Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
A few years back, I was working with this producer who set up a pretty decent home studio.
Good gear, perfect listener and speaker placement, solid room treatment – the works.
But his mixes? They still didn’t sound right outside the studio.
We went through his setup and found the missing link – speaker calibration.
We did it together. The difference was huge. His mixes started translating perfectly on every system – car speakers, headphones, laptops, you name it.
That’s all it took in his case. Everything else was already in place!
You might be surprised, but even though I’m “the acoustics guy”, I’m actually all for using speaker calibration.
It is just one step in the treatment process. It’s not the end-all, be-all. But especially in your home studio, it can really tie everything together.
Kind of like mastering a song before it goes out into the wild.
You want that quality checking and polish that really makes it shine.
This is why I made my latest YouTube video. I get tons of emails asking about speaker calibration – how to use it, when to use it, and if it’s worth it.
So, I thought I’d put together a quick step-by-step masterclass.
Here’s a sneak peek:
- When to Use Speaker Calibration: Why it’s the final step in your studio treatment process and when to re-calibrate.
- How to Use Calibration Systems: Tips to get the best results without losing your speaker’s headroom.
- Types of Calibration Systems: My take on automated systems like SonarWorks and those from Genelec and Neumann.
- Manual Calibration Tips: How to adjust parametric EQ settings yourself.
Studio Speakers: Master ROOM CORRECTION (speaker calibration) in your home studio STEP-BY-STEPAcoustics Insider2024-07-24 | ►► Download the FREE Home Studio Treatment Framework and get everything out of your roomand speakers → acousticsinsider.com/home-studio-treatment-framework
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
A few years back, I was working with this producer who set up a pretty decent home studio.
Good gear, perfect listener and speaker placement, solid room treatment – the works.
But his mixes? They still didn’t sound right outside the studio.
We went through his setup and found the missing link – speaker calibration.
We did it together. The difference was huge. His mixes started translating perfectly on every system – car speakers, headphones, laptops, you name it.
That’s all it took in his case. Everything else was already in place!
You might be surprised, but even though I’m “the acoustics guy”, I’m actually all for using speaker calibration.
It is just one step in the treatment process. It’s not the end-all, be-all. But especially in your home studio, it can really tie everything together.
Kind of like mastering a song before it goes out into the wild.
You want that quality checking and polish that really makes it shine.
This is why I made my latest YouTube video. I get tons of emails asking about speaker calibration – how to use it, when to use it, and if it’s worth it.
So, I thought I’d put together a quick step-by-step masterclass.
Here’s a sneak peek:
- When to Use Speaker Calibration: Why it’s the final step in your studio treatment process and when to re-calibrate.
- How to Use Calibration Systems: Tips to get the best results without losing your speaker’s headroom.
- Types of Calibration Systems: My take on automated systems like SonarWorks and those from Genelec and Neumann.
- Manual Calibration Tips: How to adjust parametric EQ settings yourself.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Have you fallen down the bass trap rabbit hole yet? 🙂
You know, that fun place where you start googling bass traps and suddenly find yourself 47 tabs deep in forum discussions about different shapes, sizes and materials?
Square "soffit style" traps, triangular "superchunks", panels across corners... it's like a geometry test gone wrong.
I remember when I first tried to figure this out and oh boy, was my brain smoking.
"There's got to be some secret sauce here," I kept thinking. "Some hidden wisdom that makes one shape better than the others."
And it doesn't help that every other person on Gearspace seems to be swearing by a different design.
"Superchunks or die!"
"No way, soffit style is the only way!"
"You're both wrong, just stick a panel across the corner and call it a day!"
(Sound familiar? 😅)
But here's the thing that literally nobody talks about: The shape actually matters way less than you'd think.
It all comes down to two simple factors that determine how well any bass trap works.
And once you understand these (which took me years to figure out, so don't feel bad), choosing the right shape for your room becomes dead simple.
Let me show you what I mean.
Timecodes: 00:00 - Introduction: Bass Trap Shapes Comparison Guide 00:21 - Common Bass Trap Designs: Square, Triangle, and Panel Explained 01:56 - The Truth About Bass Trap "Secret Sauce" 02:21 - Fundamentals: How Bass Absorption Actually Works 02:35 - FREE GUIDE: Complete Bass Trap & Bass Trapping Guide (Download Link) 03:36 - Two Key Factors That Determine Bass Trap Performance 04:23 - Shape Comparison: Square vs Triangle vs Panel Bass Traps 07:21 - Material Efficiency: Same Volume, Different Results 08:36 - Air Gap Benefits: Why Panel Design Can Outperform 10:29 - How to Choose: Performance vs Space vs Budget 11:26 - COURSE: Build a Better Bass Trap (Link in Description) 12:15 - Conclusion: Choosing the Right Bass Trap for Your Room
LIVE Q&A: Got questions about why your mixes sound great in your studio but fall apart everywhere else? Join acoustic treatment expert Jesco for an open "Ask Me Anything" session about studio acoustics, room treatment, and getting your mixes to finally translate.
❓ Bring your questions about: - Home studio acoustic challenges - Bass trapping and treatment placement - Speaker positioning problems - Room layout and design - Real-world acoustic solutions that actually work - Or any other studio acoustic topics!
🎸 Perfect for you if: - Your mixes sound different everywhere you play them - You're not sure if you can trust what you hear - You're dealing with muddy, boomy, or washy bass - You're working in a challenging room shape - You want practical, no-nonsense acoustic advice
⚡ This is a LIVE Ask Me Anything session - bring your specific questions and let's solve your acoustic challenges together. No question is too basic or too complex!
✨ Special end-of-year offer revealed during the stream!
⭐ About Jesco: Founder of Acoustics Insider, specializing in practical acoustic solutions for home studios. Known for taking the confusion out of room treatment and helping producers and engineers achieve professional results in real-world spaces.
#homestudio #studioacoustics #mixingtips #acoustictreatment #roomacoustics #basstraps #musicproduction #mixingStop Wasting Money on Acoustic Treatment (Do This First)Acoustics Insider2024-12-18 | ►► Correctly set up your speakers, no matter what room you're in. Free workshop → acousticsinsider.com/phantom-speaker-test
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Ever caught yourself staring at Room EQ Wizard measurements until your brain starts smoking? 🙂
Yeah... been there.
I had this client a few years back who was completely obsessed with this tiny little 3dB dip at 80Hz... like, REALLY obsessed.
No matter how many times I tried telling him his room was actually already in the top 1% of home studios, he just wouldn't let it go.
