Bearded Builds CoAvoid being unprepared and accepting a job that you are not sure if you can even complete. I see it day in and day out people posting in groups needing help, and settings because they accepted a job and they ONLY HAVE ONE. No room for error! Don’t be that guy! Have a plan!
Avoid the Biggest Beginner Laser Mistake!Bearded Builds Co2024-12-08 | Avoid being unprepared and accepting a job that you are not sure if you can even complete. I see it day in and day out people posting in groups needing help, and settings because they accepted a job and they ONLY HAVE ONE. No room for error! Don’t be that guy! Have a plan!
Amazon Products I use: amazon.com/shop/beardedbuildscoHow to Clean the Lens and Mirrors on you Co2 Laser #lasercutting #laserengravingBearded Builds Co2025-10-13 | ...Big sale on the OneLaser XRF! Discount code - LASERGUYS #laserengraving #lasercuttingBearded Builds Co2025-10-12 | ...How to Clean Your Laser Lens & Mirrors | Hydra 13 Maintenance for Peak PerformanceBearded Builds Co2025-10-11 | Keeping your laser clean is the secret to maximum power, precision, and cut quality. In this video, I’ll show you exactly how to clean your mirrors and lens on the Hydra 13 laser (or any CO₂ laser) to keep it running at top performance.
You’ll see how I safely clean mirror #1, mirror #2, the laser head mirror, and the lens using 99% isopropyl alcohol and lint-free swabs — plus the simple routine I follow to avoid power loss, burn marks, and poor engraving results.
This step-by-step laser maintenance guide will help you: ✅ Clean your laser mirrors and lens safely ✅ Prevent smoke buildup and debris from reducing power ✅ Know which direction to clean (and why you should avoid circular motions) ✅ Reassemble your laser head correctly (flat side of the lens faces down!) ✅ Keep your laser cutting crisp and clean day after day
Whether you run a Hydra 13, OneLaser X-Series, or any other CO₂ gantry laser, this cleaning routine will extend the life of your optics and give you consistent results.
👉 Don’t forget to Like, Subscribe, and hit the bell for more laser maintenance tips, LightBurn tutorials, and project ideas!
OneLaser Community: Https://facebook.com/groups/onelaserSave Your Laser Projects with Cut Shapes in LightBurn | Fix Bad Wood & Glue StreaksBearded Builds Co2025-09-16 | Ever had a project ruined by bad wood, knots, or glue streaks? 😬 In this video, I’ll show you how to use the Cut Shapes feature in LightBurn to save your project without wasting time or material. Instead of re-cutting the whole design, you’ll learn how to isolate the problem area and re-run just that section until it’s cleanly cut.
This real-life demo walks you through step by step how I fixed a project on my Hydra laser using cheap plywood that had stubborn glue streaks. The Cut Shapes tool is one of my go-to tricks in LightBurn, and once you know how to use it, you’ll never stress over bad spots in your material again!
What you’ll learn in this video:
How to spot problem cuts caused by knots or glue streaks
Why you shouldn’t move your project or laser head until the fix is ready
Step-by-step tutorial on using Cut Shapes in LightBurn
How to isolate specific sections of your design for re-cutting
Saving time and material by only cutting what’s needed
👉 If you’ve ever run into issues with plywood, MDF, or other materials not cutting all the way through, this video will help you troubleshoot and save your projects.
👍 Don’t forget to Like & Subscribe for more LightBurn tips, Hydra tutorials, and laser engraving projects!
OneLaser Community facebook.com/groups/onelaserOneLaser Hydra Upgrade | Install Compressor Air Assist for Cleaner Cuts & EngravingBearded Builds Co2025-09-02 | In this video, we’re upgrading the Hydra 13 laser with a compressor-based air assist system! 🚀 If you do a lot of cutting, having high airflow is essential for cleaner cuts, reduced char, and minimal smoke or flare-ups. This guide will walk you step by step through installing and wiring the OneLaser air assist module so your Hydra is ready for both engraving and cutting.
We’ll cover everything you need to know — from bypassing the stock solenoid, wiring the relays into the controller, routing airlines, and setting up regulators, to dialing in your PSI levels for low-flow engraving and high-flow cutting. I’ll also show how to integrate air assist controls directly into LightBurn, so toggling air on/off in your layer settings automatically switches between low and high flow.
