The Future of Custom Cars?! - 3D Printing at SEMA 2025! MandicReally 2026-09-18 | The Future of Custom Cars?! - 3D Printing at SEMA 2025!
3D Printing My Way to a Smarter Home—One Dumb Gadget at a Time MandicReally 2024-10-19 | Our "McMansion" was built in the 90s and it shows. This house is DUMB, so let's turn this into a smart home, 1 gadget and 3d print at a time! We will replace dumb old technology with modern smart devices capable of connecting to a central control system in Home Assistant. All while using 3d printing to make the installations cleaner, easier, and more practical all around. Showing 3d printing can be fun and practical. 3D printing my way to a smarter home, one dumb gadget at a time!Thanks to @Phaetus3D for sponsoring this video! Find their new products here: *** APUS 2 Extruder: phaetus.com/products/apus-2-extruder%C2%AE*** Conch Plus Hotend: phaetus.com/products/conch-hotend%E2%84%A2-plus*** SiC Nextruder Nozzle: phaetus.com/products/sic-nextruder-prusa-nozzle*** Phaetus' Site: phaetus.comProducts Featured (affiliate links):*** Prusa Mk4S: prusa3d.com/product/original-prusa-mk4s-3d-printer-5/#a_aid=MandicReally*** BigTreeTech Pad7: shrsl.com/4pwfy*** Ubiquiti G4 Doorbell Pro: bhpho.to/3UgUafF*** EcoBee Thermostat: bhpho.to/3YbwRVG*** B-Hyve Sprinkler Controller: amzn.to/4faiW9d*** TAPO Smart Switches: amzn.to/3UdMFWE*** ZOOZ Z-Wave Stick: amzn.to/48d1PkQ*** Matter Flashable Stick: amzn.to/3Ye7xhH-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro25:00 - OutroSome of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Fabled Creatures 3D Printable Halloween Decorations! MandicReally 2024-09-21 | Get the STLs for the Fabled Creatures Halloween decorations, desk statues, home decor, whatever you want to use them for NOW!STLs on @Thangs3D : thangs.com/designer/MandicReallySTLs on @Patreon : patreon.com/MandicReally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
#3DPrintingOnYouTube - Ultimate 3D Printer Q&A 2024! MandicReally 2024-09-21 | Angus over at @MakersMuse posted the #3dprintingonyoutube video asking 5 questions, so I'm going to answer them! Check out this video to learn my answers about 3d printers, 3d printing, and 3d printed parts. Hobby or tools? Advice? MORE!How it works: 1 - Answer the 5 questions (feel free to change it up or add your own experience into the mix!)2 - Upload a video to YT3 - Add #3DPrintingOnYoutube in the title or video description.... or share your answers in the comments below!Support My Content & Get the Fabled Creatures files!:*** Patreon: patreon.com/mandicreally/shop*** Thangs: thangs.com/designer/mandicreally*** YouTube Memberships on @MandicLabs: youtube.com/@MandicLabs-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- TIMESTAMPS:0:00 - Intro0:30 - Question 11:57 - Question 23:25 - Fabled Creatures & Support Shout-Outs4:47 - Question 37:35 - Question 49:09 - Question 511:39 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
3D Printing Helped me TOSS The Tripod! - One Stand YouTube Setup! MandicReally 2024-08-31 | The first 1,000 people to use my link will get a full year of Premium membership to Woodworkers Guild of America for only $1.49: go.wwgoa.com/mandicreally My new office space isn't very large, so how am I going to setup a full YouTube studio in a single bedroom? Well a one stand YouTube setup is going to help a lot! Saving floor space over tripods and light stands, this 1 stand youtube setup is a handy idea. Of course this being MandicReally, we have to involve 3d printing to make it even better. From 3d printed monitor mounts to a full UPS Battery Backup on 3D printed mounts! Let's build a one stand YouTube setup and use 3d printing to make it even better! Thanks to @BandH for providing hardware to make this build happen and to @Wwgoa for sponsoring this video!DSLR Video Shooter Original Video: youtu.be/FilRCidYDcw?si=wwRiFWo7etBjEWs3Featured Products: (Affiliate Links)*** Rolling C Stand: bhpho.to/3X7K8xZ*** Prusa Mk4 3D Printer: tinyurl.com/MrlyPrusa*** Super Clamp: bhpho.to/3z1V6NG*** Smallrig Clamp: bhpho.to/3TaF8rs*** Impact Grip Head: bhpho.to/3XsKD6b*** Impact Extension Arm: bhpho.to/3Xa6E9C*** Vice Grip Clamp: bhpho.to/3Z1LfC3*** Monitor Arm: bhpho.to/3Tc1pVP*** UPS Battery Backup: bhpho.to/4cMreT1*** 25 LBS Sandbag: bhpho.to/3Xar1nb*** Razer Thunderbolt 4 Dock: amazon.com/dp/B091BML59Y?ref=t_ac_view_request_product_image&campaignId=amzn1.campaign.IZZ21GTW973H&linkCode=tr1&tag=hotrodhippie-20&linkId=amzn1.campaign.IZZ21GTW973H_1725385514753*** Mic Boom Arm: bhpho.to/3z3llTL*** Tripod Head: bhpho.to/3X98sPX-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- TIMESTAMPS:0:00 - Intro1:05 - WoodWorkers Guild of America2:20 - The Stand Itself3:30 - Expensive Sandbag (UPS)5:47 - Stand Accessories6:07 - Tripod Head7:07 - Mic Arm7:45 - XLR Audio Interface8:28 - Microphone9:00 - A Gaming Monitor? Will it work?10:48 - Fusion 360 CAD Tip11:11 - 3D Print Slicing11:43 - 3D Printed Part Prep12:18 - Mounting the Monitor Arm14:05 - Light Mounting14:51 - Light Boom Arms15:22 - Beta 1.1 Stand15:58 - One More 3D Printed Mount16:34 - Razer Thunderbolt 4 Dock16:56 - Is it Stable?17:18 - Using the Stand18:18 - The Cost19:17 - Final Thoughts19:45 - OutroThe opinions expressed in this video are my own, from my personal experience. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
3D Print In Place Gargoyle Door Knocker! Halloween FREE STL! MandicReally 2024-08-25 | Gregor the Gargoyle lost his head, but don't worry it is going to good use! This model is a remix of the Gregor the Gargoyle statue from our "Fabled Creatures" collection. This version is a scaled up Door Knocker version. Great to decorate your household for the Halloween season! What better way to get in the holiday spirit than a spooky gargoyle head mounted to your front door? Very inviting for Halloween fun! Gargoyle Door Knocker STL: https://than.gs/m/1126454Gregor The Gargoyle Statue STL: https://than.gs/m/1122755-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Unboxing the Prusa XL #3dprinter #3dprinting #tech MandicReally 2024-08-22 | Let's unbox the @Prusa3D XL 5 toolhead 3d printer! This toolchanger 3d printer allows for true multi-material 3d printing and less wasteful multicolor 3d printing. What do you want to see me 3d print with the Prusa XL 5 tool version? See a Long form unboxing on @MandicLabs : Pickup a Prusa XL of your own (affiliate link): tinyurl.com/MrlyPrusa-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Office Build Begins: Solving 2nd Floor Heat w/ AC Infinity T12 fan! MandicReally 2024-08-18 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.In this first video of my Office Bedroom YouTube Studio build series, titled "Cooling My Studio: AC Infinity T12 Install," I tackle the common issue of a hot second floor by installing an AC Infinity Cloudline Pro T12 blower fan. The AC Infinity powerful fan is designed to improve airflow and reduce the temperature difference between floors, making my new home studio more comfortable and efficient. Watch as I walk you through the installation process and explain how this setup will keep my workspace cool while I continue to build out my YouTube office bedroom studio. Is the AC Infinity fan quiet? Will this blower fan be too loud for my use case? Let's find out! If you're dealing with uneven home temperatures between floors or planning your own studio, this video is a must-watch!