How to make Lego building instructions | Part 1 (LDCad) Martis Brick Models 2019-08-20 | Download the entire project folder here:drive.google.com/open?id=1X3uyxychmPxDxWk_pU5yTmJKWElEj0dVWelcome to part one in my video series where I guide you through the process of making high quality Lego building instructions. In this episode I give a general introduction and go over the basics of modeling in LDCad.Now I know these are long video's, however if you don't have the patience to watch through these video's to learn, you probably also won't have the patience to actually make instructions. and yes I know it sounds harsh but keep in mind making instructions will easily take more than 8 hours, depending on the size of your model.
Lego UP 4014 Big Boy | Version 2.0 Martis Brick Models 2021-10-08 | Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Letbricks/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boyletbricks.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Letbricks will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.Music used:––––––––––––––––––––––––––––––Artist: tubebackrTrack: EmojiMusic provided by Audio Library PlusWatch: youtu.be/Dsr4o9cZxUoFree Download / Stream: alplus.io/emoji––––––––––––––––––––––––––––––Artist: Joakim KarudTrack: Vibe With MeListen: http://soundcloud.com/joakimkarudMusic promoted by Audio Library youtu.be/-7YDBIGCXsY––––––––––––––––––––––––––––––Artist: PeyruisTrack: VelvetListen: soundcloud.com/peyruis Creative Commons — Attribution 3.0 Unported — CC BY 3.0 Free Download / Stream: bit.ly/peyruis-velvet Music promoted by Audio Library youtu.be/r-rU0pZdtTA ––––––––––––––––––––––––––––––Artist: 20sylTrack: Zed Zee ZetaWatch: youtube.com/watch?v=FFJHD75Kngw#UnionPacific #BigBoy#lego
Lego Big Boy pulling a 6.7 kg train Martis Brick Models 2021-09-26 | Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Letbricks/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boyletbricks.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Letbricks will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.Just a short of my Big Boy pulling along a combination of 6.7 Kg (±15lb)Additionally the locomotive weights 2.3(±5lbs) kg, so the total combined weight is 9 kg (±20lb)#UnionPacific #BigBoy#lego
Lego UP 4014 Big Boy | feature overview Martis Brick Models 2021-09-15 | Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Letbricks/Lesdiy: (Chinese manufacturer) letbricks.com/product/moc-19554-union-pacific-4014-big-boylesdiy.com/products/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Letbricks will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.This is a simple feature overview of my redesigned Lego Union Pacific Big Boy.Originally this video was made as an internal overview for a Chinese manufacturer. However since it does show of the model and some of it's key features, I decided to slightly edit it and upload it for everyone else to see.#UnionPacific #BigBoy#lego
Lego Big Boy running switches Martis Brick Models 2021-08-09 | Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Letbricks/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boyletbricks.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Letbricks will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.#UnionPacific #BigBoy#lego
Deiz3l - Revisited | A rct3 mini project Martis Brick Models 2021-05-29 | Back in the days I made rct3 video's Deiz3l was one of the last roller coasters I published.So recently when I fired rct3 back up, I realized I still have the save file for it.So I went back in, made some changes, and re-recorded the video.This is the result.....#rct3 #rollercoastertycoon #rollercoaster
Lego BR86 Sound | LPE (Lego Pneumatic Engine) Martis Brick Models 2021-05-11 | To see more of this locomotive see my other video's about it:youtu.be/A8jAaGSxOmAyoutu.be/1YIAAsdVRTIThis video is purely to HEAR the locomotive running, nothing more nothing less.#lego#pneumatic#locomotive
4 Cylinder Axial LPE | Lego Pneumatic Engine Martis Brick Models 2021-04-25 | A short clip running my lego 4 cylinder axial pneumatic engine.#lego#pneumatic#engine
Lego Big Boy running on R40 curves Martis Brick Models 2021-04-18 | Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Letbricks/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boyletbricks.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Letbricks will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.#UnionPacific #BigBoy#lego
Lambo CrocRod | Lego 42115 B-Model (alternate Build) Martis Brick Models 2021-01-28 | Instructions available here:rebrickable.com/mocs/MOC-63824/morningstrummer/lambo-crocrod-42115-alternate/#detailsThis model is an alternative build for the lego 42115 Lamborghini Sian. Making the model remotely controllable requires additional parts.For images of this model check out the Rebrickable page.#lego #lamborghini #legomoc