It's kind of like going to a car dealership and saying "I want a really fast car" without knowing if you need it for drag racing or just looking cool at Starbucks...
(Pretty different requirements there, right?)
Here's the thing though: obsessing over measurements and chasing every little peak or dip isn't particularly useful if your mixes still don't translate.
And let's be honest, that's what we actually care about...
Turns out there are really just 4 simple questions you need to ask yourself to figure out if you need acoustic treatment at all.
And most importantly: what to focus on first to get the biggest bang for your buck in your mixes.
Let me show you what I mean.
Timecodes: 00:00 - Avoid This Common Home Studio Mistake 00:45 - Why Obsessing Over Room EQ Wizard Measurements is Wrong 01:15 - Fast Car Analogy: Asking the Right Questions 02:29 - Free Workshop: The Phantom Speaker Test 02:46 - How to Fix Low End Translation Problems in Your Mixes 04:24 - Speaker Boundary Interference (SBIR): What You Need to Know 05:02 - Floor Reflections and Stereo Imaging: The Science 06:06 - Judging Reverb and Depth in Your Mix Room 07:51 - Why Your Mixes Sound Hollow: Mid-Range Balance Issues 09:03 - Early Reflections: Impact on Mix Translation 09:53 - High End Clarity: Mixing Skills vs Room Acoustics 11:47 - The 4 Questions to Ask Before Buying Treatment 13:02 - Speaker Placement: Most Critical Step for Home Studios 13:37 - Outro: Free Phantom Speaker Test Workshop
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Ever heard about LEDE room design? That "magical" 80s approach that promised to solve all our acoustic woes?
I know, I know... if you go digging around Gearspace long enough, you'll find a thousand conflicting opinions about it.
Maybe you've even thought about trying it in your home studio (high five if you did!).
After all, if it worked for those massive million-dollar studios back then, surely it must work in our converted bedrooms and garages now... right?
Well, I've been geeking out over the original research paper by Don and Chips Davis.
And oh boy, did I find some interesting stuff.
Let's just say there's a pretty big difference between what worked in those giant control rooms and what's actually practical in our cozy home setups.
Remember that age-old wisdom about moving your speakers way out from the walls to "avoid early reflections"?
Yeah... about that... 🤦♂️
Time to separate fact from fiction and figure out what LEDE really means for us home studio folks.
Timecodes: 00:00 - What is LEDE? Understanding Control Room Design for Home Studios 00:28 - Origins of LEDE: From Research Paper to Modern Studios 02:13 - Free Download: Home Studio Treatment Framework Guide 03:33 - Early Reflections Explained: How They Affect Your Mix 05:45 - Understanding Comb Filtering in Home Studios 07:25 - Time Delay and Speaker Placement: Critical Factors 14:26 - Early-Early Sound (EES): Hidden Issues with Speaker Mounting 18:46 - Speaker Decoupling: What Actually Works? 20:33 - Phantom Speaker Test: Free Mini Course Overview 25:17 - Common Studio Setup Myths Debunked 32:14 - Moving Speakers Away From Walls: Why It Doesn't Work 35:52 - Basic Room Treatment Myths: Rugs and Bookshelves 38:07 - Room Shapes for Bass Control: Rectangle vs. Custom 40:17 - LEDE Limitations for Home Studios 44:51 - Modern Approach to Room Treatment 46:07 - Conclusion: Practical Solutions for Home Studios
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Guess what? It’s Knowledge Bomb time again! 💣💥
In this latest video, I’m tackling your top acoustic questions and dropping some serious studio wisdom. If your bass is a mess, you’re lost with reflection points, or you’re just not sure if that fancy subwoofer decoupler is worth it, this one’s got you covered.
As always, I’m cutting through the fluff and breaking down the topics into bite-sized chunks that you can actually use in your studio. Check out what’s inside.
Timecodes: 00:00 - Introduction to Acoustics Insider and Knowledge Bombs 00:20 - Free Home Studio Treatment Framework Explained 02:08 - Phantom Center vs. Flat Bass Response: What's More Important? 05:02 - How I get rid of reverb in my YouTube videos 08:29 - Acoustic Treatment Materials: Understanding Density and Gas Flow Resistivity 11:08 - Rating Jesco's Home Studio: Acoustic Performance and Comfort 12:44 - Should You Decouple Your Speakers and Subwoofer? 15:43 - Using EQ with Loudness Compensation for Better Mixing 18:11 - The Mirror Trick for Acoustic Panel Placement: How to Find Reflection Points 20:24 - Low-End Management: Setting Speaker Cutoffs for Bass Control 25:11 - How to Align Subwoofers and Speakers Using REW 28:46 - Understanding Baffle Step: How Speaker Design Affects Sound
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
This is a high definition repost of the video with the same name.
Today, I’ve got a very special guest with me - Carl Tatz.
If you’ve been in the studio design world for any length of time, you’ve probably heard of Carl and his revolutionary Phantom Focus System.
Carl’s been at the forefront of studio design for decades, working with some of the biggest names in the industry.
And he’s here to drop some serious knowledge on us.
We’re diving into one of the most debated topics in home studio acoustics: Room Treatment vs. Speaker Tuning.
Which one really makes the biggest difference in your sound?
Is all that foam on your walls really doing the trick, or should you be focusing on getting your speakers dialed in perfectly?
Carl’s going to share his expert insights, practical tips, and maybe even challenge some of the common advice out there.
Whether you’re just starting to set up your home studio or you’ve been tweaking it for years, you’re going to want to stick around for this one.
Trust me, by the end of this video, you’ll have a whole new perspective on how to get the best sound out of your room.
Timecodes: 00:00 - Studio Designer Carl Tatz on Acoustics Insider 01:13 - Home Studio Treatment Framework FREE 02:26 - What is the phantom center? 06:54 - Stereo sound and the floor reflection. 09:21 - The “God Spot” 13:04 - Placing subwoofers 14:14 - Back wall resonance absorption 16:13 - Side wall treatment: the acoustic lens 18:53 - The Carl Tatz studio design approach 25:33 - When are you “done” with acoustic treatment? 32:38 - Dual subwoofers 36:35 - Front wall vs back wall treatment 37:47 - Tracking room acoustics 39:24 - Making the room and the speaker disappear 41:17 - Soffit mounting speakers 44:40 - The importance of room ratios 47:59 - Phantom Focus System Speaker Roll Off 49:41 - Acoustic treatment for ATMOS systems 53:50 - Using multiple speakers
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Have you ever walked into your studio, looked at your sloped ceiling or angled walls, and thought, "Well, there’s no way this room will ever sound right..."?