*** Thanks to @Vitalii3D Etsy: etsy.com/shop/Vitalii3D-----------------------------------------------------------------------------------------------Products Featured (Affiliate Links):*** @acinfinity Cloudline Pro T12 Fan: amzn.to/4dsiFhB*** AC Infinity 12" Flexible Ducting: amzn.to/4dPgvse*** Decibel Meter: amzn.to/4dpItux*** Prusa Mk4 3D Printer: tinyurl.com/MrlyPrusa-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro1:37 - Brilliant Ad Spot3:11 - Why?6:33 - AC Infinity Cloudline Pro T12 Specs7:38 - Thanks Vitalii!8:09 - Bench Sound Test9:00 - Installation Prep11:04 - 3D Printed Vibration Isolaters12:59 - Fan Instll14:46 - Noise Level In Situation16:36 - Automatic Control18:18 - Office Temperature Testing19:36 - Hot Second Floor FIXED!20:09 - Office Fixes?21:45 - OutroThe opinions expressed in this video are my own, from my personal experience. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
NEW Studio, NEW Network! Mandic Lab 1.0 Begins! MandicReally 2024-07-29 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.Mandic Lab 1.0 is here and the build has begun! Let's start making this the ultimate YouTuber 3d printing makerspace workshop! (more words too!) Project number 1 is getting the networking in ship shape thanks to @UbiquitiInc! Wifi 7, POE, Security Cameras, and plenty of switch ports! Products Featured (In Appearance Order - affiliate links):*** Ubiquiti UCI: store.ui.com/us/en/collections/unifi-internet-solutions/products/uci*** Ubiquiti Dream Machine Pro: bhpho.to/3A4vCiL*** Ubiquiti Pro Max 24 POE: bhpho.to/3A32TLh*** 54" Installer Flex Drill Bit: amzn.to/3WqxA4A*** Hole Saw Set: amzn.to/4c5swbo*** Midwest Aviation Snips: amzn.to/3WHwl2n*** Wire Fish Tape: amzn.to/3WGHQXO*** Ubiquiti U7 Pro AP: bhpho.to/3LJZx2i*** Prusa Mk4 3D Printer: amzn.to/3Sravxf-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro1:45 - Brilliant.org/MandicReally3:19 - Out with the Old4:19 - In with the NEW HARDWARE!6:05 - Cable Run Planning9:43 - To the Attic!12:26 - U7 Pro AP Install13:43 - U7 Pro Explained15:37 - Running Cables Through Walls19:35 - I've got a Problem here...21:33 - The Solution22:12 - 3D Printed Cable Organizers22:48 - UnifiOS Thoughts23:41 - Pro Max 24 POE Thoughts24:43 - Ubiquiti, I love you25:44 - Security Cameras?26:41 - Outro27:11 - BloopersThis video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
GOODBYE! The LAST Studio Tour! MandicReally 2024-06-29 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.It is time to say GOODBYE! Parting is such sweet sorrow and all that. We are moving cross country from Philadelphia PA to Portland OR, which means leaving behind the original "Mandic Lab" studio space. Let's take one final look at my maker 3d printer YouTube Studio in this shop tour video. I'll show you behind the scenes of a 3D printing makerspace and a bit of how the videos are made, complete with audio and video equipment.-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
How to SAFELY Move 3D Printers Cross Country! MandicReally 2024-06-26 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.The time has come to move my ENTIRE STUDIO across the country! From Philadelphia PA to Portland OR! That means I need to consider how to safely transport my custom built 3D printers as well. These 3d printing machines are strong but surprisingly delicate. How does one safely move with custom 3d printers like my Vorons? Building crates is the way I've chosen, so let's get them built.@247printing's RatRig Video: youtu.be/aPCZaBKkqR0?si=vzUG080ZzsSpvgEQ-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:51 - Consider the Bed!2:19 - Brilliant Ad Spot3:58 - Secure Moving Parts6:28 - Toolhead Positioning8:15 - Crate Base9:39 - Printer Hold Downs10:30 - Crate Continues12:30 - The Missing Detail!13:04 - OutroThe opinions expressed in this video are my own, from my personal experience. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.This video is sponsored by Brilliant.org#mandicreally
3D Print Your Dream Car Parts Now MandicReally 2024-06-01 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.In this video we will revisit and revise the custom 3d printed car parts on my Dad's 1965 GMC custom truck build. A custom gauge cluster? DIY AN hard line clamps? 3D printers can solve all your problems! Ok... some of them anyway. Let's look at past mistakes and how I can correct them on this 1965 C10 Build!*** Clamp STL Files: https://than.gs/m/24022-----------------------------------------------------------------------------------------------Parts Used (some affiliate links):*** @3dgloop: 3dgloop.com*** Polymaker Filament: tinyurl.com/Polymakerr *** 10-32 Screws: amzn.to/3KnQfYW*** 10-32 Nuts: amzn.to/3ANJ3Pa-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro1:03 - CookieCad V02:02 - Brilliant Sponsor Spot3:39 - 3D Printed Gauge Cluster4:57 - Gloop-ing6:31 - Heat Pressing6:49 - North Carolina Traveling7:30 - And it all went wrong...8:23 - 3D Printed Parts on the Truck9:07 - Old Material Choice9:25 - NEW Polymaker Material Choice11:23 - Printing New Car Parts12:23 - Assembling Line Clamps13:16 - Final Plans14:03 - Announcement!14:30 - OutroSome of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