Ford f1 - Lego 10265 C-Model Martis Brick Models 2020-05-11 | Instructions available here:rebrickable.com/mocs/MOC-42167/morningstrummer/ford-f1-10265-c-model/#detailsThis is my second alternate build for the Lego ford mustang set 10265.Really man AVOID THOSE POTHOLES. (and gravel...)#lego #formula1 #ford
5 Cylinder Radial LPE | Lego Pneumatic Engine Martis Brick Models 2020-04-13 | Instructions available here:rebrickable.com/mocs/MOC-39694/morningstrummer/5-cylinder-pneumatic-radial-engine/#detailsRadial engines are primarily used in Aircraft, however some can be found in tanks, cars and generators as well. A key aspect of radial engines is the odd number of cylinders, (5, 7, 9 etc.) this has to do with the firing sequence of the cylinders themselves. Always firing every other cylinder, so for a 5 cylinder engine the sequence is as followed: 1 - 3 - 5 - 2 - 4 - 1 - 3 - etc.Creating this with Lego however proved to be very difficult. As it turns out there is no native pentagon shaped Lego piece (at least that I know of) so some creativity was required on my part. Luckily I used to be a big fan of Lego Bionicle and I found some of those nice Visorak frames in my collection, those turned out to be perfect and thus the design process began.Initially I cheated a little bit, creating 5 identical 1 cylinder engines and sticking them together with a gear in the center. This worked, however I wasn't to happy yet as it wasn't a true radial engine. So I continued and come to a design that did work, well sort off. It runs but not as smooth anymore, this yet again came back to not having proper pentagon shapes in Lego. However, it works, and that was my primary goal. A true and working radial engine.Max rpm: low, dunno never measured :-DMusic by Peyruis: soundcloud.com/peyruis#pneumatic#lego #engine
Bugatti F1 Concept - Lego 42083 B-Model (Alternate Build) Martis Brick Models 2020-02-24 | Instructions available here:rebrickable.com/mocs/MOC-36444/morningstrummer/bugatti-f1-conceptHere is my 42083 B-Model build, A Bugatti F1 Concept.- Independent suspension- 4 speed sequential gearbox- V10 piston engine- Steering- and 4 Wheel DriveMusic:Vibe With Me by Joakim Karud http://soundcloud.com/joakimkarudyoutube.com/watch?v=xFacpSgAeko#bugatti #formula1 #lego
Lego Tatra T813 Trial Truck (Lockable Differentials) Martis Brick Models 2020-02-09 | Instructions available here:rebrickable.com/mocs/MOC-35587/morningstrummer/tatra-t813-trial-truck-lockable-differentialsThis Tatra truck is fully radio control using the Lego pf system, it is driven by 4 XL motors, 2 Servo motors and 1 M Motor. The drive train in this Tatra is also one of a kind, as it is not only a true Tatra 8x8 drive train but it also features lockable differentials on each "axle". The total piece count for this truck is 2847.Music: Vlad Gluschenko - Forestyoutube.com/watch?v=4zyQudLrqzwLicense: CC BY 3.0: creativecommons.org/licenses/by/3.0/deed.en#lego #tatra #legotechnic
How to make Lego building instructions | Part 5 (Acrobat) Martis Brick Models 2019-11-09 | Download the entire project folder here:drive.google.com/open?id=1X3uyxychmPxDxWk_pU5yTmJKWElEj0dVWelcome to part 4 of my tutorial on how to make Lego building instructions. In this episode I'll guide you through the final editing and refining of the instructions .pdf file. this all is done with Adobe Acrobat however any PDF editor that works for you would be ok to use.This is the final video of my main tutorial series, in the future I might dig a little deeper into some subjects, or explain some more advanced techniques you can use.Now I know these are long video's, however if you don't have the patience to watch through these video's to learn, you probably also won't have the patience to actually make instructions. and yes I know it sounds harsh but keep in mind making instructions will easily take more than 8 hours, depending on the size of your model.
How to make Lego building instructions | Part 4 (LPub3D) Martis Brick Models 2019-09-29 | Download the entire project folder here:drive.google.com/open?id=1X3uyxychmPxDxWk_pU5yTmJKWElEj0dVWelcome to part 4 of my tutorial on how to make Lego building instructions. In this episode I am going to explain how to set up LPub3D and how to work with LPub3D to create the .pdf instructions.Now I know these are long video's, however if you don't have the patience to watch through these video's to learn, you probably also won't have the patience to actually make instructions. and yes I know it sounds harsh but keep in mind making instructions will easily take more than 8 hours, depending on the size of your model.