Or maybe you’ve tried everything to fix the low-end in your oddly shaped room, but the bass still feels all over the place?
I get it.
It’s tempting to think that your weird room is just doomed to sound terrible forever.
But here’s the good news: fixing low-end issues in odd rooms is actually easier than you think. There’s no magic or voodoo involved—it’s all about following a few simple steps.
In my latest video, I’m breaking down the 4 key steps to fixing low-end problems, even in the strangest room setups.
Want to know the biggest lever for fixing bass in weird spaces?
You’ve got to nail down your listening position.
Sound familiar?
It’s where most people go wrong, but I’ll show you how to get it right and find that “sweet spot” in your room.
And that’s just step 2.
If you’re dealing with an oddly shaped room and weird bass issues, this video is for you.
I’ll walk you through everything from room mode chaos to speaker placement—and what to do if you still can’t get that low-end right.
Timecodes: 00:00 Why Your Odd Room is Ruining Your Bass 00:46 How Odd Shapes Mess with Low-End – Here's Why 02:19 Using Amroc to Spot Room Modes and Fix Bass 05:21 Find Your Room’s Low-End Sweet Spot (It’s Easier Than You Think) 09:40 Best Bass Traps for Oddly Shaped Rooms 11:16 When and How to Use Speaker EQ (Without Messing Up Your Sound) 13:51 Final Tips for Perfecting Low-End in Odd Rooms
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
You’ve probably seen this before – people showing off their studio builds with open insulation inside their walls, maybe even saying it doubles as bass trapping.
At first glance, it seems logical, right?
Why not combine soundproofing and acoustic treatment into one structure?
Less material, less space taken up – sounds like a win-win.
But here’s the thing: It doesn’t work.
And I used to wonder about this a lot too.
What happens if you try to combine them? Is it better for isolation or bass absorption? Or does it just end up…bad?
I’ve finally got the answer, and unfortunately, it’s not good news.
The two concepts – isolation and acoustic treatment – are almost working against each other when you try to combine them into one wall.
So what’s the best way to handle this?
In this week’s video, I’ll explain why combining soundproofing and bass trapping is a bad idea, and more importantly, what to do instead to make sure your studio sounds great without messing up either part.
Resources in this video: Master Handbook of Acoustics : Everest, F. Alton, Pohlmann, Ken C.: https://www.amazon.de/Master-Handbook-Acoustics-Alton-Everest/dp/1260473597/ref=sr_1_1?crid=3A99ZT99WEG0D&dib=eyJ2IjoiMSJ9.4sjNF9YJUUzTUXmLJMxOFgoPEx5_VGvjVS7gHli7odsD9UaY2Y0IiDveCqEPhvSl-JRncgdHD85wni9QaIF9ic4JW1NkOThMZQkxthuiQWq4TKK-2iQIKG5hh_6dll62cL5U2wD9JzF84eRNIGDQ-FkOfVDRsmm9NoCpp4xGcQrWu7VfANnIIREhwRLWyecghi9cR_ptS_HDhTYwG1zUAGwSEgrwC6UdZG2V5KfKkJQ.an6zqL6hxjfIH8IAPO4MiuwvWnb8RIPsbCCNU7IcLqQ&dib_tag=se&keywords=master+handbook+of+acoustics&qid=1726497426&sprefix=master+handbook+a%2Caps%2C146&sr=8-1
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Let’s be real—building your own bass traps sounds easy… until you start digging into insulation materials.
High-density? Low-density? 6,000 Pascals?
Before you know it, you’re knee-deep in forum posts with your brain ready to explode.
It often feels like everyone’s got an opinion, but none of them agree.
Believe me, I’ve seen it all.
Some folks swear by high-density insulation for bass traps.
Others say low-density is the only way to go.
So who’s right?
You want your traps to work, not just look good in the corner.
You don’t have time to waste on materials that won’t give you that clean, controlled low end.
And the wrong choice can cost you—Not just in money, but in weeks of frustration when your mixes STILL don’t translate.
So what’s the answer?
Here’s the good news: it’s actually simpler than most people make it.
In my latest video, I break down exactly what works and what doesn’t when it comes to insulation materials for DIY bass traps.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
So, you walk into your studio, clap your hands, and hear that zing flutter between the walls.
And now you’re convinced your mix can’t possibly translate properly, right?
Come on, it’s just flutter echo.
Sure, it’s a little annoying, but is it really that big of a deal?
If you’ve been relying on the clap test to diagnose your studio’s “problems,” let’s be honest—you probably know deep down that it’s not exactly the gold standard of acoustic testing.
But hey, who doesn’t love a good clap every now and then?
The thing is, flutter echo only shows up when sound bounces between parallel walls, and the clap test is often just telling you what you already know—or leading you to worry about things that really aren’t issues.
So why does everyone still do it?
Maybe it’s just habit, or maybe we all like to feel like we’re doing something useful with that satisfying clap.
But if you’re serious about getting your studio to sound right, you might want to dig a little deeper.
In my latest video, I show you a better way to test for flutter echoes—one that actually matters for your listening and recording positions.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Today, I’ve got a very special guest with me - Carl Tatz.
If you’ve been in the studio design world for any length of time, you’ve probably heard of Carl and his revolutionary Phantom Focus System.
Carl’s been at the forefront of studio design for decades, working with some of the biggest names in the industry.
And he’s here to drop some serious knowledge on us.
We’re diving into one of the most debated topics in home studio acoustics: Room Treatment vs. Speaker Tuning.
Which one really makes the biggest difference in your sound?
Is all that foam on your walls really doing the trick, or should you be focusing on getting your speakers dialed in perfectly?
Carl’s going to share his expert insights, practical tips, and maybe even challenge some of the common advice out there.
Whether you’re just starting to set up your home studio or you’ve been tweaking it for years, you’re going to want to stick around for this one.
Trust me, by the end of this video, you’ll have a whole new perspective on how to get the best sound out of your room.
