Name: xTool Studio - How to Use Tabs in xTool Studio to STOP Laser Cuts From Falling and Over Burns @SarahNenniDaher
Uploaded: 2026-09-23T08:17:00-05:00
Duration: 8 min 17 s
Description: xTool Studio - How to Use Tabs in xTool Studio to STOP Laser Cuts From Falling and Over Burns

xTool Studio - How to Use Tabs in xTool Studio to STOP Laser Cuts From Falling and Over Burns

Sarah Nenni-Daher 2026-09-23 | xTool Studio - How to Use Tabs in xTool Studio to STOP Laser Cuts From Falling and Over Burns

Laser Cut Sun Catcher / CO2 or Diode Project Idea / Flex Suncatcher / XCS 2.0 Laser Design

Sarah Nenni-Daher 2024-06-14 | * INFO HERE * Learn how to design, cut, and prepare a gorgeous laser cut sun catcher. You will need:
- 3mm basswood plywood (or other material like acrylic)
- Stained Glass Flex (link and instructions below)
- 3M 467MP
- Paper Masking and Scraper
- Spray Sealant (optional)
- CO2 or Diode Laser (Settings Provided for xTool P2 and xTool S1 40w)

Equipment Used In This Video
- xTool P2
- xTool P2 Honeycomb
- 6" Inline Fan

xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
Inline Fan: xtool.com/products/xtool-inline-duct-fan?_pos=1&_sid=325479683&_ss=r&ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction and Slow Down Tutorial
0:34 - Design a Sun Catcher
6:13 - Input Settings and Laser Cut
9:05 - Assembly

How to Order the Flex I Used:
Go to SmokeyHillDesigns.com
Search "Acrylic Transparent Pastel Stained Glass"
At right, select "0.01" Clear Flex"

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolp2 #xtools1 #xtoolsoftware
As an Amazon Associate, I could earn from qualifying purchases.

Easy Scrunchy Hat Gnome / Free Gnome Pattern / Scrunched Hat No Wire / Cute Gnome DIY

Sarah Nenni-Daher 2024-06-12 | * INFO HERE * This adorable gnome requires no pattern at all to create with hot glue or a sewing machine. Here are a few measurements for the body and remember: the hat should be as wide as the body + 1/2 an inch and at least as high as the body is tall.
6 high by 12.5 wide (chunky)
8 high by 10 wide (short)
13 high by 10 wide (tall)

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:31 - Sizes and Body
6:22 - Sew and No Sew
7:04 - Scrunched Gnome Hat

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

DIY Layered Laser Cut Sign / xTool S1 / MDF Sign / XCS 2.0 Tutorial

Sarah Nenni-Daher 2024-05-30 | * INFO HERE * Learn how to create a layered sign using these tips for XCS 2.0.

Design File Here: shop.rufflesandrainboots.com/product/hello-summer-door-sign-svg-laser

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Dollar Tree 4th of July Craft Idea / Americana Crafts / 4th of July Gnome / Easy Crafts for July 4th

Sarah Nenni-Daher 2024-05-29 | * INFO HERE * All of these Americana crafts for July 4th are full of red, white, and blue and rustic goodness. You will need a few Dollar Tree craft supplies, fabric, stain, and basic craft supplies.

Red Fabric: amzn.to/3x3S4qZ
Blue Fabric: amzn.to/3R3cMhJ

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:25 - 4th of July Sign
6:54 - Covered Houses
8:13 - Home Sign
13:12 - 4th of July Gnomes

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Acrylic Phone Stand Free File / xTool P2 Tutorial /How to Paint Acrylic Engraving / Fathers Day DIY

Sarah Nenni-Daher 2024-05-24 | * INFO HERE * I'm sharing a lot of fun and free stuff in this easy XCS 2.0 tutorial showing you how to create a phone stand using my free phone stand laser SVG. Three sizes of materials are included in the file so you don't have to worry about doing the adjustments: 3mm, 5mm, and 6mm.

