Fishin KartsIf you are here from Foo The Flowerhorn's video, then thanks for stopping by! Feel free to check out my other videos and subscribe if you like them!
10 Gallon No Filter Planted Tank (Inspired By Foo The Flowerhorn)Fishin Karts2020-04-27 | If you are here from Foo The Flowerhorn's video, then thanks for stopping by! Feel free to check out my other videos and subscribe if you like them!
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!John Deere 9560r Pulling 43 Disc And PackerFishin Karts2023-12-13 | 9560r pulling a 43 foot disc with a packer behind that. Running 10th gear at 8mph.Packing Silage With A John Deere 9420Fishin Karts2023-12-09 | Here's a short video of me on the Silage mound in the pack tractor. My cousin is in the other tractor (9560r) pushing silage.1949 Leader Model D Antique Tractor Full RestorationFishin Karts2022-12-09 | This is just a short video on my 1949 Leader Model D tractor and the restoration process. It's not very detailed or anything, but I had all of the pictures and a couple of short videos so I figured I might as well upload it.Homemade Waste Oil Burner/Heater Using A Mattress Air PumpFishin Karts2022-12-05 | I'll put out a better more detailed video explaining whats going on at some point if I can get my video editor to work properly.Cheap And Easy DIY Flathead Valve Spring CompressorFishin Karts2021-03-27 | Sorry for not posting in so long. Here's a short video of a diy valve spring compressor. It took me less than five minutes to make, costed about $2, and worked perfectly.Epic Fish Feeding FootageFishin Karts2021-01-17 | I finally got around to making another video, albeit a short one. It has some cool slo-mo footage that I shot with my new phone.Feeding Goldfish to Larry, Gary, and One Eyed JoeFishin Karts2020-12-14 | I stopped at my local fish shop and bought some feeder goldfish. The rest is self explanatory I think.
My cousin does some really cool drawings. Check out his channel here: youtube.com/channel/UClyOiRDscpSnSecKAtJaMrQ50HP Go Kart in the SnowFishin Karts2020-12-07 | It snowed so I decided to get the go kart out and go for a rip.
Here's a more in depth video if you want to know more about the go kart and the engine: youtu.be/KYJZFNpouz8
Also my cousins draws some really cool stuff here's a link to his channel: youtube.com/channel/UClyOiRDscpSnSecKAtJaMrQ/featuredDHK Optimus XL Run on 3SFishin Karts2020-11-29 | It was originally 4s, but the stock batteries went bad pretty quick. So I decided to go with 3s instead because it was cheaper. I'm glad I did. It's hard to tell the difference in power even with a bigger pinion gear to make up for the lost speed.Harbor Freight Neptune Rc Boat Jet Pump Mod: Part 6Fishin Karts2020-11-20 | Here's part six! I actually took this video footage on the same day as part five, but I completely forgot about it. P.S. the remote is still working fine btw.Harbor Freight Neptune Rc Boat Jet Pump Mod: Part 5Fishin Karts2020-11-12 | In this video I make a "battery box" and two trim tabs for the harbor freight modded jet boat.Harbor Freight Neptune Rc Boat Jet Pump Mod: Part 4Fishin Karts2020-11-06 | Here's part four of the harbor freight jet boat. The steering servo issue is now fixed, but it still wants to porpoise quite a bit, so it looks like I'll have to add some trim tabs in the next video.Harbor Freight Neptune Rc Boat Jet Pump Mod: Part 3Fishin Karts2020-10-26 | Here's a follow up video to the maiden voyage servo fail in the last video. This servo is a standard size, and it should have about five or six times more power.
The servo: ebay.com/itm/223050028878?ul_noapp=trueHarbor Freight Neptune Rc Boat Jet Pump Mod: Part 2Fishin Karts2020-10-22 | Here's part two of my jet pump modded rc boat. I take the boat to the creek and give it a test run.
The jet pump: ebay.com/itm/402495460365Harbor Freight Neptune Rc Boat Jet Pump Mod: Part 1Fishin Karts2020-10-15 | In this video, I modify my Harbor Freight rc boat and put a jet pump in it.