How to make Lego building instructions | Part 3 (LDcad/Studio) Martis Brick Models 2019-09-03 | Download the entire project folder here:drive.google.com/open?id=1X3uyxychmPxDxWk_pU5yTmJKWElEj0dVWelcome to part three of my tutorial on how to make Lego building instructions. In this episode I go over checking the parts list adding "step rotations" and prepare the model for rendering of a cover image.Initially I did plan to include some LPub3d, however I would have to split up the LPub3d part if I where to do that which seemed to me as a bad idea.Now I know these are long video's, however if you don't have the patience to watch through these video's to learn, you probably also won't have the patience to actually make instructions. and yes I know it sounds harsh but keep in mind making instructions will easily take more than 8 hours, depending on the size of your model.
How to make Lego building instructions | Part 2 (LDCad) Martis Brick Models 2019-08-25 | Download the entire project folder here:drive.google.com/open?id=1X3uyxychmPxDxWk_pU5yTmJKWElEj0dVThis episode contains time lapses, the actual informative portions don't take up 2 hours.Welcome to part two in my video series where I guide you through the process of making high quality Lego building instructions. In this episode I take a deeper dive into the functionality's of LDCad.Skip the time lapses:1st: 14:332nd 19:193rd 30:524th 49:405th 01:16:336th 01:26:097th 01:46:49Now I know these are long video's, however if you don't have the patience to watch through these video's to learn, you probably also won't have the patience to actually make instructions. and yes I know it sounds harsh but keep in mind making instructions will easily take more than 8 hours, depending on the size of your model.
Lego BR 86 - V.2 Pneumatic Locomotive Martis Brick Models 2019-06-09 | Instructions available here:drive.google.com/file/d/11JPFK6MywacorfuKP5kOZAV7PflXIwUP/view?usp=sharingMay I welcome you to my 2nd version of my pneumatic locomotive. Still under the same BR86 locomotive.This is the smoothest version I was able to come up with, sadly in order to achieve this I had to mount all pneumatic cylinders inside frame rather then on the side of the locomotive. Nevertheless it is still a great achievement.Song used:City Life by Artificial.Music soundcloud.com/artificial-musicCreative Commons — Attribution 3.0 Unported — CC BY 3.0 Free Download: http://bit.ly/CityLife-ArtificialMusic#pneumatic #locomotive #legotrain
Lego passively tilting train mechanism (+download) Martis Brick Models 2019-04-16 | Instructions available here:rebrickable.com/mocs/MOC-24125/morningstrummer/tilting-train-mechanismHere's my design for a tilting train. It's fully passive and includes the ability to overcome the tilting mechanism, when running through switches or s-bends.The train is here only for demonstration purpose, not to be a showpiece. (for that check my Big Boy)So what does this design offer?-Easy to implement-No compromise on looks-Works with all Lego train motors (except 4,5v)-Overcomes tilt in s-bends-Low part use-Free to implement into your own design
Lego Big Boy, Union Pacific, 4014 Update | Version 1 Martis Brick Models 2019-03-27 | Version 2 Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Lightake/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boylightake.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Lightake will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.Version 1 Instructions available here:rebrickable.com/mocs/MOC-19554/morningstrummer/union-pacific-big-boyThis is a slight update to my Union Pacific Big Boy, which is mostly external detailing. Including the most obvious update, full on decal'd out to more resemble the original train, and a slightly updated color scheme to what I suspect is the updated color scheme of the UP 4014 restoration. (turns out I am only a bit of on the front wheels)Powering this behemoth of a train are 2 power function large motor's hooked up to a V2 receiver and a rechargeable lego battery box. I couldn't get 300psi of steam to work in this train sadly, something with heat and melting plastics, dunno I'm not a rocket scientist.Specifications:Pieces: 2956Length: 112 StudsWidth:13 StudsHight:17 StudsWeight: 2,3KgMusic by hidden citizens:http://www.hiddencitizens.com#lego #unionpacific #bigboy
Lego BR 86 - Pneumatic Locomotive Martis Brick Models 2019-01-20 | Check out V.2 here, It runs a lot smoother and sounds a lot better:youtube.com/watch?v=1YIAAsdVRTI&lc=Ugx-mxwULAFRA8RnURJ4AaABAgInstructions available here: (only version 1/this version)rebrickable.com/mocs/MOC-21381/morningstrummer/br-86-pneumatic-locomotiveWe have seen pneumatic engines build out of lego, we have seen locomotives build out of lego, and now.....We have pneumatic locomotives, welcome to a new era of lego trains. One that is closer to the real deal, one that works on compressed gasses.Song used:"New Beginning" by "Del":youtube.com/watch?v=w2oYOGm3J3A#pneumatic #locomotive #legotrain
Lego Big boy, Test run Martis Brick Models 2018-11-25 | Instructions available here:rebrickable.com/mocs/MOC-19554/morningstrummer/union-pacific-big-boyHere's one of the early test runs of my union pacific big boy.