Timecodes: 00:00 - Studio Designer Carl Tatz on Acoustics Insider 01:13 - Home Studio Treatment Framework FREE 02:26 - What is the phantom center? 06:54 - Stereo sound and the floor reflection. 09:21 - The “God Spot” 13:04 - Placing subwoofers 14:14 - Back wall resonance absorption 16:13 - Side wall treatment: the acoustic lens 18:53 - The Carl Tatz studio design approach 25:33 - When are you “done” with acoustic treatment? 32:38 - Dual subwoofers 36:35 - Front wall vs back wall treatment 37:47 - Tracking room acoustics 39:24 - Making the room and the speaker disappear 41:17 - Soffit mounting speakers 44:40 - The importance of room ratios 47:59 - Phantom Focus System Speaker Roll Off 49:41 - Acoustic treatment for ATMOS systems 53:50 - Using multiple speakers
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Ever feel like even after putting your bass traps in place the low end still feels a bit...off?
Maybe even that, no matter what you do, those standing waves just won’t behave?
Maybe you’ve stacked your traps floor to ceiling hoping that, “That should do it,” only to realize later that the results are still underwhelming.
Or perhaps you’ve used those slim panels that everyone swears by, and yet, your low end is still all over the place.
What if I told you that it’s not just about having bass traps, but how and where you place them?
Most people only focus on the vertical corners.
That’s a solid start, sure.
But it’s not the whole story.
The truth is, if you’re only using the vertical corners, you’re missing out on a big chunk of what those traps could actually be doing for you.
And that’s just one of the top five bass trap placement mistakes I see all the time.
In this week’s video, I break down these common mistakes and show you exactly how to fix them.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Ever felt like you’re chasing ghosts in your studio?
You know, when something sounds just a bit off, but you can't put your finger on why?
It’s frustrating, right?
I remember setting up my first studio in my spare bedroom. I was excited, had all my gear ready, but the sound just wasn’t clicking.
Having no idea what the cause was, my immediate reaction was:
“Maybe it’s a phase issue?”
2024 Jesco LOLs thinking about it now. 😂
So phase issues happen when two coherent signals overlap with a phase mismatch, causing interference.
That interference then creates a comb filter effect in your frequency response.
Now, I get it – this sounds a bit technical. But stick with me.
For a phase issue to be significant, the signals need to be of similar amplitude, and the phase mismatch needs to be 120 degrees or more.
Still with me?
Here’s where it gets interesting:
These phase issues are EVERYWHERE. All over your studio.
From reflections off your desk and floor to standing waves bouncing between your walls.
They’re everywhere.
Ever noticed how moving your head left to right while listening can give you this Chorus or Phaser effect?
That’s what a phase issue sounds like.
And if you’re using a subwoofer, phase alignment between it and your speakers is crucial to avoid interference.
Sounds like a lot to handle, right?
But how do you actually know if it’s actually an issue?
Well here’s the kicker: if it’s severe, you’ll hear it.
If you’re nodding along and thinking, "This sounds like my studio," then you need to watch my latest video.
In it, I break down everything you need to know about phase issues.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Do you know exactly how much you’ve invested in your acoustics?
Whether you're just starting out or looking to upgrade, knowing what your budget gets you in terms of sound quality is crucial so you don’t end up disappointed.
And should you DIY, go off-the-shelf, or hire a pro?
Turns out, knowing the right approach for your budget can save you headaches and cash.
Often what you’d LIKE to achieve and what is actually possible is quite different.
So in this week’s video I break down what you can expect for your money. From $100 to $100,000.
Think of it as your ultimate guide to budgeting for acoustic treatment.
No fluff, just straight-up, practical advice.
I cover everything from basic principles to advanced tips. And yes, I rate the sound quality you can achieve at each level.
Ever wondered how much low-end control you can get with $1,000? Or what happens when you hit $10,000?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Are you still confused about how to use LUFS correctly while mixing?
Be honest..
Tbh, I’m not surprised. And I bet you are not alone.
For some reason the narrative on loudness measurement has developed a life of its own that is often quite far removed from how to use it in practice.
Whenever I hear or read a new piece on the matter, the first question that always pops up in my mind is: Let’s see if this person actually ever understood loudness measurements, or if they fell in the same trap as everyone else.
And unfortunately, in 90% of the cases, they have no idea what they are talking about.
What somehow got lost completely is that measuring “loudness” in LUFS is NOT an absolute measure of perceived loudness.
It is STILL just a relative measure of volume.
Granted, it’s closer matched to how we humans perceive volume, but it’s still just measuring volume.
Nothing more, and nothing less.
Unfortunately.
The reason I know this as a fact is that I spent an entire semester back in university centered around this (then new) approach to quantifying loudness.
And one of things I did was implement the entire set of algorithms in Matlab to then analyze a database of recorded music to see if I could track the impact of the “loudness wars” over the decades in actual data.
A fun little exercise.
And totally pointless as I quickly found out, because “loudness” as measured by the EBU R 128 standard is not an absolute measure.
There is no way to compare the absolute loudness of a song on vinyl vs one on CD for example, because the level at which you digitize the vinyl will directly set its measured loudness.
Therefore there is no absolute “loudness” as measured by EBU R 128. You can just use a simple volume knob to set it where you want it.
BUT it is useful when trying to level-match two pieces of music relative to each other.
And that’s what I want to clarify in this week’s video.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Volume creep. It’s a real thing.
You know what I’m talking about.
It’s when you gradually turn up the volume throughout the session. Just a little bit more, and more, and more, one bit at a time.
Worst case: Until your ears are shot, your brain is fried, and you have no idea what is going on in the music.
But even if you’re just in the “volume knob fidgeting” camp, you’re not doing yourself any service.
Constantly messing with the mix volume is one of the most detrimental things you can do to your perception of the music.
In this week’s video I’m going to explain why that is, and then give you a simple 2 step process to:
- find the mix volume that works best for you - how to keep it constant - how to best use that in combination with reference tracks
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
It’s time for another YouTube Comments Knowledge Bomb!
As always, this is where I answer your questions from the YouTube comments.
Of course we’ve got chapters, so feel free to binge the whole thing, or jump to whichever question tickles you the right way first.
Timecodes: 00:00 - Intro 00:35 - FREE Home Studio Treatment Framework 02:09 - Low cut speakers to remove room modes? 03:43 - Peak @ 27Hz best solution 07:57 - Desk reflection affected frequencies 09:47 - Using room modes to counter peaks and dips? 11:25 - Why do some masters made on uber high end speakers sound terrible? 14:06 - PSI AVAA for low end control 15:09 - Can the computer screen affect depth perception? 18:22 - Tilt speakers up to reduce desk reflection? 21:21 - 100Hz to 400Hz build up 23:47 - Noise escaping through radiator
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
One of the often more surprising things about treating your room is this:
You go through all that effort of planning, building, moving, bleeding, sweating, crying and pushing on to find that at a first listen it sounds absolutely fantastic!
