カミカラ KAMIKARA
Paper geneva drive zoetrope 紙のゼネバ機構式ゾートロープ
updated
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
Data is sold at BOOTH.
https://kamikara.booth.pm/
You can download the paper pattern PDF from here.
haruki1967.wixsite.com/kamikara/%E3%83%80%E3%82%A6%E3%83%B3%E3%83%AD%E3%83%BC%E3%83%89
厚さ0.22〜0.25mmの紙に印刷してください。
Print on paper with a thickness of 0.22-0.25mm.
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
BGM : MMT38
mmt38.info
Data is sold at BOOTH.
https://kamikara.booth.pm/
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
BGM : MMT38
mmt38.info
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
これは僕の初期の作品で作った時はまだ20世紀でした。
シルエットデザインストア用に復活させました。
当時は白紙の状態だったのですがそれだとちょっと物足りないので地球にしました。
This was my early work and it was still in the 20th century when I made it.
I revived it for the silhouette design store.
At that time, it was a blank slate, but it was a little unsatisfactory, so I made it the earth.
Data is sold at BOOTH.
https://kamikara.booth.pm/
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
動画をアップしていなかったことに気がついたので慌てて作成しました。
This work was made about 10 years ago.
I noticed that I didn't upload the video, so I made it in a hurry.
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
Illustratorを使ってない人にはわかってもらえないかもしれません。
急に思い出したので動画にしました。
It's an idea that came up about 25 years ago.
People who are not using Illustrator may not understand it.
I suddenly remembered it, so I made a video.
データはBOOTHで販売しています。
Data is sold at BOOTH.
https://kamikara.booth.pm/
Data is sold at BOOTH.
https://kamikara.booth.pm/
必要な材料
M3×8mmイモネジ 2本
M4×20mmイモネジ 3本
輪ゴムNo.16(直径 約40mm)
Required materials
2 M3 x 8mm set screw
3 M4 × 20mm set screw
Rubber band with a diameter of about 40 mm
印刷した部品にバリがあると上手く動きません。
バリはキレイに取り除いてください。
If there are burrs on the printed parts, it will not work properly.
Please remove the burr cleanly.
I tried to reproduce the scene of the dome.
データはBOOTHで販売しています。
Data is sold at BOOTH.
https://kamikara.booth.pm/
Data is sold at BOOTH.
https://kamikara.booth.pm/
必要な材料
M3×6mmイモネジ 24本
M3×5mmナベネジ 8本
Required materials
24 M3 x 6mm set screw
8 M3 × 5mm pan screw
印刷した部品にバリがあると上手く動きません。
バリはキレイに取り除いてください。
If there are burrs on the printed parts, it will not work properly.
Please remove the burr cleanly.
Data is sold at BOOTH.
https://kamikara.booth.pm/
You can download the paper pattern PDF from here.
haruki1967.wixsite.com/kamikara/%E3%83%80%E3%82%A6%E3%83%B3%E3%83%AD%E3%83%BC%E3%83%89
厚さ0.25mmの紙を使用してください。
Use 0.25 mm thick paper.
輪ゴムのサイズはNo.16です。
直径38mm(半分に折りたたむと60mmになります。)
The size of the rubber band is No.16.
Diameter 38mm (When folded in half, it becomes 60mm.)
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
This is a work when I was still an office worker in 2004.
この作品は第10回ユポ・デザイン大賞優秀賞をいただきました。
フリーBGM素材「ハッピーイレイロ」by こおろぎ
シルエットデザインストアでシルエットカメオ用の型紙を販売しております。
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
ゼネバ機構を使用したゾートロープです。
ゾートロープといえばスリットや鏡やストロボを用いたものは
よく見ますが、ゼネバ機構でもできるのではないかと閃いて
試してみたら上手くいきました。
Nobody has done this yet, right?
A zoetrope that uses the Geneva drive.
Speaking of zoetropes, those using slits, mirrors and strobes
I often see it, but I wondered if it could be done with the Geneva drive.
I tried it and it worked.
データはBOOTHで販売しています。
コンテンツは三種類ついています。
オリジナルのアニメを作るためのプレーンな従動車のデータ付きです。
Data is sold at BOOTH.
Three types of content are included.
Comes with plain driven wheel data for making original animations.
https://kamikara.booth.pm/
I made a nautilus machine out of wood.