Lego Big Boy, Union Pacific | Version 1 Martis Brick Models 2018-11-18 | Version 2 Instructions available here:rebrickable.com/mocs/MOC-89126/morningstrummer/4014-big-boy-version-20/#detailsOr purchase this model as a kit from Lightake/Lesdiy: (Chinese manufacturer) lesdiy.com/products/moc-19554-union-pacific-4014-big-boylightake.com/product/moc-19554-union-pacific-4014-big-boyEach sale through Lesdiy and Lightake will directly support me, so no need to purchase instructions separately.Sales by any other manufacturer are NOT approved, and will NOT support me and my work.Version 1 Instructions available here:rebrickable.com/mocs/MOC-19554/morningstrummer/union-pacific-big-boyAre you a huge fan of trains, well do I have a huge train for you. The Union Pacific Big Boy.This train is carefully crafted over the span of 6,5 years in order to get the best representation of the big boy as possible. Designed from the ground up with drive-ability in mind. Powering this bad boy are 2 large power function motor's that are fully integrated into the technic frame.Specifications:Pieces: 2863Length: 111,5 Studs (89,2cm)Width:12,6 Studs (10,1cm)Hight:17,5 Studs (14cm)Weight: 2,37Kg (Locomotive 1,46Kg, Tender 0,91Kg)#lego #unionpacific #bigboy
42043 C-Model Tatra T158-6P differential mechanism Martis Brick Models 2018-09-15 | Instructions available here:rebrickable.com/mocs/MOC-17524/morningstrummer/42043-c-model-tatra-t158-6p42043 C-Model Tatra T158-6P differential mechanism
LPE W16 Bugatti, Lego Pneumatic Engine Martis Brick Models 2018-08-20 | Instructions available here:rebrickable.com/mocs/MOC-17025/morningstrummer/bugatti-w16-pneumatic-engineCheck out my Facebook for more photo's and video's (without music)www.facebook.com/MorningStrummerMocsTechnical details:-Little shy of 1200 parts-Max rpm measured, currently 540 (read "final testing")-Length: 26 studs (21cm, 8,25 inch)-Width: 20 studs (16cm, 6,3 inch)-Hight: 17 studs (14cm, 5,5 inch)-Weight: 870 gram (1lb 14oz)Story Time:The inspiration:After the release of the LEGO Bugatti Chiron, I felt kinda disappointed for the lack of a proper W16 engine. Witch in turn gave me the inspiration to design a new pneumatic engine. And knowing the additional design technicality's I felt challenged to actually make it work.The beginning process:Having challenged myself into, taking a complicated engine and making it work with the limited amount of options LEGO has to offer, I decided to tell some people about my insane idea. Since some people didn't believe I was able to do so, I had to off course prove them wrong. and here's where the prototyping starts. The design process:Looking back at it now it was a lot easier than I initially expected. after less than a handful of prototypes and about 1,5 hours of work, I managed to come up with a design that is fairly similar to what you see now, however far from finished. The design pretty much went in 2 parts, first I started with the frame for the pistons. When that was done I debated on how to drive the switches, Initially I wanted to use a sliding design But due to size constraints I was forced to use a camshaft design.The build process:After ordering all the parts I got to work on the final design. (believe it or not I didn't have a full design before ordering parts) So I used the basis of the prototypes, improved upon them, and finally find out a way to merge the switches with the cilinders without it looking like it was just "stuck on top of there". But oh boy then came the biggest challenge.... the pneumatic hose. man that was a real mental challenge, Just try it for yourself: 16 cilinders under 4 different angles on the crankshaft, 2 rows of 4 switches, a really small space to work within, and to top it all of If you make a mistake you'll have to take half the engine apart in order to fix it.Timing the engine:Now if you think watching the finals of the super bowl is stressful you should imagine this: I finally finished the engine to the point of timing the switches, and with the first test the engine ran in 2 different directions.