Nintendo GAME MAN. The only one in existence.Grumpy RC Modeler2020-11-28 | A brief video showing my Nintendo GAME MAN in action.
Link to make your own: cults3d.com/en/3d-model/game/nintendo-game-man-oversize-game-boy-famicom-hackMGB GT idleGrumpy RC Modeler2024-10-10 | A new noise started in the front of the engine. yeaterday. It was only the fan rattling a little on the bushings. I added some washers to tighten it up and it sounds so good now. Nice low idle and great oil pressure.MGB after engine work.Grumpy RC Modeler2024-10-07 | Final tuning after valve lash adjustment. Runs well.Breaking in the new camshaft on my 1966 MGB GTGrumpy RC Modeler2024-10-07 | I just finished a lto of engine and gearbox work and here I'm running the engine at 2500 rpm to break in the new camshaft. I didn't replace piston rings so I don't need to do any more break in than that.MGB Roadster RC Car - 3D Printed Chassis - Kyosho Nostalgic BodyGrumpy RC Modeler2024-07-20 | My new 1/10 touring car body is this MGB Roadster. The green is Tamiya PS22 "Racing Green" and the chrome is chrome vinyl for wrapping cars. Works great to achieve a chrome effect on model parts.
The body is a reproduction of the Kyosho Nostalgic series MGB that I bought from TeamBlueGroove. Remember to buy the accessories and windshield if you order from them.Just a short clip of my MGB engine idling after adjusting the valve clearances.Grumpy RC Modeler2024-06-16 | ...Cruising with my 1966 MGB GTGrumpy RC Modeler2024-04-26 | A video of my 1966 MGB GT It's not fast but it's fun and handles well.Ferrari 250 GTO - 1/10 Scale Touring CarGrumpy RC Modeler2024-03-23 | This is by far the most beautiful RC car I've even seen. It looks amazing in motion as well. I'm definitely getting another body when they come back for sale.
The chassis is the exact same 3D printed chassis I used on the Cosworth in the other videos. The wire wheels are 3D-printed.Tromsø in Microsoft Flight SimulatorGrumpy RC Modeler2024-03-10 | ...Team C Ford Sierra RS500 body on 3D printed touring chassis.Grumpy RC Modeler2024-02-24 | ...This is how my 10 year old grumpy cat tells me she deserves more treats.Grumpy RC Modeler2024-02-14 | ...Normal Arctic weather.Grumpy RC Modeler2024-02-02 | ...Short clip of my Sierra RS500 RC carGrumpy RC Modeler2024-01-27 | Just a short clip from some driving today. I want a real Cosworth. RS500 is unattainable, and I wouldn't want a RHD car anyway.Quick video from todays track day.Grumpy RC Modeler2023-12-29 | Just me driving the old FWD touring car. The parts are up on Cults now for those that want to explore the design. No support will be provided for this one at the moment. It's running with a 35 turn brushed motor and 7,2 V Ni-Mh battery. cults3d.com/en/3d-model/various/fwd-touring-car-betaRecording of PCVR Red Matter 2 from my Pico 4 - Warning: early basic puzzle spoilerGrumpy RC Modeler2023-10-29 | Flawless wireless VR performance using a cheap used WIFI 6 router.
System specs: Motherboard: ASRock B550M-HDV CPU: Ryzen 5 3600 GPU: HP RTX 3080TI RAM: 32 GB 3600 C18 DDR4 WIFI: Archer AX10 AX 1500 Wi-Fi 6GQuakeQuest running on Pico 4 with chunky texturesGrumpy RC Modeler2023-10-17 | Playing Quake in VR is surprisingly fun. The Pico 4 GPU runs the game super smoothly at high resolution 90 FPS. The recording is 30 FPS but the game is perfectly smooth in the headset.
I added an "autoexec.cfg" file in the ID1 folder with gl_texturemode GL_NEAREST in it to make it look more like good old software mode.Worst landings ever - I almost wrecked my 3D printed EL-39 jet todayGrumpy RC Modeler2023-09-30 | I'm not a great pilot any more but today had very difficult winds. The airspeed seemed to change drastically when I descended beyong the tree tops and it made things extra squirrely... at least it gave me something to blame.Three short september flights with EL-39 at Senja Model Airplane Club NorwayGrumpy RC Modeler2023-09-29 | Three shorts flights. I didn't feel like flying longer per flight. The second flight was cut short because of a technical failure but I had an extra part in my case.I went flying today with my little F-16Grumpy RC Modeler2023-09-24 | Flew two little flights with my F-16 today. The weather is rarely this accommodating now.Another long flight with my custom Freewing 70 mm F-16Grumpy RC Modeler2023-09-15 | ...September EL-39 flight.Grumpy RC Modeler2023-09-15 | Haven't flown in a while but was convinced to drive out to fly today. Weather was great.EL-39 120 mm 3D-printed Jet - High capacity battery test - Molicel P45BGrumpy RC Modeler2023-08-31 | Testing a Molicel P45B 12S2P 9000 mAh li-ion battery I made. The duration is pretty ridiculous. Way longer than I need to fly.
The usual 12S 5000 mAh lipo I use weighs 1416 g. The new 12S2P 9000 mAh li-ion weighs 1859 g.Ultra light 3D-printed 1:32 scale L-100 Hercules model in perfectly wtill airGrumpy RC Modeler2023-08-31 | Perfect conditions for the light HerculesTwo more EL-39 flights from tonight.Grumpy RC Modeler2023-08-30 | It sounds great.Long duration flight with my Freewing 70 mm F-16 - Almost 8 minutesGrumpy RC Modeler2023-08-28 | This plane has great duration with the Molicel battery. 8 minutes of normal flying... which is actually too long for my taste so I might change to a slightly higher kv motor to get a slight performance upgrade instead of crazy duration. I can probably fly for 15 minutes if I only do cruise, but that's too boring to try.Finally a good flight again with my EL-39Grumpy RC Modeler2023-08-28 | I haven't had a good flight with an EL-39 since I lost my other one last year. This time it went well.Practicing landing, badly, with my old EL-39.Grumpy RC Modeler2023-08-27 | Struggling to fly it well but at least it's in one piece after two battery charges.
It's the same one I flew a few years ago and then sold to a friend. I bought it back since I crashed my new EL-39 last year.My new F-16 is awesome!Grumpy RC Modeler2023-08-25 | Trying to see how long I can safely fly it. It's got lots of power compared to my old one and really long flight times. This 6 minute flight spent just 2799 mAh of the 4500 mAh battery. I can probably fly up to 8 minutes like this.
I damaged the nose retract trunnion on the first flight becuse it was very gusty so it was slightly loose but it was useable which is why it's kind of floppy and swinging back and forth while taxiing.Warm up flight before I maiden another F-16.Grumpy RC Modeler2023-08-24 | The first flight this evening. Just checking how it feels to fly today with this flight.Maiden flight of a Freewing 70 mm F-16 with all moving elevatorsGrumpy RC Modeler2023-08-24 | My friend gave me a wreck full of repairs, dents, cracks and damage so I fixed it up over the past couple of weeks and designed custom all moving elevators for it. It flew great.
The elevators, EDF, nose gear and ventral fins are 3D-printed. The intake duct has been opened up a lot and the nose gear retract has been lowered to improve airflow. I also removed the center section of the carbon wing spar that blocks airflow in the duct and cleaned up the rudder linkage to reduce drag there as well.Evening flight with my little F-16.Grumpy RC Modeler2023-08-20 | The first flight of the evening. Nailed the landing.Im sick of RC planes so I flew an RC plane.Grumpy RC Modeler2023-08-13 | It's a tough job but someone has to do it.Cruising around and then a stupid landing.Grumpy RC Modeler2023-07-23 | Time to go home after that.A fun flight with my little F-35 tonight.Grumpy RC Modeler2023-07-22 | This plane is still nice. Very smooth.My friend flying his (my old) Gleichauf 1:8 scale F-16Grumpy RC Modeler2023-07-22 | It flies better in his hands.LX F-35Grumpy RC Modeler2023-07-20 | Sorry for the minimal editing effort. It's my latest flight with the plane earlier this month. Maybe I'll get back to flying again soon. I got really sick of it.Pilot RC J10-B - Practice flightsGrumpy RC Modeler2023-07-06 | My friend getting used to his big J10-B at our small field.Giving the VQ Hornet a go again. Still junk.Grumpy RC Modeler2023-06-30 | I hate this plane and don't have the conscience to sell it.