How 3D Printing SAVED My Marriage! MandicReally 2024-05-13 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.My Marriage is in DANGER! Thermal danger that is... My partner prefers to be warmer than I do and summer is coming in quickly, so we need to SAVE MY MARRIAGE with 3D Printing! In this video we will discuss the hvac issue I have in my marriage, design a fix in AutoDesk Fusion 360, 3d print a repair part to solve our problem, and install the 3d print to see if it worked! Follow the journey as I design a 3d printed part to move us toward marital bliss.-----------------------------------------------------------------------------------------------Products Featured (Affiliate Links): *** Polymaker PolyDryer: tinyurl.com/PolyDryer*** Polymaker ASA Filament: tinyurl.com/PolymakerASA*** Voron 2.4 3D printer: fabreeko.com/products/ldo-voron-v2-4-kit?variant=42263240704255-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Disclaimer: This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Shocking Reveals from Rocky Mountain RepRap Fest! MandicReally 2024-05-04 | The second annual @rockymountainrrf just occurred and there was a LOT of excellent stuff to see, let's check it out in this video! Thanks to @ldomotorsjason3488 for sponsoring this video & my trip to RMRRF 2024! In this one we will see new products from @MicroSwissLLC, @SliceEngineering, LDO Motors, @beaconscanner. As well as some other neat RepRap / Maker projects & new products from new brands!Links to Featured Stuff: *** Swiss 3DC - DHB: swiss3dc.com*** Slice Engineering Mako: sliceengineering.com/pages/mako*** Armchair Engineering Discord: discord.gg/QpG5XEYT*** Beacon Bed Scanner: beacon3d.com*** Hedgehog Makes: youtube.com/channel/UCx_uzh8inChAO-fQk3W8Edg*** StealthChanger Project: github.com/DraftShift/StealthChanger*** 3D Printing Nerd: youtube.com/channel/UC_7aK9PpYTqt08ERh1MewlQ*** LDO Motors: ldomotion.com/p/home-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:58 - LDO Motors2:31 - NEW Quick Nozzle System! - Swiss3DC4:17 - Beacon Scanner5:45 - 3D Printing Nerd's Game7:20 - StealthChanger - Hedgehog Makes8:21 - Slice Engineering Mako9:47 - 8 Wheel Drive!11:02 - FlyCron - FLYING Gantry 3D Printer!13:12 - MicroSwiss Neptune 4 Pro Hotend14:18 - Voron Cascade CNC!15:08 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
FIRST LOOK at RatRigs V-Core 4! MandicReally 2024-04-29 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . You’ll also get 20% off an annual premium subscription.The folks at @ratrighardware have launched V-Core 4, their latest line of 3d printers, and we got to take a better look at it at @rockymountainrrf 2024! Check out this video to learn a bit more about the all new platform from RatRig. How they are using 4 motors to producing higher acceleration 3d printing, but NOT running AWD on their printer. "Hybrid Core-XY" what is that? Watch to learn more and how it more easily be upgraded to IDEX!Learn more here: v-core4.ratrig.com-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:30 - Brilliant Sponsor Spot2:00 - V-Core 4 Basics2:26 - Hybrid Core-XY3:50 - Upgrades IDEX & More4:47 - ToolShift Rapid Toolhead Swaps5:31 - Build Volume Options5:42 - MMU, Aux Fans, Chamber Heater, & More!6:07 - Electronics & Wiring Simplified6:26 - Final Thoughts7:04 - Outro*** This video was sponsored by Brilliant ***Disclaimer: This is not a paid advertisement for RatRig. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Exciting Reveals: BigTreeTech Innovations @ RMRRF 2024! MandicReally 2024-04-26 | The folks at @bigtreetech5117 have launched a slew of new products ahead of @rockymountainrrf 2024, let's check out their booth and see what's NEW! From an entirely new SBC to control your Klipper Powered 3D Printer, to a Bed "Scanner" that will get your bed leveled in under 20 seconds, and MORE!Thank you to BigTreeTech for sponsoring my trip to RMRRF 2024! https://biqu.equipment/Products Featured (Affiliate Links):*** CAN Expander Board: shrsl.com/4i911*** Eddy Bed Level Sensor: shrsl.com/4i90z*** BigTreeTech Pi2: shrsl.com/4i912*** SKSM - Safe Klipper Shutdown Module: shrsl.com/4i914*** Universal Turbo Fan Kit: shrsl.com/4i915*** Panda Flow CHT: shrsl.com/4i916*** HBB Macro Buttons: shrsl.com/4i91e-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:31 - CEB1:36 - Eddy Bed Sensor2:22 - Universal Turbo Kit3:34 - SKSM4:10 - Biqu Panda Flow CHT4:57 - HBB Macro Buttons5:22 - Pi2 / CB27:22 - OBICO7:44 - OutroThis video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Ikea Hacking w/ 3D Printing! - Desk & Litter Box Upgrades! MandicReally 2024-03-03 | Now is the best time to buy FlexiSpot Ergonomic Chair. 30 days free return, try it with confidence! Use code "C730" for $30 off!FlexiSpot C7 Premium Ergonomic ChairUS: shrsl.com/4mlrvCA: bit.ly/42XuwQaMy Shipping Desk needs an OVERHAUL! In this video we will use 3D printing to revamp my entire shipping station from top to bottom. Including embedding steel into 3d prints to reinforce them, Ikea hacking, helping out our cats, and more! Let's see how practical 3d printing can make a functional desk setup and ikea hacked hidden litter box setup.*** Poo Portal 2.0 FREE STLs: https://than.gs/m/1025489-----------------------------------------------------------------------------------------------Parts Used (affiliate links):*** Polymaker Filament: tinyurl.com/Polymakerr*** M5 Hardware: amzn.to/49EPJRE*** M5 Roll-in Nuts: amzn.to/4a0wsd7*** Aluminum Extrusions: openbuildspartstore.com/?ref=dVHJ_D73yf0hwn*** iMac VESA Mount: amzn.to/3wE8Dcz*** FlexiSpot C7 Chair: shrsl.com/4mlrv-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro1:07 - The Concept Sketch2:10 - Ikea Hacking w/ 3D Printing6:24 - FlexiSpot C7 Chair Sponsor Spot8:37 - Embedding Steel in 3D Prints13:00 - Desk Riser Construction16:08 - Desk Riser Install17:32 - 3D Printed iMac VESA Mount18:21 - Finishing Details20:39 - Final Results!21:07 - Final Thoughts22:50 - Outro#mandicreally
Linus Made This Look EASY - One Cable Live Streaming Setup! MandicReally 2024-02-24 | Linus made a single cable PC setup look EASY, it is NOT! Follow along as I update my live streaming setup with a single optical cable from Pure Fi & a Thunderbolt Dock from @razer ! Along with the addition of an AI powered robot camera! All streaming through just one single cable back to my workstation / streaming pc. Thanks to @OBSBOT for sponsoring this video! #obsbot_tail-air #tripod #streamwithobsbotCheck out the OBSBot Tail-Air: amzn.to/3USo37kSave 5% with Code: OBSBOT2024Or get it on OBSBot's Site: obsbot.com/store/products/obsbot-tail-air?rfsn=7867631.f068a7&utm_source=refersion&utm_medium=affiliate&utm_campaign=7867631.f068a7Save 5% with Code: MandicReallyA-----------------------------------------------------------------------------------------------Parts Used (Affiliate Links):** @PureFiAOC USB4 Cable: pure-fi.com** Razer Thunderbolt 4 Dock: amzn.to/42R1H80** Polymaker Filament: http://tinyurl.com/Polymakerr-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:40 - Current Setup1:23 - The LTT Problem1:50 - Pure Fi Optical Cables2:45 - ONE Cable Install3:26 - Razer Chroma Dock4:44 - 3D Prints5:18 - Tiny ROBOT! OBSBot Sponsor Segment7:40 - Cable Management9:30 - Linus Made This Look EASY10:34 - Was this worth it?12:14 - OutroThe opinions expressed in this video are my own, from my personal experience. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.All music under license from EpidemicSound.com