What you’ll learn in this video:
Why a compressor air assist is better than stock pumps for cutting
Full installation of the Hydra air assist module (airlines, relays, wiring)
How to bypass the stock solenoid and properly connect airlines
Setting up PSI with dual regulators for engraving vs cutting
How LightBurn automatically controls high vs low airflow
Tips for clean cuts, less char, and safer operation
👉 If you’re running a Hydra or any CO₂ laser, upgrading to a compressor air assist is one of the best improvements you can make for performance and cut quality.
Don’t forget to Like, Subscribe, and hit the bell so you don’t miss more Hydra tutorials, LightBurn guides, and laser engraving projects!
Join the OneLaser Community! https://Facebook.com/groups/onelaserHydra 13 Laser Setup (Part 5) | Connect to LightBurn & Run Your First ProjectBearded Builds Co2025-08-28 | Welcome to the final part of the Hydra 13 Laser Setup Series! 🎉 In this video, we’ll connect the Hydra 13 laser to LightBurn 2.0, enter the proper scanning offsets, and run our very first engraving project.
With the latest versions of LightBurn, you no longer need to use RDWorks for setup—making it faster and easier to get your Hydra operational. I’ll walk you through every step, from adding your device in LightBurn, enabling dual laser controls (glass tube + RF tube), and correctly entering the scanning offsets provided by OneLaser to ensure clean, accurate engraving.
By the end of this video, your Hydra 13 will be fully connected, configured, and ready to create! 🚀
What you’ll learn in this video: • How to connect the Hydra 13 to LightBurn 2.0 (no RDWorks needed) • Correct device setup and enabling Laser 1 (glass) & Laser 2 (RF) • Entering and applying scanning offset values for sharper engraving • Why it’s important to switch to millimeters before entering offsets • Running your first LightBurn test project on the Hydra 13
👉 Don’t forget to Like, Subscribe, and hit the bell for more tutorials on Hydra accessories, LightBurn features, alignment, and advanced engraving projects.
Join the OneLaser Community! https://Facebook.com/groups/onelaserHydra 13 Laser Setup (Part 4) | Controller Overview & Beam Alignment CheckBearded Builds Co2025-08-20 | In Part 4 of the Hydra 13 Laser Setup Series, we dive into the controller functions and perform a laser beam alignment test to make sure your machine is ready for its first project. If you’re setting up a OneLaser Hydra or any CO₂ laser, this step is critical for accuracy, safety, and consistent engraving results.
We’ll walk through each controller menu, explain the most important features (manual movement, file loading, diagnostics, presets, autofocus, origins, framing, external devices), and show how to use the built-in alignment tools to verify both your glass tube and RF tube are perfectly aligned. You’ll also see where adjustments can be made on the mirrors if needed, and why proper alignment ensures precise cutting and engraving every time.
👉 Next up in the series: Connecting LightBurn and running our very first project!
Join the OneLaser Community! https://Facebook.com/groups/onelaserHydra 13 Laser Setup | Part 3 - Installing Inline Fan, Air Pump & Water ChillerBearded Builds Co2025-08-17 | Ready to power up your Hydra Laser Machine? 🚀 In this step of the setup series, I’ll walk you through everything you need to know about installing and connecting the essential Hydra 13 accessories—inline duct fan, air pump, and water chiller—before running your first project.
We’ll cover critical details like why you need a 20 amp breaker for stable power, how to properly position your inline fan for best exhaust performance, and the step-by-step process for hooking up your air assist pump and CW chiller. I’ll also show you how to correctly mix and fill your chiller with distilled water and propylene glycol, set it to constant temperature mode, and configure the controller so your air pump and exhaust fan operate the way you want.
By the end of this video, you’ll have your Hydra machine powered on, accessories running, axes moving (X, Y, Z), and your cooling system dialed in. Next up: controller overview and alignment testing so you’re ready for your very first engraving or cutting project!
👉 Don’t forget to like, subscribe, and hit the bell for the next videos in this Hydra setup series.
