How to Align a Laser | Thorlabs Insights Thorlabs 2026-09-17 | How to Align a Laser | Thorlabs Insights
Ergonomic ScienceDesk™ Workstations with Motorized Height Adjustment Thorlabs 2022-11-30 | Our patented height adjustable ergonomic ScienceDesk™ workstations feature motorized work surface height adjustment in addition to our active-air or passive isolation methods. These workstations are designed for research and production environments where hot desking between multiple users or switching between sit/stand configurations is desired; the motorized adjustment ensures an ergonomic work surface height for any user. A control panel on the front of the workstation makes raising and lowering the work surface easy with customizable presets and an emergency stop button. Additionally, an optical beam to the left of the control panel acts as a safety interlock, stopping motion when broken by a person or object.ScienceDesk™: thorlabs.com/newgrouppage9.cfm?objectgroup_id=15423ScienceDesk™ Accessories: thorlabs.com/navigation.cfm?guide_id=2369
Quantum Optomechanics at the Standard Quantum Limit Thorlabs 2022-11-22 | Professor Thomas Corbitt of Louisiana State University (LSU) joins us to talk about his experience and knowledge working with measurements of quantum noise. He will discuss a series of experiments using microfabricated epitaxial mirrors suspended on single-crystal cantilevers, a method to reduce the limits to the sensitivity of interferometers using squeezed lights, and more.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Fluoride Glass and Optical Fibers Thorlabs 2022-11-15 | Thorlabs manufactures an extensive family of mid-IR fluoride fiber using proprietary techniques that provide world-class purity, precision, and strength. These techniques give us excellent control over the fibers' optical and mechanical properties, allowing a wide range of configurations to be drawn. Dave Gardner, Senior Engineer, returns to highlight these techniques, the history of fluoride fiber R&D, and the state of fluoride fiber technology today and in the future.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
The Gravitational-Wave Revolution Thorlabs 2022-10-19 | Dr. David Reitze, Executive Director at LIGO Laboratory and Research Professor at Caltech, joins us for an informative presentation on gravitational waves. He will provide an overview of gravitational wave astrophysics, highlight some of the most exciting discoveries, and discuss how we detect gravitational waves with LIGO using large interferometers capable of sensing displacements to a precision of better than 0.000000000000000001 meters.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891Chapters:0:00 Introduction2:43 Gravitational Waves and Precision Interferometry for Gravitational-Wave Detection14:54 The Advanced LIGO Interferometric Detector35:13 Highlights of the Gravitational-Wave Revolution47:04 The Future of Gravitational-Wave Astrophysics49:56 Q&A with Dr. David Reitze
Working with CF Vacuum Flanges | Thorlabs Insights Thorlabs 2022-09-22 | A vacuum coupling that supports operation at ultra-high-vacuum levels (greater than 10E-8 Torr; greater than 1.33 x 10E-8 mbar, greater than 1.33 x 10E-8 hPa) can be achieved when a metal gasket is compressed between two CF or ConFlat® flanges. An approach for making this coupling is demonstrated using a CF-flanged fiber optic feedthrough and a port on a CF-flanged tee. Since the quality of the vacuum seal and the time required to pump the vacuum system down to operating pressure depend on more than just ensuring the bolts are tightened correctly, this demonstration also highlights several practices for working with vacuum components and systems that can help achieve good results.Damage to the knife edge, an aggressive approach to tightening the bolts, and reusing gaskets can all result in leaky CF vacuum couplings. The techniques demonstrated in this video reduce the risk presented by these factors, which are all related to the limited malleability of the metal gasket. It is important that the knife edges are in pristine condition, since the gasket is not soft enough to fill narrow or abrupt features, such as a nick in a knife edge. An approach of gradually and iteratively tightening the bolts is effective in maintaining a uniform thickness of the gasket around its circumference, while tightening each bolt all at once can result in thickness variations in the gasket that are difficult or impossible to flatten. This is a consequence of the metal gasket’s limited ability to flow and can result in gaps between the gasket and knife edges. Using a new gasket is always recommended. Even a gasket that was only partially compressed during a previous use may not be malleable enough, when reused, to conform to the contours of the knife edges. This is because compression has the effect of strain (work) hardening the metal.While a leaky vacuum connection can result in time lost to leak checking and re-opening the vacuum system to locate and fix the problem, productive work can also be delayed as a result of broken or malfunctioning components in or attached to the chamber. Due to this, an overview of special considerations for handling and using fiber feedthroughs is also included in this video.ConFlat® is a registered trademark of Agilent Technologies, Inc.00:00 Introduction01:03 Sleeve and Glove Partnership02:55 CF Flange Coupling Overview06:00 Flange Decoupling Demonstration09:41 Safely Remove a Stuck Gasket10:38 Feedthrough Handling, Cleaning 12:09 Copper Gasket Use13:01 Fiber End Face: Inspect, Clean 13:58 Flange on Port: Inspect, Wipe 14:51 Couple the Two Flanges19:43 Glove and Sleeve Removal Key Components used in this Demonstration Include:- Ultra-High-Vacuum Fiber Feedthrough Flanges: thorlabs.com/newgrouppage9.cfm?objectgroup_id=13585&YVI=25 - Ultra-High-Vacuum Fiber Optic Patch Cables: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=8372&YVI=25 - VGC10 1/4-Hard Copper Gaskets: thorlabs.com/newgrouppage9.cfm?objectgroup_id=13585&pn=VGC10&YVI=25 - FS201 Fiber Inspection Scope: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1427&pn=FS201&YVI=25 - FCC-7020 Fiber Connector Cleaner: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3317&pn=FCC-7020&YVI=25 - BD8 Solvent Dispenser: thorlabs.com/newgrouppage9.cfm?objectgroup_id=330&pn=BD8&YVI=25 - Nitrile Gloves: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1453&YVI=25 - KW32 Wipes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=330&pn=KW32&YVI=25 For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=25
Educational Atomic Force Microscope: Assembly Thorlabs 2022-09-16 | This animation shows the main steps for assembling the EDU-AFM1(/M) Educational Atomic Force Microscope on a breadboard (not included). For more information about the kit, see Thorlabs’ website.thorlabs.com/newgrouppage9.cfm?objectgroup_id=10756
The Nature Conservancy of New Jersey | Thorlabs and Our Community Thorlabs 2022-09-13 | Thorlabs is pleased to support the efforts of The Nature Conservancy (TNC) of New Jersey, which holds the indispensable task of preserving the area’s waterways and wildlife habitats. TNC has protected more than 60,000 acres of land and water across the state and, with the help of volunteers, ensures that New Jersey remains green for generations to come.
Fluoride Fiber Manufacturing | Inside Thorlabs Thorlabs 2022-08-09 | Thorlabs is one of the only fluoride fiber manufacturers in the world. Our Zblan and Indium Fluoride glass fibers transmit from the UV to the mid-IR range and feature excellent process control and consistency. These fibers are made in our vertically integrated manufacturing facility in Newton, NJ, where our team of scientists and engineers are investing in fluoride fiber R&D.To view our fluoride fibers, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=7062.