I will never buy another VQ and never buy another plane with that awful vinyl covering if I can help it.1:32 scale L-100 Hercules - Ultra lightweight 3D printed RC modelGrumpy RC Modeler2023-06-21 | A flight form last night with my light Hercules. Compare to the flight with my AC-130A to see what a difference 500 g of weight makes.Ultra light Nucking Futs - Printed from LW-PLAGrumpy RC Modeler2023-06-20 | 220 g AUW1:6 scale Ov-10 Bronco - Modified Uravitch plan built BroncoGrumpy RC Modeler2023-06-18 | I took my Bronco out again tonight. The nose gear still won't retract against the headwind after I added a spring to help it. Time to just upgrade the retract unit to something stronger.Short flight with my little AC-130A Hercules gunship.Grumpy RC Modeler2023-06-18 | My other Hercules. This one is heavy so flies faster than my white Lockheed L-100 but looks so good.
This little plane was printed from PCTG to test if it's a viable material for sun exposure. The black flat finish stood in direct sunlight (25°C in the shade) without issue.Hairy landings with my little Freewing 70 mm F-16Grumpy RC Modeler2023-06-16 | This plane is great. Here's me having fun doing some crazy landings.Lightened and modified LX F-35AGrumpy RC Modeler2023-06-12 | First flight this year with my F-35. It's not fast but has a pretty good climb rate. The EDF is a 3D printed 75 mm unit.First flight of 2023 - Freewing 70 mm F-16Grumpy RC Modeler2023-06-12 | I started late this year. Weather has been awful and I spent the time refurbishing my new hangar-van instead. I haven't really felt a strong urge to fly anyway.
I didn't feel rusty and it was no problem getting into it again.LEGO Technic 8860 converted to RCGrumpy RC Modeler2023-04-21 | I designed a 3D printable conversion set fto make my old LEGO car (from 1980) RC without any of the RC parts obviously visible. I dreamt of making it RC when I was a kid.
Great game. gives you a light workout, especially if you're unfit and really need it, like me.Hellsplit: Arena is pretty great.Grumpy RC Modeler2023-03-04 | Hellsplit: Arena is a pretty great single player VR game. Great graphics and not too demanding on the hardware. No problem with my RTX 3070 and Pico 4 on highest resolution and highest settings. As you can see hitting high 70% GPU use at 72 FPS.
Sorry about the stuttery recording. It's smooth in real gameplay. This is just the recording made by the goggles.Pico 4 screen recording - Half Life-Alyx- Ultra Settings - Nvidia GTX 1080Grumpy RC Modeler2023-01-02 | No problems running at ultra settings in Alyx so far in the game. Dips slightly below 90.
My 12 year old VR computer (except for the GPU which is "only" 5 years old): Gigabyte X58 LGA 1366 motherboard Xeon X5690 CPU overclocked to 4.25 GHz Nvidia GTX 1080 GPU 24 GB DDR3 1600 RAM Ethernet to a WIFI5 router for wireless connection to VR headset
There is no visible compression artifacts while gaming. This recording is only 8 mbps while the actual in headset image is higer resolution and higher bitrate (72 mbps h.265).I can finally play Doom Eternal on my Amiga!Grumpy RC Modeler2022-12-01 | Booting up and playing Doom Eternal on my Amiga 5600.
It's a custom 3D printed case of my design that has room for an ITX motherboard and a short GPU. My specs are: ASRock Fatal1ty B450 Gaming-ITX/ac motherboard Ryzen 5 5600G CPU 32 GB 3600 MHz DDR4 ram Gigabyte GTX 1070 ITX GPU Working floppy drive Blu-Ray optical drive 450 W external SFX PSU