(you can actually see this test go wrong in the video) After some investigation I luckily figured out I didn't wire the pneumatic hose improperly, instead It was just a matter of having 2 switches switch on the wrong moment. so little tweaking of the camshaft did the trick.Final testing:Then off course there is the final test and the o so happy face I made when the engine first ran. Man what a relief, and with a bit of optimizing I managed to get a top rpm of 540 for now. (When creating the instructions I realized I made a mistake fatal for getting high rpm. I DIDN'T drill out the first pneumatic inlet, so i was still restricted to the tiny hole lego puts in their parts rather then the physical limit of the engine.The building instructions:Honestly the building instructions where an afterthought. When I started I had only the intention to create an amazing piece of engineering, and filming it for everyone to see online.So how come these instructions? Well I have tried before to create instructions without any succes, so I thought lets come back to that but this time learn the software and make a successful instruction for everyone to use.But what about the price? Lets be honest, designing a machine like this is no easy task. And on top of that I don't want everyone to just try to build this only to figure out they don't have the technical knowhow to get this engine to work. In other terms: I want to demote the people that are not determined.#bugatti #pneumatic #engine
Oat Almond Bread Martis Brick Models 2017-08-22 | A look inside the bakery, where this time we show the process on how we make our Oat Almond bread.The recipe sadly is a company secret, so I'm unable to share it.
Turned baguettes Martis Brick Models 2017-07-04 | A look inside the bakery, where his time we explore the process of our turned baguettes.
A glimpse inside the bakery Martis Brick Models 2017-05-27 | Me taking 94 breads out of their baking tin's. Total time it took was 2 minutes 10 seconds.
RCT3 - Trinduction Martis Brick Models 2011-12-21 | Be aware that this coaster isn't about realism. it was just something I had made and filmed quite a while ago.
CTR Creator - 16,000 is not a valid floating point value. Martis Brick Models 2011-07-19 | this is just quickly done with no preparation of any kind. Be aware that I use windows xp as operating system and not vista or 7. if you have windows vista or 7 you will have to find the "local" configurations yourself because I have no idea where it then is. the error I got in the end is not something to worry about. if you click save ride and then cancel it will still save the ride but then as "MeinEigenerCTR" so it just asked me if I wanted to overwrite that file. I hope this helped you a little bit and have fun creating your ctr's I am still a little in the rct3 game and if you have some more questions you're free to ask.
Deiz3l - a rct3 mini project. Martis Brick Models 2010-08-12 | Welcome back after more than a jear since I've released my previous rct3 coaster I am back with a mini project. I really loved building this coaster on this way, so you may expect some more mini projescts from me in the near future. then I will also use hardly used coasters to show people what you can do with it. my next coaster will be multidimentional or coasterball.
Revo (a nolimits coaster) Martis Brick Models 2010-05-17 | After exactly one year i am the proud owner of my next nolimits coaster. "Revo" I have been gone with making coasters for almost a year, and I haven't uploaded a nolimits coaster in exactly a year. so i am back and better then ever (in my opinion off course). so I made this coaster because I am possible of playing coaster games again. and it came just on time to be back within a year. so actually I had a brake for the past year. I still am not able to play rct3, but once I have upgraded this pc I will also come back with that. (better than before) more information found here: http://rctlounge.com/forums/showthread.php?t=5463 you can download this coaster here: http://rapidshare.com/files/387702804/Revo3.nlpack http://rctlounge.com/forums/attachment.php?attachmentid=513&d=1274120406 http://www.vodhin.org/e107/download.php?view.1404 and for all the AWFUL PEOPLE who do NOT read the credits here is the songs name: gladiator feet izzy - now we are free and don't even think of asking about it.
cool little bug in nolimits Martis Brick Models 2010-05-01 | this happened when I opened a new track I've created (to test), and thought lets film it xD
some things about the CTR creator Martis Brick Models 2010-03-31 | yeah i will now show you how to set up yout ctr creator and tell some other things about it. i also say that i won't be able to make a tutorial on how to import a ctr car, this is because my computer stops with responding when i am in the rct3 importer. here is a pdf file with tutorial if you really want to know how to import a ctr car: http://rct-3.org/downloads/index.php?page=ItemFile&fileID=304 i hope that i can buy a new computer this year so i can play rct3 and nolimits again and create een more tutorials.