But the first mix still turns out like garbage.
And the second mix does as well.
Wasn’t the room supposed to translate properly now?
Did you do something wrong?
On a closer listen all your reference music still sounds great. But when you really pay attention certain weird things do pop out.
Maybe panning and width isn’t like you expected.
Or just the balance and placement of elements is quite different than how you used to hear it.
Like the placement of the vocal, or the smack of a snare drum.
You’re confused. What’s going on?
Well let me start by saying that this is actually completely normal!
Especially if the room sounded particularly bad previously, you likely conditioned your hearing to adapt in some very particular ways.
And it can take time to re-condition your hearing to the new setup.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Treating the bass in your studio is hard.
Especially the lowest octave.
To fully absorb 100Hz you theoretically already need 86cm (2’10”) of porous material depth (¼ wavelength rule).
Of course this is deep in voodoo territory, because what is technically true isn't even remotely necessary in practice.
I can assure you: If you were to cover your entire room in 86cm deep absorptive material, it would absorb FAR further down than 100Hz..
Still, how far down in frequency does it actually make sense to go in practice?
Is there even a point in absorbing lower down than the natural cutoff of your speakers, for example (@40Hz typically)?
What's a good target to set for your low end absorption?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Let’s say you are setting up a new home studio and the shape of the room is a bit odd.
This particular room has a sloped ceiling.
It starts off low on one end and rises up towards the other end of the room.
How do you best deal with that from an acoustics perspective?
Is there anything special to consider when setting up your speakers?
And how does it affect any treatment that you put in the room?
It’s easy to get a little put off by the thought that there might be something that you’re missing.
Or that there must be something particular you should do to really get the most out of the room and speakers.
So let me break it down for you in this week’s video.
To be honest, this same approach applies to any oddly shaped room. Whether it has an angled ceiling or angled walls for that matter.
At its core, it’s just a matter of divide and conquer.
Looking at the bass separately from the mids and highs we can get an idea how room modes change vs how reflection patterns are affected.
Resources in this video: Audieum Modal: Modal - The Ultimate Room Mode Calculator audieum.com/modal Amray Ray tracing: Amray - The Raytracing Sketchpad amcoustics.com/tools/amray
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
As promised last week, here’s part 2 of my interview with JOHN DARKO to get his take on high end speakers (think hypercars in the speaker world) and room acoustics.
And thanks again to everyone who submitted a question!
No-one I know has heard more speakers than John, so using his breadth of knowledge we talk through the following questions:
- The general sound of different speaker brands and high end vs budget - Tonal differences of cabinet materials - How to tell if a speaker is actually better - Is 1200€ enough for a speaker to mix and record? - Acoustic treatment vs room correction software - Match speaker size to room size for best mixing? - Do you still need acoustic treatment when using room correction software? - Is good sound quality only for the rich? - Best split between treatment, speakers, gear and cables - How to best learn your new space, speakers and headphones - Why aren’t coaxial designs like Geithain seen as reference class?
Timecodes: 00:00 - Intro 00:04 - Correct speaker positioning in an odd shaped room 00:10 - The general sound of different speaker brands and high end vs budget 07:32 - Tonal differences of cabinet materials 10:07 - How to tell if a speaker is actually better 23:18 - Is 1200€ enough for a speaker to mix and record? 26:18 - Acoustic treatment vs room correction software 27:06 - Match speaker size to room size for best mixing? 32:14 - Do you still need acoustic treatment when using room correction software? 36:33 - Is good sound quality only for the rich? 42:37 - Best split between treatment, speakers, gear and cables 43:47 - How to best learn your new space, speakers and headphones 55:35 - Why aren’t coaxial designs like Geithain seen as reference class?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
It’s finally here!!
My interview with JOHN DARKO, where he answers all the questions that YOU submitted on speakers, acoustics and all the intricacies and subtleties that only someone with as much listening experience as John can know.
So first of all: Thank you so much to everyone who submitted a question!
In fact I got so many that I decided to make this a two-parter.
In Part 1 we discuss:
- What audiophiles should know about mixing engineers - What to look for to get excellent sound imaging - Do measurements tell us how a speaker sounds? - What recording qualities ensure good sound on most speakers? - How much of what we hear is speaker, how much is the room? - How much treatment to hear the real difference between speakers? - The most common difference between high end speakers - Recommendations for reference tracks for mixing - Does mood affect how something sounds? - Coaxial driver layout vs standard speakers designs - Acoustics advice/recommendations based on John’s experience - Minimum price for speakers before investing in acoustics - Opinions on active bass traps like the AVAA C214
This was a really fun conversation with a trusted friend. And you can tell because we really dove DEEP into this ice berg of a nerdy subject.
Also keep an ear out for an announcement on my part on the PSI AVAA C214… ;)
Timecodes: 00:00 - Intro 02:44 - Correct speaker positioning in an odd shaped room 05:07 - John’s disclaimer 06:07 - What should mixing engineers know about audiophiles? 11:10 - What should audiophiles know about mixing engineers? 14:52 - What to look for to get excellent sound imaging? 16:36 - Do measurements tell us how a speaker sounds? 18:53 - What sound aspects are not captured by measurements? 21:44 - What recording qualities ensure good sound on most speakers? 27:18 - Placing the listening position facing the long wall. 30:56 - How much of what we hear is speaker, how much is the room? 31:32 - How much treatment to hear the real difference between speakers? 35:57 - Most critical part of the spectrum for production/mixing? 37:24 - The most common difference between high end speakers 39:13 - Recommendations for reference tracks for mixing 42:27 - Does mood affect how something sounds? 44:45 - Coaxial driver layout vs standard speakers designs 47:42 - Acoustics advice/recommendations based on John’s experience 53:52 - Minimum price for speakers before investing in acoustics 58:23 - Opinions on active bass traps like the AVAA C214
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
When was the last time you went down the acoustic treatment rabbit hole only to come out hours later with your brain on fire?
(Or just totally numb, followed by a confused nap..?)
I’m sure that’s what happened to our fellow sound nerd Lucas when he decided to shoot over an email.
In a nutshell he wanted to know what happens at the intersection of two room modes, when there’s a step in the geometry of the side walls and your listening position is placed exactly at the edge of this step.
If you’ve come across something similar, you’ll know exactly where Lucas is coming from.
Surely in front of the step, one room mode is created, and behind the step another one gets created?
How do you make sure that you don’t end up in a confusing mish-mash of these two room modes, and only have to deal with one of them instead?
