Fusion 360 Tutorial for Absolute Beginners (2020) @ProductDesignOnline

Product Design Online Join our updated Fusion Masterclass 👉 bit.ly/PDOMasterclass
Learn Fusion 360, without any prior experience, with this free mini-course for absolute beginners! Unlike most Fusion 360 beginner tutorials, this tutorial features the brand new UI and is up to date with the 2020 Fusion 360.

By the end of this tutorial, you'll have created your very own customizable and 3D-printable stamp in Fusion 360.

Here are 5 tips for Fusion 360 Beginners:
1. Save your file right away!
2. Create new "components" for each part
3. Keep sketches as simple as possible
4. Use construction lines
5. Be creative - try things out...you can always hit undo!

**Support our free tutorials**
PayPal - paypal.com/paypalme/productdesignonline/20
Patreon - patreon.com/productdesignonline
Say Thanks w/Coffee - buymeacoffee.com/pdo

**Tutorial Resources**
1. Resource page - https://ProductDesignOnline.com/16
2. Checklist for F360 beginners: http://bit.ly/f360checklist

**Top Fusion 360 Playlists**
30 Days Series (latest) - bit.ly/30DaysV2
Woodworkers - http://bit.ly/woodworker-playlist
3D Printing - http://bit.ly/3D-printing-playlist
Sculpting - http://bit.ly/sculpt-playlist

Products I recommend (some are affiliate links to support the channel!):
**3D Printing**
Bambu X1C - bit.ly/BambuX1C
Bambu AMS - bit.ly/BambuAMS
Bambu P1S - bit.ly/BambuP1S
Bambu A1 Mini - bit.ly/BambuA1Min
Bambu Filament - bit.ly/BambuPla

Product Design Online links:
━━━━━━━━━━━━━
PDO Website: productdesignonline.com
PDO Academy: bit.ly/PDOAcademy
Fusion beginners PDF: http://bit.ly/f360checklist
Fusion hotkeys PDF: bit.ly/F360Hotkeys

0:00 - Fusion 360 for Absolute Beginners
1:30 - Creating a new project folder
3:00 - Creating a new component
5:16 - Sketching the reusable stamp plate
8:01 - Extruding the reusable stamp plate
9:49 - Inserting your custom SVG logo
13:37 - Creating the handle component
16:50 - Projecting the base of the handle
19:07 - Creating the offset (tolerance)
21:30 - Extruding the handle part
23:09 - Creating the top of the handle
26:37 - Adding fillets to the handle
28:37 - Exporting for 3D printing

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.

#Fusion360 #ProductDesignOnline #3dprinting

updated 5 years ago

Fusion 360 Tutorial for Absolute Beginners (2020)

Product Design Online 2019-09-07 | Join our updated Fusion Masterclass 👉 bit.ly/PDOMasterclass
Learn Fusion 360, without any prior experience, with this free mini-course for absolute beginners! Unlike most Fusion 360 beginner tutorials, this tutorial features the brand new UI and is up to date with the 2020 Fusion 360.

By the end of this tutorial, you'll have created your very own customizable and 3D-printable stamp in Fusion 360.

Here are 5 tips for Fusion 360 Beginners:
1. Save your file right away!
2. Create new "components" for each part
3. Keep sketches as simple as possible
4. Use construction lines
5. Be creative - try things out...you can always hit undo!

**Support our free tutorials**
PayPal - paypal.com/paypalme/productdesignonline/20
Patreon - patreon.com/productdesignonline
Say Thanks w/Coffee - buymeacoffee.com/pdo

**Tutorial Resources**
1. Resource page - https://ProductDesignOnline.com/16
2. Checklist for F360 beginners: http://bit.ly/f360checklist

**Top Fusion 360 Playlists**
30 Days Series (latest) - bit.ly/30DaysV2
Woodworkers - http://bit.ly/woodworker-playlist
3D Printing - http://bit.ly/3D-printing-playlist
Sculpting - http://bit.ly/sculpt-playlist

Products I recommend (some are affiliate links to support the channel!):
**3D Printing**
Bambu X1C - bit.ly/BambuX1C
Bambu AMS - bit.ly/BambuAMS
Bambu P1S - bit.ly/BambuP1S
Bambu A1 Mini - bit.ly/BambuA1Min
Bambu Filament - bit.ly/BambuPla