CTR tutorial part 2 V0.85 Martis Brick Models 2010-01-22 | special car type THE CAR NAME IS DIFFERENT AS I HAVE EXPLAINED. SpecialCarTypeANameGigaCableCar SpecialCarTypeAOffsetWait-8.95 SpecialCarTypeAOffsetHitch1.000 here is another ctr tutorial, now about the new option of ctr creator 0.85 (i always use it to create my coasters.) if you cant follow it play back the video and listen to it again. or if i am going to fast for you to keep up pause the video.
CTR tutorial part 1 V0.85 Martis Brick Models 2010-01-22 | Part 2: http://www.youtube.com/watch?v=nXB9_ANQQiE here is another ctr tutorial, now about the new option of ctr creator 0.85 (i always use it to create my coasters.) if you cant follow it play back the video and listen to it again. or if i am going to fast for you to keep up pause the video.
Music Video 2009 Martis Brick Models 2010-01-04 | i think something went wrong, because the sound and video's where perfectly synchronized in sony vegas and now there is a delay of like 10 fucking seconds. but oh well here it is my music video of 2009. with hours of and even more hours on rendering and uploading it is finally here. why is it called 2009 and not 2010, well the coasters are only from 2009, the video was supposed to come in 2009, and most of the work is done in 2009. will there come something like this of 2010 to? maybe it depends on it if i will forget it, and how the situation is. okay i asked you guys for a song, and there where good ones between them, but then it happened i heard such an awesome drum and base song on the radio and fell in love with it, it is the song "End Credits" from "Chase and Status Feat Plan B"
rct3 music video entry closed Martis Brick Models 2009-11-29 | closed ok to enter a coaster just add it as a video response or sent me a pm in case it is in a contest the coaster has to be uploaded in 2009 and you cant enter more then 3 coaster's. also i can't guarantee that all video's will be used but again i will give it my best shot. if you have a idea for the song i would also like to hear it, so i can pick the best out of them. this song is licensed by Sony Music Entertainment
Fun In Google sketchup pro 7 Martis Brick Models 2009-10-03 | well i was messing around in google sketchup and i did something "weird" because normally sketchup doesn't have animation's. i know it is a bit laggy but that is because of my pc, it can't even handle rct3, and it makes rct1 lag (not rct2) 0.o
ctr request Open Again Martis Brick Models 2009-09-27 | I've uploaded this a way back ago so i hope it works like this to share. still don't know how to use the ctr creator? well i have the solution. i have opened a ctr request shop at rctlounge. i can create almost everything, i have some information over there and i hope you will read it before you make your request. here is the link: http://www.rctlounge.com/forums/showthread.php?p=87135#post87135 ow and please only make your request on the lounge and not on youtube. My website where all the ctr's i create eventually end up: http://www.ctr-rides.tk NOTE: the animated ctr icon was created by "Markus Lomberg", he get the credits for it. the rest was done by me
ctr tutorial over creator 0,75 part 2 Martis Brick Models 2009-09-03 | -----READ THIS----- this is part one of the 2 part tutorial and it explains how to add your own HIGH QUALITY icon to your ctr. it is important that you have ctr creator 0,75 OR HIGHER do NOT use an creator below that. here is the download of the rct3 importer: http://sourceforge.net/projects/rct3/files/RCT3%20Importer/RCT3%20Importer%20v18beta2/rct3importer-v18b2-svn130-dist.zip/download and here you have the download of ctr creator 0,75: http://rct-3.org/content/de/rct-rct3-ctr-programme_tools/downloads-1731.html or if you would try the new creator 0,85 you can find it here: http://rct-3.org/content/de/rct-rct3-ctr-programme_tools/downloads-1774.html remember your image need to be square and have the power of 2, to start with. 64X64 (also the end result) 128X128 256X256 512X512 (this is what i am using) 1024X1024 (i wouldn't recommend using this size because then the image could have to much pixels) i am trying to find out how the new option of ctr creator 0.85 works and then i can make a tutorial of it to. songs: part 1: pendulum hold your collor part 2: 1st dj tiësto elements of life 2nd intel d lets go come on (this song is owned by "Ultra Records")
ctr tutorial over creator 0,75 part 1 Martis Brick Models 2009-09-03 | -----READ THIS----- this is part one of the 2 part tutorial and it explains how to add your own HIGH QUALITY icon to your ctr. it is important that you have ctr creator 0,75 OR HIGHER do NOT use an creator below that. here is the download of the rct3 importer: http://sourceforge.net/projects/rct3/files/RCT3%20Importer/RCT3%20Importer%20v18beta2/rct3importer-v18b2-svn130-dist.zip/download and here you have the download of ctr creator 0,75: http://rct-3.org/downloads/index.php?page=Item&itemID=336 or if you would try the new creator 0,85 you can find it here: http://rct-3.org/downloads/index.php?page=Item&itemID=30 remember your image need to be square and have the power of 2, to start with. 64X64 (also the end result) 128X128 256X256 512X512 (this is what i am using) 1024X1024 (i wouldn't recommend using this size because then the image could have to much pixels) i am trying to find out how the new option of ctr creator 0.85 works and then i can make a tutorial of it to.