Python Automation of a Power Meter and Rotation Mount (Viewer Inspired) | Thorlabs Insights Thorlabs 2022-07-26 | A Python script that automates control of a Kinesis® K-Cube™ motor controller and a power meter is written using Visual Studio® Code. The program acquires optical power measurements from the power meter as the rotation mount's angle sweeps through 180°, which is required to characterize a variable optical attenuator. Since this code uses libraries developed using the .NET framework, running this code requires Python.NET to be installed.This tutorial implements the code specific to the K-Cube motor controller first, followed by the code for the power meter. The packages and classes required by both devices are identified, and the steps required to initialize and complete shutdown for both devices are shown. In addition, an approach is described for acquiring power readings and checking controller status while the motor is moving. The Python script is executed once after the K-Cube section of the code is complete, and a second time after the program is finished.The K-Cube motor controller and power meter were automated in order to characterize the optical power transmitted through a pair of fixed, crossed linear polarizers when a rotating half-wave plate is located between them. As the half-wave plate rotates, the polarization orientation of the light transmitted by the output polarizer remains constant, while the transmitted power varies sinusoidally. Measurements of this transmitted optical power, as well as the corresponding rotation angles of the mount in which the half-wave plate is secured, are provided by the program.The Python code demonstrated during this video can be downloaded from Thorlabs' official GitHub account: github.com/Thorlabs/Motion_Control_Examples/tree/main/Python/KCube 00:00 Introduction00:35 Variable Optical Attenuator Overview01:45 Brief Discussion of Project Setup02:21 Packages and Classes for K-Cube03:51 Initialize K-Cube Motor Controller07:20 Home the Rotation Mount07:46 Move the Rotation Mount09:38 Controller Shutdown10:00 Test Run of Rotation Mount Code10:28 Packages and Classes for Power Meter11:50 Initialize Power Meter14:10 Acquire and Display Power Readings16:37 Execute Complete ProgramComponents used in this demonstration include:- Thorlabs' software download page: thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=Motion_Control&YVI=24- KDC101 K-Cube Brushed DC Servo Motor Controller: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2419&pn=KDC101&YVI=24 - PRM1Z8 Motorized Rotation Stage: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2875&pn=PRM1Z8&YVI=24 - PL202 Compact Laser Module: thorlabs.com/newgrouppage9.cfm?objectgroup_id=12994&pn=PL202&YVI=24 - AD11F Adapter (Laser to Mount): thorlabs.com/newgrouppage9.cfm?objectgroup_id=219&pn=AD11F&YVI=24 - KM100T Threaded Kinematic Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9913&pn=KM100T&YVI=24 - PRM1 Manual Rotation Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=990&pn=PRM1&YVI=24 - Linear Polarizers: thorlabs.com/navigation.cfm?guide_id=2459&YVI=24 - Wave Plates: thorlabs.com/navigation.cfm?guide_id=23&YVI=24- S121C Photodiode Power Sensor: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3328&pn=S121C&YVI=24 - PM400 Optical Power Meter: thorlabs.com/newgrouppage9.cfm?objectgroup_id=10562&pn=PM400&YVI=24 - 1" Diameter Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3307&YVI=24 - SM1RC Slip-Ring Mount for SM1 Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1533&pn=SM1RC&YVI=24- BA2 Mounting Base: thorlabs.com/newgrouppage9.cfm?objectgroup_id=47&pn=BA2&YVI=24 - FSR3 Fiber Storage Reel: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2685&pn=FSR3&YVI=24For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=24
Use Laser Speckle to Find the Beam Focus | Thorlabs Insights Thorlabs 2022-06-07 | When a lens is mounted in a lens tube, optic mount, or cage plate, the exact position of the lens within the fixture may not be known, which can make it difficult to accurately predict the location of the beam focus and align the system. One approach to finding the beam focus with respect to the fixture uses laser speckle.During this demonstration, laser speckle is used to find focal points provided by lenses mounted in individual lens tubes. After locating the focus of each mounted lens, the distance between the focal point and the external shoulder of each lens tube is measured.The mounted lenses are then used to construct a Keplerian beam expander, using a design in which empty lens tubes are inserted between the two mounted lenses. The required total length of the lens tubes separating the two mounted lenses is estimated using the previously measured distances to the focal points. This approach avoids tedious trial-and-error that can result when the beam expander is constructed by first guessing the required total lens tube length, and then iteratively measuring beam quality and adjusting the length until achieving the desired result.A transmissive glass diffuser is used during this demonstration to create the speckle pattern. The size of the speckle is largest when the ground surface of the diffuser is at the focus, where the beam size is smallest. It is recommended that the beam is incident on the ground face of the diffuser. This allows direct measurement of the distance to the focus, without needing to take the diffuser's optical thickness into account. After assembling the beam expander, a shearing interferometer is used to fine-tune the collimation of the expanded beam.00:00 - Introduction00:42 - View Beam Spot to Find Focus01:53 - Speckle Size vs. Beam Diameter02:56 - Diffuser Setup and Alignment03:19 - Speckle Used to Find Focus05:01 - Keplerian Beam Expander 05:33 - Building a 2X Beam Expander 08:46 - Check Beam Expansion10:00 - Check Collimation with Shear PlateComponents used in this Demonstration Include:- Optical Diffuser: thorlabs.com/navigation.cfm?guide_id=17&YVI=23- DIY Adapter (Diffuser to Slip-Ring Mount), SM1RR Retaining Ring and SM1T1 Lens Tube Coupler: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1535&pn=SM1RR&YVI=23thorlabs.com/newgrouppage9.cfm?objectgroup_id=2704&pn=SM1T1&YVI=23- Plano-Convex Lenses: thorlabs.com/navigation.cfm?guide_id=2242&YVI=23- SI100 Shearing Interferometer: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2970&pn=SI100&YVI=23- PL202 Compact Laser Module: thorlabs.com/newgrouppage9.cfm?objectgroup_id=12994&pn=PL202&YVI=23- AD11F Adapter (Laser to Mount): thorlabs.com/newgrouppage9.cfm?objectgroup_id=219&pn=AD11F&YVI=23- KM100T Threaded Kinematic Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9913&pn=KM100T&YVI=23- 1" Diameter Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3307&YVI=23- Adjustable 1" Diameter Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=4109&YVI=23- SM1RC Slip-Ring Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1533&pn=SM1RC&YVI=23- Optical Rail: thorlabs.com/newgrouppage9.cfm?objectgroup_id=30&YVI=23- Optical Rail Carriers: thorlabs.com/newgrouppage9.cfm?objectgroup_id=8295&YVI=23- DIGC6 Digital Calipers: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1423&pn=DIGC6&YVI=23- R2 Post Collar: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2003&pn=R2&YVI=23- EDU-VS1 Viewing Screen: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7489&pn=EDU-VS1&YVI=23- FSR3 Fiber Storage Reel: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2685&pn=FSR3&YVI=23- SPW502 Retaining Ring Wrench: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1430&pn=SPW502&YVI=23- BHM3 Ruler: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7243&pn=BHM3&YVI=23- VC3C V-Groove Block: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1317&pn=VC3C&YVI=23 For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=23
Mounting Your Optomech: Bases, Post Holders, and Posts | Thorlabs Insights Thorlabs 2022-04-29 | Optical setups are typically built upon a foundation of optomechanical components like posts, post holders, and bases. There are different approaches to designing and building the foundation. Some result in optical setups that are more affected by vibrations and more likely to be misaligned when bumped. In addition, certain techniques used to assemble components can accidentally damage them.Unfortunately, it is typically necessary to build the entire setup to observe the effects of different approaches, so evaluating the benefits and disadvantages of each can be difficult or time consuming. In addition, the existence of other approaches may not be obvious, since it can be easy to avoid thinking about components that are as familiar as posts, post holders, and bases. The techniques presented in this video are methods we have found useful and should provide a good starting point for working with optomech.This demonstration shines a spotlight on these common building-block components and includes tips learned though long experience designing and working with them. The purpose and use of features that may have escaped notice, such as the relief cut on bases, the through hole in optical posts, and the benefits of washers are revealed. Guidelines for choosing post and post holder heights to increase mechanical stability are provided, as well as suggestions for avoiding damage to kinematic mounts when attaching a post. This video also demonstrates a potentially unexpected approach for mounting larger components, which uses two post holders, two posts, and a base. Additional tips for avoiding unintended consequences and preserving the full adjustment height when bolting post holders to optical tables, bases, and breadboards are demonstrated in this Video Insight: youtu.be/HyUXsH1zuIk 00:00 - Introduction00:24 - Two Sides of Mounting Bases01:16 - Washers Prevent Damage03:12 -Overlooked Post Features04:09 - Tips for Safely Grasping Mounts05:32 - Mounting Large Optomechanics I06:43 - Post Holders are Better on Bases 07:43 - Post and Post Holder Heights08:44 - Mounting Large Optomechanics IIComponents used in this Demonstration Include:- KMSS Compact Mirror Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=52&pn=KMSS&YVI=22 - KM100 Mirror Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1492&pn=KM100&YVI=22 - LDM90 Laser Diode Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=308&pn=LDM90&YVI=22 - BA2 Mounting Base: thorlabs.com/newgrouppage9.cfm?objectgroup_id=47&pn=BA2&YVI=22 - Posts: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1266&YVI=22 - Post Holders: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1268&YVI=22 - 8-32 Hardware Kit (M4 Kit also Available at this Link): thorlabs.com/newgrouppage9.cfm?objectgroup_id=248&pn=HW-KIT1&YVI=22 - 1/4”-20 Hardware Kit (M6 Kit also Available at this Link): thorlabs.com/newgrouppage9.cfm?objectgroup_id=248&pn=HW-KIT2&YVI=22 - Balldriver Caddy Kit (Metric Kit also Available at this Link): thorlabs.com/newgrouppage9.cfm?objectgroup_id=1407&pn=TC4&YVI=22 For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=22
Obtaining Spectral Measurements: Live Product Demo Thorlabs 2022-04-22 | Dr. Carl Borgentun, a member of Thorlabs' optical spectrum analyzers development team, will demonstrate the newly released Redstone™ Optical Spectrum Analyzer (OSA305). This live demonstration will include an example of gas absorption spectroscopy, some interactive examples using the GUI interface, an explanation of customization options, and a review of Thorlabs' Software Development Kit possibilities for LabVIEW, C++, C#, and Python.For more information on the OSA305, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=5276&pn=OSA305.To view more product demonstration webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=15004.