What you’ll learn in this video: -Why Hydra lasers need a 20 amp outlet (and what adapters work) -How to install an inline duct fan and proper airflow direction -Setting up the stock air pump and connecting air assist tubing -Mixing distilled water with propylene glycol for your chiller -Configuring chiller modes (intelligent vs constant temp) -Setting the laser controller to run air pump + exhaust fan full time -Powering on your Hydra and verifying axis movement
👍 If you found this helpful, don’t forget to like, subscribe, and hit the bell 🔔 for more laser reviews, tips, and tutorials!Hydra 13 Laser Setup Part 2 – Unwrapping, Inspection & Accessories Overview (OneLaser)Bearded Builds Co2025-08-13 | What’s going on everybody! In this video, we’re continuing the Hydra 13 setup series by unwrapping the machine, inspecting it for any shipping damage, and reviewing all the included accessories. 🚀
Before powering up any new laser, it’s crucial to inspect the crate, machine body, laser tubes, and internal components to make sure everything arrived in perfect condition. I’ll walk you through:
✅ Checking the outside of the Hydra 13 for dents or damage ✅ Inspecting the glass CO₂ laser tube and metal RF tube ✅ Reviewing the power supplies, drivers, and control board ✅ Looking over all the included accessories – from air pumps and ducts to the extra nozzle and lens tools ✅ Highlighting the must-have chiller for glass tube models (5000 series or higher)
I also share some quick tips on what to expect in the box, what’s included vs. add-ons, and how to make sure you’re ready for the next step: powering up and connecting your Hydra laser.
👉 Stick around because in the next video, we’ll set up the accessories, connect everything, and power on the Hydra 13 for the very first time!
If you’re new here, don’t forget to like, subscribe, and hit the bell 🔔 so you don’t miss the rest of the Hydra 13 setup series.
👍 If you found this helpful, don’t forget to like, subscribe, and hit the bell 🔔 for more laser reviews, tips, and tutorials!OneLaser Hydra 13 Unboxing & Setup Guide (Part 1) | Laser Machine Crate RemovalBearded Builds Co2025-08-11 | Unboxing the OneLaser Hydra 13 | Step-by-Step Setup Series (Part 1)
What’s going on everybody! Welcome to the first video in my Hydra 13 setup series. Today, we’re unboxing the OneLaser Hydra 13 laser machine straight from the crate and walking through exactly how to get it safely unloaded and ready to roll.
In this video, you’ll see:
How the Hydra 13 arrives and what’s included in the crate (toolbox, water chiller, air ducting, accessories).
Step-by-step tips for prying open the shipping crate safely.
How to use the built-in casters and a DIY ramp method to get a 1,000-lb machine off the pallet without heavy equipment.
Real-world tricks to make unloading possible with just two people.
If you’re new to the Hydra series or considering buying your first OneLaser machine, this video will give you a clear look at what to expect when unboxing and setting up.
👉 Stay tuned for Part 2 and beyond, where we’ll continue the setup process so you can get your Hydra laser running smoothly!
💡 Thinking about buying a OneLaser X Series or Hydra machine? Use code LASERGUYS at checkout for a discount and to support the channel and our partners at Edmond’s Wood Shop and Wright’s Woodworks.
📌 Don’t forget to Like, Subscribe, and hit the Bell so you don’t miss the rest of the series!
Timestamps: 00:00 Intro 01:00 What’s inside the Hydra 13 crate 02:35 How to safely remove the crate panels 04:20 Building a ramp from the shipping panels 06:10 Rolling the Hydra 13 off the pallet 08:15 Tips for moving large laser machines without a forklift
Join the OneLaser Community on Facebook! facebook.com/groups/onelaserEasy Money Personalizing Journals on the Omni1Bearded Builds Co2025-08-02 | In this video, I go over how I personalize journals on the ComMarker Omni1. I include how to line them up, focus, the settings, and some considerations.
UV lasers are great for products like this because they have a light touch and mark the surface rather than removing material.
Non-Amazon and a little smaller but cheaper bulklaser.com/products/pu-leather-a5-journal?variant=49138349801665Co2 Laser Maintenance - Clean Your Honeycomb BedBearded Builds Co2025-07-17 | In this video, I run through my routine on cleaning my honeycomb bed for my Co2 Laser. A dirty bed can become problematic, especially when your goal is a clean finished product. The residue on the bed can burn onto the back of your projects and even make your cuts suffer. 
Things you will need: -Water source -efficient degreaser (LA Awesome used here) -pressure washer -possibly a scrub brush
If you were looking for help with laser selection or laser operation, I highly recommend joining one of these groups where I’m active almost daily.
OneLaser machines: 1laser.com/laserguys 3% Discount code - LASERGUYSCommunity Question - Lightburn Material Test SetupBearded Builds Co2025-06-05 | This video addresses a community question involving the material test function in Lightburn. The video goes over the different parts of the material test and how to make changes to those.
