.io/mircemk/arduino-mpu6050-interactive-scrolling-game-on-32x8-matrix-4a4f27
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Arduino #game #electronics #PCBWay
Due to the great interest and many questions that were asked to me in the previous period, I decided to make this video in which I will try to explain the working principle of PEMF device, and its components in a very simple way, so that those readers who only have basic technical knowledge could understand what it is about. I will also describe to you the simplest way so far, to make such a device yourself and try the effects of this type of therapy.
Each PEMF device basically consists of three parts:
- Square wave generator
- Amplifier of this signal,
- and a coil that generates the magnetic flux
These parts are described individually and in detail in the video.
Also, I will show you how to make the simplest PEMF device at home, using materials that can be found very easily.
Detailed description, schematics, DIY instructions at:
hackster.io/mircemk/pemf-therapy-device-experiments-general-description-build-13bd13
If you are interested in this area, see the Playlist with all my simple PEMF devices at:
youtube.com/playlist?list=PLAxrqEdgtyUVrUw76GnXTrH45cRhSrfYs
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#PEMF #electronics #PCBway #DIY
A variable frequency oscillator (VFO) is an oscillator whose frequency can be tuned (i.e., varied) over some range. It is a necessary component in any tunable radio transmitter or receiver. This time I will show you how to make a VFO that covers the range from 100 KHz to 160 MHz and uses a minimum number of components. The selected frequency is displayed on a beautifully designed retro scale in the style of ham radios from the previouscentury.
The device is relatively simple to make and contains only a few components.
- ESP32 Dev. kit board
- 1.8" TFT Display with 128x160 dots resolution (ST7735 chip)
- SI5351 programmable clock generator board
- Rotary encoder with push button
- three buttons
- and Output connectors
Turning the rotary encoder changes the frequency. The tuning step, and thus the scale rotation speed, is controlled by the two buttons, and ranges from 10 Hertz to 1 Megahertz. With the the rotary encoder button we memorize the current frequency. The oscillator also has the ability to memorize previously defined frequencies in the code, that we can call up with the MEM button. And finally, the whole device is embedded in a suitable box made of PVC material with a thickness of 3mm and 5mm, and coated with colored self-adhesive wallpaper.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/universal-vfo-10-khz-160-mhz-with-retro-analog-scale-c7c5b6
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Arduino #ESP32 #VFO #PCBway
The HPDL-1414 is a 16-segment LED display with four printable fields that is over twenty years old. This time I will show you how to make an interesting mini Retro-look Clock with such a displays, as well as the way in which static and moving text can be written on it. For this purpose I wrote a super simple code, and a Schematic diagram. The device is very simple to make and consists of several components. When switching on, the moving text appears first, and then the correct time, in the form of hours, minutes and seconds.
Finally, the device is mounted in a suitable box made of PVC plastic with thicknesses of 3mm and 5mm, and covered with self-adhesive colored wallpaper.
Detailed instructions, schematic diagram, and code at:
hackster.io/mircemk/hpdl1414-micro-clock-efb873
If you like my job buy me a coffee: ko-fi.com/mircemk
If you're interested, you can check out my playlist of unusual clocks at the link:
youtube.com/playlist?list=PLAxrqEdgtyUVwklrr0-o5DU8HtXBR1BmG
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#Arduino #clock #pcbway
An audiometer is a machine used for evaluating hearing acuity. This device typically transmits pure tones to the headphones of the test subject at varying frequencies and intensities, and records the subject's responses to produce an audiogram of threshold sensitivity. In this case, the Arduino is an input-output unit that generates tones with different frequencies and intensity, and then displays the feedback results received from the person being tested, on a screen with a resolution of 8 x 8 pixels made up of 64 RGB LEDs. The screen displays two graphs in different colors, for the left and right ear.
The device is powered by two lithium batteries connected in series, and a 7805 5V voltage stabilizer is placed at its output.
Finally, the Audiometer is installed in a suitable case made of PVC board and covered with colored wallpaper.
Detailed instructions, schematic diagram, and code at:
hackster.io/mircemk/arduino-hearing-test-device-audiometer-aa1a86
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
This time I will show you how to make a small FM Radio with oled display which all functions are controlled by a single rotary encoder. Since this is my first project with Arduino Due, in the video I will briefly explain how to upload a sketch to this board.