It’s definitely an interesting question and solving this problem has more to do with getting back out of the rabbit hole and seeing the whole rabbit hill, instead of figuring out a solution while you are deep in it.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
When was the last time you tried a new compressor or EQ plugin?
Did it help to get your mixes to translate better?
It may absolutely have done, this isn’t a trick question.
What about the last time you got some new speakers or invested in some acoustic treatment?
Did that help with mix translation?
Or how about the last time you really took the time to learn a mixing technique better, like balancing, referencing or simply changing up your workflow?
What I’m getting at is that we often forget that mix translation isn’t dependent on that one single thing in your studio.
The whole “signal chain” of your studio, which includes YOU, needs to work properly in order to consistently and reliably churn out high quality music.
Still, it’s sooo easy to focus on one thing and almost blame it entirely on why your music doesn’t sound good.
Acoustics is a prime candidate.
And it may very well be the culprit!
But it’s just one component of your studio system that needs to be “good enough” in order to make the whole thing work.
That’s what I want to talk about in this weeks video.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
I always say: You can improve the sound in ANY room with acoustic treatment.
How FAR you can take things is another question. A lot of it depends on just how much space we are willing to sacrifice.
But the fact is: Some rooms are just more difficult than others.
And the location of doors and windows is one of the main factors that can really be a show stopper.
For example: What do you do when your room is basically a small long rectangle, but one end has the entry door, and the other end is a sliding glass double door leading to a balcony?
You literally CAN’T set up your speakers facing a short wall, because you either won’t be able to enter the room, or use the balcony.
What do you do?
Well, you set up your speakers facing the long wall obviously.
But then how far can you still take things with treatment? And bass trapping in particular?
That’s the challenge my student Thomas was facing.
And I’d say he did a fantastic job.
Timecodes: 00:00 - Case Study: Bass trap control in a DIFFICULT room (measurements) 01:14 - FREE GUIDE Home Studio Treatment Framework 02:03 - Problems finding the right room for a home studio 05:36 - “I never even used my Neumann speakers” 08:35 - “Now I was convinced the acoustic treatment will work” 11:11 - The difference that 20 panels makes 13:30 - “Sub bass still confuses me” 15:06 - Trouble with the subwoofer 19:29 - 3-way speakers vs 2-way with a subwoofer 20:50 - Building 20 bass traps in a living room 25:46 - “I have no wood working experience” 31:00 - Cost of building 20 bass traps 36:52 - Room EQ Wizard measurements 39:50 - Neumann MA1 speaker calibration 44:56 - Advice for DIY home studio acoustics
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
I think we’ve all heard the stories of people plastering their rooms with pyramid foam from Amazon.
Maybe you were even one of the lucky ones to try such a masterpiece yourself..? (high five)
Then you’ll know how bad such a “dead” space can be.
It’s absolutely awful.
It feels awful, it looks awful, it sounds awful.
And the natural consequence is to think: “I better not overdamp my room next time!!”
But this approach might actually be just as detrimental.
Of course I’m not implying that you SHOULD overdamp your room.
But you do need to HEAVILY damp your room.
Because what you do need is a “dry” room. Very dry in fact.
Otherwise you’ll always be at the mercy of your room’s distortion.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
You might be surprised to hear that I don’t recommend using alternative or eco-friendly insulation materials in your DIY bass traps and absorbers.
Despite the fact that there are plenty of examples out there of non-mineral wool products that are great at absorbing sound!
And especially, if you’re health conscious, surely they’re the better choice?
Right?
Well, my recommendation on this matter has little to do with the better health aspect or the sound absorbing properties of individual hemp or sheep wool products.
Then why do I STILL think you should stick to stone wool or fiberglass when you’re building your acoustic panels?
In a nutshell it’s because of:
- Accessibility - Reliability - Price
So if you’re thinking about using recycled jeans in your next acoustic build out, please watch this week’s video first.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt
Do you sometimes wish you could stop the need for referencing your mixes on other systems altogether?
Maybe because whenever you listen to a mix in your car, or your ear buds, you dread the unpredictability of something having gone totally wrong?
Well, rest assured, you’re not the only one.
But if you think that finally getting your studio treated is going to allow you stop having to listen to your mix on other systems:
Unfortunately I have to tell you - That’s not gonna happen.
But what WILL happen is that referencing actually becomes a really fun and gratifying process.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Let me paraphrase an email I get about 3 times a day:
“Jescooooo the low end in my room is messed up, what do I need to do!?!”
“But I can’t move my desk, it’s way too heavy, and the room also doubles as my office, my wife’s hobby room and storage for my pinball machine collection!”
“Basically I can’t change a thing..”
🤦
Obviously I’m being sarcastic.
But I’m sure you can feel the underlying truth as you’re reading this.
And to be honest, I don’t respond negatively to these types of emails, because we all have to go through this process to learn the all important lesson:
You can’t fix the low end once the room is done.
That’s because we need to attack the low end problem in our home studios from different angles that are all important:
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
I recently stumbled across this really small, understated Facebook post by audio interface manufacturer RME that led to an even more understated entry on their company forum.
They were simply announcing another feature update to TotalMix FX, the management software for their interfaces.
But what they added literally made me jump in my chair.
This was EXACTLY what I've wanted for years now.
And what I had always wondered why no interface manufacturer ever even spoke about:
Speaker calibration!
EQ, Delay, Volume. On all output channels.
Jaw dropping. I know. 😂
But I’m serious!
It’s actually so useful to have this available in a home studio, that I’d call it a game changer.
In fact it solves a problem, that we literally haven’t had ANY solution for so far:
Correct subwoofer integration. I bet you didn’t see that one coming.
Resources in this video: Room EQ and Crossfeed - Preview for UFX+, UFX II and UFX III owners (Page 1) — TotalMix FX — RME User Forum (rme-audio.de) https://forum.rme-audio.de/viewtopic.php?id=38411
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
If you've been down the rabbit hole of treating your studio, then you know:
It's suuuuuper easy to get lost in the process.
Often enough it can lead to just giving up.
Or maybe even worse: you end up obsessed about details that totally don't matter.
You endlessly turn in circles, trying everything under the sun to solve that one issue.
But you only figure out that it never mattered months later after once again: giving up..
I'd like to spare you this dilemma.
And in my opinion it has a lot to do with how you think about acoustics before you even get started.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Oftentimes the absolute WORST rooms to set up your home studio in are said to be perfect squares.
When the length and width (and sometimes height) of the room are the same, all the room modes pile up at the same frequencies and make getting a balanced low end close to impossible.