OneLaser machines: 1laser.com/laserguys Referral code - LASERGUYSTumblers FAST on Co2 Galvo #laserengraving #personalizedgifts #smallbusinessBearded Builds Co2025-05-22 | ...Perfect Laser Beam Alignment | OneLaser X Series TutorialBearded Builds Co2025-04-22 | Perfect Laser Beam Alignment | OneLaser X Series Tutorial
Having trouble dialing in that perfect beam? In this step-by-step guide, we show you exactly how to align your laser beam on the OneLaser X Series like a pro. Whether you're cutting, engraving, or just getting started, a well-aligned laser is key to precision and power.
What you’ll learn:
How to check if your beam is off Simple tools & tricks for quick alignment Pro tips to keep your laser running smoothly Common mistakes (and how to avoid them) If your cuts are weak, inconsistent, or just not as crisp as they should be—this video is for you.
Don’t forget to: Like, comment with your setup or questions, and subscribe for more OneLaser hacks, tips, and mods!
LASERGUYS- https://Facebook.com/groups/thelaserguysOMNI1 | ComMarker Rotary Setup Walkthrough with PiBurn Grip | Step-by-Step GuideBearded Builds Co2025-03-10 | In this video, we walk you through setting up the OMINI1 with the PiBurn Grip for seamless rotary engraving by setting for the best steps per rotation with Lightburn’s rotary test feature.
Piburn lensdigital.com/aff/35 5% discount code - BEARDEDBUILDSWhy did they buy a Hydra 9??? | Hooks Design Co X OneLaserBearded Builds Co2025-02-26 | Join Josh from @wricogoods and I as we chat with Taran from Hooks Design Co about their new Hydra 9 from @OneLaser.Official. He shares about why they picked OneLaser, the ease of setup, thoughts after a couple weeks of running the machine, and what projects they do with their machine.
Join the Official OneLaser Facebook Group Facebook.com/groups/onelaserPrep a Stack Cut Name Sign in Lightburn | Boolean SubtractBearded Builds Co2025-02-25 | I this video a do a quick walk through of how to use the Boolean subtract in Lightburn to prep this stacked name file for the laser.
Install Your OneLaser XT | XRF Air Assist From Liberty ControlsBearded Builds Co2025-02-23 | In this video, I’ll walk you through the liberty controls air assist and how it should be installed on the X series machine from OneLaser. This video features my XRF machine specifically and there may be small variations from this to the XT model. The reason that you would want to upgrade your air assist is to improve the cleanliness of your cuts and to have more control over how much air is flowing for your engravings.
Join the LASERGUYS Community! facebook.com/groups/thelaserguysIs OneLaser Your Next Laser? | Best Laser In 2025Bearded Builds Co2025-02-15 | I think that @OneLaser.Official is arguably the best laser that you can buy for the price. If you are just starting out or if you are a seasoned laser business, there are options that are right for you.
View a section of Amazon products that I use. Amazon.com/shop/beardedbuildscoAir Assist??? Why Upgrade???Bearded Builds Co2025-02-09 | Let’s take a close look at why you might want to upgrade your laser’s air assist to a compressor driven system.
Increasing the air flow makes your cuts more efficient leaving you with a cleaner top surface saving you time in your finish work. You also have the ability to control the air flow and reduce down to a trickle of air when engraving so that you are not pushing soot into your fresh engraving.
OneLaser Machines 1laser.com/laserguys Code - LASERGUYSWhat is a GALVO laser? Fiber, UV, Co2, and DiodeBearded Builds Co2025-01-25 | What is a GALVO laser? Fiber, UV, Co2, and Diode Galvo refers to the head of these lasers. You can has serveral different laser sources in a galvo platform such as Fiber, UV, Co2, and Diode.
Bigger and better Galvos - Emily with BWM Laser Message Emily and let her know Brandt at Bearded Builds sent you: facebook.com/EmilyBWMMy Sales Jumped When I Started Doing This! Think BIGGER!!! Think Volume and Land Bigger SalesBearded Builds Co2025-01-23 | Think BIGGER!!! Think Volume and Land Bigger Sales
Volume usually does the following -Saves time -Gets you volume discounts -Is an opportunity to build relationships with repeat customers
Amazon Amazon.com/shop/beardedbuildscoOneLaser XRF batching out flags #laser #woodworking #smallbusinessBearded Builds Co2025-01-20 | ...Omni1 | UV Galvo Laser from ComMarker Initial ReviewBearded Builds Co2025-01-19 | Checking out the Omni1 - UV Laser from ComMarker. This laser is a fairly compact model where everything is included in the base with no external control boxes. No issues with the delivery or packaging. Laser itself set up quickly and functions as expected. It was nice to see some additional features like the materials library that was already included from ComMarker. This machine has a wide variety of materials that it can mark and interact with making it very universal, especially for the promotional products industry. 