Optical Coherence Tomography for Biofilm Research Thorlabs 2022-04-15 | Dr. Robert Nerenberg from the University of Notre Dame will detail how optical coherence tomography (OCT) has become an emerging tool for biofilm research, providing many new opportunities for biofilm imaging. Examples will include time-lapse imaging of biofilm growth, spatial mapping of biofilm cell density, and mapping biofilm development in porous plastic supports, among others.For more educational webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Optimizing the Transient Absorption Signal in the EDU-TRAS1(/M) Educational Kit Thorlabs 2022-04-08 | Thorlabs' EDU-TRAS1(/M) Time-Resolved Absorption Spectroscopy (TRAS) kit investigates the transient absorption (TA) signal in the molecule zinc-tetraphenylporphyrin (ZnTPP). This video shows the procedure for optimizing the beam overlap to maximize the TA signal. To learn more, view the full web presentation at thorlabs.com/newgrouppage9.cfm?objectgroup_id=14444.
Working with KF (QR) Vacuum Flange Components | Thorlabs Insights Thorlabs 2022-04-01 | A vacuum connection between two KF flanged components is made by compressing an O-ring between the two flanges. Minimizing leak rates through this vacuum coupling requires the flat flange faces to be smooth and clean, as well as the O-rings to be malleable and undamaged. This video demonstrates methods for coupling and disconnecting KF flanged components and shares tips for handling, maintaining, and assembling these popular vacuum flanges. Vacuum systems that include KF flanges can generally support vacuum levels down to 10-8 Torr (1.33 x 10-8 mbar, 1.33 x 10-8 hPa). Note that while the flange type is identified as KF (or QR), flange sizes may be specified using functionally equivalent prefixes of KF, DN, or NW. There are many benefits to using KF flanged components in vacuum systems, including a genderless design, standardized sizes, quick decoupling and reconnection times, and being relatively inexpensive. Many of these features are made possible by the elastomeric O-ring that serves as a gasket.The effectiveness of the vacuum seal depends on several factors including the conditions of both flange faces and the O-ring, the compression applied to the O-ring, and the O-ring's history of temperature exposure and usage. Excessive amounts of compression (greater than 60%) and exposure to high temperatures increases the rate at which the O-ring develops compression set. Compression set is a term used to refer to permanent changes in the O-ring's shape, which includes stiffening of the elastomeric material. Inspecting the O-ring and flange surfaces as shown in the video, and then replacing damaged components and stiffened O-rings can optimize performance. The application of vacuum grease to an O-ring is also demonstrated, and guidance for determining whether or not to use vacuum grease is provided. 00:00 - Introduction00:47 - Comments on Personal Protective Equipment 01:46 - Double Gloving and Removing Gloves03:36 - Aluminum Foil Work Surface04:19 - Components and Features of a KF Flange Assembly05:51 - Specifying Flange Size 07:03 - O-Ring Temperature Sensitivity and Compression Set08:21 - Storing KF Vacuum Components09:46 - Inspect and Wipe Sealing Surfaces13:22 - Couple Elbow and Pipe and Show Chamfered Edges15:33 - Vacuum Grease 18:51- Couple Blank to AssemblyKey Components used in this Demonstration Include:- KF25WNC Wing Nut Clamp: thorlabs.com/newgrouppage9.cfm?objectgroup_id=15220&pn=KF25WNC&YVI=21 - KF25CR-F O-Ring and Carrier: thorlabs.com/newgrouppage9.cfm?objectgroup_id=15220#15227&YVI=21 - KF25CP KF Blank Flange Cap: thorlabs.com/newgrouppage9.cfm?objectgroup_id=15220&pn=KF25CP&YVI=21 - Elbow and Straight KF25 Pipes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=15220#15225&YVI=21- BD8 Solvent Dispenser: thorlabs.com/newgrouppage9.cfm?objectgroup_id=330&pn=BD8&YVI=21 - Nitrile Gloves: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1453#9626&YVI=21 - KW32 Wipes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=330&pn=KW32&YVI=21 For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=21
Voice Coil Flexure Scanner for Interferometry Applications Thorlabs 2022-03-08 | Thorlabs’ VCFL35(/M) Voice Coil Flexure Scanner offers flexibility for your interferometry, delay line, and beam displacement applications. The scanner provides fast, smooth, and affordable motion of a Ø1/2” optic over a 3.5 mm travel range. To learn more, view the full web presentation at thorlabs.com/newgrouppage9.cfm?objectgroup_id=14930.