Chaos to Creativity: My Ultimate 3D Printing Studio! MandicReally 2024-02-10 | My 3D printing YouTube studio is a mess, plain and simple. In this video we will tackle the disaster and build a new main set for my videos! Complete with toolboxes for organizing 3d printer parts and tools. As well as 15 foot long RepRack 3d printing filament storage and a workbench for BIG 3D printers! What could we add to make this even better? Let us know in the comments so we can make the ULTIMATE 3D Printing YouTube Studio Setup!Patreon: https://www.Patreon.com/MandicReally-----------------------------------------------------------------------------------------------Products featured:*** 4" Framing Screws: sovrn.co/d4gx4up*** RockWool Insulation: sovrn.co/1fkoref*** Cybepower 1500va UPS: bhpho.to/3HVV7Dx*** 14ga Power Cables: amzn.to/498kMVr-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
ULTIMATE Bambu X1 - Sub-10 Minute Benchys! MandicReally 2024-01-20 | What does the ULTIMATE Bambu X1 look like? Well in this video we will build MY Ultimate @BambuLab X1 Carbon. Faster, Cleaner (air), Better Cooling, and more Reliable! Less stinky fumes, more fast filament feeding. We will also revisit the @E3DOnline ObXidian High Flow Hotend! Speeding our way down to sub-10 minute Benchys! Along with some easy 3d printable mods of my own design. *** My FREE STLs for the Bambu X1: thangs.com/mandicreally*** 3MF of Sub-10 Min. Benchy: https://than.gs/m/995234 (No claims of ownership to the 3D Benchy Design!)*** Full 9 : 53 Benchy Print Video: youtu.be/rZnUjMMxY60*** Bento Box Filter: http://tinyurl.com/BentoBoxHepaParts Used (some affiliate links):*** Bambu Lab X1 Carbon: http://tinyurl.com/BambuLabShop*** Sanyo 4020 Fans: http://tinyurl.com/Sanyo-4020*** E3D High Flow Hotend (exp. Feb 2024): e3d-online.com/?aff=23*** AliExpress Hotend: https://s.click.aliexpress.com/e/_DBfcMBJ*** BEN2C Fan Duct: http://tinyurl.com/BEN2C-Duct*** Fysetc Hardened Gears: https://s.click.aliexpress.com/e/_Dlm9Z2h*** Noctua 4020 Fan: amzn.to/47NbqNs*** Polymaker Filament: http://tinyurl.com/PolymakerASA*** Nevermore Carbon: https://collabs.shop/yqfbva*** Hepa Filters: amzn.to/47KTW4q-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/4avDFmt*** Video Recorder: bhpho.to/3Oa4qmZ*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/48YMmnD*** Studio Microphone: bhpho.to/4216F1z*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3 *** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/3S77IbO*** Drone: bhpho.to/423XrS6----------------------------------------------------------------------------------------------- TIMESTAMPS:0:00 - Intro1:25 - BentoBox5:06 - Chamber Block-Offs6:29 - Wiring BentoBox to the Chamber Fan7:37 - Fresh Air Fan Mount8:12 - Fysetc Extruder Gears11:12 - Hotends Begin11:42 - Flowrate Testing Explained14:34 - AliExpress High Flow Hotend17:22 - Flowrate Test Results19:22 - E3D ObXidian High Flow Results20:20 - ASTERISK - Results WILL VARY20:49 - Buy Once, Cry Once21:38 - E3D High Flow PROBLEM22:42 - BEN2C Cooling Duct26:15 - ULTIMATE X1 Slicer Setup Tips27:44 - SUB-10 Minute Benchys!29:01 - Worth it?30:06 - Why High Flow?31:00 - Final Thoughts31:45 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Discover the Lumix G9II: Insights from a GH6 Owner MandicReally 2023-12-23 | Is the @LumixUSA G9II a better video camera than the GH6? Is the G9 Mk 2 best Hyrbid Micro 4/3rds camera on the market today? Or is the G9 mk II a stop gap camera and is Micro-43 dead in 2023? In this, I will present my experience with the G9II as a GH6 owner and a professional Micro 4/3 shooter. Thanks to @BandH for the loaner camera used to test & make this video! (Not Sponsored)Affiliate Links for Products Featured:*** G9 II: bhpho.to/3GWj6C7*** GH6: bhpho.to/3RStTnz*** 10-25mm F1.7 Lens: bhpho.to/4avDFmt*** 9mm F1.7 Lens: bhpho.to/3ttIBHU*** 128GB CF-Express Card: bhpho.to/41yaqeI*** 128GB UHS-II SD Card: bhpho.to/3RW3DrO*** Samsung T7 SSD: bhpho.to/3RwDCOF-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:29 - My Perspective1:15 - Cons1:50 - Tally Lamps2:43 - Controls3:24 - SD Cards?4:35 - Shutter Angle4:50 - CON Auto Focus...5:50 - PROS: Auto Focus!8:37 - Image Stabilization9:45 - Improved Image Quality11:10 - Battery Life12:10 - Photo Quality13:20 - Final Thoughts13:49 - ConclusionThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Festive Fast: 3D Printing Christmas Decorations! MandicReally 2023-12-19 | What do you do when you are late decorating for the Christmas Holiday Season? Well 3D Print some Holiday Decorations fast, of course! In this video we will decorate my home, xmas tree, and studio with some 3d printed designs to make everything more festive this holiday season! Designs featured:*** CDMakeStufBulbs: etsy.com/shop/cdsmakestuff*** 10mm Ornament: https://than.gs/m/975540*** Bob-Omb Ornament: https://than.gs/m/975534*** Kirby Ornament: https://than.gs/m/975542*** LEtGO Holiday Wreath: https://than.gs/m/966831*** My Designs: thangs.com/designer/MandicReallyProducts Featured (Affiliate Links):*** Lights Required for BIG Bulbs: amzn.to/4arzNms*** @bondtechab CHT Nozzles: shrsl.com/4cnh0*** @greengate3d Filament: greengate3d.com*** @Polymaker Filament: https://us.polymaker.com?aff=28-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- TIMESTAMPS:0:00 - Intro1:00 - BIG Printing Starts2:15 - LEtGO Holiday Wreath3:30 - X-Mas Tree Ornaments5:39 - BIG Bulb Assembly7:30 - Hanging the Lights8:35 - ConclusionThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