The Jet pump: ebay.com/itm/402495460365Harbor Freight Neptune RC Boat Review + RunFishin Karts2020-10-10 | I got bored so I bought this boat with a special purpose in mind. I give the boat a short rundown, then go for a run and take a spill. I go into detail on how I will be upgrading it at the end of the video.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!FT009 And Fighter 550 Rc Boats In The CreekFishin Karts2020-09-23 | A video of me running my two rc boats in my local creek.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Larry, Gary, And Joe Update/FeedingFishin Karts2020-09-07 | Here's just a little update/feeding video of all the fish and tanks in case anybody was wondering about them
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Doing Some Basic Tank MaintenanceFishin Karts2020-07-07 | Here's just a short video of me doing some basic tank maintenance like topping off tanks tanks that lost water due to evaporation and scrubbing algae on the front glass.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Klr 650 Offroad RideFishin Karts2020-06-30 | So I finally got around to making a true offroad riding video on my klr 650, and I also dropped it while trying to cross a drainage ditch, so that was fun.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Hand Feeding My Pet Bass Some More WormsFishin Karts2020-06-18 | Sorry for not posting in a while. I recorded this about two weeks ago, and I forgot about it until I recently found it on one of my sd cards.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Do Fish Eat Snails?Fishin Karts2020-06-05 | I hadn't really thought about it before, but then I thought about it, so I decided to see if Gary would eat some small rams horn snails. Sure enough he did! I fed them to Gary since he was the one that was most likely to eat them.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!New Turn Signals For My KLR 650Fishin Karts2020-06-02 | If you watched my first klr video, then you saw me messing around with the wiring trying to get the front blinkers working, but unfortunately I couldn't get all of the leds to turn on at once, so I decided to just by new turn signals for both the front and the rear (since the back ones weren't very bright either). And boy was it worth the money. The new ones are SO much brighter than the cheap chinese ones that were on there.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!DIY Mini Indoor Pond (Adding Fish, More Plants, And a Rock)Fishin Karts2020-05-30 | Here's part 3! I'm excited to find out how the mini pond works out with live fish in it. I'll be adding some smaller rocks in the water for even more detail.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Led Light Bulb Leaking Fluid?Fishin Karts2020-05-26 | If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!KLR 650 Ride (Off Road)Fishin Karts2020-05-25 | Here's the riding video of my new klr 650.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!My New (To Me) 1987 KLR 650Fishin Karts2020-05-23 | I bought this klr about a month ago and I'm not quite sure why it took me so long to make a video about it, but here it is. I repainted all of the plastics and the tank, because the guy that owned it before me had painted all of the plastics, and he did an absolutely terrible job. You could see through the paint and there were runs everywhere. There was all kinds of dirt and junk mixed in with the paint. It felt more like 20 grit sandpaper than paint. I wet sanded the plastics down with 400 grit sandpaper, and then put about 4 coats of paint on. After that I finished it off with three coats of clear coat. The before and after pictures DO NOT do it justice at all. I should have taken the after picture in better lighting and with a better camera, but oh well. Live and learn.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!500cc 50HP Go Kart With a Motorcycle Engine Top Speed RunFishin Karts2020-05-20 | I wasn't impressed with my previous top speed run, so I decided to make another one with fresh gas (the other stuff was a couple months old) and without the tiny pod filters. The result is definitely better. I'm still slightly disappointed because I have gotten it up to 63 mph before with throttle to spare. I think maybe the clutch slips too much to hit a higher speed. I will still try it on 93 octane gas to see if that makes a difference, or if the clutch slips even more.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!DIY Mini Indoor PondFishin Karts2020-05-18 | Here's part two of the mini indoor pond series. In this one I add plants and some other aesthetics to the water fall as well as the water. I didn't have very many cutoffs from other tanks, so I will be continuing to add plants as they become available.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Large Mouth Bass Eating SalamandersFishin Karts2020-05-17 | My cousins had found a bunch of small salamanders, so we decided to feed some to Larry, Gary, and Joe.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!3 Weed Wackers For $20. Deal or No Deal?Fishin Karts2020-05-15 | I bought two weed wackers for $20 (the third one was free). Two of them didn't run. Unfortunately, I was only able to get one running, because the carb on one wasn't working right. I'd still say deal, because I should be able to almost triple my money off of them, even though I had to buy a new carb for one of them.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Drill Battery In Rc Car (Part 3)Fishin Karts2020-05-13 | I decided to make a video of all the run times with the different sized drill batteries. The results aren't all that impressive, but they aren't disappointing either.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Mini Aquaponics System UpdateFishin Karts2020-05-12 | I hadn't though about it for a while, but all of a sudden I realized that I hadn't done an update on the mini aquaponic system since I posted the first video on it, so here it is.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!DIY Mini Indoor PondFishin Karts2020-05-11 | I started this project a few weeks ago and I just haven't gotten around to posting it yet. The next video will include adding aquatic and semi aquatic plants and also some details to the water fall.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Hand Feeding My Pet BassFishin Karts2020-05-09 | I went out and caught some smaller worms to feed to the fish. This video includes some epic hand feeding footage.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!$15 For Two Mowers. Deal or No Deal?Fishin Karts2020-05-08 | I was bored so I found these two mowers on facebook marketplace, and I bought them for $15. One was locked up, and the other had a really gummed up carb. As it turns out, I was able to get them both running great, so deal!