Product Design Online links:
━━━━━━━━━━━━━
PDO Website: productdesignonline.com
PDO Academy: bit.ly/PDOAcademy
Fusion beginners PDF: http://bit.ly/f360checklist
Fusion hotkeys PDF: bit.ly/F360Hotkeys

0:00 - Fusion 360 for Absolute Beginners
1:30 - Creating a new project folder
3:00 - Creating a new component
5:16 - Sketching the reusable stamp plate
8:01 - Extruding the reusable stamp plate
9:49 - Inserting your custom SVG logo
13:37 - Creating the handle component
16:50 - Projecting the base of the handle
19:07 - Creating the offset (tolerance)
21:30 - Extruding the handle part
23:09 - Creating the top of the handle
26:37 - Adding fillets to the handle
28:37 - Exporting for 3D printing

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.

#Fusion360 #ProductDesignOnline #3dprinting

Basics of Sheet Metal Tools in Fusion 360 | Day 24 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2024-02-16 | Learn how to design basic sheet metal goods in Autodesk Fusion. We'll discuss using the Flange tool, creating and updating Flat Patterns, sheet metal components, sheet metal rules, and so much more!

New to Fusion 360? This is a brand new 2023 version of Day #24 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!

Height Datum and Bend Position info ➞ productdesignonline.com/d24
Learn faster ➞ productdesignonline.com/courses

I recommend both @fabworks and @sendcutsend for your sheet metal projects.

SUPPORT KEVIN'S TUTORIALS
Donate $10 ➞ paypal.com/paypalme/productdesignonline/10
Patreon ➞ patreon.com/productdesignonline
Single Donation ➞ buymeacoffee.com/pdo

TIMESTAMPS
00:00 - Intro to Autodesk Fusion Sheet Metal features
00:29 - Standard vs Sheet Metal Components in Autodesk Fusion
01:32 - Creating a sketch for the base flange in Autodesk Fusion
02:48 - Creating the side flanges for the napkin holder
03:27 - Height Datum and Bend Position in Autodesk Fusion
05:10 - Creating Full Round Fillets that are future-proof
06:03 - How to create a flat pattern in Autodesk Fusion 360
07:21 - Creating the inner slot detail
08:29 - Preparing the sheet metal part for powder-coating
09:16 - Creating a sheet metal rule in Autodesk Fusion 360
10:33 - Changing the thickness of the sheet metal part in Fusion
11:15 - Updating the flat pattern in Autodesk Fusion
11:27 - Exporting your sheet metal design in Autodesk Fusion

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #cad #autodesk #metal #sheetmetals

How to use Joints in Autodesk Fusion | Day 23 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2024-02-02 | Learn how to assemble designs in Autodesk Fusion. We'll discuss using the As-Built Joint command to create joints and motion with designs that are built in place, including imported designs. This demo uses the 06_tripod demo file included with your Autodesk Fusion install.

New to Fusion 360? This is a brand new 2023 version of Day #23 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!

Resource Page ➞ productdesignonline.com/d23
Full course on YouTube: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

SUPPORT KEVIN'S TUTORIALS
Donate $10 ➞ paypal.com/paypalme/productdesignonline/10
Patreon ➞ patreon.com/productdesignonline
Single Donation ➞ buymeacoffee.com/pdo

TIMESTAMPS
00:00 - Intro to Joints and Assemblies in Autodesk Fusion
00:15 - Open and Save the Tripod Demo file from the Data Panel
01:25 - Mates equivalent in Autodesk Fusion 360
01:43 - Common Assembly approaches in Autodesk Fusion
03:40 - Joints vs As-Built Joints in Autodesk Fusion
04:21 - Creating the first As-Built Joint on the tripod leg
05:36 - Defining Joint Motion Limits in Autodesk Fusion
06:45 - Joints with copied parts in Autodesk Fusion
08:06 - Adding the remaining Joints to the tripod legs and stand
10:44 - Creating a Ball Joint in Autodesk Fusion 360
11:23 - Testing your Joint motion in Autodesk Fusion

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #cad #autodesk

Two-Part Molds in Autodesk Fusion 360 | Day 22 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2024-01-26 | Learn how to create two-part 3D printable molds in Autodesk Fusion. We'll discuss designing with parting lines, registration marks, clearances, and more.