Free XCS Design File: drive.google.com/file/d/1pdgRwm2OtWUDQLJocvCMbJ8doQsfNAO2/view?usp=sharing
xTool 5mm Acrylic: xtool.com/products/1-5-glossy-acrylic-sheet?_pos=3&_sid=86ca07a42&_ss=r&ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer&variant=43574982082799

Helpful Links and My Set Up:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
Inline Fan: xtool.com/products/xtool-inline-duct-fan?_pos=1&_sid=325479683&_ss=r&ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software Beta 2.0 (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Playlist for Father's Day Freebies: youtube.com/playlist?list=PLexquiniA5SEZ1q13fmk82rTwG1bHA2-k&si=lUdkUqhSZtm6t9O3

First Day at Home's Notebook: youtu.be/wIrvBZuxgdk
Sustain My Craft Habit's Game: youtube.com/watch?v=hrnXcBQvrpI

Get the Written and Printable Tutorial: rufflesandrainboots.com/acrylic-phone-stand-for-dad-laser-cut-and-engraved

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction, Laser Group, Settings
0:51 - Set Up the File
2:28 - 5mm Acrylic Settings (40,300,1,200 and 90,3,1)
5:09 - Masking, Laser Engraving, and Cutting
5:53 - Cleaning and Painting

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolp2 #xtool #xtoolsoftware
As an Amazon Associate, I could earn from qualifying purchases.

Gnome Pattern / Reversible Gnome Pattern / DIY Gnome / Cute Gnome

Sarah Nenni-Daher 2024-05-22 | This adorable gnome pattern can be sewn or hot glued which makes it very versatile. Today, I’m sharing a reversible hat sewing alternative for a reversible, interchangeable hat that will help you or your customer get different looks.

Pattern: shop.rufflesandrainboots.com/product/gnome-scandinavian-sweeties
Playlist: youtube.com/playlist?list=PLelQvRmnsDrfxLHF93ExZ7Fh0XoomyCdn

Tip for Finding a Sewing Machine: Instead of thrift stores, try sewing machine repair shops. They will refurbish amazing machines and sell them for a fraction of the price to turn the inventory.

What’s In This Tutorial
0:00 - Introduction
0:30 - Cut Gnome Pattern Pieces
2:19 - Sew Body and Hat
12:25 - Assemble and Decorate

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher,
Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Dollar Tree Gnomes / Flower Pot Gnomes / Painted Gnomes / Garden Gnome DIY / Free Gnome Tutorial

Sarah Nenni-Daher 2024-05-15 | * INFO HERE * These are the cutest little garden flower pot gnomes created using Dollar Tree clay pots and a bit of paint. Learn how to quickly make these adorable DIY gnomes. This is a perfect summer craft for kids.

Get the Full Tutorial: rufflesandrainboots.com/the-cutest-flower-pot-gnomes-craft

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:43 - Paint
2:20 - Gnome Beard
3:32 - Assemble
3:58 - Gnome Nose

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Make. Graduation gift jar with $$$ #dollartreediy #graduation #gradgift

Sarah Nenni-Daher 2024-05-14 | ...

XCS Tutorial / XCS 2.0 / How to Create Monograms / xTool Creative Space Design Tips

Sarah Nenni-Daher 2024-05-09 | * INFO HERE * Free Facebook Group! Learn how to create 9 monograms using the free design tool, XCS 2.0 or xTool Creative Space. Use these monograms in your laser engraving or laser cutting business to customize products, keepsakes, and more.

Fonts Used:
Monogram Font creativefabrica.com/product/monogram-font-alphabets-letters-svg/ref/92473
VICTORIA Font fontbundles.net/newflix-bro/59362-victoria-glamour-elegant-headline-typeface?ref=lQohBO
The Breaks Font Family fontbundles.net/plusstore/1327089-the-breaks-smooth-version?pref=lQohBO&ref=lQohBO
Amastery Script fontbundles.net/blackcatsmedia/24277-amastery-font-duo-extras?ref=lQohBO
Breakfast Pastry Font Family creativefabrica.com/product/breakfast-pastry/ref/92473
Uncle Grump Font Family creativefabrica.com/product/uncle-grump/ref/92473
Cooper Black (I have through Adobe Fonts); This is similar: creativefabrica.com/product/chinook/ref/92473

Machines I Have:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Facebook Group: facebook.com/groups/lasercraftersbeginners

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
- Monogram Font
- Laurel and Initial
- Cut Letter Uneven
- The Family
- Stylized Letter
- Interest Letter
- Fun Font Build
- Split Letter Divide
- Rounded Tag

Let's Connect:
Follow on Facebook: facebook.com/rufflesandrainboots
Pinterest: pinterest.com/momtoelise/_created

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtool #xtoolcreativespace #laserengraving #laserengraving
As an Amazon Associate, I could earn from qualifying purchases.