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Drill Battery In Rc Car (Part 2)Fishin Karts2020-05-06 | Here's the second installment of the drill battery powered rc car series. In this video I take the rc for a run, and so far it's working far better than I had ever hoped for.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Drill Battery In Rc Car (Part 1)Fishin Karts2020-05-05 | I've been wanting to try this for a long time now, and with the whole corona virus thing going on, I finally have enough time to. This is just a video explaining what it is that I'm trying to accomplish, and testing the electronics with the battery to make sure nothing goes up in smoke as soon as I plug it in.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Turnigy Trooper SCT BashFishin Karts2020-05-03 | I finally got around to making a running video of the trooper. I had a few problems along the way, but overall it was a success.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Attempting to Catch Lunkers in a Small Creek (And Failing)Fishin Karts2020-05-01 | It finally stopped raining long enough for the water level in the creek to go down enough to do a little bit of fishing. Believe it or not, I actually caught about a 3lb smallmouth before I decided to strap the go pro on. I was hoping to catch a decent smallmouth on camera, but unfortunately all I caught was a tiny largy.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Redcat Volcano EPX Aluminum Chassis UpgradeFishin Karts2020-04-29 | An aluminum chassis for my redcat volcano arrived in the mail a couple of days ago, so I made a quick rebuild video on it.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Gary The Green Sunfish Trying to Eat a Goldfish!Fishin Karts2020-04-24 | Basically Gary chasing a goldfish around his tank and attempting to eat it. He didn't quite succeed. I just fed the goldfish to Larry in the end.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Broken Turnigy Trooper SCT 4x4Fishin Karts2020-04-21 | I was going to make the Trooper running video on 3s, but it didn't last long. I will make an actual running video once I get a new pinion gear.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Turnigy Trooper 4x4 SCT Overview + Battery Box ModFishin Karts2020-04-20 | I bought this Turnigy trooper short course truck from my cousin for $50. It was a great deal. The only catch is that he wanted me to think about going hunting with him. I wanted to run a 3s in it, but it didn't fit, so I make some minor modifications to the battery box to make my 3s batteries fit.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Doing Some Maintenance On the 10 Gallon Planted TanksFishin Karts2020-04-19 | I felt like making a video and the planted tanks were do for water changes anyways. The water in the botton one was even a bit green.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!Feeding the Fish a Bunch of Different ThingsFishin Karts2020-04-15 | Another feeding video comprised of a bunch of clips that I took over the past couple of weeks. A spider attaches itself to Gary like one of the face suckers from Alien.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out.Brushless Redcat Volcano EPX BashFishin Karts2020-04-14 | A bashing/breaking video of my Redcat Volcano EPX that I showed in my rc collection video. It was originally brushed, but I upgraded it to brushless right after I got it.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!OP Paper and Cardboard ShredderFishin Karts2020-04-12 | A follow up video showing the main reason why I bought the "Skilsaw" drill. It worked out way better than I could have hoped for. It was also way cheaper than buying a paper shredder that is capable of shredding cardboard. Not to mention that this particular shredder is a cross cut, so the shredded pieces are much smaller than a straight cut shredder, which is probably what I would have bought because they tend to be cheaper than the cross cut ones.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out.Skil 7.0 Amp 6335 Corded Drill Review + TestFishin Karts2020-04-11 | I bought this drill from Lowes for $24, and it seemed like a good deal, so I decided to make a little review video on it.
If you like, comment, and watch most of the video, it makes Youtube more likely to recommend my videos to other people, so it really does help out!