New to Fusion 360? This is a brand new 2023 version of Day #22 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!

Resource Page ➞ productdesignonline.com/d22
Full course on YouTube: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline
Single Donation ➞ buymeacoffee.com/pdo

TIMESTAMPS
00:00 - 3D Printable Two-Part Molds in Autodesk Fusion 2024
00:15 - What is a mold parting line?
00:48 - Adjusting the design to be on a symmetry line
02:17 - Creating the Mold Box component and 3D body
03:12 - Subtracting the chess pieces from the mold box
03:45 - Creating the parting line with the Split Body command
04:33 - Creating Registration Marks positive side
06:11 - Creating Registration Marks negative side
07:07 - Add clearance to the registration marks
07:50 - Adding chamfers to the outside edges
08:05 - Additional tips to consider when making two-part molds

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #3dprinting #autodesk

3D Printable One-Part Molds | Day 21 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2024-01-12 | Learn how to create one-part 3D printable molds in Autodesk Fusion. We'll discuss designing with a draft angle in mind, mirroring the hinges, and much more.

New to Fusion 360? This is a brand new 2023 version of Day #21 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!

Resource Page ➞ productdesignonline.com/d21
Full course on YouTube: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - 3D Printable One-Part Mold in Autodesk Fusion
00:25 - Creating the keychain body for the mold
01:03 - Adding a Hole for the keychain
02:10 - Adding text or a custom design to your keychain
03:00 - Creating a one-part mold component in Autodesk Fusion
04:00 - Using the Combine command to cut the mold body
04:35 - Adding a Draft to the mold in Autodesk Fusion
06:19 - Export design as STL in Autodesk Fusion

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #3dprinting

Design 3D Printable Hinges | Day 20 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2023-12-15 | Learn how to create 3D printable hinges on our parametric box from Day 19. These simple and easy-to-print hinges can be scaled and modified to adapt any 3D print design! We'll discuss designing with a clearance in mind, mirroring the hinges, and much more.

New to Fusion 360? This is a brand new 2023 version of Day #20 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Resource Page ➞ productdesignonline.com/d20
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - 3D Printable Hinges in Autodesk Fusion
00:18 - Deleting the Joint and creating a new one
02:04 - Creating the hinge side profile
03:20 - Creating the hinge's inner hinge pin (nub)
04:15 - Creating the inner hinge
06:03 - Creating a clearance between the hinges
06:35 - Removing the hinge pin (nub) from the inner hinge
07:03 - Adding clearance to the inner hinge
07:47 - Mirroring the Hinge to the other side
08:45 - Exporting STL from Autodesk Fusion

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #3dprinting

Intro to User Parameters and Joints | Day 19 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2023-09-29 | Learn how to create dynamic 3D models by leveraging User Parameters in Fusion 360. Today, we'll create a simple yet powerful parametric box. This box will then be used on day 20 as we add 3D printable hinges.

New to Fusion 360? This is a brand new 2023 version of Day #19 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet!

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Resource Page ➞ productdesignonline.com/d19
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - User Parameters in Autodesk Fusion 360 Explained
00:11 - What are User Parameters in Fusion 360
00:32 - Create new User Parameters in Fusion 360
01:55 - Call User Parameters in Fusion 360 Sketch Dimensions
02:45 - Create Parameters on the Fly in Fusion 360
03:20 - Testing User Parameters in Fusion 360
04:21 - Copy and Paste New component in Fusion 360
05:14 - How to use the Joint command in Fusion 360
06:48 - Day 20 Next Lesson

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Convert STL to Solid in Fusion 360 | Day 18 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2023-09-23 | Learn how to Convert STL Mesh files to Solid Bodies in Fusion 360, allowing you to customize or alter your downloaded STL file.
New to Fusion 360? This is a brand new 2023 version of Day #18 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet!

Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

DEMO FILE ➞ productdesignonline.com/d18
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist
$50 off Fusion 360 Subscription: http://aklam.io/cUdTJq

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Convert STL to Solid in Fusion 360 Core Workflow
00:15 - Key Terminology explained
01:12 - Insert Mesh in Fusion 360
02:07 - How to Use the Convert Mesh tool in Fusion 360
04:42 - Generate Face Groups in Fusion 360
05:44 - Fusion 360 Convert Mesh Prismatic explained
07:43 - Tops to Convert STL Mesh files in Autodesk Fusion 360
08:36 - Watch the next lesson Day 19

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

All 12 Fusion 360 Sketch Constraints | Day 17 of Learn Fusion 360 in 30 Days - 2023 EDITION

Product Design Online 2023-09-15 | New to Fusion 360? This is a brand new 2023 version of Day #17 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet!
Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Learn how to use all 12 of Autodesk Fusion 360's Sketch Constraints. Sketch constraints are a critical concept in making parametric designs that are adaptable and manageable.

DEMO FILE ➞ productdesignonline.com/d17
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist
$50 off Fusion 360 Subscription: http://aklam.io/cUdTJq

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 17 Learn Sketch Constraints in Fusion 360
00:15 - Fusion 360 Sketch Constraints overview
01:20 - Horizontal and Vertical sketch constraint in Autodesk Fusion 360
02:13 - Coincident sketch constraint in Autodesk Fusion 360
03:04 - Tangent sketch constraint in Autodesk Fusion 360
03:40 - Equal sketch constraint in Autodesk Fusion 360
04:22 - Parallel sketch constraint in Autodesk Fusion 360
04:45 - Perpendicular sketch constraint in Autodesk Fusion 360
05:20 - Fix and Unfix sketch constraint in Autodesk Fusion 360
05:51 - Midpoint sketch constraint in Autodesk Fusion 360
06:46 - Concentric sketch constraint in Autodesk Fusion 360
07:09 - Collinear sketch constraint in Autodesk Fusion 360
07:33 - Symmetry sketch constraint in Autodesk Fusion 360
08:08 - Curvature sketch constraint in Autodesk Fusion 360
09:16 - Tips for Fusion 360 Sketch Constraints

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

You can now order parts inside Fusion 360

Product Design Online 2023-07-17 | Thanks to Xometry for sponsoring this video! Get $25 OFF your Xometry order of $150 or more: http://xometry.com/PDO

Xometry's Fusion 360 add-in makes it super easy to get instant quotes without ever leaving Fusion 360. With many manufacturing methods, 100s of materials and finish types, it's never been more accessible and affordable to order prototypes or production-ready parts for your next project.

The Xometry add-in also provides real-time Design for Manufacturing (DFM) feedback based on your selected process and material. Quickly refine your design and resubmit to get new estimates and to finalize ideas based on your project's budget, lead time, and other requirements.

* Good through 7/31/23. Only for orders of $150 or more.

00:00 - Xometry Fusion 360 Add-in Instructions
00:29 - Download and Install the Xometry Fusion 360 Add-in
00:45 - Activate Xometry Add-in in Autodesk Fusion 360
01:28 - Select the desired parts in the Fusion 360 Browser
02:03 - Choose your Process, Material, and Finish
02:18 - Review the Estimate and Lead Time per the selected parts
02:53 - Review the DFM Feedback for each part
04:00 - Sync design changes to get updated estimates
05:11 - Fusion 360 users receive 10% off for limited time
05:17 - Finalize and order your parts with Xometry
05:28 - Results of 3D Printed Wrench Concepts

#fusion360 #productdesignonline #xometry #3dprinting #cnc

Dont break this Fusion 360 rule! | Day 16 of Learn Fusion 360 in 30 Days (2023 Edition)

Product Design Online 2023-07-14 | New to Fusion 360? This is a brand new 2023 version of Day #16 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Learn HOW and WHY to fully define sketches in Autodesk Fusion 360. This concept is critical in making parametric designs that are adaptable and manageable.

TUTORIAL RESOURCES ➞ productdesignonline.com/d16
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 16 How to Fully Define Sketches in Autodesk Fusion 360
01:06 - Design Intent explained
02:14 - Adding sketch constraints in Autodesk Fusion 360
04:28 - Testing our design intent!
03:52 - How to reference other dimensions in Fusion 360
04:46 - Creating a second component with a different design intent
05:27 - Delete Fusion 360 Constraints
06:34 - Fusion 360 Sketching Tips
07:32 - Day 17 of 30 Days

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Automated Modeling Fusion 360. The future of CAD?

Product Design Online 2023-06-23 | Thanks to Xometry for sponsoring this video! Get $25 OFF your Xometry order of $150 or more: http://xometry.com/PDO
Automated Modeling allows designers to quickly generate new concepts using Generative AI technology by Autodesk. In this video, we'll discuss how Automated Modeling differs from Generative Design, how to get started with Automated modeling, and more!

Xometry's Fusion 360 add-in makes it super easy to get instant quotes without ever leaving Fusion 360. With many manufacturing methods, 100s of materials and finish types, it's never been more accessible and affordable to order prototypes or production-ready parts for your next project.

The Xometry add-in also provides real-time Design for Manufacturing (DFM) feedback based on your selected process and material. Quickly refine your design and resubmit to get new estimates and to finalize ideas based on your project's budget, lead time, and other requirements.

* Good through 7/31/23. Only for orders of $150 or more.

TIMESTAMPS
00:00 - Designing a Product with Generative AI
00:51 - Automated Modeling versus Generative Design
01:40 - How to Use Automated Modeling in Fusion 360
04:14 - Order on-demand 3D Printing and more with Xometry
04:43 - See the 3D Print Results
05:04 - Downsides to Automated Modeling
05:46 - Lattice Structures may be what you need
06:17 - Create Lattice Structures in Fusion 360
07:14 - How to order parts directly from Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#ai #automated #automation #Fusion360 #ProductDesignOnline

Day 15 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-06-09 | New to Fusion 360? This is a brand new 2023 version of Day #15 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d15
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 15 3D Model a Painters Tripod in Autodesk Fusion 360
00:30 - Creating a fully defined sketch
02:30 - Finding the centroid of the triangle by projecting geometry
03:45 - Fusion 360 Loft to a single point
0424 - Projecting geometry from the pyramid
06:00 - Create a construction axis in Autodesk Fusion 360
06:43 - Fusion 360 Pattern Compute types
07:13 - Copy and Paste Components in Autodesk Fusion 360
09:31 - Day 16 of Learn Fusion 360 in 30 Days

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

3D Scanning: 7 Tips for Unbeatable Results!

Product Design Online 2023-05-26 | This is a PDO x PrintLab collaboration for the Make:able 3D printing challenge. Learn more at makeablechallenge.com
Kevin's 3D Scanner: einstar.com

Resources: productdesignonline.com/scantips

SUBSCRIBE
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - 7 Essential Tips for 3D Scanning Success
00:07 - 1) Choose the best 3D scanner for your application
01:14 - 2) Tips to prep object surface before 3D scanning
01:51 - 3) Set up a controlled environment before 3D scanning
02:23 - 4) How reflective markers help with 3D scans
03:20 - 5) 3D Scan your object from multiple angles
03:52 - 6) Types of 3D scanner settings explained
05:27 - 7) Clean up 3D scan BEFORE converting to mesh
06:22 - Learn how to 3D scan for free with your smartphone

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3dscanning #3d

Day 14 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-05-05 | New to Fusion 360? This is a brand new 2023 version of Day #14 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d14
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 14 3D Model a Flathead Screwdriver in Autodesk Fusion 360
00:17 - Create components in Fusion 360
00:53 - Sketching the handle of the screwdriver
01:37 - Sketching the grip cutouts
02:13 - Circular Pattern Features in Fusion 360
03:23 - Fusion 360 Intersect Command explained
05:46 - Apply multiple Fillets in Fusion 360
08:13 - Creating the screwdriver shank
09:13 - Creating the screwdriver tip
11:13 - Modeling Mirror command in Autodesk Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Convert STL 3D Scans in Fusion 360

Product Design Online 2023-04-29 | This is a PDO x PrintLab collaboration for the Make:able 3D printing challenge. Learn more at makeablechallenge.com
3D Scanner: einstar.com

Resources: productdesignonline.com/organicscan

SUBSCRIBE
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Convert Mesh in Autodesk Fusion 360
00:10 - Einstar 3D Scanner
00:53 - Insert OBJ and STL Mesh Files in Autodesk Fusion 360
01:32 - Reduce Mesh Facets in Fusion 360
03:26 - Convert Mesh options
04:33 - Prismatic vs Organic in Fusion 360
05:10 - By Accuracy Type Fusion 360 Convert
07:07 - Finish T-spline and Combine Cut