The device is relatively simple to build and contains the following components:
- TEA5767 small Radio board which is the basis of the whole project
- Arduino Due microcontroller board
- SH1106 Oled display
- LM4811 Headphone Amplifier with Digital Volume Control
- PAM8403 small audio D-class amplifier board
- Speaker
- and Rotary encoder
With a long press on the rotary encoder, the radio switches to SEEK mode and starts automatic station search. Short presses of the encoder change the focus under the frequency numbers, and rotating changes the value of the digit. After a few clicks, the focus moves to the volume bar, and now we can change the sound intensity by rotating it.
Finally, the device is installed in a suitable box made of PVC plastic with thicknesses of 3mm and 5mm and coated with a self-adhesive colored wallpaper.
Detailed instructions, schematic, and code at:
hackster.io/mircemk/diy-arduino-due-tea5767-fm-radio-f621d9
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my DIY Radios at:
youtube.com/playlist?list=PLAxrqEdgtyUXnLy3kTU0WbObQxiEfLDBx
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
https://www.youtube.com/c/MirkoPavles...
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #radio #pcbway
At first glance, the module is solidly made, the elements are precisely placed and well soldered. The price is less than $50, including postage. In this case, it is an SMD version of this detector, and you can find the same metal detector made with standard components made according to an identical schematic diagram.
The coil is identical to the one I use in my DIY Pulse Induction Metal Detectors, and consists of 25 turns of enameled copper wire with a diameter of 0.4 to 0.6mm. The diameter of the coil is 200 mm.
In order to put the metal detector into operation, it is necessary to solder only six wires, two from the power supply, two from the speaker, and two from the coil. The detector worked immediately after switching on, but only required some adjustment.
I am really pleasantly surprised by the features such as sensitivity and stability in operation, considering that it is a very inexpensive module, and to make a complete mid-range metal detector we need almost no knowledge from the field of electronics. All we have to do is solder a few wires, and the only thing is to be very careful about the polarity of the battery.
Detailed instructions, schematic and code at :
hackster.io/many-authors/clone-pi-w-atmega8-arduino-metal-detector-short-review-5f96df
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #metaldetector #pcbway
The device is very simple to build and contains the following components:
- Arduino Nano microcontroller
- 7 pieces 8x8 Led Matrix modules driven by MAX7219 chip
- BME280 sensor module
- And DS3231 real-time clock module
Due to the large number of diodes, the device should be powered by an external source that should provide a current of 2 Amps or more.
Detailed instructions, schematic diagram, and code at:
hackster.io/mircemk/arduino-matrix-scrolling-weather-station-and-clock-with-bme-1e8a98
If you like my job buy me a coffee: ko-fi.com/mircemk
If you're interested, you can check out my playlist of unusual clocks at the link:
youtube.com/playlist?list=PLAxrqEdgtyUVwklrr0-o5DU8HtXBR1BmG
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
This time I will show you how to connect and install Tetris Game on this small but powerful device on Arduino IDE, as well as the basic steps on how to upload a program to it.
For this project I made a small plastic holder to which the Vio Terminal is attached with the help of two small nuts.
Detailed instructions and code at:
hackster.io/mircemk/wio-terminal-tetris-game-arduino-ide-201786
If you like my job buy me a coffee: ko-fi.com/mircemk
If you are interested in this area, look at the Playlist with all my Arduino Games at:
youtube.com/playlist?list=PLAxrqEdgtyUWWNxxU4uI2I6utbcPYBx-C
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
This time I will show you how to make a simple One axis self balancing device, which is based on the PID control system. A PID controller continuously calculates an error value as the difference between a desired setpoint and a measured process variable and applies a correction based on proportional, integral, and derivative terms.
In our case, the MPU6050 sensor collects data of the position (more precisely the angle) of the device, and sends that data to the microcontroller which performs calculations based on previously given algorithms and constants, and sends the result to the electric motor, which with its movement tends to hold the device in the desired position.
Depending on the placement and weight of the batteries and the characteristics of the sensor itself, during the first activation the device will probably not be completely stable and will swing left and right. To stabilize, it is necessary to experiment with the values of floatX1, floatX2, and floatX3 in the code. If it is well tuned even if we try to mechanically shift it to an unbalanced state, it returns automaticly to a state of equilibrium. You can download 3D print .STL files at: thingiverse.com/thing:5361714
Detailed instructions, schematic, code, and 3D files at:
hackster.io/mircemk/diy-aduino-one-axis-self-balancing-device-55e45b
If you are interested in this area, look at the Playlist with all my Arduino Robots at:
youtube.com/playlist?list=PLAxrqEdgtyUXkN041lfDg6-i_e8Was_Ao
If you like my job buy me a coffee: ko-fi.com/mircemk
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
youtube.com/c/MirkoPavleskiMK/videos
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !


