Dead Air® Sandman S vs DUAL-LOK™ HRT-762™ | Sound Testing Overview Griffin Armament 2026-09-18 | Dead Air® Sandman S vs DUAL-LOK™ HRT-762™ | Sound Testing Overview
Introduction to Griffin Armaments Silencer Testing Standard™ Griffin Armament 2022-12-07 | Griffin Armament has researched and implemented a new sound suppressor testing standard to better enable consumers with dosing data. For previous decades, the standard has been to only show PEAK impulse decibel data.When Griffin asked how to show this data, Hottinger Brüel & Kjær (leading audiology metrology provider) suggested researching the US Army Development Command's Army Research Laboratory AHAAH (Auditory Hazard Assessment Algorithm for Humans), as this is a supported function in the HBK PULSE LabShop software.Griffin's new data continues to show peak decibel data, as that is the loudest part of the waveform, but also shows more details that will be of interest to consumers for years to come. This data includes:• Peak dB sound pressure level reading.• LAeq A-weighted Equivalent Continuous Sound Pressure Level (average A weighted dB sound pressure for the waveform over the defined time in milliseconds).• Leq Unweighted Equivalent Continuous Sound Pressure Level (average unweighted dB sound pressure for the waveform over the defined time in milliseconds).• Number of exposures with no protector worn, "warned" (how many gun shots would be safe to fire or be in the immediate vicinity of, daily and weekly, for an anticipating observer) applying to 95% of the exposed population.• Source document of waveform graphic and table.• Descriptive summary of testing.Resources:https://www.arl.army.mil/resources/ahaah/bksv.com/en/about/historyTimecodes0:00 - Intro0:18 - Hardware History4:00 - Peak Data History6:20 - Scientist Factory Tech Setup7:59 - Noise Dosing & Customer Satisfaction10:59 - AHAAH Overview12:25 - Waveform Practical Demonstration17:33 - Software Recap18:11 - Hearing Protection Importance19:29 - Noise Dosing Recap20:16 - SummaryFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #testing #guns #GriffinArmament #GriffinArmy
Quick Tips: Selecting the Right Ammo Griffin Armament 2022-11-28 | Mitch and Jack from Griffin Armament discuss the different types of ammo selection categories. Jack elaborates on his time as a police officer and discusses what types of defensive rounds work best for training versus live action. Likewise, Mitch talks of his time working on a hunting ranch and mentions the differences between match grade and hunting ammo.Timecodes0:00 - Intro0:16 - Types of Ammo0:31 - Training Ammo1:08 - Defensive Ammo1:46 - Match Grade Ammo2:12 - Hunting Ammo2:53 - OutroFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentCheck out our website: www.GriffinArmament.com#firearms #guns #quicktips #GriffinArmament #GriffinArmy
POI Shift Comparison | M40A5 Surefire® FA762SS | DUAL-LOK PSR7 | MK12 Mod H AEM5 | MK1 DUAL-LOK PSR5 Griffin Armament 2022-11-23 | This was a POI shift test of market over the barrel suppressors. The Griffin Armament® DUAL-LOK™ PSR™ 7 was tested on a PWS 2112 built M40A5. The Surefire® FA762SS was also tested on the same rifle. The M40A5 sight used for testing was a NSN/1240-01-533-1854 Schmidt and Bender 3-12x50 GenII Mildot MTC set at 12 power magnification. Ammunition used was federal 168 gr Gold Medal Match sold through the CMP program. This performance was compared to the same rifle firing the Surefire® FA762SS.Accuracy unsuppressed for the M40A5 with the DUAL-LOK™ mount was .935 MOA. Accuracy suppressed with the PSR™ 7 mounted was .221 MOA. POI shift was .460 MOA Up and zero MOA windage. Accuracy for the unsuppressed M40A5 was .452 MOA. Accuracy suppressed with the Surefire® FA762SS was .349. POI shift for the Surefire® FA762SS was .692 MOA Left and .050 MOA Down.We also compared Griffin's DUAL-LOK™ PSR™ 5 which was tested on a Griffin Armament® 16" MK1 rifle built with a 12.5" suppressor ready rail. This was compared to an Ops Inc 12th model / Allen Engineering® AEM5 on a Precision Reflex Inc PRI MK12 Mod H (Holland), which is a 16" barreled special purpose rifle. Both 5.56 rifles were fired using Leupold's 2.5–8×36 mm TS-30 MK4 MRT optics with magnification set at 8 power. Ammunition used was circa 2015 55 gr Ruag sold under the prime label.Accuracy unsuppressed for the MK1 5.56mm rifle with DUAL-LOK™ mount was .543 MOA. Accuracy suppressed with the Griffin PSR5 mounted was .492 MOA. POI shift was .67 MOA Left and .460 MOA Down. Accuracy for the unsuppressed MK12 Mod H was .581MOA. Accuracy suppressed with the Allen Engineering® AEM5 was 1.069 MOA. POI shift for the Allen Engineering® AEM5 was .05 MOA Right and .420 MOA Up.POI shift was compared to unsuppressed POI using 3 shot groups at 100 yards.Timecodes0:00 - Intro1:03 - Shooting Selections1:47 - M40A51:59 - PSR 72:22 - FA762SS3:06 - Griffin MK13:13 - PSR 53:28 - MK12 Mod H3:38 - AEM54:00 - POI Shift Conclusion10:58 - OutroTo view all DUAL-LOK™ suppressors:griffinarmament.com/silencers/rifle-silencers/dual-lokFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament*All of the suppressors, in our opinion, performed excellently in this test. "Surefire" and "FA762SS" are federally registered trademarks of Surefire, LLC and is of many trademarks owned by Surefire, LLC. "Allen Engineering" and "AEM5" are federally registered trademarks of Allen Engineering and is of many trademarks owned by Allen Engineering. Griffin Armament® is an independent manufacturer that is in no way affiliated with or endorsed by Surefire LLC, or Allen Engineering.#silencer #shooting #guns #GriffinArmament #GriffinArmy
SIG SAUER® SLX556-QD vs DUAL-LOK™ 5 | Sound Testing Overview Griffin Armament 2022-11-19 | Griffin Armament® puts the Sig Sauer® SLX556-QD up against the Griffin DUAL-LOK™ 5 suppressor. This test was conducted using the Bruel & Kjaer Pulse, lab grade sound meter.Timecodes0:00 - Intro0:11 - Specifications0:35 - Flash Testing Photos0:42 - Sound Testing Overview3:21 - Conclusion"Sig Sauer" and "SLX556-QD" are federally registered trademarks of Sig Sauer Inc, and is of many trademarks owned by Sig Sauer Inc. Griffin Armament® is an independent manufacturer that is in no way affiliated with or endorsed by Sig Sauer Inc. The demonstration of the Sig Sauer® SLX556-QD is merely used for comparisons of the Griffin DUAL-LOK™ 5 suppressor.Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
DUAL-LOK™ PSR™ Suppressor Tutorial Griffin Armament 2022-10-27 | In this video we cover the DUAL-LOK™ PSR™ 5 & 7 suppressors from Griffin ArmamentFor more information on the DUAL-LOK™ PSR™ Suppressors visit:griffinarmament.com/dual-lok-psr-otb-5-silencer-5-56mmgriffinarmament.com/dual-lok-psr-otb-7-silencer-7-62mm-1-- Check out the Dwell Time Podcast --griffinarmament.com/info/media/dwell-time-podcast-- DUAL-LOK™ 5 & 7 Suppressor Tutorial --youtube.com/watch?v=VIHAwFLMxSA&t=460s-- DUAL-LOK™ HRT-556™ Suppressor Tutorial --youtube.com/watch?v=eU7BPFNZDFATimecodes0:00 - Intro1:24 - Suppressor Overview2:43 - Specifications4:50 - Mounting System Overview6:43 - Muzzle Device Options7:43 - Mounting System Demonstration10:43 - Cleaning Overview12:51 - Maintenance & Service Life14:40 - Gunsmithing Considerations16:48 - OutroFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Griffin Armament DUAL-LOK™ PSR™ Suppressors Griffin Armament 2022-10-26 | INTRODUCING THE DUAL-LOK™ PSR™ 5 & 7 SUPPRESSORSReflex Suppressors, or Over the Barrel Suppressors have been manufactured for quite some time, but recently haven’t been the focus by mainstream manufacturers. Griffin Armament first made OTB suppressors over ten years ago with the introduction of the RSTA and SPR models. Meant to diminish blow back, provide superlative accuracy, excellent POI shift characteristics and add minimal system length, these suppressors were highly desirable among suppressor aficionados. Griffin is reintroducing next generation over the barrel suppressors with the DUAL-LOK™ PSR™ suppressor series.