Gnome Wall Hanging / Embroidery Hoop Gnome / DIY Gnomes / Gnome Crafts to Make and Sell

Sarah Nenni-Daher 2024-05-08 | * INFO HERE * This adorable DIY gnome wall hanging is a 15 minute project that uses a thrift store sweater and an embroidery hoop. Create a cute little gnome with faux fur, fabric, and something for a nose. You'll need a hot glue gun, scissors, and a craft knife - just basic craft supplies!

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

xTool Creative Space Tutorial / XCS 2.0 / How to Vectorize an Image for Engraving / xTool Software

Sarah Nenni-Daher 2024-05-04 | * INFO HERE * Free Facebook Group! This work-along tutorial is a great way to see what xTool Creative Space (XCS 2.0) can do. Learn how to get a raster image ready for engraving by turning it into a vector image using only XCS 2.0. Learn how to use the node management, image features, and more.

Facebook Group: facebook.com/groups/lasercraftersbeginners

My Machines and Free Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Some Socials:
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolcreativespace #xtool #xtoolp2 #xtools1 #xtoolm1
As an Amazon Associate, I could earn from qualifying purchases.

Get the wild gnome pattern to create this and other gnomes. Full video tutorial linked.

Sarah Nenni-Daher 2024-05-03 | ...

Laser Cut Cake Toppers / How to Design Cake Toppers / Best Tricks for Laser Cake Topper DIY

Sarah Nenni-Daher 2024-05-02 | * INFO HERE * Get the tips and tricks on creating cake toppers with lasers. Acrylic cake toppers are a laser craft to make and sell for any creator because they can be generic or customized. Learn how to create an acrylic cake topper with an SVG or by learning how to design a laser cut cake topper.

Get the Full Tutorial: rufflesandrainboots.com/make-laser-cut-acrylic-cake-toppers

My Lasers and Free Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:18 - Join Facebook Group
0:22 - How to Use an SVG
5:24 - How to Create a Cake Topper

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#lasercutting #xtoolp2 #xcs #caketoppers
As an Amazon Associate, I could earn from qualifying purchases.

Pompom Snowman / Easy Snowman Craft / Faux Fur Snowman / Standing Snowman Gnome DIY / Pom Pom Craft

Sarah Nenni-Daher 2024-05-01 | * INFO HERE * It's time to use up some of the holiday accessories in your stash. Christmas and winter crafting can be so busy and this adorable little faux fur standing snowman is a quick way to use faux fur and plastic craft store bags.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #snowman
As an Amazon Associate, I could earn from qualifying purchases.

How to Engrave Slate / xTool S1 Batch / Bright Slate Engraving with Vectors Without Poly / Coasters

Sarah Nenni-Daher 2024-04-25 | * INFO HERE * You can get a bright engraving on slate using a laser by dialing in those settings. Today, I'm using the xTool S1 to create a set of slate coasters and the Pin-Point Positioning™ algorithm as shown in this XCS 2.0 tutorial.

Get the Full Tutorial: rufflesandrainboots.com/laser-engrave-slate-vector

My Lasers and Free Laser Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:20 - File Set Up and Materials Test
2:01 - Engraving Set Up
5:24 - Watch the Laser Work
6:40 - Productivity Tips

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#laserengraving #diodelaser #xtools1
As an Amazon Associate, I could earn from qualifying purchases.

Hook Hat Gnome Pattern / Free Gnome Pattern for Newsletter Subscribers / DIY Gnomes

Sarah Nenni-Daher 2024-04-24 | * INFO HERE * Get this hook hat gnome pattern free if you're signed up for the free Ruffles and Rain Boots newsletter (sent weekly).

Not Signed Up Yet? Sign Up Here: rufflesandrainboots.com/go/email-signup
Get the Pattern: rufflesandrainboots.com/free-hook-hat-gnome-pattern

If you're already a newsletter subscriber, go to the Subscriber Library on the website, type in the password (at the bottom of every email I send), and download.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:36 - Gnome Hat
3:23 - Gnome Body
8:18 - Beard and Nose

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Mirror Acrylic Magnet / Mothers Day Laser Craft / XCS 2.0 Tutorial / xTool P2 Acrylic Project

Sarah Nenni-Daher 2024-04-18 | * INFO HERE * Learn how to use mirror acrylic in the xTool P2 and design in the all new XCS 2.0 tutorial to create your own Mother's Day magnet. We'll be learning and using the edit node function within XCS to manipulate vectors.