Installing Argon Cylinder and Regulator for Use with Thorlabs Vytran Filament Fusion Splicers Thorlabs 2022-02-16 | In this video, we will demonstrate how to properly install an argon cylinder and regulator that are necessary to provide the inert environment for filament fusion splicing. For more information on filament fusion splicers, please visit: thorlabs.us/navigation.cfm?guide_id=24290:00 Title0:25 Tools Required0:32 Operating Principle0:50 Gas Line, Regulator, and Argon Purity1:07 Anchor Point1:30 Uncapping Outlet1:46 Cleaning2:26 Attaching Regulator2:54 Attaching PTFE Line to Regulator3:14 Valves and Gauges3:28 Flushing the Line3:58 Attaching PTFE Line to Unit4:24 Purging the Unit and Verifying Pressure5:01 Shutdown Procedure
Align FiberPorts on a FiberBench (Viewer Inspired) | Thorlabs Insights Thorlabs 2022-02-16 | This video demonstrates a complete procedure for aligning two FiberPorts on a FiberBench. The procedure takes into account the coupled functionality of the various adjustment screws, such as the ZΘ screws. Adjusting any of the three ZΘ screws individually affects both the angular orientation and Z-axis position of the lens. When all three ZΘ screws are adjusted as a set, it is possible to move the lens such that the final position corresponds to only a change in angular orientation or shift in position along the Z-axis.For example, adjusting each of the three ZΘ screws by the exact same amount in the same direction translates the lens along the Z-axis without affecting the lens' angular orientation. The different techniques used to complete this and other adjustments are shown during the demonstration, so that this alignment procedure can be customized according to preference.Before aligning the FiberPorts to one another, the lens in each should be pre-aligned to collimate light from a coupled optical fiber. The pre-alignment step should not be necessary if the FiberPort has not been used, since FiberPorts are provided pre-aligned. The alignment procedure begins by tuning the X-axis and Y-axis adjusters and progresses to the ZΘ adjusters. To avoid complicating the alignment procedure, it is recommended that the X- and Y-axis adjuster positions are not changed after beginning work with the ZΘ adjusters.The optical power collected by the coupling fiber is used to monitor the progress of the alignment procedure. However, it should be noted that a drop in power after an adjustment may not indicate a misstep in the procedure. Instead, the drop may correspond to a local minimum en route to a global maximum. This demonstration provides tips for interpreting and investigating the progress of the alignment, as well as advice for making consistent adjustments.00:00 - Introduction01:12 - FiberPort Adjuster Overview02:51 - Pre-Align First FiberPort05:29 -Collimate First FiberPort08:58 - Pre-Align Second FiberPort11:11 - Collimate Second FiberPort12:22 - Configure for Rough Alignment (Multimode Fiber)14:29 - X-Y Adjustment15:00 - Z-Axis and Angular Adjustment17:19 - Configure for Fine Alignment (Single Mode Fiber)19:10 - X-Y Adjustment20:04 - Z-Axis and Angular Adjustment20:29 - Unscrew Fiber Connector Nut Test21:04 -Z-Axis Steps Followed by Angle Corrections23:11 - Conclude AlignmentKey Components used in this Demonstration Include:- PAF2-2B FiberPorts: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2940&pn=PAF2-2B&YVI=20 - FB-76W SM1 FiberBench: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3092&pn=FB-76W&YVI=20 - SM1D12D Iris Diaphragm: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1479&pn=SM1D12D&YVI=20 - LMR1 Mount with SM1 Threads (for Iris Assembly): thorlabs.com/newgrouppage9.cfm?objectgroup_id=1433&pn=LMR1&YVI=20 - RS05P8 Pillar Post (for Iris Assembly): thorlabs.com/newgrouppage9.cfm?objectgroup_id=241&pn=RS05P8&YVI=20 - BA2F Flexure Clamping Base (for Iris Assembly): thorlabs.com/newgrouppage9.cfm?objectgroup_id=47&pn=BA2F&YVI=20Other Components:- S1FC637 Benchtop Laser Source: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1500&pn=S1FC637&YVI=20- P5-630A-PCAPC-1 Single Mode Patch Cable FC/PC to FC/APC: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1634&pn=P5-630A-PCAPC-1&YVI=20- M42L01 Multimode Fiber Patch Cable: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5794&pn=M42L01&YVI=20 - P1-630A-FC-1 Single Mode Patch Cable FC/PC to FC/PC: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1362&pn=P1-630A-FC-1&YVI=20 - PM400 Power Meter: thorlabs.com/newgrouppage9.cfm?objectgroup_id=10562&pn=PM400&YVI=20 - S130C Power Sensor: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3328&pn=S130C&YVI=20 - SM1A29 SM1 Thread Adapter (for Power Sensor Assembly): thorlabs.com/newgrouppage9.cfm?objectgroup_id=3328&pn=SM1A29&YVI=20- S120-FC2 Adapter Cap (for Power Sensor Assembly): thorlabs.com/newgrouppage9.cfm?objectgroup_id=69&pn=S120-FC2&YVI=20- BHM3 Ruler: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7243&pn=BHM3&YVI=20 - FS201 Fiber Inspection Scope: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1427&pn=FS201&YVI=20 - FCC-7020 Fiber Connector Cleaner: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3317&pn=FCC-7020&YVI=20- TC4 Balldriver Caddy: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1407&pn=TC4&YVI=20For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=20
LDC Cleavers: Performing an Angled Cleave Thorlabs 2022-02-14 | In this video, we will discuss how to perform an angled cleave using a Thorlabs Vytran LDC cleaver.For more information on LDC401 and LDC401A Fiber Cleavers, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9352For more information on the Portable LDC450B Cleaver, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=13997For more information on performing a flat cleave using the tension-and-scribe method, please visit:youtube.com/watch?v=_mEMlYUCYfs&list=PLN3i-H51ZELhGQFBFnVNXZX_pUkNItXn8&index=5For more information on assembling a Transfer Insert:youtube.com/watch?v=WIWH-kbw0yU&feature=youtu.be0:00 Introduction to Angled Cleaves2:27 Angle Cleave Parameters3:29 Cleaver Inserts and Fiber Prep4:44 Loading the Fiber5:35 Performing the Angled Cleave6:22 Removing the Cleaved Fiber6:54 Measuring the Cleave Angle7:40 Iterating the Cleave Parameters
GPX Glass Processing Application - Taper Thorlabs 2022-02-11 | This video will demonstrate the capability of GPX series glass processors to produce and measure drawn fiber tapersTo view the video on GPX Filament Normalization, please visit:youtube.com/watch?v=GT9SwtdUDDE&list=PLN3i-H51ZELjNhudOExN7d3QSA85mIGvv&index=11 To learn more about GPX Glass Processors, please visit:thorlabs.us/newgrouppage9.cfm?objectgroup_id=9326orthorlabs.us/newgrouppage9.cfm?objectgroup_ID=93660:00 Introduction to Tapers1:13 Taper Properties2:40 Tapering Steps3:00 Normalizing the Filament4:05 Preparing the Fiber4:51 Drawing the Taper5:59 Measuring the Taper
GPX Glass Processing Application- Lensed Fiber Thorlabs 2022-02-09 | This video will demonstrate the capability of GPX series glass processors to produce and measure drawn fiber lenses. To view the video on GPX Filament Normalization, please visit:youtube.com/watch?v=GT9SwtdUDDE&list=PLN3i-H51ZELjNhudOExN7d3QSA85mIGvv&index=11 To learn more about GPX Glass Processors, please visit:thorlabs.us/newgrouppage9.cfm?objectgroup_id=9326orthorlabs.us/newgrouppage9.cfm?objectgroup_ID=9366To learn more about Thorlabs' lensed fibers, please visit:thorlabs.us/newgrouppage9.cfm?objectgroup_id=120000:00 Introduction to Lensed Fibers1:35 Normalizing the Filament2:44 Preparing the Fiber3:09 Forming the Lens4:51 Measuring the Lens
Powering Up and Powering Down the GPX Glass Processor Thorlabs 2022-02-07 | Proper power up and power down procedure to follow when operating the GPX3000 series glass processing systems. For more information on our GPX Glass Processors, visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9326 For more information on our GPX Glass Processors with Integrated Cleaver, visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9366 For more information on the FFS3 Software, visit:youtube.com/playlist?app=desktop&list=PLN3i-H51ZELiwmWgP1o4mMqNhNHWKtsFP Chapters:0:00 Title0:14 Power Up1:29 Power Down
Recommended Tools for Vytran Equipment Thorlabs 2022-01-26 | Email any question to techsupport@thorlabs.com or vytran.uk@thorlabs.com. This video will review some of the tools you should have on hand prior to receiving your Vytran equipment, which will aid in setup and operation of the unit.Razor Blades - thorlabs.com/thorproduct.cfm?partnumber=TBSBHex Keys - thorlabs.com/newgrouppage9.cfm?objectgroup_id=1407Fiber Stripping Tools - thorlabs.com/newgrouppage9.cfm?objectgroup_id=1388Cleaning Tools - thorlabs.com/newgrouppage9.cfm?objectgroup_id=330Laser Safety Glasses - thorlabs.com/newgrouppage9.cfm?objectgroup_id=762Adhesive Tap - thorlabs.com/thorproduct.cfm?partnumber=KAP22-075Sharps Bin - thorlabs.com/thorproduct.cfm?partnumber=FTDUTweezers - thorlabs.com/newgrouppage9.cfm?objectgroup_id=1453Visual Inspection Tools - thorlabs.com/newgrouppage9.cfm?objectgroup_id=1427Chapters:0:00 Title0:33 Torque Driver0:49 Razor0:56 Adjustable Wrench1:12 Flat Head Screwdriver1:31 Hex Keys1:42 Ruler and Felt Tipped Marker1:55 Strip Tool2:03 Chemicals and Cleaning Equipment2:40 Laser Safety Equipment2:55 Tape3:08 Tweezers and Sharps Bin3:20 Magnifiers
Camera Setup and Image Acquisition Using Visual Studio® and C# Programming | Thorlabs Insights Thorlabs 2022-01-25 | When a scientific camera is integrated into a setup, it can be convenient to automate image acquisition and storage using a hardware trigger. This can be enabled using the software development kit (SDK) provided with Thorlabs' scientific cameras. The use of the SDK to control the operation of a scientific camera is demonstrated using a custom Visual Studio® console application written in C#, as well as a setup that includes a scientific camera, light emitting diode (LED), LED driver, and PC.The demonstration begins with a general overview of the setup, and then steps through the settings needed to configure the LED driver to pulse the LED five times while providing a TTL output signal each time. Pulsing the light source is one approach to limiting a sample's total light exposure, and the TTL signal can be used to synchronize image acquisition with the illumination of the sample. A cable couples the TTL hardware trigger to the camera.A blank Visual Studio console application is then opened, and the code is explained as it is typed line-by-line. The program finds all available cameras connected to the PC and is used to select one, whose parameters the program will configure for the setup. The exposure time is set to be slightly less than the LED pulse duration, and a single image acquisition is specified to occur when a hardware trigger is received. Each image is saved to a file as a bitmap, and the total number of acquired images is limited to five. The demonstration concludes with the successful execution of the program, which results in five saved image files that were each taken during a separate flash of the LED.The C# code demonstrated during this video can be downloaded from Thorlabs' official GitHub account: github.com/Thorlabs/Camera_Examples/blob/main/C%23/Compact_Scientific_Cameras/Hardware_Triggering/Program.csThe DLLs added during project setup are provided in the Scientific Camera Interfaces folder: C:\Program Files\Thorlabs\Scientific Imaging\Scientific Camera Support\Scientific Camera InterfacesDetailed documentation that includes the camera's supported features is found in this folder: C:\Program Files\Thorlabs\Scientific Imaging\Documentation\Scientific Camera Documents00:00 - Introduction00:35 - LED Controller Setup and Connection02:30 - Brief Discussion of Project Setup (Libraries, Imports)03:58 - Discover Available Cameras05:39 -Open a Selected Camera06:03 - Set Camera Parameters07:59 - Prepare Camera to Acquire Desired Images09:44 - Receive and Save Acquired Images11:29 - Clean Up the Camera Resources12:03 - Successful Execution of CodeComponents used in this demonstration include:- Thorlabs' software download page: thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=ThorCam&YVI=19- CS165MU1 1.6 MP Monochrome CMOS Camera: thorlabs.com/newgrouppage9.cfm?objectgroup_id=13677&pn=CS165MU1&YVI=19- DC2200 LED Driver with Pulse Modulation: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9117&pn=DC2200&YVI=19- Mounted LED: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2692&YVI=19- DG10-600-MD SM1-Mounted Ground Glass Diffuser: thorlabs.com/newgrouppage9.cfm?objectgroup_id=6905&pn=DG10-600-MD&YVI=19- SM1RC Slip-Ring Mount for SM1 Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1533&pn=SM1RC&YVI=19- R1L3S3P Positive Grid Distortion Target: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7501&pn=R1L3S3P&YVI=19- XYF1 XY Translation Mount for Rectangular Optics: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5343&pn=XYF1&YVI=19- 1" Diameter, SM1 Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3307&YVI=19 - 1" Diameter, Adjustable SM1 Lens Tubes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=4109&YVI=19 - Unmounted, AR-Coated, Achromatic Doublets: thorlabs.com/newgrouppage9.cfm?objectgroup_id=120&YVI=19For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=19
Installing Fiber Inserts for Thorlabs Large Diameter Splicers and Glass Processors Thorlabs 2022-01-13 | In this video, we will discuss the types of inserts that are used in Glass Processors and LFS splicers and how to fit them into the unit.For more information on GPX Glass Processors, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9326For more information on GPX Glass Processors with an Integrated Cleaver, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9366For more information on LFS Large Fiber Splicers, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9355For more information on CO2 Laser Glass Processors, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=11031For more information on assembling a Transfer Insert, please view:youtube.com/watch?v=WIWH-kbw0yU&feature=youtu.beChapters:0:00 Introductions to Fiber Inserts1:00 Fitting the Inserts1:28 Insert Set Screws2:02 Transfer Insert Overview2:29 Components of a Transfer Insert Assembly2:50 Using a Transfer Insert3:51 Top Inserts for End View Illumination
Thorlabs Veneto® Inverted Microscopy Platform Thorlabs 2022-01-05 | Thorlabs has created a turnkey inverted microscope useful in applications for cell biology, stem cell research, cancer research, multiphoton imaging, and more. With a wide field of view, integrated piezo drive, and multiple imaging modalities, the Veneto® microscope is ideal for today and for 10 years from now. This microscope also has an integrated breadboard so that new methodologies can be easily built off to the side and affixed to the microscope. In addition to these innovative features, we offer drawings, models, and support to ensure anyone who uses the Veneto will have the tools necessary to adapt the system to their application.Please visit our full presentation for more information: thorlabs.com/newgrouppage9.cfm?objectgroup_id=14242
Thorlabs Manufacturing Capabilities Thorlabs 2021-12-28 | This video highlights some of Thorlabs' manufacturing capabilities. For more information, visit thorlabs.com/navigation.cfm?guide_id=2312.
Anodizing Capabilities | Inside Thorlabs Thorlabs 2021-12-15 | Completed in 2020, Thorlabs’ purpose-built anodization facility enables us to anodize portfolio products and custom requests quickly and consistently. The line can perform Type II and Type III anodization and create red, black, and clear color coats. In this video, Thorlabs Metal Finishing Manager, Scott Shadis, discusses the benefits of bringing anodization capabilities in house. To learn more, visit our Anodization Capabilities page at thorlabs.com/newgrouppage9.cfm?objectgroup_id=14891.