I made it with a 3D printer.We started selling data at BOOTH.
https://kamikara.booth.pm/
印刷したもの以外に直径3mmのアルミパイプかアルミ棒、直径22mm厚さ1.6mmのワッシャー(M6用)が必要です。
BOOTHでデータ販売を始めました。
We started selling data at BOOTH.
https://kamikara.booth.pm/
I made it with a 3D printer.We started selling data at BOOTH.
https://kamikara.booth.pm/
We sell patterns for silhouette cameos at the Silhouette Design Store.
silhouettedesignstore.com/view-artist/5857509
シルエットカメオ silhouette CAMEO
silhouettejapan.jp/?gclid=CjwKCAjwn6GGBhADEiwAruUcKrJeQ3PO9IUrA4ELoctbql-ff6Qm65b_D4Zb8u4GCEZnOp40OcHp4hoC6w0QAvD_BwE
BOOTHでデータ販売を始めました。
We started selling data at BOOTH.
https://kamikara.booth.pm/
3Dプリンターで作りました。
後半に出てくる「並列ドミノ」を最初に作りました。
なんかもうちょっと手を加えたいと思って丸くしたのが中盤に出てくる旧バージョンです。
ピースがピザのようだったのでドミノピザのパロディみたい感じでタイトルをピザ・ドミノにすることにしました。
しかし組んでみるとイマイチピザに見えないので現在のような感じにしました。
結構分厚いピザになりましたが。
こうなるとタイトルをケーキドミノにした方がぴったりのような気もしますがピザ・ドミノのタイトルが気に入ったのでそれで行くことにしました。
I made it with a 3D printer.
I made the "parallel domino" that appears in the second half first.
I wanted to make some changes.
So I made it round. That is the "old version" that appears in the middle.
The piece was like pizza, so I chose the title Pizza Domino.
A parody of Domino's Pizza.
However, when assembled, it doesn't look like pizza.
So I made it feel like it is now.
It's a fairly thick pizza.
I think it would be better to change the title to "Cake Domino", but I liked the title of "Pizza Domino" so I decided to go with it.
The second half is my hobby.
You can download the paper pattern PDF from here.
haruki1967.wixsite.com/kamikara/%E3%83%80%E3%82%A6%E3%83%B3%E3%83%AD%E3%83%BC%E3%83%89
This is a sphere, but while I was playing, I thought that it could be done with a regular dodecahedron.
So I made it.
amazon.co.jp/%E7%B4%99%E3%81%AE%E3%81%8B%E3%82%89%E3%81%8F%E3%82%8A-%E3%82%AB%E3%83%9F%E3%82%AB%E3%83%A9%E3%81%A7%E3%83%9F%E3%83%8B%E3%82%AA%E3%83%B3%E3%81%A8%E9%81%8A%E3%81%B6-%E3%83%A6%E3%83%8B%E3%83%90%E3%83%BC%E3%82%B5%E3%83%AB/dp/4048964593/ref=sr_1_4?__mk_ja_JP=%E3%82%AB%E3%82%BF%E3%82%AB%E3%83%8A&dchild=1&keywords=%E3%82%AB%E3%83%9F%E3%82%AB%E3%83%A9&qid=1597234533&sr=8-4
amazon.co.jp/%E7%B4%99%E3%81%AE%E3%81%8B%E3%82%89%E3%81%8F%E3%82%8A-%E3%82%AB%E3%83%9F%E3%82%AB%E3%83%A9%E3%81%A7%E3%83%9F%E3%83%8B%E3%82%AA%E3%83%B3%E3%81%A8%E9%81%8A%E3%81%B6-%E3%83%A6%E3%83%8B%E3%83%90%E3%83%BC%E3%82%B5%E3%83%AB/dp/4048964593/ref=sr_1_4?__mk_ja_JP=%E3%82%AB%E3%82%BF%E3%82%AB%E3%83%8A&dchild=1&keywords=%E3%82%AB%E3%83%9F%E3%82%AB%E3%83%A9&qid=1597234533&sr=8-4
BGM SHW URL:http://shw.in/
しかし既存のものを作っても面白くないのでもう1つアイデアを追加できないか考えているうちに思いつきました。
I made it with a 3D printer.We started selling data at BOOTH.
https://kamikara.booth.pm/
PDFファイルはこちらからダウンロードできます。
haruki1967.wixsite.com/kamikara/%E3%83%80%E3%82%A6%E3%83%B3%E3%83%AD%E3%83%BC%E3%83%89
The PDF file can be downloaded from here.