3M Tape: amzn.to/3VZVYLB
Rare Earth Magnets: amzn.to/3Q92R9L
Paper Masking: amzn.to/3UlhGIH
Acrylic Used: houstonacrylic.com/products/pale-gold-mirror-acrylic

Download the XCS File: drive.google.com/drive/folders/1YULuTHcix8Va0tTS2XJy0MCpV0WysGL2?usp=sharing

Get the Full Tutorial: rufflesandrainboots.com/mirror-acrylic-magnet-mothers-day

My Lasers and Free Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:12 - How to Design in XCS 2.0 Tutorial
7:25 - Prepare Mirrored Acrylic
10:06 - Finish and Assemble

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolp2 #xtool #xcs #xcs2.0 #mothersdaygift #laserengraving
As an Amazon Associate, I could earn from qualifying purchases.

Wood Gnome / Shelf Sitter Gnome with Long Legs / Gnome with Dangling Legs / DIY Gnome with Wood

Sarah Nenni-Daher 2024-04-17 | * INFO HERE * Create an adorable wooden gnome with long, dangling legs in less than 25 minutes using this free gnome tutorial. Supplies are below.

Wood Triangle: http://shrsl.com/4hs2j
Faux Fur: amzn.to/3xBXtWi
Macrame Cord: amzn.to/3UjIWav

Get the Full Tutorial: rufflesandrainboots.com/shelf-sitter-gnome-dangling-legs

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:25 - Supplies and Materials
1:11 - Stain Gnome Body and Feet
5:03 - Drill Holes and Thread Cord
9:25 - Gnome Beard and Finishes

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome #woodcraft
As an Amazon Associate, I could earn from qualifying purchases.

Laser DIY / XCS 2.0 Tutorial / Layered Letters / xTool S1 Project / Laser Cut / Painted Laser DIY

Sarah Nenni-Daher 2024-04-11 | * INFO HERE * Learn how to design your own layered letter using the XCS 2.0 Beta version of xTool Creative Space. Watch this laser cut layered letter come together with a little paint and glue.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:15 - Insert and Adjust File for Cutting
4:43 - Paint and Seal
5:11 - How to Glue Layers
5:37 - How to Use XCS 2.0 Tutorial to Create This

My Lasers and Free Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtool #xtools1 #xcs #lasercutting #laserengraving
As an Amazon Associate, I could earn from qualifying purchases.

Pineapple Gnome / Fun Summer Gnome DIY / No Sew Gnome / Chunky DIY Gnome

Sarah Nenni-Daher 2024-04-10 | * INFO HERE * This adorable pineapple gnome DIY is a fun project for an afternoon. I used fleece, faux fur, Poly-Fil and Poly Pellets, along with a wood half round and some embroidery thread to put this guy together with a hot glue gun.

Get the Stout Gnome Pattern: shop.rufflesandrainboots.com/product/stout-gnome-pattern-bonus

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:19 - Materials
0:45 - Body
1:45 - Hat
5:53 - Details and Embellishments
8:39 - Gnome Beard and Nose

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

How to Create a Material Test xTool XCS 2.0 / Laser Material Test / XCS Tutorial / EastSet Library

Sarah Nenni-Daher 2024-04-04 | * INFO HERE * Learn how to create a smart material test array using xTool software, XCS 2.0. The new features of 2.0 allow us to test material for OUR laser using the pre-loaded samples provided in the EasySet Panel, a new xTool feature.

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

My Lasers and Free Laser Software:
xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool S1 (40w): xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
xTool M1 (10w): xtool.com/products/pre-order-xtool-m1-worlds-first-desktop-hybrid-laser-blade-cutting-machine?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
XCS Software (Free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtool #xtoolxcs #xtools1 #xtoolp2 #xtoolm1
As an Amazon Associate, I could earn from qualifying purchases.

Light Up Wood Gnome / Wood Gnome DIY / Lighted Gnome / Easy Gnomes DIY

Sarah Nenni-Daher 2024-04-03 | * INFO HERE *
Get the Free Newsletter Here: rufflesandrainboots.com/go/email-signup

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:23 - Supplies
1:21 - Drill Holes
4:02 - Sand, Paint, Seal
9:19 - Gnome Beard and Trim

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

DIY Teacup Gnome / No Sew Teacup Gnome / Easy Spring Gnome / Thrift Store Makeover / UPcycle DIY

Sarah Nenni-Daher 2024-03-27 | * INFO HERE * Make a DIY Teacup Gnome for Spring Decor
Make this adorable teacup gnome after rummaging through the tableware at the thrift store. This miniature teacup and saucer come together in about 10 minutes with basic craft supplies.