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3dscanning #3d

Fusion 360 Components and Assemblies Explained | Day 13 of Learn Fusion 360 in 30 Days

Product Design Online 2023-04-23 | This is the 2023 version of Day #13 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d13
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 13 Fusion 360 Components and Assemblies Explained
00:23 - Key terminology explained
01:05 - Why components are required in Autodesk Fusion 360
01:53 - How to create New Components in Autodesk Fusion 360
03:28 - Don't use Create Components from Bodies in Fusion 360
04:05 - Standard vs Sheet Metal Components in Fusion 360
04:48 - Bottom-Up 3D Modeling Assemblies explained
05:16 - Top-Down 3D Modeling Assemblies explained
05:43 - Internal vs External Components in Fusion 360 explained
07:23 - How to Activate Components in Autodesk Fusion 360
07:41 - Paste vs Paste New explained in Autodesk Fusion 360
08:35 - Create Sub-assemblies in Fusion 360
09:17 - Isolate Components in Autodesk Fusion 360
10:00 - Benefits of Components in Autodesk Fusion 360
10:46 - Rules 1 and 2 from Fusion 360 Forums explained

—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 12 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-04-14 | New to Fusion 360? This is a brand new 2023 version of Day #12 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d12
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TIMESTAMPS
00:00 - Day 12 3D Model an Auger in Autodesk Fusion 360
00:17 - Pipe command in Autodesk Fusion 360
01:47 - Creating a Coil in Autodesk Fusion 360
03:06 - Create a Helix Sketch in Fusion 360 with Project to Surface
05:03 - Troubleshooting Sweep Errors in Fusion 360
06:00 - Offset plane in Autodesk Fusion 360
06:20 - Loft to a Point in Autodesk Fusion 360
06:31 - Fixing Loft Error in Autodesk Fusion 360
07:17 - Adding a 2 Direction Chamfer in Autodesk Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Secrets to build around a 3D scan in Fusion 360

Product Design Online 2023-04-10 | This is a PDO x PrintLab collaboration for the Make:able 3D printing challenge. Learn more at makeablechallenge.com
3D Scanner and Demo File: productdesignonline.com/headscan

3D Scanner: einstar.com

SUBSCRIBE
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Build around a 3D Scan in Fusion 360 with Mesh Section
00:10 - Einstar 3D Scanner
00:40 - Insert Mesh in Autodesk Fusion 360
01:57 - Mesh Section Sketch in Autodesk Fusion 360
04:30 - Fit curves to Mesh Section in Autodesk Fusion 360
06:17 - Turn sketches into surface bodies in Fusion 360
07:54 - Creating the Head Pointer for the Assistive Device Prototype
10:00 - Testing the Prototype Position in Real Time
10:27 - Summary of Mesh Section in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3dscanning

Fusion 360 for Woodworkers: The Add-in You Need!

Product Design Online 2023-03-22 | Save your valuable time by automating the tedious parts of parametric design! JoinerCAD is a Fusion 360 add-in that helps you quickly automate the component and panel creation, hardware, bill of materials, and more!

productdesignonline.com/joinercad

Checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

MORE FUSION 360 WOODWORKING
Playlist: http://bit.ly/learn-fusion360

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - JoinerCAD Fusion 360 Add-in Explained
01:30 - Turn a solid into a panel or skeleton body
02:34 - Miter the corners with the Miter feature
03:37 - Trim away excess materials
04:11 - Offset Faces in Fusion 360
05:03 - Quickly create panels and dividers
06:00 - Leverage existing hardware
06:49 - Apply materials to the 3D body in Fusion 360
07:52 - Create a BOM with JoinerCAD in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #woodworking

How to RENEW your Fusion 360 Personal Use license (2023)

Product Design Online 2023-03-04 | Fusion 360's free Personal Use or 'Hobbyist' license is now good for 3-years once renewed. You can renew your Fusion 360 Personal Use License for free by folowing the steps in this video.