LaserGuys Laser Community facebook.com/share/g/15uHYf17rY/?mibextid=wwXIfrHow do they compare??? Xtool P2 | OneLaser XRFBearded Builds Co2024-12-16 | Comparison of the @xToollaser P2 and @OneLaser.Official X series. Close look at the specs and a simple project to compare results.
Max speed was the focus test P2 - 600mm/s XRF - 1200mm/s
OneLaser Facebook Group: facebook.com/share/g/15E4eMtW2y/?mibextid=K35XfPNew Release! OneLaser, the one laser you need?Bearded Builds Co2024-10-09 | Check out the website and current pricing when it goes live here: https://www.1Laser.com/LASERGUYS Or your can deliberately assign credit for you purchase using the code LASERGUYS at check out.
Join the official Facebook community and keep the conversation going here: facebook.com/share/g/xf27TDtioFR11534Sign Making with CNC and LasersBearded Builds Co2024-09-18 | In this video I walk you through the process of making a custom award sign. It involves the use of my cnc and co2 laser. You could make this same sign is so many different ways and this process is the path I took.
CNC - @OnefinityCNC elite foreman
Laser - @omtechlaser 150w pro hybrid Discount code - BEARDEDBUILDS5OFF
Amazon affiliate store - Amazon.com/shop/beardedbuildscoRecreating a logo in LightBurnBearded Builds Co2024-08-10 | In this video I take a pretty simple image logo and use the tools in LightBurn to hand trace the lines. Circle tool, line tool, and node edit knock this out pretty quick leaving you with clean curves and no extra nodes.
For more content like this check out my LightBurn Course here: course.beardedbuildsco.com/storeAlign Integrated Beam Combiner / Align Red DotBearded Builds Co2024-07-14 | Learn how to align an integrated beam combiner for optimal performance. This tutorial covers setup, optical alignment, and fine-tuning techniques to achieve precise beam overlap and maximize system efficiency.
OMTech lasers Discount code BEARDEDBUILDS5OFFLightburn Boolean Operators - Union, Intersect, Subtract | Name Sign FileBearded Builds Co2024-05-27 | Boolean Operators are called a lot of this but ultimately they are tools used to help you use multiple objects to create other objects. In this video I use the boolean operators to make a name or address sign file to be cut on the laser.
To lean more check out my full Lightburn Course here: course.beardedbuildsco.com/storeFix Your Blurry Engravings | Lightburn Scanning Offset AdjustmentBearded Builds Co2024-04-05 | Fix Your Blurry Engravings | Lightburn Scanning Offset Adjustment Blurry engravings, sloped edges, and double images in an engraving are all signs that you likely need to set up some scanning offsets!
OneLaser Machines 1laser.com/LASERGUYS 3% discount code - LASERGUYSLearn Lightburn! Overview!Bearded Builds Co2024-04-02 | course.beardedbuildsco.com/store Master Lightburn Ready to unleash your creativity and bring your ideas to life like never before? Introducing our comprehensive Lightburn course, your ultimate guide to mastering laser engraving and cutting!
🚀 What You'll Learn:
Master Lightburn Software: Dive deep into Lightburn, the industry-leading software for laser control. From basic setup to advanced techniques, you'll become a Lightburn pro in no time. Laser Fundamentals: Understand the principles of laser engraving and cutting, including materials, settings, and safety measures. Design Techniques: Learn how to create stunning designs, manipulate images, and optimize settings for perfect results every time. Project Tutorials: Get hands-on with a variety of exciting projects, from personalized gifts to intricate artwork. Follow along step-by-step and watch your creations come to life. 💡 Why Choose Our Course:
Expert Instruction: Led by experienced laser enthusiasts, our course provides clear, concise instruction and insider tips to accelerate your learning. Interactive Learning: Engage with practical exercises, quizzes, and real-world projects to reinforce your skills and boost your confidence. Lifetime Access: Gain unlimited access to course materials, updates, and community support. Learn at your own pace, whenever and wherever you want. Join a Thriving Community: Connect with fellow learners, share inspiration, and get feedback on your projects in our vibrant online community. 🎓 Who Is This Course For:
DIY Enthusiasts Artists & Designers Small Business Owners Hobbyists Anyone eager to explore the endless possibilities of laser technology! 👉 Ready to elevate your creativity and take your laser skills to the next level? Enroll now and embark on an exciting journey with our Lightburn course!