Get the Full, Printable Tutorial: rufflesandrainboots.com/diy-teacup-gnome

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:27 - Materials
2:16 - Gnome Body
5:19 - Gnome Beard and Nose
7:22 - Teacup Gnome Hat

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Easter Tokens Laser Cutting / Free Easter SVG / XCS 2.0 Tutorial / xTool Wood Score Engrave Cut

Sarah Nenni-Daher 2024-03-26 | * INFO HERE * Get the free SVG!
Use the free, Easter tokens SVG with a commercial license to create the cutest non-candy egg filler idea! Let the laser do all of the work with score, engrave, and cut functions.

Learn how to set up a material test array in XCS 2.0 using the EasySet Panel as a guide for the parameters.

Get the xTool P2: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer&variant=44483079536879

Get the Full Tutorial and Free SVG: rufflesandrainboots.com/easter-egg-tokens-laser-free-svg

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:13 - Import and Layers
0:25 - Ways to Set Material Settings
2:24 - EasySet Panel for Test Grids
5:36 - Thickness and Close View Camera

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#lasercutting #xtool #xcs #laserproduct #eastercrafts
As an Amazon Associate, I could earn from qualifying purchases.

XCS 2.0 Tutorial / Laser Safe Vinyl on Acrylic / How to Design and Create Cupcake Toppers

Sarah Nenni-Daher 2024-03-21 | * INFO HERE *
Learn how to create these adorable cupcake toppers using a couple of simple materials and ANY laser, CO2 or diode. I used the xTool P2, 1/8th acrylic, and laser safe vinyl with adhesive to make these in less than 15
minutes.

Helpful Links:
Free Easter Basket Tag SVGs:
Pale Yellow 1/8th Acrylic: xtool.com/products/1-8-baby-yellow-pastel-acrylic-sheet-3pcs?_pos=5&_sid=bfc81b797&_ss=r&ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
Laser Safe Vinyl: smokeyhilldesigns.com/products/patternply%C2%AE-pastel-plaid-2

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
x

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolp2 #xcs #xtool #lasercutting
As an Amazon Associate, I could earn from qualifying purchases.

No Sew Spring Gnome / Long Hat Gnome / Shelf Sitter Gnome / Glued Gnome Pattern / DIY Gnome

Sarah Nenni-Daher 2024-03-20 | * INFO HERE *

Wild Gnome Pattern: shop.rufflesandrainboots.com/product/wild-gnome-pattern

Lovey Pattern (Also Great for Shipping): shop.rufflesandrainboots.com/product/icelandic-lovey-gnome-cut-file-set

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
x

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Spring Gnome / Topiary Gnome / Dollar Tree Spring / Spring Craft 2024 / Easy Topiary DIY

Sarah Nenni-Daher 2024-03-13 | * INFO HERE *
Make this adorable and fun little topiary gnome for Spring! Use the following supplies and a glue gun to make this quick craft idea.

Get the full tutorial here (and printable): rufflesandrainboots.com/topiary-gnome-diy

Newsletter Sign Up: rufflesandrainboots.com/go/email-signup

Supplies:
- Dollar Tree Floral Cone
- Dollar Tree clay flower pot
- Sheet Moss amzn.to/3PkqWd8
- Scrap of Faux Fur amzn.to/43dfXbt
- Mini florals
- Hot glue gun, scissors

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome #springgnome
As an Amazon Associate, I could earn from qualifying purchases.

xTool P2 Review and Projects / Acrylic Laser Crafts / xTool P2 CO2 Laser Review / Best CO2 Laser

Sarah Nenni-Daher 2024-03-12 | * INFO HERE *
Makeblock sent me the xTool P2 CO2 laser to review and compare with my diode lasers. In this video, I'll share what I think about the machine, what it can do, and what I would change.

Shown In Review:
-xTool P2 55W CO2 Laser: xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
- Inline Fan: xtool.com/products/xtool-inline-duct-fan?_pos=1&_sid=0e657b758&_ss=r&ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
- Splitter: strungovercreations.com
- XCS Software (free): xtool.com/pages/software?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer

Get the Full Review: rufflesandrainboots.com/xtool-p2-review-and-projects

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:39 - Machine Set Up
1:45 - Venting Set Up
2:40 - Testing
3:50 - Laser Projects to Make and Sell
8:49 - XCS Software
12:50 - What I Would Change

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolp2 #xtool #co2laser
As an Amazon Associate, I could earn from qualifying purchases.

