InfinityFlow3D
Infinity Flow S1 Kickstarter Launch!!!
updated
We don't do much multicolor printing. Our goal is to keep printers running for as long as possible with as little intervention as possible.
That's why we built the S1+.
We can run large 5kg spools, automatically swap to the next roll when one runs out, and use up partial rolls without standing around waiting for filament changes.
It's just a different tool built for a different job.
#3DPrinting #PrintFarm #BambuLab #Filament #Automation #Engineering #Manufacturing #Maker #InfinityFlow3D
Normally, once it disappears into the printer, you’re either there to swap the spool… or you’re hoping the print can wait.
With the S1+, it just loads the next spool and keeps going.
The end of the spool isn’t the end of the story.
#3DPrinting #3DPrinter #Filament #PrintFarm #AdditiveManufacturing
Nothing did.
The S1+ automatically loaded the next spool and the printer just kept going like nothing happened.
Honestly, that’s exactly how it should be.
#3DPrinting #3DPrinter #InfinityFlow3D #Prusa #PrintFarm #Filament #AdditiveManufacturing
#3DPrinting #PrintFarm #Filament #FDMPrinting #AdditiveManufacturing
#3DPrinting #PrintFarm #AdditiveManufacturing #FDMPrinting #3DPrinter
The two biggest things are making sure you have a solid Bowden connection and a smooth filament path to the print head without any sharp bends or kinks.
#3DPrinting #BambuLab #P1S #PrintFarm #Engineering #Maker #Filament #Automation
#3dprintinglife #bambu #additivemanufacturing #prototyping
• Smooth PEI for ASA (cleanest surface finish)
• Bambu Textured PEI for PLA (extra grip for tall parts)
• Cool Plate for ultra-sticky adhesion
• Engineering Plate for CF & technical filaments
#3dprinting #printfarm #bambulab #3dprinter #engineering
#3dprinting #printfarm #bambulab #3dprinter #engineering #maker
Literally built an auto-cutter to solve this exact issue and forgot to put one on this machine. Lesson learned, installed one right away.
#3dprintinglife #bambu #additivemanufacturing #prototyping #tech
Working on a FlowQ feature to alert you when the entire farm drops offline so you can catch it in time. Would you want that notification, or just take the gamble?
#3dprint #prototyping #manufacturing #tech #hardware
#3dprinting #maker #3dprinter #printfarm #3dprintinglife
#3DPrinting #PrintFarm #ASA #Engineering #Manufacturing #Maker #Workshop #AdditiveManufacturing #3DPrinter
Tying the tops together with a few sacrificial bridges kept everything locked in place while dropping the hardware in. Snaps off clean and completely fixed the issue.
#3dprinting #engineering #prototyping #bambulab #productdesign #maker
#3DPrinting #PrintFarm #Automation #3DPrintFail #Maker #Engineering #BehindTheScenes #Manufacturing #Prototype #Tech
#3dprinting #printfarm #3dprintingtips #filament #printfail #fdm
If a spool runs out overnight and sits for hours, the plastic cools, the layers contract, and you wake up to a split print—even without a single error code on screen.
#3dprinting #printfarm #bambulab #manufacturing #3dprinted
#3dprinting #asa #hips #supportmaterial #3dprintingtips #printfarm
#3dprinting #s1plus #filament #printfarm #bambulab #automation
#3dprinting #printfarm #bambulab #automation #manufacturing
#3dprinting #printfarm #flowq #automation #bambulab #manufacturing
#3dprinting #printfarm #automation #bambulab #flowq #manufacturing
#3dprinting #printfarm #automation #bambulab #manufacturing #3dprintfarm
#3dprinting #filament #printfarm #3dprintingtips #bambulab
#3dprinting #printfarm #filament #3dprintingtips #bambulab #automation
#3dprinting #bambulab #bambustudio #printfarm #automation #manufacturing
#3dprinting #printfarm #bambulab #automation #manufacturing #downtime
#3dprinting #pain
#3dprinting #printfarm #bambulab #automation #manufacturing
#3dprinting #printfarm #behindthescenes
#3dprinting #s1plus #printfarm #filament #bambulab #automation
#3dprinting #printfarm #bambulab #automation #manufacturing #productivity
It’s the chaos that comes with growth.
You can keep adding machines, but if files are scattered everywhere and jobs are slipping through the cracks, you’re just scaling the mess.
That’s exactly why we built FlowQ. One dashboard. One queue. Every printer. Everything organized in one place so your farm can keep moving without the constant management overhead.
The goal isn’t more printers. It’s making the printers you already have easier to run.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
Instead of stopping the print. Heating up. Purging. Loading and restarting the printer, we just use the S1+ automatic filament reloader.
Just throw another roll on there and you are good to go. It only takes a few seconds per machine.
I just reloaded 8 printers in under 3 minutes. Every one of them was still running.
How many printers are you running? Drop it below.
Check out the S1+ at infinityflow3d.com/s1 — link in bio.
#3DPrinting #PrintFarm #BambuLab #Maker #FDMPrinting
It’s keeping everything organized. Files get scattered around. Different printers need different jobs. And somehow you’re always trying to figure out what should run next.
That’s exactly why we built FlowQ. Upload your files once, build your queue, and let the system handle the rest. When a printer becomes available, the next job is already waiting.
No spreadsheets. No sticky notes. No jumping between different printer dashboards. Just one place to manage the entire farm.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
In reality, a lot of time gets wasted between prints. Finding files, managing queues, figuring out what needs to run next, and making sure machines aren’t sitting idle.
That’s why we built FlowQ. Upload your files, organize your queue, and let the system handle the rest. When a printer opens up, the next job is already waiting.
The goal isn’t just faster printing. It’s eliminating all the little delays that add up throughout the day.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
It's all the time they're not printing.
Before we buy another machine, we focus on eliminating the reasons printers stop in the first place. Automatic job starts. Automatic filament reloads. Better workflow management.
Those changes aren't as exciting as unboxing a new printer, but they've probably increased our output more than any single machine we've added.
More printers help. But getting more out of the printers you already own usually comes first.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
Finished prints get cleared. New jobs start automatically. Filament reloads itself when a spool runs out. The printer just keeps producing.
That's what automation feels like. Not faster printing—less waiting, less intervention, and fewer reasons for production to stop.
Once you've seen a printer handle itself, it's surprisingly hard to go back to doing everything manually.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
You buy a $20, $40, even $100 roll for a big project. You run it for hours. Sometimes days.
Then one small jam stops the print cold. The job fails. The filament is wasted. All that time gone with it.
This filament cutter sits in line with your setup. When a jam builds enough pressure, it cuts — letting your printer swap to another roll or stop cleanly on its own.
No clog to dig out. No ruined print to toss.
It's one of the cheapest things you can add to stop throwing money away.
What's the most expensive filament fail you've had? Drop it below.
Check out the filament cutter at infinityflow3d.com — link in bio.
#3DPrinting #3DPrinter #BambuLab #PrintFarm #FDMPrinting
A lot of people assume they've hit the limit of their machine, when in reality they're hitting the limit of their workflow. Filament changes, waiting for the next job, and other small interruptions add up fast.
That's why we focus on automation first. FlowQ keeps printers moving to the next job, and the S1+ keeps them running through filament changes automatically.
It's surprising how productive a single printer becomes when it spends more time printing and less time waiting.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
But most of the time, the real bottleneck isn't printer count. It's how often those printers are actually producing parts.
Before adding more machines, we focus on keeping the ones we have running. FlowQ keeps jobs moving automatically, and the S1+ keeps printers from stopping when a spool runs out.
Once your printers are already running at their full potential, then adding another machine makes sense. Until then, you're usually just adding more downtime.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
Filament tangles or jams mid-print and you don't find out until it's too late. Half a roll gone. Hours wasted. After two or three fails, you've already thrown $20 of filament in the trash.
This filament cutter sits in line between your spool and printer. When a jam builds up enough pressure, it cuts — letting your printer finish with another roll or pause on its own.