REAL High Flow Bambu Hotend from E3D?!? - Install & Test AT E3D MandicReally 2023-12-06 | What if I told you that @E3DOnline & @BambuLab teamed up to make a High Flow wear resistant hotend nozzle design? Well get excited, because that isn't a hypothetical! The new E3D Bambu Lab Hotend featuring High Flow Bondtech CHT technology & E3D's "ObXidian" uber wear resistant coating. In this video we will travel to E3D's factory in Oxford England to see it, install it, and test it! Will the new High Flow ObXidian Bambu Hotend flow significantly more filament on your P1P, P1S, or X1 Carbon 3d printer? Watch to find out!Products Featured:*** E3D ObXidian Bambu Hotend: e3d-online.com/?aff=23*** Bambu Lab 3D Printers: tinyurl.com/BambuLabSite*** MandicReally Patreon: patreon.com/MandicReally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:49 - High Flow ObXidian Bambu Hotend1:30 - Stock Bambu Rant...2:34 - Unboxing the Hotend3:15 - Installation4:29 - Flowrate Test Disclaimer4:57 - Sponsored by YOU!5:41 - Flow Test Results Compared6:55 - Availability & Pricing7:47 - ConclusionThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
I Made a MASSIVE Modular 3D Printer Enclosure MandicReally 2023-11-28 | Printable Accessories Kickstarter Campaign: tinyurl.com/ModularEnclosureThanks to Crate3D / Printable Accessories for Sponsoring this video.What would you put in a Modular 3D Printer Enclosure like this one from the folks at Printable Accesories? Maybe a Resin 3D printer? Your old Ender 3 like me? Or GO BIG like I did and live in it? The world is your oyster when you have a modular system to configure how you want.-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally #Crate3D
STEEL Reinforced 3D Print - Ultimate Workbench Build! MandicReally 2023-11-25 | ❗FlexiSpot Amazon Black Friday Deal Up to 70% OFF❗ Free orders Nov.24 & Nov.27🎁US Site: shrsl.com/4mlak Canada Site: amzn.to/3GbnOM5We need to build a better bench, and in this video we will do just that! Customizing my workbench in the studio for 3d printer build projects, using steel reinforced 3d prints! Yep, embedding steel into 3d printed parts to make them stronger & customize my desk setup. Modular and customizable extrusion mounts at each end of the desk, and more! Featured (Affiliate Links):*** FlexiSpot Standing Desks: shrsl.com/4mlak*** xTool P2 Laser: tinyurl.com/xToolP2Laser*** Weller Soldering Station: amzn.to/3sHZ3nD*** Desktop Power Supply: amzn.to/47KEiXH*** MacBook Pro 14": bhpho.to/47QNj0N*** Acer Nitro Monitor: bhpho.to/40Xp7Yl-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally #blackfriday #amazon #standingdesk #flexispotus
Im Giving Away THIS Voron! SMRRF 2023 in Oxford England! MandicReally 2023-11-22 | Do you want to win this Fysetc Voron 0.2? Head over to the @E3DOnline Sanjay Mortimer RepRap Festical on December 2nd or 3rd & enter the raffle for a chance to win! All proceeds go to the Sanjay Mortimer Foundation official charity. Hope to see you there folks!Items Featured (affiliate links):*** E3D Revo Voron: shrsl.com/4bhgc*** Fysetc Voron 0.2: shrsl.com/4b05f*** xTool P2 CO2 Laser: tinyurl.com/xToolP2Laser-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
3D Printing Black DEALS 2023 - Bambu, Qidi Tech, Elegoo, & More! MandicReally 2023-11-18 | The Holidays are here (and longer than ever), as area Black Friday deals! This year we have some great discounts on a range of 3D Printers & 3D Printing accessories a full WEEK before Black Friday. Check out this video to see some discounts on 3d printer, 3d printing, and 3d printed items for yourself or that special maker / diy person on your Christmas shopping list!Deals (Affiliate Links):*** Bambu Lab Sales: tinyurl.com/BambuBlackFriday*** Bambu Lab P1S for $599: tinyurl.com/BambuP1S*** Qidi-Tech BF Sales: https://t.co/UU95blvelu Use Coupon Code: QIDI20 to save an additional $20 on $699 or more.*** Elegoo Neptune 3 Max for $379.99: tinyurl.com/Neptune3Max*** Elegoo Neptune 4 Pro: tinyurl.com/Neptune4Pro*** ISOTunes 30% off w/ Code "VIP30": shop.isotunes.com/mandicreally*** AnkerMake M5C for $319: shrsl.com/4b839*** Creality K1 for $399: shrsl.com/4b844*** Sovol Machines on Sale: sovol3d.com/collections/sale?sca_ref=4845212.ujcP1pENMx-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- 0:00 - Intro0:37 - Bambu Lab2:21 - Qidi Tech3:40 - Elegoo5:31 - IsoTunes7:12 - AnkerMake8:28 - Creality10:11 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally #BlackFriday
Is this the BEST Budget Voron 0.2 kit? - Fysetc V0.2 R1 Pro Review MandicReally 2023-11-14 | In this video, we're going to be testing the Fysetc Voron 0.2 Pro R1 kit. This is a budget-friendly Voron Design V0.2 3d printer kit aimed at being a good but cheap kit. Check out this review to see what goodies Fysetc crammed into this V0.2r1 Pro Kit & where they missed the mark. *** Hex Mid Panel STLs: https://than.gs/m/960156*** Side Skirt with Ports STL: https://than.gs/m/960841*** Fysetc Instructions & Files: github.com/FYSETC/FYSETC-Voron-0.2-Pro-----------------------------------------------------------------------------------------------Products Featured (Affiliate Links):*** Fysetc Voron 0.2 Pro R1 Kit: shrsl.com/4b05f*** Machined V0 Bed Frame: https://s.click.aliexpress.com/e/_DDYulGf*** CNC Voron X Gantry: https://s.click.aliexpress.com/e/_DC3HJxV*** CNC POM Extruder Gear: shrsl.com/4b05j*** Polymaker ASA Filament: tinyurl.com/PolymakerASA-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:39 - Unboxing0:57 - X Gantry1:51 - Bed Frame2:36 - Building3:07 - Hex Mid Panel4:24 - Build Notes & Instructions4:51 - BAD Prints6:39 - Build B-Roll7:21 - RePrints7:54 - Bed8:17 - Hotend9:30 - Extruder Gears10:13 - Toolhead PCB10:51 - Fysetc Catalyst Board12:04 - Bad About It13:20 - Pigtail Cables14:09 - Motor Noise15:03 - Input Shaper Charts15:25 - Is it Worth It?16:25 - Print Quality16:47 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.#mandicreally
Leveling Up A Tattoo Studio w/ 3D Printed Ink Racks! MandicReally 2023-11-01 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.Let's get Organized with 3D Printing! My friends have a tattoo ink problem, almost as bad as my 3d printer filament issue... In this video I will show you some of my 3d design process for Tattoo Ink Storage Racks that I 3D Printed & installed in HoundsTooth Tattoo Philadelphia! Check it out for some 3D design tips and to see a Practical 3D Printing application to help get tattoo ink (or your paint supplies) organized and stored.Bits & Pieces Used (Affiliate Links):*** Elegoo Filament: shrsl.com/4acs4*** Bambu X-1: tinyurl.com/BambuX1Carbon*** xTool P2 Laser: tinyurl.com/xToolP2Laser*** Qidi X-Max 3: https://s.zbanx.com/r/w2W7S4WHluaX-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links -----------------------------------------------------------------------------------------------Filmed with (Affiliate Links):*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Video Recorder Used: amzn.to/46kQKN1*** Action Camera: amzn.to/46liiBG*** Wide Angle Lens: amzn.to/45llUSX*** Slider: amzn.to/3nGZ1Uh*** Studio Microphone: amzn.to/3ZJbMlY*** Voiceover Microphone: amzn.to/3ZJccc2*** Monopod - amzn.to/3PK4IAW *** Tripod: amzn.to/3rMgvXh*** Primary Lighting: amzn.to/3LN6zDO *** Additional Lighting: amzn.to/3rIVcGk*** RGB Lights: amzn.to/3LPGmoj*** Drone: amzn.to/46l13Ax----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro0:33 - Measuring1:45 - Brilliant Ad Spot3:02 - Designing IRL4:57 - Fusion 360 Scaling TRICK!7:51 - Completed Design9:05 - Designing FOR 3D Printing11:43 - 3D Printing12:01 - Heat Press Inserts12:23 - Elegoo Filament14:01 - Assembly14:52 - LASER BEAMS!15:43 - Installation16:07 - Final Thoughts16:44 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.Eternal Ink Paint Rack & Storage. Useful 3d prints. #mandicreally