Easter Treat Jar / Free Gnome Pattern / Dollar Tree Easter Gnome / Free Treat Jar Pattern / Easter

Sarah Nenni-Daher 2024-03-06 | * INFO HERE *
Create the cutest little treat jar using Dollar Tree supplies, felt, and a scrap of faux fur.

Get the free gnome pattern here: drive.google.com/file/d/1Dnk7YkwvMNUzz0i6FGMZnIrsUrIHqQ6Q/view?usp=sharing

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:24 - Supplies
0:49 - Gnome Hat
2:08 - Gnome Beard
4:04 - Bunny Ears

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Easter Basket Tags are quick ways to earn with your laser. #lasercutting #laserengraving #xtools1

Sarah Nenni-Daher 2024-03-06 | Learn how to use the xTool S1 to create beautiful acrylic and wood Easter basket tags. Get the file here: drive.google.com/drive/folders/1MDuG2MASYPAKvVbQeZjdQnpLdNW2fBRG?usp=sharing

Easter Laser Craft / Free Laser SVG / Easter Basket Tag SVG / Wood Easter Tag / Acrylic Easter Tags

Sarah Nenni-Daher 2024-02-29 | * INFO HERE *
Get these Easter basket tag SVG files for wood and acrylic laser cutting and laser engraving crafts. This Easter laser craft idea is a quick project to practice with a new wood or acrylic.

Free Easter Basket SVG Files (4 Designs): drive.google.com/drive/folders/1VWgnv4wlTOxb8t8sFLHEC_SQ6C4bPQ2E?usp=sharing

Tools and Materials:
- xTool S1: xtool.com/products/xtool-s1-laser-cutter?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer
- 3mm Basswood Plywood
- 1/8th Acrylic (Sage and Amethyst) https://i.refs.cc/417vt2zs?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxODgxMDc5Nzc2fQ%3D%3D
- Ribbon
- 3M and/or Glue

Get the Full Tutorial: rufflesandrainboots.com/laser-easter-basket-tags-svg

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:31 - How to Design in XCS
1:40 - Material Settings
3:16 - Load Material and Process
6:05 - Clean and Final Assembly

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtools1 #xtool #lasercutting #laserengraving #laser
As an Amazon Associate, I could earn from qualifying purchases.

Easter Egg Gnome / No Sew Easter Gnome / Gnome Shoes / Gnome Tennis Shoes / Sitting Gnome DIY

Sarah Nenni-Daher 2024-02-28 | * INFO HERE *
This cute Easter gnome is made with a flocked egg, faux fur, and some Dollar Tree gnome making supplies like baby shower favors and a pillow. This cute egg gnome with tennis shoes comes together in about 20 minutes using a hot glue gun.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:21 - Supplies
0:53 - Gnome Tennis Shoes
2:14 - Gnome Beard
7:02 - Gnome Hat and Assembly

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome #eastergnome
As an Amazon Associate, I could earn from qualifying purchases.

xTool Screen Printer Projects / Lessons Learned / Tips for Clean Engraving and Inking / xTool S1

Sarah Nenni-Daher 2024-02-22 | * INFO HERE * xTool sent me the screen printer addition and it was so much fun to test out and review. Here are some projects for a bit of inspiration and tips learned while using this fun laser addition.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:18 - Supplies
0:36 - Wine Bag
6:11 - Glowing 2 Color Tote
6:39 - Email Sign Up

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtools1 #xtoolscreenprinter #screenprinting
As an Amazon Associate, I could earn from qualifying purchases.

Easter Bunny DIY / Fuzzy Bunny for Easter / Easter Craft / Ways to Use Faux Fur / Bunny Craft

Sarah Nenni-Daher 2024-02-21 | * INFO HERE *
This fuzzy Easter bunny is perfect for a tiered tray, an Easter basket, or to pop onto the mantle. You will need:
- a fur pom pom
- faux fur scrap
- fleece
- wood nose and embroidery thread whiskers
- wire
- X-Acto, scissors, hot glue gun

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:29 - Supplies
1:48 - Base
2:17 - Ears
4:20 - Get the Emails
8:05 - Bunny Whiskers
8:44 - Finish

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Valentine’s Day DIY in minutes #xtools1 #lasercutting #valentinesday #valentinesdaycraft

Sarah Nenni-Daher 2024-02-14 | Learn how to use the xTool S1 to cut wood heart locks and patterned flex to make the cutest Valentine or Anniversary laser project.