No more clogs. No more digging out jammed filament for an hour.
It's one of the cheapest upgrades you can add, and it pays for itself the first time it saves a roll.
How much filament have you wasted to jams this year? Drop it below.
Check out the filament cutter at infinityflow3d.com — link in bio.
#3DPrinting #3DPrinter #BambuLab #PrintFarm #Maker
If you're in the UK or Australia, you've been stuck doing manual filament reloads. Pausing prints. Hoping a spool lasts through the night. And the few options that do ship to you lock you into one printer brand.
The S1+ is the automatic filament reloader thousands of people have been running on their printers in North America. It works on any 3D printer. Setup is plug and play. No brand lock-in.
We finally opened up international shipping starting with the UK and Australia. Preorders are live now with limited-time launch deals.
More countries coming soon. Drop yours in the comments if you want to be next.
Check out the S1+ at infinityflow3d.com
link in bio
#3DPrinting #3DPrinter #BambuLab #FilamentRunout #Maker
Some filament reload systems just don't ship internationally, so you're stuck swapping rolls by hand and hoping nothing runs out overnight.
That's why we finally opened up shipping for the S1+. It feeds the next spool in automatically using the force already in your extruder. No firmware changes. No brand lock-in. Works on almost any printer.
Preorders are live with limited-time launch deals.
We're expanding to more countries soon. Drop yours in the comments if you want to be next.
Check out the S1+ at infinityflow3d.com
link in bio.
#3DPrinting #3DPrinter #BambuLab #PrintFarm #FilamentRunout
You start a long print before bed. You wake up and it stopped halfway through. Filament ran out at 3am.
Unless your printer came with an AMS, there's nothing built in to stop this.
The S1+ feeds the next spool in automatically the second one runs out. No pause. No wasted print.
Works on any printer. Connect a tube, turn it on, that's it.
How many overnight prints have you lost to runout? Drop it below.
Check out the S1+ at infinityflow3d.com — link in bio.
#3DPrinting #3DPrinter #BambuLab #Maker #FilamentRunout
You're switching tabs, clearing beds by hand, and manually starting every single print.
FlowQ puts your whole setup in one place. One dashboard, one queue, one file library.
It starts your next print on its own the second the bed clears.
FlowQ Connect is free and runs right from your computer. No extra hardware needed.
How many printers are you running? Drop it below.
Try FlowQ Connect free at infinityflow3d.com/flowq
Link is in our Bio.
#3DPrinting #PrintFarm #BambuLab #Maker #3DPrinter
But honestly, something as simple as automatic bed swapping changes everything. One printer suddenly stops acting like one printer.
That’s why we built the A1 & A1 Mini Bed Swaps. The printer finishes a part, clears the bed, loads the next plate, and immediately starts the next print on its own. No babysitting between jobs.
Once you see a printer continuously producing by itself, it completely changes how you think about what a single machine can do.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d #BambuA1 #BambuA1Mini
Modern slicers let you add commands directly into the print file, which means your printer can automatically clear the bed and start the next job on its own. Once it’s set up, the process just repeats every time you run the file.
We built full A1 & A1 Mini bed swap systems around this idea — including the files and hardware kits — so anyone can try it without figuring it all out from scratch.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
At scale, the leftover on every spool adds up fast. It’s not noticeable day to day, but over time it’s a huge amount of waste.
The S1 fixed that for us. It runs spools all the way down and automatically reloads, so nothing gets left behind. We just reload every few days and let it run.
Less waste, less intervention, and the printers never stop.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d
The longer the print, the higher the chance something small turns into a full failure while you’re asleep. Most of the time, it’s just the printer running out of filament and stopping.
We fixed that with the S1+. It automatically reloads the next spool so the print never pauses. We’ll stack a couple 3kg rolls and let it run for days without touching it.
That’s what makes overnight prints actually reliable.
#3dprinting #3dprinter #printfarm #3dprint #automation #additivemanufacturing #3dprintinglife #makers #infinityflow3d