Bambu P1P to P1S Upgrade: Hidden Flaw Exposed! MandicReally 2023-10-22 | If you're looking to upgrade your Bambu P1P to P1S, WATCH THIS VIDEO FIRST! Our "Bambu P1P to P1S Upgrade has 1 BIG Flaw!" video will show you what's wrong with the current P1P to P1S Upgrade Kit process and how you can avoid it!By watching this video, you'll be able to save yourself time and hassle that we had to endure. We know how important it is to get your P1P to P1S upgrade done correctly, so make sure to watch our video before you make any decisions!STL Files:*** LED Light Housing: printables.com/model/359020-bambu-lab-p1p-modified-led-mount-20-418-updated*** No-Support Fan Housing: printables.com/model/427552-chamber-fan-duct-for-p1pp1s-no-supportProducts Featured (affiliate links):*** Bambu Lab P1S: tinyurl.com/BambuP1S*** Bambu Lab P1P: tinyurl.com/BambuLabP1P*** P1P to P1S Upgrade Kit: tinyurl.com/p1ptop1s*** Bambu X1 Carbon: tinyurl.com/BambuX1Carbon-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/3FhSfjc*** Video Recorder Monitor: bhpho.to/3RW0Yii*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/3ZRRIhi*** Studio Microphone: bhpho.to/3PUL3yb*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3*** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/46S6VBn*** Drone: bhpho.to/476GGr1----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.TIMESTAMPS:0:00 - Intro1:51 - Cable Chain Install4:00 - Front Panel Removal4:16 - Door Hinge Install4:36 - Auxiliary Fan Wiring5:12 - Left Panel Install5:41 - Support Shout-Out!6:43 - Axuliary Fan Install6:57 - Interior Trim Install7:10 - Motherboard Fan Install7:37 - Right Side Panel7:45 - The BIG FLAW RANT!8:58 - The FIX!9:16 - Chamber Fan Install9:56 - Reassembly10:26 - New Front Panel10:55 - Front Door Install11:32 - Final Steps11:48 - FIRST 3D Print12:26 - Why Upgrade your P1P?14:10 - Outro#mandicreally #3dprinter #bambulab
Big AND Fast! - Elegoo Neptune 4 Max LIVE Unboxing MandicReally 2023-10-21 | The NEW @ElegooOfficial Neptune 4 Max 3d printer is here, so let's unbox it LIVE! This new 3d printer is here to serve your large 3d printing needs. Whether it be printing cosplay parts in one piece, big household items, or just giant flexi dragons! Let's check out if this Klipper firmware powered Elegoo Neptune 4 Max is any good. What mainboard is Klipper running on? What hotend combo is this machine running? Let's find out LIVE!Products Featured (Affiliate Links):*** Neptune 4 Max: tinyurl.com/Neptune4Max*** Neptune 4 Plus: tinyurl.com/Neptune4Plus*** Neptune 4 Pro: tinyurl.com/ElegooNeptune4Pro*** Elegoo Filament: tinyurl.com/ElegooPLAFilamentPlease consider supporting on Patreon: patreon.com/mandicreally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/3FhSfjc*** Video Recorder Monitor: bhpho.to/3RW0Yii*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/3ZRRIhi*** Studio Microphone: bhpho.to/3PUL3yb*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3*** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/46S6VBn*** Drone: bhpho.to/476GGr1----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.#MandicReally #3DPrinting #3DPrinter
ERRF 2023 in 1 Hour! MandicReally 2023-10-15 | After being trapped at my booth all weekend long, I got ONE HOUR to see all of the East Coast RepRap Festival 2023! Follow along as I show you the interesting things I saw & learned about in that one hour at ERRF 2023! 3D Printers, 3d printer parts, maker projects, diy at every corner, so much to see and so many things to check out at ERRF! Revo hotends for Bamub Lab 3d printers? Filament painting with HueForge? DIAMONDS with E3D Revo hotends? HIGH FIVES WITH JOEL TELLING?!?-----------------------------------------------------------------------------------------------Featured (some affiliate links):*** Peopoly Magneto X: peopoly.net/products/magneto-x*** E3D Hight Temp: e3d-online.com/products/revo-high-temperature-hotside?aff=23*** CocoaPress: cocoapress.com*** PandaRevo: shrsl.com/49kw7*** 3DHub.CA: https://3dhub.ca?sca_ref=2790866.Fjs3GE1r9G*** Fabreeko: fabreeko.com*** HueForge: shop.thehueforge.com*** Prometheus MSLA: github.com/TheContrappostoShop/Prometheus-MSLA-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/3FhSfjc*** Video Recorder Monitor: bhpho.to/3RW0Yii*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/3ZRRIhi*** Studio Microphone: bhpho.to/3PUL3yb*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3*** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/46S6VBn*** Drone: bhpho.to/476GGr1----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally, but helps support further video production.TIMESTAMPS:0:00 - Intro0:16 - CocoaPress0:29 - Open Source RESIN Printer?!0:51 - @TripodsGarage 1:35 - @ldomotorsjason3488 2:25 - Discussing the Trident Build!2:55 - HueForge4:07 - Fabreeko4:25 - 3DHub.CA5:06 - @E3DOnline 5:56 - @bigtreetech5117 6:49 - @peopoly 7:53 - @lightburnsoftware7189 8:28 - Creator Corner9:13 - HIGH FIVE w/ @3DPrintingNerd 9:48 - Camera Setup10:13 - Outro#mandicreally
3D Print Prototyping: Test Fitting #3dprinted Parts for Success! MandicReally 2023-10-10 | In this video, we'll be using 3D printing to test fit a 3D printed part. By doing this, we'll be able to ensure that the part fits correctly and correctly prints.This is an excerpt from a FULL video about building my "Ultimate Standing Desk": youtu.be/JAjd9ZfxfpQ?si=JzJuWmXG9DZuk6Z83D printing is a great way to test parts before you print them in plastic. By testing the part before you print it, you can reduce the chances of errors and bad prints. This video is a great way to learn how to test fit 3D printed parts and ensure that your prints are accurate!