14-17 of March Piburn Rotaries are on sale for $50 off and you can get another $50 off with the code BEARDEDBUILDS.
$100 off! If you have been wanting one now is the time because LensDigital does not do sales often!
lensdigital.com/homeOMTech Pro 150w Hybrid - Metal Cutting on a Co2 LaserBearded Builds Co2024-02-17 | OMTech Pro 150w Hybrid - Metal Cutting on a Co2 Laser
With the release of the new pro line from OMTech the Hybrid offers the feature of metal cutting!
In this video I’ll go over what you need and how to set up to make your first metal cuts on the Pro Hybrid
I recently purchased a piburn grip from @lensdigital1 and I have to say, it is the most versatile rotary out there! Small to large object, no problem with the grip jaws!
Get yours using my affiliate discount: BEARDEDBUILDS
If you are an OMTech user there is also an option to purchase through OMTech for a rotary that will carry the OMTech brand and be compatible with your machine’s in out.
OMtech Discount code - BEARDEDBUILDS5OFFPiburn grip - Dog bowl Discount - BEARDEDBUILDSBearded Builds Co2024-01-18 | Grip a dog bowl with the Piburn Grip from Lens digital! #affliate #piburn #lensdigital
Discount code- BEARDEDBUILDSMirror Replacement on a Co2 Laser | American PhotonicsBearded Builds Co2024-01-04 | After the beam leaves the tube of your Co2 laser, your mirrors are the first contact that can potentially rob your beam of power!
I noticed a premature failure of the mirrors on my machine so let’s walk through the process of replacing them together.
I trust American Photonics for all of my mirrors and lenses for my machines and you should too!
Affiliate stuff- American Photonics Discount code- BEARDED
First off, I purchased this printer, and it was not supplied to me for a review. The purpose of this printer for me is to create jigs for my Laser projects and random things around the house.
From unboxed to print it was probably about 30 minutes and most of that was waiting for the first calibrations to take place. All in all I love the enclosure, the bed size, and of course the speed of the printer. After doing my first handful of prints I would recommend this printer to anybody that is in a similar situation to me.
Amazon affiliate store Amazon.com/shop/beardedbuildscoOMTech Pro Hybrid Laser Head | Lens Cleaning and Nozzle ChangeBearded Builds Co2023-12-04 | The OMTech Pro Hybrid has a redesigned laser head with a new lens holder and special nozzles for non-metal and metal operations.
Let’s take a look at how to take the lens out and change the nozzles.
-This new line features a fresh new design of the cabinet which is more sturdy and appealing to the eye.
-Servo motors on the x and y axis are the drive system behind this machine which is an upgrade that will push speeds up to 1200m/s.
-Upgraded x and y rails for clean and concealed operation.
-Built in S&A RMCW - 5200 chiller industry standard equipment and space saving.
-Redesigned laser head and lens management system.
-Head lifter system on the 150w hybrid for metal cutting operations. Nozzle setup for non-metal and metal operations.
-Air flow sensor for safe operation and managing air issues.
-Built in air assist / oxygen flow assist solenoid control.
-4 way pass through
-Improved internal exhaust ducting and extraction.
Amazon Affiliate Store: Amazon.com/shop/beardedbuildscoBearded Builds Co Live StreamBearded Builds Co2023-11-27 | ...Omtech Pro Co2 Laser - Dialing in Wood Cut Setting and Cutting Stupid StuffBearded Builds Co2023-11-23 | In this video I use the @omtechlaser pro Co2 laser to dial-in cut settings for wood products. I also show a sample of cutting three-quarter inch MDF and even a 2 x 4.
The OMTech Pro shown in this video is a 150 W hybrid with a 36 x 55 bed. So far I’ve been really impressed with the build quality of this machine and its capabilities. Finding efficient cut settings is super important when running your laser as efficiently as possible. In this video I show a couple of test cards that are already premade and also how do use, the Lightburn material test feature.