Stay away from such rooms at all costs!!!
So they say.. ;)
Of course in practice, even if the visible dimensions are close to identical, that’s usually not the end of the story.
If you know what you are dealing with and you are willing to take the necessary steps, it’s absolutely possible to get a good mixing environment, even if the room seems to be a perfect cube.
Case in point the studio in this week’s video.
Richie Whynne was willing to put in the work, and so he got the results.
Let me show you. Measurements and all.
Timecodes: 00:00 - Bass control in a small square room 00:32 - Mixing in a small room 03:09 - Why do acoustic treatment? 07:00 - How has the acoustic treatment improved the room? 11:52 - Did you think it was possible to achieve this result? 12:22 - The Build A Better Bass Trap online course 13:56 - Panel placement and designing the treatment plan 21:20 - Vocal recordings in the treated room 23:53 - First listen in the fully treated room 25:37 - Calibration with Sonarworks 28:04 - Tweaking the high end of the speakers 28:48 - Less low end after acoustic treatment? 39:26 - Building DIY bass traps 40:41 - Learning to mix in the treated room 44:32 - Lessons learned from DIYing acoustic treatment
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Have you heard about the 38 percent rule?
This is something that pops up a lot when you're researching speaker positioning, listener positioning and setting up a new room.
But I always thought this was really confusing when I first stumbled across this.
What 38 percent are we talking about here?
Is this talking about actually placing the speakers at 38 percent of the room?
Is it talking about the listening position?
When you dive into this thing it starts becoming really messy really quickly.
That’s what I want to clear up in this week’s video.
I want to explain to you what the 38 percent rule actually means, where it came from, what it's supposed to tell you and give you, and then show you what the limitations are and why there's actually a better way.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Thinking about studio acoustics can be confusing a.f.
Every little thing seems to affect every little other thing. And round and round we go.
If you then have some major part of the room causing a seemingly unsolvable headache, the question can quickly creep up:
“Is my room going to be a nightmare to treat?”
Is it even worth attempting anything at all, or should you maybe just look for a different option altogether?
So you go online, reading in forums and facebook groups about the issue.
Only to end up with your brain on fire and smoke coming out of your ears.
“Can someone PLEAAASSEE just give me a straight up answer!!?!”
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
It’s time for another YouTube Comments Knowledge Bomb!
As always, this is where I answer your questions from the YouTube comments.
Of course we’ve got chapters, so feel free to binge the whole thing, or jump to whichever question tickles you the right way first.
Timecodes: 00:00 - Get the FREE Home Studio Treatment Framework 01:47 - Do drum risers help the sound of drums when tracking? 04:31 - Room correction software effectiveness is low? 05:55 - Do very small rooms have standing waves? 07:43 - How did you mount the diffusor on the door? 08:12 - Best bass response is in the room corners? 09:33 - Do you want PHAT BASS? 09:56 - Smoothing settings for REW 11:57 - Multiple subwoofers to reduce standing waves 14:06 - Low pass filter monitors when connecting a sub? 16:43 - Decoupling speakers mounted to the ceiling? 19:41 - Neumann KH120 2 in small rooms? 20:25 - Guide on how to build bass traps?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
So I get some form of the following question with a regularity that I could set my clocks by it:
“I've done quite a bit of treatment in my room. I've got my speakers and my gear set up. I'm quite comfortable in the room and I've got enough panels to reduce the reverb and control early reflections.
But now I really need to fix the low end!”
Are you in that same situation? Was that you who sent me that email? ;)
But it wouldn’t be surprising!
I mean, the way we tend to start treating our studios is by looking online for some acoustic panels, putting them on the wall and then figuring out how to deal with our gear and speakers.
We tend to settle into that a bit, work with it until we realize: “You know what, the low end really doesn't work for me!”
And of course it’s also just a daunting task so it’s easy to keep pushing it up.
But there's a fundamental issue with approaching it this way.
Or rather, there's a mindset that I need you to get into in order to be successful on this journey of getting your low end under control.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
As we’re setting up a new studio in our spare bedroom, basement or attic there’s often this nagging thought of:
“Man, is this really gonna work..?”
The room is SO small. The ceiling is SUPER low. And the resonances in here are just OFF THE CHARTS.
Is it even worth doing anything at all?
In today’s video I want to show you just how much IS possible, even under what seems like the worst circumstances.
Together, we’re going to look at what just 10 bass traps can do to fix the low end in a small home studio.
And yes, I’ll show you all the measurements as well.
Timecodes: 00:00 - Home studio acoustic treatment with just 10 bass traps 02:20 - Genelec speaker calibration in an untreated studio 05:13 - Finding the low end sweet spot using the Bass Hunter Technique 07:30 - Problems mixing in the untreated room 11:04 - Deciding to do acoustic treatment 16:28 - Fear of making mistakes in the construction 22:05 - The impact of 10 acoustic panels in the room 26:44 - Mixing in the treated room 31:05 - Main benefit of acoustics: the shortened feedback loop 32:58 - Changes to acoustic treatment in the future 34:10 - Cost of the acoustic treatment 39:09 - Are 10 acoustic panels enough? 43:06 - Frequency response and waterfall improvements 48:28 - Genelec GRADE Report and calibration 56:49 - Impact of Genelec speaker calibration 59:13 - Was the Build A Better Bass Trap course worth it? 01:00:52 - FREE guide: Home Studio Treatment Framework
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
One of the odd things about home studios is..
well..
that they’re slightly odd.
Who here doesn’t have to deal with at least SOME random asymmetric feature in their room, like an inconvenient window, door or wall?
But how large is the impact of the typical asymmetric oddities in our home studios?
And is it worth the effort of fixing these before doing any acoustic treatment?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Are you hearing your low end properly?
Or there's some imbalance there that’s messing you up?
Maybe you've even done some measurements that revealed some bad dips in the frequency response.
Or your speakers are just really small and you want some more low frequency extension to get some more oomph from your system.
So now you're looking at different subwoofers wondering if this is the time to take the plunge.
You know what?
I’m all for it!
But I want you to be SURE that it’s actually the right decision.
So in this week’s video let me give you 3 things that you absolutely need to get right before investing in a sub.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Let's talk about flush mounting speakers.
This is where you basically build your speakers right into the front wall of your studio.
Maybe you've seen this around, especially from high grade mastering studios.
And if you've asked about speaker placement on some forum, somebody surely will have told you:
“You got to flush mount your speakers. It's the greatest thing in the world.”