Building a Voron Trident LIVE at ERRF 2023! #3dprinter MandicReally 2023-10-07 | Building a Voron Trident LIVE at ERRF 2023? What a mad, mad idea! Follow along as I prep for building this 3d printing live in front of folks at East Coast RepRap Festival 2023. Can we build an LDO Motor Voron Trident in such a short time? Watch to find out!Thank you to:@ldomotorsjason3488 : ldomotors.com@SteveBuilds : youtube.com/c/stevebuilds@MicroSwissLLC : store.micro-swiss.com@kb3d : kb-3d.com@west3dprinting219 : west3d.com-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with (Affiliate Links):*** Main Camera: bhpho.to/3RStTnz*** Main Lens: bhpho.to/3FhSfjc*** Video Recorder Monitor: bhpho.to/3RW0Yii*** Action Camera: bhpho.to/45CS10Q*** Wide Angle Lens: bhpho.to/3RXQXBj*** Slider: bhpho.to/3ZRRIhi*** Studio Microphone: bhpho.to/3PUL3yb*** Voiceover Microphone: bhpho.to/46uECsE*** Monopod: bhpho.to/3PT2yir *** Tripod: bhpho.to/3PSKXY4*** Primary Lighting: bhpho.to/3RXSmb3*** Additional Lighting: bhpho.to/3RXVfsf*** RGB Lights: bhpho.to/46S6VBn*** Drone: bhpho.to/476GGr1----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
FAST Core-XY Ender 5 Plus! Mercury One.1 Build MandicReally 2023-09-30 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.My Creality Ender 5 Plus was my most reliable printer... so I tore it apart! Let's build a @ZeroG3D Mercury One.1 out of my old trusty Ender 5+ 3d printer! Core-XY like a Voron or RatRig, CAN toolboard from BigTreeTech, an E3D High Flow hotend and so much more! Will it be a beast of a 3D printer? Or a beast of a burden? My FREE STL Designs for this build: thangs.com/designer/mandicreally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Parts for this Build (some Affiliate Links): *** @lore2486 Mercury One.1 Kit: tinyurl.com/MercuryOneKit*** @ldomotorsjason3488 Orbiter V2.0 Extruder: tinyurl.com/Orbiter2*** @bigtreetech5117 SKR3EZ Board: shrsl.com/48vrl*** @bigtreetech5117 EBB36 Toolboard: shrsl.com/48vrm*** @E3DOnline Revo Six Hotend: e3d-online.com/products/revo-six?variant=39800219336763&aff=23*** @E3DOnline Revo High Flow: e3d-online.com/collections/revo-high-flow?aff=23*** @preciseprinterparts6355 Bed: preciseprinterparts.com/creality-ender-5-plus--cast-printer-bed.html ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- This video was sponsored by BrilliantThe opinions expressed in this video are my own, from my personal experience. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.#3dprinter #mercuryone #ender5plus
Remix Contest Winner! - Random Chat Stream! MandicReally 2023-09-10 | In this stream we will announce the WINNER of my recent Thangs Remix Contest. I challenged folks to Remix my "BLANK Can Cup" and offered up an Elegoo Neptune 4 Pro as the prize. Check out the stream to see who won and learn more.Links:Free 3D Designs by Me: thangs.com/mandicreallyElegoo Neptune 4 Pro: tinyurl.com/ElegooNeptune4Pro (affiliate link)
Remix Contest Winner! - Random Chat Stream! MandicReally 2023-09-09 | In this stream we will announce the WINNER of my recent Thangs Remix Contest. I challenged folks to Remix my "BLANK Can Cup" and offered up an Elegoo Neptune 4 Pro as the prize. Check out the stream to see who won and learn more.Links:Free 3D Designs by Me: thangs.com/mandicreallyElegoo Neptune 4 Pro: tinyurl.com/ElegooNeptune4Pro (affiliate link)
6 Easy Tips to Make Your 3D Designs Extraordinary! Pro Tips MandicReally 2023-08-31 | To try everything Brilliant has to offer—FREE—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.In this video we will discuss 6 Pro Tips to make your 3d designs extraordinary! Take your 3d designs up a notch & catch the attention of 3d printers everywhere. This simple checklist will help you get your STLs ready for the masses & make 3d printers happier with the 3d designs you produce. Whether you are a beginner 3d designer or a pro 3d modeler, you may well pick up a trick or two from these pro tips!*** The Pre-Press Checklist FREE: https://than.gs/m/925571*** Download MandicReally Models FREE: http://thangs.com/mandicreally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- Timestamps:0:00 - Intro1:00 - Brilliant Sponsor Spot2:09 - Why?2:44 - 1: HQ STLs5:58 - 2: Print Orientation8:18 - 3: Check for Watertight11:44 - 4: STEP Files14:23 - 5: Slice Your Designs16:01 - 6: PRINT YOUR DESIGNS!17:18 - FREE Checklist Download17:34 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
Making Money 3D Printing! w/ 3D Design Tips & the Qidi X-Max 3! MandicReally 2023-08-26 | Want to make money 3d printing? Let's check out a project brought to us by a local home theater company and solve their problem, while making money 3d printing! Generating income & solving real world problems with practical 3d printing. We will deal with the customer, design a part, print that part with the X-Max 3 (thanks to ZBANX & Qidi-Tech for Sponsoring this video) & discuss how to charge for 3D printing & 3 Design Services!Check out the NEW & FAST Qidi 3D Printers to thank them for supporting this content: Qidi X-Max 3: shrsl.com/4hpld ( Currently: $899.00!! )X-Max 3 on Amazon: amzn.to/3Pdm3mA（ Currently: $1,099.00 ）Qidi Filament: shrsl.com/4hpljQidi X-Plus 3: shrsl.com/4hplh-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- TIMESTAMPS: 0:00 - Intro1:00 - The Project1:57 - Setting Expectations2:58 - Designing for IRL Parts4:40 - Test Template Prints5:55 - Other 3D Models7:46 - Completed Design8:39 - Filament Choice9:49 - Qidi X-Max 311:06 - X-Max3 vs Prusa Mk411:58 - Printed Parts Detail14:06 - Assembling the Parts14:40 - MONEY Start15:55 - Print Time & Quality16:44 - What I charge for Print Time!18:09 - Materials Cost19:04 - The Total19:53 - X-Max 3 Thoughts20:19 - X-Max 3 Print Quality21:19 - OutroVideo Sponsored by ZBANX & Qidi-Tech, thank you to them for supporting our content! Links provided are Affiliate Links. These do not cost you anything more, but do provide a small commission to the referrer (MandicReally in this case). Thank you for watching & using those links to help support future content!#3dprinter #3dprinting #makingmoney
Unbox-Athon LIVE! Unboxing 3+ 3D Printers! AnkerMake M5C, Creality K1, Bambu P1P, LDO, Fysetc! MandicReally 2023-08-12 | A half dozen 3d Printers have piled up just WAITING for us to Unbox them. So why don't we do an UNBOX-ATHON! Unboxing all of them in one go! We will unbox, setup, and do a first print with almost all of these machines! Check it out LIVE! Unboxing until I drop!*** Bambu Lab P1P: tinyurl.com/BambuLabP1P*** AnkerMaker M5C: tinyurl.com/AnkerM5C - ANKERMAKEM5C30 - Code to save 30%*** Creality K1: tinyurl.com/CrealityK1*** Fysetc Voron 0.2r1 Kit: tinyurl.com/Fysetc02r1*** LDO Voron 2.4: tinyurl.com/LDO35024*** Lulzbot TAZ 5: lulzbot.comPlease consider supporting on Patreon: patreon.com/mandicreally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3u5mB2Z*** 2nd Camera: amzn.to/3NBHVEt*** Video Recorder Used: amzn.to/30cAvU9 *** Action Camera: amzn.to/2ATHS73 *** 3rd Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.#MandicReally #3DPrinting #3DPrinter