Align an Off-Axis Parabolic (OAP) Mirror to Collimate a Beam (Viewer Inspired) | Thorlabs Insights Thorlabs 2021-12-14 | Off-Axis parabolic (OAP) mirrors are often used to collimate divergent beams, but aligning these mirrors can be a frustrating experience. This is because there are multiple variables that must be controlled during the alignment process. This demonstration divides the procedure into discrete steps and includes helpful tips for successfully positioning the mirror and light source. In addition, the dependence of the correct alignment on the mirror's geometry is discussed, and the typical effects of different misalignment geometries on the beam shape are shown on a viewing screen.In this demonstration, the divergent output of an optical fiber and an OAP mirror are aligned so that the incident light and the collimated reflected beam travel in a plane parallel to the surface of the optical table. Because of this, an important initial step in the procedure is to set both the height of the source and the center of the mirror mount's bore at the height of the desired collimated beam. Then, an iterative approach is used in which the mirror is rotated to bring the plane of reflection parallel to the plane of the table, and the fiber's end face is moved to the mirror's focal point.00:00 - Introduction01:00 - Alignment and the Parent Parabola02:12 - Attach the Adapter to the Mirror02:55 -Mount and Coarsely Align the Mirror04:58 - Set Mirror and Source Heights to be Equal05:39 - Initial Positioning of Mirror and Source07:20 - Fine Positioning of Mirror and Source10:37 - Beam Quality, Options, and Having PatienceKey Components used in this Demonstration Include:- MPD149-F01-Off Axis Parabolic Mirror, Ø1", 90°, RFL = 4": thorlabs.com/newgrouppage9.cfm?objectgroup_id=7002&pn=MPD149-F01&YVI=18 - SM1MP SM1 Adapter for Ø1" Off-Axis Parabolic Mirror: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5447&pn=SM1MP&YVI=18 - KC1-T Kinematic SM1-Threaded Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=185&pn=KC1-T&YVI=18 - R2 Post Collar: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2003&pn=R2&YVI=18Other Components Include:- M625F2 Fiber Coupled LED: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5206&pn=M625F2&YVI=18- LEDD1B T-Cube LED Driver: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2616&pn=LEDD1B&YVI=18- M15L01 SMA-SMA Fiber Patch Cable: thorlabs.com/newgrouppage9.cfm?objectgroup_id=351&pn=M15L01&YVI=18 - LMR1 Lens Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1433&pn=LMR1&YVI=18 - SM1SMA SMA Fiber Adapter Plate: thorlabs.com/newgrouppage9.cfm?objectgroup_id=69&pn=SM1SMA&YVI=18 - EDU-VS2 Smaller Viewing Screen: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7489&pn=EDU-VS2&YVI=18 - EDU-VS1 Larger Viewing Screen: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7489&pn=EDU-VS1&YVI=18- BHM3 Ruler: thorlabs.com/newgrouppage9.cfm?objectgroup_id=7243&pn=BHM3&YVI=18 - SPW602 Spanner Wrench: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1430&pn=SPW602&YVI=18 - BM075 Magnetic Button Clamps: thorlabs.com/newgrouppage9.cfm?objectgroup_id=2685&pn=BM075&YVI=18- HW-KIT2 1/4"-20 Cap Screw and Hardware Kit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=248&pn=HW-KIT2&YVI=18For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=18
Characterizing Beam Polarization Thorlabs 2021-12-01 | In this final part of our light characterization series, Manfred Gonnert will further define and characterize polarization. He will provide application examples to help with laser beam alignment, understanding polarization-handedness, manually measuring Stokes parameters, and preventing unwanted interference.To view more of our recorded webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Thorlabs FFS2000 Workstations: Filament Normalization Thorlabs 2021-11-29 | This video outlines how to normalize a filament for a Thorlabs’ Vytran FFS2000 All-in-One Fiber Preparation and Fusion Splicing Workstation.To build a complete workstation, a base unit must be purchased plus additional components (e.g. inserts, graphite V-grooves, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on house to use our FFS2000 Workstations, see our playlist on the device: youtube.com/playlist?list=PLN3i-H51ZELjFphmdXl0y2fQqZS5AyYIfFor more information on FFS2000 Workstations for splicing SM and MM fiber with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512For more information on FFS2000 Workstations for splicing SM and MM fiber with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=93220:00 Title0:26 Filament Splicing Principles0:41 Why Regular Normalization is Important0:54 Principles of Normalization Process1:27 View to Splice Distance1:50 Normalization Files and Fibers2:18 Performing Filament Normalization4:05 Iterating to Successful Normalization4:47 Indications of End of Filament Life4:59 Removing a Filament Before its End of Life.5:21 Refurbishing Filaments
How to Capture the Perfect OCT Image Thorlabs 2021-11-24 | In this webinar, Sebastian Schäfer and Steve Jäger from Thorlabs’ OCT Application Team return to demonstrate how to obtain the best image possible with an OCT system. They will also discuss additional hardware and settings to address any artifacts that may appear in your image.To view more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Thorlabs FFS2000 Workstations: Filament Install and Burn In Thorlabs 2021-11-24 | This video outlines how to remove, install and burn in a new or newly refurbished filament for a Thorlabs’ Vytran FFS2000 All-in-One Fiber Preparation and Fusion Splicing Workstation.To build a complete workstation, a base unit needs to be bought plus additional components (e.g. inserts, graphite V-grooves, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on how to operate our FFS2000 Workstations, watch our playlist: youtube.com/playlist?list=PLN3i-H51ZELjFphmdXl0y2fQqZS5AyYIfFor more information on FFS2000 Workstations for splicing SM and MM fiber with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512For more information on FFS2000 Workstations for splicing SM and MM fiber with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=93220:00 Title0:26 Filament Splicing Principles0:42 Reasons for Filament Burn In1:04 Filament Normalization Properties1:49 Removing and Replacing a Filament3:04 Performing Filament Burn In4:03 Reasons for Regular Normalization
Thorlabs FFS2000 Workstations: Recoating Thorlabs 2021-11-22 | This video outlines how to recoat fibers on a Thorlabs’ Vytran FFS2000 all-in-one Fiber Preparation and Fusion Splicing Workstation.To build a complete workstation, a base unit must be purchased plus additional components (e.g. inserts, graphite V-grooves, and recoat mold assembly) that depend on the size of the fiber being processed. We recommend contacting us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on our line of Vytran Products with recoaters, please visit: thorlabs.com/navigation.cfm?guide_id=24300:00 Title0:23 Recoating Spliced Fibers1:14 Recoat Mold1:48 Injection Port and Recoat Material2:33 Moving the Transfer Jig to the Recoat Station3:35 Injecting Recoat Material4:09 Curing4:26 Unloading the Fiber4:52 Cleaning the Recoat Mold
Thorlabs FFS2000 Workstation: Manual Splicing Thorlabs 2021-11-19 | This video outlines how to splice fibers manually using the software on a Thorlabs’ Vytran FFS2000 All-in-One Fiber Preparation and Fusion Splicing Workstation. Be sure to watch our videos on fiber stripping, cleaning, and cleaving using the FFS2000: youtube.com/playlist?list=PLN3i-H51ZELjFphmdXl0y2fQqZS5AyYIf To build a complete workstation, a base unit needs to be bought plus additional components (e.g. inserts, graphite v-grooves, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on FFS2000 Workstations for splicing SM and MM fiber with no proof tester, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with no proof tester, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512For more information on FFS2000 Workstations for splicing SM and MM fiber with proof tester, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with proof tester, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=93220:00 Title0:14 Manual Splicing Overview0:39 Splice Files and Splice Parameters2:43 Loading Fibers3:30 Aligning and Gapping Fibers4:38 Splice Only5:31 Viewing the Splice
Raster Scan Using Visual Studio® and C# Programming - Kinesis® BBD300 Series | Thorlabs Insights Thorlabs 2021-11-17 | A benefit of motorized XY stages is that they can be remotely controlled to execute a patterned scan, such as a raster scan, across a specified area. This tutorial for Thorlabs' Kinesis® software package provides step-by-step instructions for writing a program for a BBD300-series motor controller that moves the connected two-axis stage in a stepped, bidirectional raster scan pattern. The program is written using C#, the .NET framework, and the Visual Studio® development environment.This tutorial builds on the foundation established by the previously released Video Insight, Visual Studio Project Setup and C# Programming - Kinesis BBD300 Series Controller ( youtu.be/eoN1IPD7XZc ). After providing a brief overview of different raster scan patterns and approaches, this demonstration quickly reviews some of the steps included in the Visual Studio Project Setup tutorial. This includes referencing libraries, configuring the project platform, and initializing the controller's chassis and two channels.Three types of move methods are implemented. One is used to home a chosen stage axis, and another is used to move the stage to a specific position. The third implements a jog, which moves the stage along a particular axis by a specified step size. The raster scan is implemented by first moving the stage to an initial position, and then executing a series of jogs along the stage's X- and Y-axes. An example of debugging the code is shown, and the stepped, bidirectional raster scan is successfully executed.The C# code demonstrated during this video can be downloaded from Thorlabs' official GitHub account: github.com/Thorlabs/Motion_Control_Examples/blob/main/C%23/Benchtop/BBD302_Raster_Scan/Program.cs00:00 - Introduction00:24 - Raster Scan Overview and Implementation Approaches02:56 - Brief Discussion of Project Setup (Libraries, Imports)03:50 - Build Devices05:41 - Initialize Controller Chassis07:12 - Initialize, Connect, and Enable Both Channels10:10 - Encapsulate MoveTo and Home Methods10:59 - Create Jog Method11:38 - Complete all Three Move-Helper Methods 14:10 - Switch to Working on Main Body of Program18:10 - Specify Scan Direction19:44 - Code the Bidirectional Raster Scan Pattern24:11 - First Test of Code and Subsequent Debug25:05 - Successful Execution of CodeComponents used in this demonstration include:- Kinesis software package: thorlabs.com/navigation.cfm?guide_id=2191&YVI=17- Thorlabs' software download page: thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=Motion_Control&viewtab=0&YVI=17- BBD302 Two-Axis Brushless DC Motor Controller: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5066&pn=BBD302&YVI=17- MLS203-1 Fast XY Scanning Stage: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5360&pn=MLS203-1&YVI=17- MLS203P2: Slide/Petri Dish Holder for Inverted Microscopes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5360&pn=MLS203P2&YVI=17For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=17
Thorlabs FFS2000 Workstations: Loading and Unloading Fibers at the Splice Station Thorlabs 2021-11-17 | This video outlines how to load and unload fibers at the Splice Station using the transfer jig on a Thorlabs’ Vytran FFS2000 all-in-one Fiber Preparation and Fusion Splicing Workstation. Be sure to watch our videos on fiber stripping, cleaning, and cleaving using the FFS2000: youtube.com/playlist?list=PLN3i-H51ZELjFphmdXl0y2fQqZS5AyYIfTo build a complete workstation, a base unit needs to be purchased plus additional components (e.g. inserts, graphite v-grooves, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on FFS2000 Workstations for splicing SM and MM fiber with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488For more information on FFS2000 Workstations for splicing SM, MM, and PM fibers with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512For more information on FFS2000 Workstations for splicing SM and MM fiber with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510For more information on FFS2000 Workstations for splicing SM, MM, and PM fibers with proof tester, please visit:thorlabs.com/newgrouppage9.cfm?objectgroup_id=93220:00 Title0:24 Loading with Transfer Jig1:24 Splice Head1:47 Load Fibers2:12 Dropping the Transfer Jig in place3:12 Verifying Fiber Position3:43 Splice Cap and Mirror Toggle4:13 Unloading with Transfer Jig
Thorlabs FFS2000 Workstations: Setup, Power Up, and Power Down Thorlabs 2021-11-17 | This video outlines how to connect an FFS2000 to the external power supply, vacuum pump, argon cylinder, and the computer running the FFS3 software used to control the unit. Powering up and powering down the workstation are also covered. If you are unfamiliar with how to prepare an Argon gas line for your unit, please watch this tutorial: youtu.be/zWaNZUIcFb8To build a complete workstation, a base unit needs to be bought plus additional components (e.g. inserts, graphite inserts, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.For more information on FFS2000 Workstations for splicing SM and MM fiber with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512For more information on FFS2000 Workstations for splicing SM and MM fiber with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510For more information on FFS2000 Workstations for splicing SM, MM and PM fibers with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=93220:00 Title0:24 Setup, Power Up, and Power Down0:47 Communications Cables1:28 Other Connections on the Rear2:03 External Connections3:07 Power Up4:27 Power Down
Optical Fiber 101: Using Single Mode Fiber (Part 2 of 2) Thorlabs 2021-11-03 | In Part 2 of our single mode fiber series, Dave Gardner will demonstrate best practices and techniques when using SM fiber. This includes how to use this fiber as a mode filter, how to maximize coupling efficiency, and how to launch high-power light.Watch Part 1: youtube.com/watch?v=FbOXRuBQt_UFor more webinars, visit thorlabs.com/webinars.
10X Multiphoton Imaging Objective (Customer Inspired) Thorlabs 2021-11-02 | Check out this behind-the-scenes view of the genesis of Thorlabs’ TL10X-2P 10X Super Apochromatic Microscope Objective! (thorlabs.com/thorproduct.cfm?partnumber=TL10X-2P). The TL10X-2P offers excellent transmission out to 1300 nm, achieves a 0.50 NA, and provides a 7.77 mm working distance, making it an ideal choice for multiphoton imaging applications. Our Imaging Systems and Advanced Photonics groups collaborated with Dr. Spencer Smith of UC Santa Barbara to develop an objective that meets the unique needs of those working in multiphoton imaging.Visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=9895 to learn more!
Build a Polarimeter to Find Stokes Values, Polarization State (Viewer Inspired) | Thorlabs Insights Thorlabs 2021-10-20 | A polarimeter, which is an optical tool used to measure the polarization state of light, can be constructed using linear polarizers, a quarter-wave plate, and an optical power sensor and meter. This video describes two methods for building a manual polarimeter, the classical method and the rotating wave plate method, and then uses both to measure a laser beam's polarization state. [1] Both approaches provide measurement data that describe the polarization state in terms of the four Stokes parameters. This demonstration includes discussion of the relationships between the Stokes parameters and different polarization states, including linearly and circularly polarized light.In this demonstration, polarization handedness is defined with respect to time and from a perspective of looking into the beam, back towards the source. This video illustrates this convention by visualizing a fixed viewing plane oriented perpendicular to the propagating beam. As the beam passes through the plane, the beam's instantaneous polarization vector traces out a shape on the plane. The shape is traced out as a function of time, and the direction in which the shape is traced corresponds to the handedness of the light. The shape itself is the polarization ellipse, which is a convenient and common way to describe light's polarization state. The relationship between the polarization ellipse and the Stokes parameters is also discussed.Prior to filming, the transmission axes of the linear polarizers and wave plate used to build these polarimeters were oriented with respect to the table. The following are links to Video Insights demonstrating the described alignment procedures:- Align a linear polarizer horizonal or vertical with respect to the table: youtu.be/W9pALZ5Z8ms - Align a linear polarizer at 45° with respect to the table: youtu.be/cqLPD5dL9zY - Align a wave plate's axis to be horizontal with respect to the table: youtu.be/P0asuzX4x-Q - Determine whether a wave plate's axis is fast or slow: youtu.be/XQwiPm5OtSk [1] Beth Schaefer, Edward Collett, Robert Smyth, Daniel Barrett, and Beth Fraher "Measuring the Stokes polarization parameters," Am. J. Phys. 75, 163-168 (2007).00:00 - Introduction00:42 - Stokes Parameters 02:55- Polarization State and Handedness03:26 -Polarization Ellipse03:53 - Classical Stokes Parameter Measurement 08:55 - Rotating Quarter Wave-Plate MethodComponents used in this demonstration include:- HeNe Lasers: thorlabs.com/navigation.cfm?guide_id=125&YVI=16- Optical Isolator: thorlabs.com/newgrouppage9.cfm?objectgroup_ID=2996&YVI=16- Linear Polarizers: thorlabs.com/navigation.cfm?guide_id=2459&YVI=16 - PRM1 Rotation Mount: thorlabs.com/newgrouppage9.cfm?objectgroup_id=990&pn=PRM1&YVI=16 - Wave Plates: thorlabs.com/navigation.cfm?guide_id=23&YVI=16 - WPMQ05M-633 Quarter-Wave Plate: thorlabs.com/newgrouppage9.cfm?objectgroup_id=713&pn=WPMQ05M-633&YVI=16 - RSPC Fixed Position Retainer: thorlabs.com/newgrouppage9.cfm?objectgroup_id=47&pn=RSPC&YVI=16 - SM1D12D Iris: thorlabs.com/newgrouppage9.cfm?objectgroup_id=1479&pn=SM1D12D&YVI=16 - SM1L20 Lens Tube: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3307&pn=SM1L20&YVI=16 - SM1QA Quick-Release Lens Tube Adapter: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3758&pn=SM1QA&YVI=16- S130C Power Sensor: thorlabs.com/newgrouppage9.cfm?objectgroup_id=3328&pn=S130C&YVI=16 - PM400 Power Meter: thorlabs.com/newgrouppage9.cfm?objectgroup_id=10562&pn=PM400&YVI=16For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=16
Profiling Beam Shape and Waist Laser Science Thorlabs 2021-10-13 | The third installment of our light characterization series discusses how to measure key parameters of a beam, how the M2 factor is related to beam quality, and what methods can be used to characterize beams.For more webinars, visit thorlabs.com/webinars.