So maybe you're thinking about this right now for your home studio, wondering if you should actually go through that effort of designing and building a setup where your speakers are flush mounted into the wall.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
There are a lot of options when it comes to controlling the low end in your studio.
But we hardly ever see them pitted against each other.
That’s because the effort involved is HUGE.
And so much can go wrong.
But someone who didn’t shy away from the challenge is Eric Valentine.
In his most recent YouTube videos he went to extreme lengths to show us what he tried, tested, through overboard and actually ended up using to treat his new studio.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
In my opinion there's one development in speaker system design that has largely been ignored by studio monitor companies:
Matching speaker directivity to a given space.
It's a little weird.
Designers of big venue sound systems have been developing and refining this technique for about 30 years now.
If you've ever looked at what they do you'll be excused to think us studio people are stuck in the stone age with our monitors.
It's THE main technique they use to NOT have to do any acoustics and still squeeze the best sound out of a particular space.
So why then haven't we seen this broadly adopted in the studio speaker industry?
My guess: it's simply been too expensive both to develop and sell.
It's also a very different use case so there's definitely a question to be raised about its applicability.
So then how do some of the (few) recent developments in controlled directivity studio monitors fare when it comes to reducing the need for acoustic treatment?
That's what I want to discuss in this week's video.
Acoustics Insider on Social Media: youtube.com/AcousticsInsiderKnowledge Bomb #9: Best 2nd Speaker Set, Bass Traps in Jescos Studio, Bass Trapping Limits etc.Acoustics Insider2023-08-16 | ►► Don't know which bass trap to get and where to put it? Get the FREE Complete Guide to Bass Traps → acousticsinsider.com/bass-trap-guide
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
It’s time for another YouTube Comments Knowledge Bomb!
As always, this is where I answer your questions from the YouTube comments.
Of course we’ve got chapters, so feel free to binge the whole thing, or jump to whichever question tickles you the right way first.
Timecodes: 00:00 - Intro 00:45 - FREE Complete Guide To Bass Traps And Bass Trapping 01:37 - Second set of speakers: IK Multimedia iLoud 04:03 - Dangers of too much bass absorption 06:25 - Jesco, how many bass traps are in your studio? 08:12 - 60sqm room. Should I split it up? 10:38 - Symmetry: how important is it? 12:44 - Can standing waves form in “leaky” rooms? 16:57 - How do soundwaves “see” curved surfaces? 18:21 - Do bass traps avoid bass getting into other rooms?
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Have you been in this situation:
You are mixing in your room, maybe with some basic treatment, and whenever you take your mixes outside of the studio, they turn out a little bit harsh, just a bit too bright?
There's just a little bit too much high end in your mixes.
Consistently with every other mix, you're just obviously boosting the high end too much.
And because you're also feeling that your room is overdamped you're wondering if the high end is just a little bit too controlled in the room.
Is that the reason why you're constantly mixing your records too bright?
And will diffusion help?
Will putting up some scattering around the room help to get that high end in check, maybe lengthen it a little bit, balance it out in a way so that your mixes don't end up so bright anymore?
Now this seems to be a logical conclusion at first glance:
Overdamped high end ► too bright mixes.
But in fact, there's a crucial thing that you're missing here, and that's what I want to talk about in this week's video.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
How does unavoidable furniture, even things like amps, guitars, bass, et cetera, affect the acoustic response of the room?
It's quite hard to say “this” does exactly “that”.
Rooms are way too unique to make that kind of assessment.
And small rooms with a lot of clutter in them get so complicated so quickly in terms of their response that it's just really hard to pick apart and understand what exactly does what.
But let me give you a general guideline to assess the actual impact of furniture and other things in your room.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Have you ever wondered if the acoustic treatment in your studio actually works, and if it does, how well?
It's kind of difficult to judge that because on one hand it's quite difficult to actually analyze your room and understand what's going on with and without the treatment.
And then what goals are correct?
As in when are you done with treatment? When have you done “enough” treatment?
Obviously one of the ways is to look at acoustic measurements. With something like Room EQ Wizard, you can fairly easily measure your room and get a whole bunch of data that tells you a lot of potentially… nothing… IF you don't know what you're looking at!
Now last week I introduced you to this new tool called Audieum by a developer from Italy, Andrea Cicero.
On one hand it lets you analyze the room modes, the standing waves in your studio, even if the room shape is pretty odd.
But then there's also a module to analyze your room with EQ Wizard measurements.
It's called IR analysis, and it basically runs through the measurements that you did at your listing position, and then spits out a report analyzing those measurements and giving you the relevant data to understand how well the room is treated, both in the time and the frequency domain, and if you've reached the goals of a good listening room.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
Last week I showed you a new online tool to calculate room modes/standing waves in odd room shapes.
It's called Audieum Model, it's super impressive, and if you missed that video you can check it out here: youtu.be/dzON4SOx_iU.
As you can imagine, it takes a little more than the basics to put something like this together.
So I asked the developer, Andrea Cicero, to hop on a call with me and explain how it works and why we haven't seen anything like this until now.
If you've been struggling to understand wtf is going on with the low end in your room, then this episode is for you.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
When was the last time you tried to figure out what is causing those nasty bass issues in your studio?
Yesterday?
Two hours ago?
Like, right now? 😛
Somehow it seems like it’s an on-going, never-ending problem..
And if you’re anything like me, you landed on one of a gazillion available “room mode calculators” sooner or later.
And also like me, you probably realized fairly quickly that it’s a rather humbling experience.
Unless your room is a rectangular bunker, their usefulness ends up being marginal. At best.
So you can understand my excitement when I got an email from Andrea Cicero, telling me that he’s developed a FEM-based room mode calculator that works in rooms of any shape.
He’s also packaged it up in an easy-to-use web based editor to make it as accessible as possible to us acoustics newbs.
Learn how to build your own professional-looking broadband bass trap that works down to 40Hz and a diffusor front that keeps your high-end lively: → acousticsinsider.com/bbt-aph-bundle
If you are into recording vocals, I’m sure the question of setting up a vocal booth has crossed your mind.
But then again maybe you’ve already done a significant amount of treatment with bass traps and panels in your room, and so you are wondering:
Is it actually worth it?
Personally, I’m not the biggest fan of vocal booths.
In essence you are trying to build a tiny room in a room. And with come ALL the problems that you’d expect from such a venture.
But ultimately there are two questions that you have to ask yourself to decide whether you need a vocal booth.
That’s what I want to walk you through in this week’s video.