Dollar Tree Gnome / Dollar Tree Easter Gnome / Pillow Gnome DIY / Easter Bunny Gnomes DIY

Sarah Nenni-Daher 2024-02-14 | * INFO HERE *
This adorable bunny gnome is made from a Dollar Tree pillow. Take about 15 minutes and use some fleece, pompoms and a glue gun to put together this adorable Easter gnome for the holiday.

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

Easter Egg Gnome / No Sew Easter Gnome / Standing Easter Bunny Gnome DIY / Quick Easter Craft Idea

Sarah Nenni-Daher 2024-02-07 | * INFO HERE * This cute little bunny gnome for Easter is a quick crafting win. Use a premade Easter egg, some fur, and some fleece to create a standing bunny gnome with a cute little tail.
You will need: an egg, wire, fleece, fur, a wood ball, something for whiskers, and a heart (or other base). Grab a hot glue gun and let's get to making this absolutely adorable Easter gnome for Spring.

Hot Glue Gun*: amzn.to/47VDVZl
Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:32 - Supplies
1:37 - Prepare Bunny Ears
7:18 - Glue Egg Body to Base
9:45 - Gnome Beard, Whiskers, and Nose
13:48 - Decorate

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #eastercrafts #gnomes
As an Amazon Associate, I could earn from qualifying purchases.

Needed some earrings… #xtools1 #xtool #lasercutting #lasermachine #acrylicearrings

Sarah Nenni-Daher 2024-02-06 | Learn how to make acrylic earrings with the xTool S1 40 watt diode laser. You can cut acrylic with a diode!

xTool Screen Printer Review, Tips, and Project Ideas / Multi-Color Screen Printing Kit / xTool S1

Sarah Nenni-Daher 2024-02-05 | * INFO HERE *
The xTool screen printer is out and available and it is SO MUCH FUN! I've worked on many designs, including some that push the boundaries of traditional screen printing. Be sure to subscribe to get all of the screen printer projects I've made with the xTool S1 and the screen printer set up!

Get the Screen Printer Set Up: xtool.com/products/xtool-screen-printer-1st-screen-printing-solution-with-laser?ref=FOa8dfQBE0X30&utm_medium=4965&utm_source=influencer&variant=44288777486575

Read the Full xTool Screen Printer Review and Tips: rufflesandrainboots.com/xtool-screen-printer-review-and-project-ideas

In This Tutorial:
0:00 - Introduction
0:28 - Unboxing
1:36 - Machine and Screen Set Up
3:40 - Design in XCS
6:29 - Tips for Engraving / Clean Up
8:10 - Screen Printing
11:42 - Future Projects

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtools1 #xtoolscreenprinter #laserengraving
As an Amazon Associate, I could earn from qualifying purchases.

Funny Valentine Laser Cutting Project / Valentine SVG / xTool S1 / Basswood Plywood Settings

Sarah Nenni-Daher 2024-02-01 | * INFO HERE *
Use this free xTool S1 tutorial to create a funny Valentine laser cut project in just a couple of minutes. Whether you make one or a hundred, the Cupid is Stupid SVG comes with a free commercial license!

Get the Free SVG: shop.rufflesandrainboots.com/product/cupid-rhymes-with-stupid-svg
Get the Full Tutorial: rufflesandrainboots.com/cupid-rhymes-with-stupid-svg-free

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
x

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#lasercutting #xtools1 #valentinesdaygift
As an Amazon Associate, I could earn from qualifying purchases.

Make a Standing Gnome #valentinesday #gnomes #diygnome #poolnoodle

Sarah Nenni-Daher 2024-02-01 | ...

Mini Felted Sock Gnomes / Free Gnome Hat Pattern / Valentine Gnome Tutorial / Dollar Tree Gnome DIY

Sarah Nenni-Daher 2024-01-31 | * INFO HERE * This set of gnomes is easy to come together with a bit of felt and this free gnome hat pattern.

- Needle Kit amzn.to/3DvkU22
- Felting Pad amzn.to/3jsEDXZ
- My Favorite Wool Set amzn.to/3zI9yVS
- Gnome Hat Pattern: drive.google.com/file/d/1iByD2rwmrpOWgHEXRUN9X1xN9tjcbDnZ/view?usp=sharing

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:33 - Supplies
2:00 - Create the Gnome Hats
9:00 - Create the Gnome Bodies

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnome
As an Amazon Associate, I could earn from qualifying purchases.

🚨 Quick craft alert! DIY Valentine gnomes ?no pattern, no sew) #diygnome #gnometutorial

Sarah Nenni-Daher 2024-01-30 | ...