Using Phase-Sensitive Spectral Domain OCT for Nanoscale Vibrometry Thorlabs 2021-10-07 | In this webinar, Drs. Elizabeth Olson and C. Elliott Strimbu will discuss the role of cochlear dynamics in auditory science and highlight the need for phase-sensitive and depth-resolved imaging in this field. They will demonstrate the performance parameters of a Thorlabs Telesto OCT system, and elaborate on key findings from multiple case studies.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Visual Studio® Project Setup and C# Programming - Kinesis® BBD300 Series | Thorlabs Insights Thorlabs 2021-09-23 | Starting a program and initializing connected devices can be one of the largest hurdles to writing code that remotely controls a device. This tutorial for Thorlabs' Kinesis® software package provides step-by-step instructions for using C# and the .NET framework to create a new Visual Studio® project and initialize connected devices, which in this case is a BBD300 series motor controller connected to a two-axis stage. A basic move sequence is then added to the program and used to test the execution of the code.The demonstration begins with instructions for creating a new Visual Studio project and adding the required dynamic link libraries (DLLs). In this example there is one connected controller, and the program is written to execute its two-step initialization process, since the controller's chassis and channels must be initialized individually. Each channel corresponds to a different stage axis, and this program initializes one of the controller's two channels (axes). Custom velocity and position settings are specified for the move command, and instructions are included to perform the disconnect shutdown sequence after the move sequence is completed. Try-catch blocks are added to the code to provide instructions to the program in the case that an error is thrown by a method. Command and position status information is made available to the user, and status messages are printed to the PC's console screen.The C# code demonstrated during this video can be downloaded from Thorlabs' official GitHub account: github.com/Thorlabs/Motion_Control_Examples/blob/main/C%23/Benchtop/BBD302_Init_Move/Program.csThese steps are used as the foundation of a program described in another Video Insight (youtu.be/CoDlTOEo-4w) that executes a stepped, bidirectional raster scan using the same controller and XY stage.00:00 - Introduction00:43 - Create New Visual Studio Project01:56 - Add Kinesis DLLs to the Project02:47 - Check the Operation of the Build So Far03:32 - Add C-Based Dependencies 04:27 - Load and Make Accessible the Available Controllers05:39 - Confirm and Filter the Connected Devices07:27 - Check the Operation of the Build So Far07:44 - Initialize the Controller's Chassis09:45 - Initialize one of the Controller's Channels12:21 - Make Position and Status Information Available13:01 - Enable the Stage13:23 - Create Example Home Stage Method16:14 - Create Example Move Stage Method18:22 - Adjust Velocity and Acceleration Settings19:15 - Specify Move and Disconnect Sequence20:33 - Execute the Code as a TestComponents used in this demonstration include:- Kinesis software package: thorlabs.com/navigation.cfm?guide_id=2191&YVI=15- Thorlabs' software download page: thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=Motion_Control&viewtab=0&YVI=15- BBD302 Two-Axis Brushless DC Motor Controller: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5066&pn=BBD302&YVI=15- MLS203-1 Fast XY Scanning Stage: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5360&pn=MLS203-1&YVI=15- MLS203P2: Slide/Petri Dish Holder for Inverted Microscopes: thorlabs.com/newgrouppage9.cfm?objectgroup_id=5360&pn=MLS203P2&YVI=15For more photonics how-to videos, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=15
A Year of Video Insights - Help Direct Season Two! Thorlabs 2021-09-17 | Video Insights first went live a year ago! Would you help direct Season Two? Tell us how to make our videos more useful to you.We'd definitely love to know:-What topics would interest you, and which products would you like included in the demonstrations?-Are our engineers showing everything you need to see?-Should we show common mistakes along with our approach, even if it makes the video longer?-What do you think of the background info we've been including?-How's the video length in general? Anything you'd like to see cut or added?We'd love answers to these questions as well as any and all additional comments on the videos! And, we hope you continue watching, here or at thorlabs.com/newgrouppage9.cfm?objectgroup_id=14062&YVI=TR1 - there are two new videos in development right now!
Optical Fiber 101: Understanding Single Mode Fiber (Part 1 of 2) Thorlabs 2021-09-16 | In this webinar, Dave will discuss how single mode fibers operate and offer practical tips for working with this type of fiber, including alignment, launching, mode filtering, and power handling.Watch Part 2: youtube.com/watch?v=HvJeXakc8KcFor more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
Advanced Imaging Techniques for Laser Scanning Systems Thorlabs 2021-09-09 | The fifth installment of our How to Build a Microscope series will discuss advanced imaging techniques that can be used to enhance laser scanning microscopy.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.
GPX Glass Processing Application – Fiber Bundle Thorlabs 2021-08-27 | In this video, we will demonstrate how to make a fiber bundle using a Thorlabs Vytran GPX Glass Processing System. For more information on Glass Processing Systems, please visitthorlabs.com/newgrouppage9.cfm?objectgroup_id=9326orthorlabs.com/newgrouppage9.cfm?objectgroup_ID=9366For more detail on tapering fibers and other glass components using GPX please visityoutube.com/watch?v=c0NP0F_VuBs&list=PLN3i-H51ZELgho1cjXyFoLJyhjUy6VphK&index=3For more detail on cleaving using LDC Large Diameter Cleavers, please visityoutube.com/watch?v=_mEMlYUCYfs&list=PLN3i-H51ZELhGQFBFnVNXZX_pUkNItXn8&index=50:00 Introduction to Fiber Bundles1:54 Bundle Parameters3:28 Pre-Tapering the Capillary Tube4:15 Bundling Fibers and Inserting into Capillary Tube5:54 Tapering the Bundle7:06 Cleaving the Bundle
Processing and Shaping Optical Fiber Thorlabs 2021-08-26 | In this webinar, Michael will discuss the intrinsic characteristics of fiber and how different fibers can be processed. He will also demonstrate glass processing procedures, such as splicing multicore fibers and lensing fiber tips.For more webinars, visit thorlabs.com/newgrouppage9.cfm?objectgroup_id=13891.0:00 Introduction2:47 What is Fiber Processing3:20 Key Fiber Processing Requirements (Capabilities)6:57 Fiber Control and Feedback Mechanisms9:03 Soft Glass Fiber19:13 Multi Core Fiber24:06 Structured Core Fiber40:20 Lensed Fiber46:54 Questions
Splicing Polarization Maintaining (PM) Fiber Thorlabs 2021-08-17 | This video outlines some of the features of Polarization Maintaining (PM) fiber and how to splice PM fiber using Thorlabs Vytran equipment such as the GPX Glass Processor, LFS Large Fiber Splicer and the FFS2000 all-in-one Fiber Preparation and Fusion Splicing Workstation.For more information on GPX Glass Processors and Large Diameter Splicers please visit:• GPX and LFS Splicing Video- youtube.com/watch?v=6BuIZy3iYoM&list=PLN3i-H51ZELjNhudOExN7d3QSA85mIGvv&index=11 • Glass Processor- thorlabs.com/newgrouppage9.cfm?objectgroup_id=9326• Glass Processors with Integrated Cleaver-thorlabs.com/newgrouppage9.cfm?objectgroup_id=9366• LFS Large Fiber Splicer- thorlabs.com/newgrouppage9.cfm?objectgroup_id=9355For more information on FFS2000 Workstations for splicing SM, MM and PM fibers, please visit:• FFS2000 Splicing Video- youtube.com/watch?v=R9pJ1lINTMI&list=PLN3i-H51ZELjFphmdXl0y2fQqZS5AyYIf&index=12 • FFS2000 Workstation without Proof Tester- thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512• FFS2000 Workstation with Proof Tester- thorlabs.com/newgrouppage9.cfm?objectgroup_id=9322For more information on the FFS3 GUI and using the Measurement Guide in the View Menu, please visit: • youtube.com/watch?v=IQouucgv2s4&list=PLN3i-H51ZELiwmWgP1o4mMqNhNHWKtsFP&index=20:00 Introduction to Polarization Maintaining Splicing0:58 PM Stress Members2:01 Alignment and Parameters4:27 Aligning in Side View5:14 Rotational Alignment6:19 Gaping and Realignment in Side View6:53 PM Splice7:45 Machine Differences8:15 One Button Splicing