The BIG One - Unboxing Qidi X-Max 3! MandicReally 2023-08-10 | The Qidi X-Max 3 is a brand new BIG Klipper powered 3d Printer. It features direct drive, core-xy motion system, a 325mm cubed build volume, ACTIVE chamber heating, an auxiliary part cooling fan, and more. My new unit just arrived, so let's unbox this new Qidi XMax 3 LIVE!Qidi X-Max 3: shrsl.com/4hpld ( Currently: $899.00!! )X-Max 3 on Amazon: amzn.to/3Pdm3mA（ Currently: $1,099.00 ）Qidi Filament: shrsl.com/4hpljQidi X-Plus 3: shrsl.com/4hplh (affiliate link)Please consider supporting on Patreon: patreon.com/mandicreally-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3u5mB2Z*** 2nd Camera: amzn.to/3NBHVEt*** Video Recorder Used: amzn.to/30cAvU9 *** Action Camera: amzn.to/2ATHS73 *** 3rd Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.#MandicReally #3DPrinting #3DPrinter
LTX 2023 was CHAOS! and I liked it... MandicReally 2023-08-03 | The year is 2023 and LTX is BACK! This year we had the pleasure of attending as a Creator & made the most use of it we could. Check out this video to see some behind the scenes fun at LTX2023, 3D printing, computer hardware, other creators and more!How many Content Creators you know can you spot???Check out these folks:*** Backpack V0: instagram.com/miguelhigginsmoy*** @EposVox *** @razer *** @Level1Techs *** @3DPrintingNerd *** @Prusa3D *** @PantheonDesign *** @Repkord *** @BambuLab *** @Barnacules *** @ASUS *** @TechTechPotato *** @paulshardware *** @CraftComputing *** @ElectroBOOM *** @EKWBofficial *** @LinusTechTips -----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
ONE Cable To Rule! Voron 2.4 CAN Install w/ SB2240 MandicReally 2023-07-29 | To try everything Brilliant has to offer—free—for a full 30 days, visit brilliant.org/MandicReally . The first 200 of you will get 20% off Brilliant’s annual premium subscription.Simplifying my Voron 2.4 by installing a BigTreeTech EBB SB2240 CAN Toolboard to the Stealthburner toolhead. Using just one cable to control the entire toolhead of my Voron 2.4 3d printer! And FINALLY finishing my Voron 2.4 into a complete, enclosed, and high speed 3d printing machine. STLs used: - Y Endstop Relocation PG7 Mount: https://than.gs/m/910854- Hex Cable Door Cover: https://than.gs/m/914383- PG7 Toolhead Mount: printables.com/model/464735-pg7-cnlinko-lp-12-mount-for-sb2209-sb2240- Roller Spool Holder: printables.com/model/222362-voron-0124-roller-spool-holder-for-15152020-profil- Voron Handles: mods.vorondesign.com/detail/xa84lhUN5aMX4nmfZquaQ-----------------------------------------------------------------------------------------------Parts Used (affiliate links):*** BigTreeTech SB2240 / SB2209: shrsl.com/4683c*** Mellow Integrated Shaft Gear: https://s.click.aliexpress.com/e/_DmIferZ*** BigTreeTech U2C: bit.ly/3Kp43Tv*** Polymaker ASA: tinyurl.com/PolymakerASA-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.SPONSOR DISCLOSURE: Thank you to Brilliant.org for sponsoring this video! Check them out at brilliant.org/mandicreally to help support this content further.Timestamps:0:00 - Intro1:30 - Brilliant Ad2:40 - SB22403:06 - Disassembly3:53 - X-Endstop4:05 - Clockwork 25:01 - Klicky Probe5:41 - SB2240 / 2209 Install7:29 - Stealthburner Fans8:37 - Cable Support & Sleeving9:55 - Y Endstop Relocation & Chamber Temps10:30 - CAN wiring12:15 - Klipper Configing13:10 - COMPLETE 2.4!14:44 - Handles15:02 - Spool Holder15:27 - Chamber LEDS16:02 - Back Panel Graphic16:50 - FAILURE!17:55 - SB2209 New Stuff!19:36 - Another Problem...20:40 - Final Thoughts21:42 - Outro
RepRack Filament Storage makes life EASIER! #3dprinting #maker #3dprinter MandicReally 2023-07-24 | ...
Building Filament Storage Solutions - xTool P2 Laser Project / RepRack! MandicReally 2023-07-15 | My studio has a serious organization problem, so I'm ignoring most of it and just addressing the filament piles! Let's get to building filament storage solutions that fit the needs of this 3D printer. Making our own filament storage solutions will be a simple DIY process involving cutting with the xTool P2 CO2 laser, 3d printing, and the RepRack open source filament storage system! Check out RepRack here: printables.com/model/129024-reprack-open-source-spool-holder-and-storage-syste@Repkord Website: repkord.comMy Double Filament Rack Files: https://than.gs/m/905579@xToollaser P2 55W CO2 Laser: xtool.com/?ref=JFwhQgTflhDyF&utm_medium=5306&utm_source=influencer (affiliate link)Polymaker Filament: tinyurl.com/polymakerr (affiliate link)Bambu Lab 3D Printer: tinyurl.com/BambuLabSite (affiliate link)-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- TIMESTAMPS:0:00 - Intro0:45 - The Crime Scene!1:08 - The Project1:43 - xTool P2 Laser4:43 - Materials Required5:55 - FRENCH CLEATS!7:20 - Cleat Mounting8:13 - RepRack Building10:00 - Filament Counting...11:00 - Double RepRack13:20 - Feeder RepRack16:10 - FINISHED Project!17:05 - Final Thoughts18:02 - OutroThe opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
Building my Dream Standing Desk Setup with 3D Printing! MandicReally 2023-07-08 | Using 3D Printing to create my ULTIMATE DREAM AMAZING SPECTACULAR Standing Desk Setup! Seriously though, 3D Printing helped me to create the new desk setup I have really been dreaming about. Whether it be sitting down to edit these YouTube videos, standing up to design my latest 3d printer build, or something in between for a streaming setup, check it out to learn how 3d printed parts made it possible!This video's Sponsor:FlexiSpot E7 standing desk: US - shrsl.com/4mlacCanada - bit.ly/46C1hUEUse my code ''YTB50'' & get $50 off orders over $500!FREE STL for VESA Offset: https://than.gs/m/56737FREE STL for Speaker Stands: https://than.gs/m/914326FREE STL for Desk Foot Levelers: https://than.gs/m/926595Products Featured:*** Straight Router Cutter: amzn.to/3XHLvTU*** Cal-Digit TS3 Plus: amzn.to/3JViSNt*** Beacn Mic: amzn.to/3De280d-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.#desksetup #3dprinting #3dprinted
Dremel 3D Printer Running Klipper Costs WHAT?!? #prototype #3dprinter MandicReally 2023-06-30 | Dremel is releasing a new 3D printer and... it doesn't look bad?! It is running Core-XY, linear rails, auxiliary part cooling, dual direct drive extruders, high flow ceramic hotends, and KLIPPER FIRMWARE! Is this Dremel Digilab 3d printer actually good? It is just a prototype so only time will tell, but at that price, it is gonna be hard to see the value...-----------------------------------------------------------------------------------------------Please consider supporting by checking out my various links:mandicreally.com/links ----------------------------------------------------------------------------------------------- Filmed with:*** Main Camera: amzn.to/3c6ULgV*** Main Lens: amzn.to/3c616cp*** Overhead Camera: amzn.to/2U4b1nZ *** Video Recorder Used: amzn.to/3ymN90U*** Action Camera: amzn.to/2ATHS73 *** Second Camera: amzn.to/371EhBM*** B-Roll Lens: amzn.to/2xmg85L *** Wide Angle Lens: amzn.to/2YiZTmH*** Slider: amzn.to/3nGZ1Uh*** Lav Mic: http://amzn.to/2DFwgR5 *** Shotgun Mic: amzn.to/2IjTJiB*** Mini Tripod: http://amzn.to/2Eok8Fw *** Monopod - http://amzn.to/2C1YEMU *** Tripod: amzn.to/2yASruf *** Gimbal: http://amzn.to/2FNwesV *** Primary Lighting: http://amzn.to/2jHROnW *** Additional Lighting: http://amzn.to/2DImspx *** RGB Lights: amzn.to/2UUGAOk *** Drone: amzn.to/2yDkwkI----------------------------------------------------------------------------------------------- The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