woppa - rct3 Martis Brick Models 2009-08-09 | -----alien studio----- -----mattygroenhopper----- this coaster stands in a park I didn't feel to film anymore. I had filmed 2 POV's and that is what i am going to show to you. I hope you engoye it.
blackle - rct3 Martis Brick Models 2009-08-09 | -----alien studio----- -----mattygroenhopper----- this coaster stands in a park i didn't feel to film anymore. I had filmed 2 POV's and that is what i am going to show to you. I hope you engoye it.
Rct3 - XYN - original created by m00nkinftw Martis Brick Models 2009-05-22 | it is finally here XYN, this is a recreation of the original xyn from m00nkinftw. I decided to recreate this ride after seeing his last video, i asked permission and he gave me the green light. i started working on it and now it is here on youtube "again" so you can engoye of a recreation of his last coaster. you may know why m00nkinftw didn't uploaded this coaster wel here it is again. he started working on it and when the trailer came out I saw in his last clip where to find more information about the coaster, i decided to go and look over there. and yes it whas there but after one or two weeks hee made a reply that he was having problems with his rct3, he couldn't open xyn and also not a sandbox. he tried to fix it by removing his last installed scenery, but stil it didn't load. he told that he would try to fix the problem and still upload xyn, but when he fixed his pc he didn't reinstall the game ;-( he didn't have any motivation to reinstall the game again. and if he did he would, it wouldn't mind becous he lost the park file. ;-( ;-( and that was about it. as sayed before I was HAVING THE PERMISSION TO RECREATE THIS RIDE. and now you can still be inspired by m00nkinftw's last ride. every UNWANTED comments wil be REMOVED.
inhaler nolimits Martis Brick Models 2009-05-17 | hello and welcom to my seccond nolimits coaster. this is not my seccond coaster i created (ofcourse) but have fun. this was the first time using sony vegas pro 9.0 so the video dousnt stand as it has to do. sorry tags: inhaler no limits nolimits 1.2 1.5 1.6 1.7 mattygroenhopper alien studio studio's studios
RCT3 - XYN - Mauhrer Sohne compact launcher (Trailer) Martis Brick Models 2009-05-16 | Before making any unwanted comments read this. this coaster is dedicated and origanally created by m00nkinftw. what i am going to show you is a recreation. hello guys, i have come to the idea of recreating xyn. for all of you. before i started to build this coaster, i asked promission to m00nkinftw, and he gave me the green light to build it. for what i know are the supports the only things that are in the wrong place further it fits. this coaster will be at night becous it was ment to be that way. i have seen his threat on rctlounge.com and it looked like it would be his seccond night coaster. this coaster was first called as xin but he wanted to do something whith das matze rock the net, and then xyn fitted the most. here i have a Mauhrer Söhne compact laucher of m00nkinftw. it would be really nice for other rct3 designers to share this video. original trailer: http://www.youtube.com/watch?v=RIzLbqNleIk&feature=related
inhaler trailer Martis Brick Models 2009-05-12 | this is the trailer for my next nolimits coaster i made today. the coaster is completely finiched, i only need to film it.