Make. Dollar Tree Gnome Using This Free Pattern #gnometutorial #dollartreediy

Sarah Nenni-Daher 2024-01-29 | ...

Cut Vinyl with Laser / Safe Vinyl and Acrylic Laser Tic Tac Toe / Dollar Tree Laser DIY / Valentine

Sarah Nenni-Daher 2024-01-27 | * INFO HERE *
Learn how to cut vinyl safely with a laser to create this cute tic tac toe game for Valentine's Day. This beginner laser idea is a quick project (25 minutes) and will have you working with HTV (Heat Transfer Vinyl) and two colors of acrylic. Learn how to make a test grid in xTool's XCS software to get clean acrylic cuts with a diode laser.

Get the Full Tutorial: rufflesandrainboots.com/safe-laser-cut-htv-tic-tac-toe-craft

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
x

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#beginnerlaser #lasercutter #laserengraving #valentinesdaycraft #xtools1
As an Amazon Associate, I could earn from qualifying purchases.

White Acrylic with a Diode Laser / Laser Crafts for Valentines Day / Beginner Diode Laser Project

Sarah Nenni-Daher 2024-01-25 | * INFO HERE *
Today, I'll be sharing how to make this fun white acrylic heart ornament with a diode laser. I'll be sharing how to easily layer acrylic without the mess of glue. This beginner diode laser craft tutorial only takes about 20 minutes to set up, laser cut, and assemble.

Get the Full Tutorial: rufflesandrainboots.com/laser-cut-white-acrylic-ornament
Get the XOXO Y'all SVG: shop.rufflesandrainboots.com/product/xoxo-yall-svg-valentines

Check Out My Favorite Laser Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:19 - How to Design in XCS
3:05 - How to Cut White Acrylic with a Diode Laser
8:59 - Assemble Ornament

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#lasercutting #lasermachine #xtools1 #beginnerlasercraft
As an Amazon Associate, I could earn from qualifying purchases.

Make these adorable standing gnomes for Valentine’s Day.

Sarah Nenni-Daher 2024-01-25 | ...

How to Create a Pattern / How to Make a Gnome Pattern / DIY Gnome / Stop Stealing My Stuff

Sarah Nenni-Daher 2024-01-24 | * INFO HERE *
Today's tutorial is a bit different. I'll be showing you how I create a gnome pattern and get it ready for sale. Learn the RIGHT WAY to create a pattern to sell and not use someone else's work.

To Support My Original Creations: shop.rufflesandrainboots.com/product-category/gnome-patterns

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:01 - Sketch
2:55 - Fabric Considerations
3:26 - Begin CAD (Cardboard Aided Design)
4:22 - First Fabric Cuts / Re-Cuts
6:30 - Notes and First Pattern Pieces

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#diygnome #gnometutorial #gnomepattern #freegnomepattern
As an Amazon Associate, I could earn from qualifying purchases.

Make this sweet gnome couple for Valentines Day. #gnometutorial #diygnome

Sarah Nenni-Daher 2024-01-23 | ...

Highland Cow Ornament SVG / How to Use XCS / Laser Cut Ornament Ideas / Beginner Laser Projects DIY

Sarah Nenni-Daher 2023-12-21 | * INFO HERE *
This adorable highland cow ornament wears a Santa hat and has a tuft of faux fur for the iconic look. This easy beginner laser project idea is made in just a few minutes. In this tutorial, you will learn how to use XCS software to create an ornament and manipulate pre-made or purchased SVG files to make them into ornaments.

Get the SVG Only: shop.rufflesandrainboots.com/product/scottish-highland-cow-svg-santa-hat

Get the Full Tutorial: rufflesandrainboots.com/highland-cow-ornament-svg

Check Out My Favorite Supplies: amazon.com/shop/rufflesandrain

In This Tutorial:
0:00 - Introduction
0:18 - XCS Software Tutorial
4:12 - How to Use the xTool M1
6:26 - Clean and Assemble Ornament

Let's Stay in Touch:
Facebook Group: facebook.com/groups/diygnomesandcrafts
Pinterest: pinterest.com/momtoelise/_created
Follow on Facebook: facebook.com/rufflesandrainboots

Mailing Address:
Sarah Nenni-Daher, Ruffles and Rain Boots
PO Box 653
Leander TX 78646

#xtoolm1 #lasercutting #lasermachine
As an Amazon Associate, I could earn from qualifying purchases.