*AVAILABLE FOR CONSUMERS 11/16/22*For more information on the DUAL-LOK™ PSR™ Suppressors visit:griffinarmament.com/dual-lok-psr-otb-5-silencer-5-56mmgriffinarmament.com/dual-lok-psr-otb-7-silencer-7-62mm-1Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament*DISCLAIMER*This product is marketed and intended specifically for government professional sharp shooter communities. Examples: Military Branches, Agencies, Law Enforcement, etc.This video is fictional and depicts a fictional activity for entertainment purposes only. No one was harmed in the making of this video. Prop guns were used in this production - no real firearms were used in the making of this video. Designed and manufactured by snipers#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Quick Tips: How Often Should You Clean a Gun? Griffin Armament 2022-10-10 | Evan and Mitch from Griffin Armament discuss how often a variety of firearms should be cleaned in order to maintain quality. Evan elaborates on how some shooters prefer to run their barrels more dirty than others, and how these tips and tricks can assist in finding what best works for your style.Timecodes0:00 - Intro0:16 - Cleaning Pistols0:37 - Cleaning Rifles1:11 - Cleaning Bolt Action2:00 - What to Look For2:22 - Benefits to Keeping a Dirty Barrel2:57 - How Often to Clean Your Firearms3:25 - Choosing a Firearm Lubricant4:17 - OutroFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentCheck out our website: www.GriffinArmament.com#firearms #guns #quicktips #GriffinArmament #GriffinArmy
Milspec Mojo Demos the DUAL-LOK™ HRT-556™ Suppressor Griffin Armament 2022-09-26 | #shorts #silencer #guns
DUAL-LOK™ HRT-556™ Suppressor Tutorial Griffin Armament 2022-09-26 | In this video we cover the DUAL-LOK™ HRT-556™ from Griffin Armament-- Check out the HRT-556™ Podcast Episode --five.libsyn.com/episodes/view/24292482-- HRT-556™ SPL & Flash Testing --youtube.com/watch?v=mxLrkdr3eis&t=54sTimecodes0:00 - Intro1:00 - Specifications & Overview2:16 - Features & Mounting System5:35 - Mounting Demonstration8:05 - Maintenance & Service Life8:44 - Cleaning Overview10:06 - Durability11:16 - Muzzle Device Options12:47 - OutroFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentFor more information on the DUAL-LOK™ HRT-556™ visit:griffinarmament.com/dual-lok-hrt-556-22-cal#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Griffin Armament Recruitment Video Griffin Armament 2022-08-30 | The Griffin Army is expanding! If you're a Wisconsin local resident or willing to relocate for a well paying job, full benefits, and 401k matching, don't hesitate to reach out.Join our winning team! Email us:marketing@griffinarmament.comGriffin Armament Employment page:griffinarmament.com/contact-us/employmentFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Griffin Armament DUAL-LOK™ HRT-556™ Suppressor Griffin Armament 2022-08-30 | INTRODUCING THE DUAL-LOK™ HRT-556™ SUPPRESSORInitially designed for elite HRT unit’s, Griffin Armament’s HRT-556™ model is the shortest addition to the DUAL-LOK™ family of suppressors which has, to this point, not been available to the general public. Griffin utilized the new DUAL-LOK™ active retention system with this suppressor, an often demanded feature by government customers. This combined with generations of R&D brought a compact, highly durable, low flash, and top performing suppressor to market for government customers. Griffin is now releasing it to the commercial market.For more information on the DUAL-LOK™ Suppressors visit:www.griffinarmament.com/silencers/rifle-silencers/dual-lokFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Make Your Neighbor Jealous With This Suppressor Griffin Armament 2022-08-01 | #shorts #silencer #guns
Sounds of Silence: DUAL-LOK™ 5 & 7 Griffin Armament 2022-07-21 | Raw, natural resonance. That's how we describe our Sounds of Silence. Griffin Armament's suppressor performance is superior in the market space and next to none when immersed with nature's elements. Free of disruption, the DUAL-LOK™ blends effortlessly with the unfiltered landscape of Midwestern America. Just hear it for yourself.Griffin utilizes cutting edge CAD design, industry leading tooling and machining practices, and integration of laser welding to provide ideal construction to the tubeless DUAL-LOK™ suppressors.Substantial efforts are taken in the manufacturing and inspection of the DUAL-LOK™ products to ensure Griffin customers are outfitted with some of the best suppressor systems in the world. Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentFor more information on the DUAL-LOK™ 5 & 7 visit:www.griffinarmament.com/silencers/rifle-silencers/dual-lok#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
DUAL-LOK™ 5 Durability Testing Griffin Armament 2022-07-19 | This was a stress / durability test of the DUAL-LOK™ 5 suppressor. The standard was 4, 28 round magazines on full auto, followed by 28 rounds/ minute sustained for 13 magazines. The suppressor survived the test, and sound tested actually 1db quieter after the test than when it was new (before the test). This test was very hard on both the firearms and the suppressor. When firearms are run this hard there is a high probability for failures to feed or eject. We cleared the jams as quickly as possible without exposing ourselves to undue harm from cook offs. Under normal use, glowing in daylight should be avoided. This extreme temperature will degrade the product very quickly and is considered abusive.We do not recommend users do this testing on their own. It is dangerous to yourself and others to operate the suppressor and firearm at more than two magazines of full auto, followed by 15 rounds per minute sustained (which is equal to the sustained rate of fire for the M4A1 carbine). Our conservative recommendations have always positioned users in a place where they should expect long service life of the product measured in tens of thousands of rounds. It is not uncommon for our suppressors to last over 50,000 rounds with end users in the field. Rest assured though, your product is covered by the Griffin Perpetual Lifetime Warranty. Historically we have serviced about 1% of all Griffin products for either return or repair for whatever reason. Your product is supported by one of the longest lasting family owned brands in the suppressor market segment. Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentFor more information on the DUAL-LOK™ 5 & 7 visit:www.griffinarmament.com/silencers/rifle-silencers/dual-lok#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Griffin Armament DUAL-LOK™ 5 & 7 Suppressors Griffin Armament 2022-07-13 | INTRODUCING THE DUAL-LOK™ 5 & 7 SUPPRESSORSGriffin Armament's DUAL-LOK™ mounting system provides the most secure attachment to the host firearm available in today's market because of not 1, but 2 locking mechanisms (forward taper and redundant locking collar). A tubeless design keeps the weight of these suppressors to a minimum while the 17-4 stainless steel H900 & 718 Inconel construction compromises nothing when it comes to durability. ECO-FLOW™ baffle technology accompanied by our new flow optimized flash reducing end cap design keeps sound pressure levels and flash signature exceptionally low.Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentFor more information on the DUAL-LOK™ Suppressors visit:www.griffinarmament.com/silencers/rifle-silencers/dual-lok#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
DUAL-LOK™ 5 & 7 Suppressor Tutorial Griffin Armament 2022-07-13 | In this video we cover the DUAL-LOK™ 5 & 7 from Griffin ArmamentTimecodes0:00 - Intro3:06 - Mounting System Overview8:16 - Mounting Demonstration10:20 - Maintenance13:05 - General Extra Info15:15 - Muzzle Device OptionsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmamentFor more information on the DUAL-LOK™ 5 & 7 visit:www.griffinarmament.com/silencers/rifle-silencers/dual-lok#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Dead Air® SIERRA-5 | DUAL-LOK™ HRT-556™ | EXPLORR® .224 | Sound Testing Overview Griffin Armament 2022-06-28 | Griffin Armament puts the Dead Air SIERRA-5 up against the Griffin DUAL-LOK HRT-556 and EXPLORR .224 suppressors. This test was conducted using the Bruel & Kjaer Pulse, lab grade sound meter.*Our EXPLORR .224 has a body length of 6.0" without the DUAL-LOK mount and 6.5" when mounted.Timecodes0:00 - Intro0:15 - Specifications0:47 - Flash Testing Photos1:00 - Sound Testing Overview5:23 - Conclusion"Dead Air" and "SIERRA-5" are federally registered trademarks of Sound Moderation Technologies, LLC and is of many trademarks owned by Sound Moderation Technologies, LLC. Griffin Armament® is an independent manufacturer that is in no way affiliated with or endorsed by Sound Moderation Technologies, LLC. The demonstration of the Dead Air® SIERRA-5 is merely used for comparisons of the Griffin DUAL-LOK™ HRT-556™ and EXPLORR® .224 suppressors.Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Griffin Mounting Systems for 1.375x24 Sound Suppressors Griffin Armament 2022-04-29 | In this video we cover 1.375x24 mounting systems from Griffin ArmamentTimecodes0:00 - Intro1:08 - Suppressor Product Overview1:41 - CAM-LOK® 5:34 - EZ-LOK™ 8:35 - 3-LUG12:40 - A2 Mount16:03 - DUAL-LOK™ 21:00 - Taper Mount 25:18 - Direct ThreadFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Bushwhacker® 36 Tutorial Griffin Armament 2022-04-07 | In this video we go through the ins and outs of the Bushwhacker 36 in detail. This is a .36 CAL universal suppressor that you can run on pistols and rifles. For more information go to griffinarmament.com/bushwhacker-36-universal-silencerFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Bushwhacker® 36 Sound Testing Overview Griffin Armament 2022-03-04 | Griffin Armament puts the Bushwhacker 36 through the paces in this exciting sound testing video. This test was conducted using the Bruel & Kjaer Pulse, lab grade sound meter.For more information on this and other incredible Griffin products, visit:www.GriffinArmament.comFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
CAM-LOK® VS EZ-LOK™ VS Direct Thread Pistons Griffin Armament 2022-01-13 | In this video, we discuss the revolutionary engineering products CAM-LOK® and EZ-LOK™ and how they compare with the direct thread pistons from the days of yesteryear. For more information visit GriffinArmament.comFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
EXPLORR® .224 Sound Testing Overview Griffin Armament 2021-12-23 | Griffin Armament puts the new EXPLORR .224 Taper Mount sound suppressor up against a SIG SRD556-QD 5.56mm can from SIG SAUER®. Stay tuned to see how it measures up in A-weighted muzzle and ear sound. This test was conducted using the Bruel & Kjaer Pulse, lab grade sound meter.Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
EXPLORR® .300 Sound Testing Overview Griffin Armament 2021-12-23 | Our EXPLORR .300 takes on the Dead Air® Nomad-30. Check out how our smaller, lighter, more durable can stacks up! This test was conducted using the Bruel & Kjaer Pulse, lab grade sound meter.Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Hi-Standard Historical Sound Testing Overview Griffin Armament 2021-12-15 | We love firearms and history here at Griffin Armament and have quite the growing collection. This is the first video in a series of sound testing historical firearms. Enjoy!Follow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
RECCE 5™ MOD 4 Sound Testing Overview Griffin Armament 2021-12-08 | Griffin Armament's new laser welded Recce 5 Mod 4 with Eco-Flow baffles is tested against the Advanced Armament M4-2000 Mod 09 (latest M4-2000) sound suppressor. For more information visit:griffinarmament.com/recce-5-silencerFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
PALADIN® 5 HD Sound Testing Overview Griffin Armament 2021-11-03 | See how the PALADIN 5 HD stacks up against OSS's HX-QD 556 can.For more information visit:www.griffinarmament.com/paladin-5-hd-suppressorFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
PALADIN® HD .300 Sound Testing Overview Griffin Armament 2021-11-03 | We put the PALADIN HD .300 up against OSS's HX-QD 762 to see who comes out on top!For more information visit:www.griffinarmament.com/paladin-hd-300-silencerFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Griffin Armament: PALADIN® HD Griffin Armament 2021-10-18 | The PALADIN® HD .300 silencer takes the Recce 7's market leading attributes and Patented ECO-FLOW™ baffle system and adds new to market features. The PALADIN® HD features a 17-4 stainless steel tube body and baffle stack allowing the suppressor to be rated up to 300 Remington Ultra Magnum suppressor and weighs less than most market 5.56mm offerings. The Ratchet-lok™ front cap and keyed together baffles allow the PALADIN® to be disassembled by the end user for cleaning and ease of service. Traditionally welded construction allowed the greatest confidence because serviceable suppressors were comprised of multiple components that could loosen. The PALADIN® active locking front cap removes this concern and allows end users to remove copper and lead deposits which rob volume and add parasitic weight to centerfire suppressors over time. This allows lead bullets and rimfire use without concerns of damage to the suppressor. Key Points - Price and Inclusions:• PALADIN 5 HD - $945, PALADIN 300 HD - $1045• Taper Mount EZ Brake™• Full 17-4 H900 Heat treated stainless steel• ECO-FLOW™ baffle system provides market leading suppression• Nitride finishSpecs:• 1.5” diameter - 6.3”-7.6"• 12.5oz - 14.5oz weight • Check website for ratingsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Demo Shoot with Silencer Shop Griffin Armament 2021-10-11 | Evan, Chris and Brooke took a trip down to Silencer Shop HQ to give a demo shoot of our current products and maybe some up and coming,Thank you to Silencer Shop for hosting us.Visit: www.GriffinArmament.comFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencershop #suppressor #shooting #GriffinArmament #GriffinArmy
GP-N™ Sound Testing Overview Griffin Armament 2021-10-06 | This video compares the GP-N™ to the Gemtech Halo on different barrel lengths. For more information on this and other suppressors, visit:www.GriffinArmament.comgriffinarmament.com/silencers/rifle-silencers/gp-nato-a2-attachable-silencersFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
Griffin Armament - RECCE™ Series Suppressors Griffin Armament 2021-08-26 | The long standing staple in the suppressor market finally gets its own video. The 1st generation Recce suppressors were debuted in 2012 with the purpose of providing compact, durable, accurate, rifle specific suppressors to the market. These suppressors have received continued technology enhancements and revisions over the years to keep them at the tip of the spear in the suppressor market. The current version is the Recce 5 (MOD 4) which is our lightest weight, highest performing suppressor yet. Key Points - Price and Inclusions:• RECCE 5 - $695, RECCE 7 - $820• Taper Mount EZ Brake™• Full 17-4 H900 Heat treated stainless steel• ECO-FLOW™ baffle system provides market leading suppression• Cerakote Finish resists heat and abrasion Specs:• 1.5” diameter - 6.3”-7.6"• 14.5oz - 17.5oz weight • Check website for ratingsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
GP5 & 7 Installation Guide Griffin Armament 2021-05-28 | Hey Mr. Gunsmith! Today Evan walks us through the proper way to install the GP5 & 7 and provides important information on pinning and welding your suppressor.Suppressor Alignment Check Rod video:youtube.com/watch?v=UwIBvQyKFNc&t=2sFor more information please visit:griffinarmament.com/silencers/rifle-silencers/gp-direct-thread-silencersFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
SPRM™² RINGS Installation Guide Griffin Armament 2021-05-06 | Today we talk about the proper way to mount a scope using our new rings and the importance of setting your scope up correctly. For more information regarding the product visit:griffinarmament.com/optics-mounts/scope-ringsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Griffin Armament - SPRM™² RINGS Griffin Armament 2021-04-30 | Griffin’s SPRM™ rings feature a unique utility patented design that splits the rings on two parallel but offset planes, allowing for the integration of Accessory Interface Suite (AIS™) products on 5 mounting surfaces. This system affords mounting opportunities on both left and right sides, 45-degree mounting surfaces on either side, as well as the top mounting surface to be used for accessory interfaces. Griffin SPRM™ rings deliver unsurpassed flexibility and utility to the discriminating user. Left-handed or right-handed shooters are equally supported with the SPRM™ mounts and accessories.SPRM™ Features:• AIS™ (Accessory Interface Suite) allowing the user to mount accessories on 5 sides of the mount body• RTO™ (Rapid Transition Optic) accessory support - ability to mount Rapid Transition Optic plates to the system for a 40° offset to the primary optic, maintaining identical optical centerline height• Ambidextrous support• Individually probed during the manufacturing process for peerless dimensional consistency• Stanag 4694 Compliant attachment, for precise return to zero• Utility patent pending to support future technology development in the electro-optics industry• Backed by Griffin’s Perpetual™ Lifetime WarrantySPRM™ Specs:• 6061 T6 aluminum• Type 3 milspec hardcoat anodizing• 12 (qty), 8-40 T15 fasteners for ring clamping• 4 (qty), 10-32 fiber lock patched T15 fasteners for rail clampingFor more information visit:griffinarmament.com/optics-mounts/scope-ringsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
SR-RIGID™ Installation Guide Griffin Armament 2021-04-19 | Evan demonstrates the proper way to install the SR-RIGID™ Rail and talks a bit about the design objectives of our newest product.For more information visit:griffinarmament.com/ar15-firearms-parts/ar15-rail-systemsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Griffin Armament - SR-RIGID™ RAILS Griffin Armament 2021-04-16 | Griffin Armament® M-LOK compatible SR-RIGID™ rails (Suppressor Ready - Rigid) allow up to 1.5” outside diameter silencers to be mounted inside the octagonal M-LOK rail. This provides suppressor aficionados a sleek, and compact overall length to AR15 type firearms. Key points - price and inclusions: • MSRP from $169.95 • Available Lengths 15”, 13.5”, 12.5”, 11.5”, 10.5”, 9.5”, 7.5” • 7 sides of M-LOK interfaces• Contiguous 1913 Picatinny top rail• Low profile, user friendly, clamp installation design• Multi-Function Griffin Armorers wrench included• 6061-T6, Type 3 hardcoat anodized SR-Rigid™ Rail• 7075, T-6, Type 3 hardcoat anodized, aluminum barrel nut • 45 degree Picatinny QD swivel mount includedFor more information visit:griffinarmament.com/ar15-firearms-parts/ar15-rail-systemsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
GP-Nato Installation Guide Griffin Armament 2021-03-26 | Evan demonstrates how to install and provides maintenance information for the GP-Nato, a dedicated 5.56mm suppressor from Griffin Armament.For more information visit:griffinarmament.comFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #techtips #GriffinArmament #GriffinArmy
Griffin Armament - GP-Nato 5.56mm Suppressor Griffin Armament 2021-03-26 | Griffin’s GP-NATO™ suppressor is a robust, dedicated 5.56mm suppressor which provides secure fitment to common A2 compensator. The A2 compensator is a familiar muzzle device to nearly all AR15 rifle owners. This simple, inexpensive, yet effective compensator has served the military for decades. The Griffin GP-NATO™ was designed to bring modern suppressor technology to the A2 mountable class of silencers which started in the late 90’s with the Gemtech® Halo. Key Points - Price and Inclusions:• $745.00 MSRP• A2 Collar Mount machined into tube body for ultimate strength and precision• ½” shim set included • Wrenches included• Full 17-4 H900 Heat treated stainless steel• ECO-FLOW™ baffle system provides market leading suppression• Cerakote Finish resists heat and abrasion • Fits most 22mm NATO A1/A2 flash hider & Griffin’s Gate-LOK Hammer CompSpecs:• 1.5” diameter - 6.5”length• 16oz weight including mount collar and shims• Rated for all .22 caliber cartridges • Full Auto Rated for 5.56mm down to 7.5”For more information visit: griffinarmament.com/silencers/rifle-silencers/gp-nato-a2-attachable-silencersFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#silencer #suppressor #shooting #GriffinArmament #GriffinArmy
LOW-PRO-RIGID™ Rails (Gen 2) Installation Guide Griffin Armament 2021-03-25 | In this video Evan demonstrates how to install our LOW-PRO-RIGID Rails. We provide a general overview of the product and a show a detailed installation with the recommended torque specifications.For more information, please visit our website:griffinarmament.com/ar15-firearms-parts/ar15-rail-systemsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#guns #rails #techtips #GriffinArmament #GriffinArmy
Griffin Armament - LOW-PRO-RIGID™ Rails (Gen 2) Griffin Armament 2021-03-25 | The Griffin Armament® M-LOK compatible LOW-PRO-RIGID Rails have been re-engineered to offer a user friendly installation while continuing to provide a slim, low profile, ultralight yet rigid hand-guard that past users have loved.Key Points - Price and Inclusions:- MSRP from $174.95- Current available lengths: 15', 13.5", 10.5" and 8.6". Lengths coming soon: 12.5", 9.5" and 7.5"- Multi-Function Armorers wrench included- 6061-T6 Hardcoat Anodized LOW-PRO-RIGID Rail- 17-4 Stainless steel H900 heat treated barrel nut- 45° Picatinny QD swivel mountFor more information visit griffinarmament.com/ar15-firearms-parts/ar15-rail-systemsFollow us on Instagram: @griffin_armamentFollow us on Facebook: @griffinarmament#guns #rails #shooting #GriffinArmament #GriffinArmy