SUPPORT PDO - Thanks for your support! :)
Patreon: patreon.com/productdesignonline
1-time Donation: http://paypal.me/productdesignonline

HELPFUL LINKS
1. How to Renew Startup License: https://autode.sk/2MQgLNF
2. Autodesk support for any renewal issues: https://autode.sk/3IS65dv

TIMESTAMPS
00:00 - How to Renew Fusion 360 for Free 2023
00:04 - Personal Use license is now good for 3 years
00:10 - When you can Renew Fusion 360 license
00:59 - Initate Renewal Process
01:20 - Important you must select the Download button
01:37 - Fusion 360 Installer Client can be deleted
01:41 - Restart your Fusion 360
01:55 - Wait up to 30 minutes if your license is already expired
02:00 - Must wait if using a Commercial license free trial

—
#Fusion360 #ProductDesignOnline @adskFusion

Day 11 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-02-24 | New to Fusion 360? This is a brand new 2023 version of Day #11 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d11
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 11 3D Model a Dog Bowl in Autodesk Fusion 360
00:33 - Sketch the side profile of dog bowl in Autodesk Fusion 360
02:42 - Surface Revovle the Dog Bowl Profile in Fusion 360
03:08 - Add Fillets to Dog Bowl in Fusion 360
04:38 - Turn Surface into Solid in Fusion 360
05:37 - Offset surfaces in Fusion 360
06:20 - Apply Appearances in Fusion 360
07:47 - Next Lesson Day 12

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 10 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-02-17 | New to Fusion 360? This is a brand new 2023 version of Day #10 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

TUTORIAL RESOURCES ➞ productdesignonline.com/d10
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 10 3D Model a Phone Case in Autodesk Fusion 360
00:33 - Open STEP file in Fusion 360
01:20 - Use Joints to lay the model flat
02:07 - Sketch around the outside of the phone model
04:07 - Sweep around the phone in Fusion 360
04:45 - Fill in the back of the phone case
06:28 - Chamfer the cutouts
07:20 - Offset faces for the charging port hole
08:11 - Custom Design on the back of phone case
08:25 - Next Lesson Day 11

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 9 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-01-27 | New to Fusion 360? This is a brand new 2023 version of Day #9 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TUTORIAL RESOURCES ➞ productdesignonline.com/d9
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 9 3D Model an LED Light Bulb in Autodesk Fusion 360
00:33 - Create a Cylinder Primitive in Autodesk Fusion 360
01:40 - Intersect lines in Autodesk Fusion 360
02:53 - Sphere Primitive in Autodesk Fusion 360
03:15 - Inside Fillets add Material in Fusion 360
03:47 - Add Appearances to specific parts in Fusion 360
04:27 - Edit Appearance Color in Fusion 360
05:16 - Fusion 360 Thread Command Explained
06:03 - Apply Chamfer in Autodesk Fusion 360
07:17 - Day 10 of Learn Fusion 360 in 30 Days

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Fusion 360 Best Practice: Modeling Fillets vs Sketch Fillets #fusion360 #autodesk

Product Design Online 2023-01-17 | When using @adskFusion use Modeling Fillets over Sketch Fillets. There are a few exceptions, including when creating sketch profiles for Lofts and Sweeps.
#autodeskfusion360

Day 8 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-01-16 | New to Fusion 360? This is a brand new 2023 version of Day #8 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

2023 Emboss Update (10:11 in the video). The new emboss tool works on more surfaces, but has also impacted how the Emboss tool worked when this tutorial was recorded.
SOLUTION:
1. Activate Emboss
2. Uncheck 'Tangnet Chain' in the Emboss dialog. * Very important. This must be done *
3. Select the 4 sketch profiles (two halves of the circle, two rectangles)
4. Switch to the 'Faces' selector in the Emboss Dialog
5. Select the top face of the doorstop (the largest face).
6. Hold the CMD Key (Mac) or CTRL Key (Windows) to select the remaining two top faces.
7. Select OK to confirm the Emboss.

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TUTORIAL RESOURCES ➞ productdesignonline.com/d8
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 8 3D Model a Rubber Doorstop in Autodesk Fusion 360
00:33 - Sketch the side profile Fusion 360
02:56 - Chamfer in Autodesk Fusion 360 explained
03:28 - Add Multiple Fillets at same time Fusion 360
04:16 - Mirror Sketches in Autodesk Fusion 360
05:29 - Sketching the Skirt for the Rubber Doorstop
08:00 - Offset faces in Autodesk Fusion 360
10:11 - NOTE See Pinned comment for Emboss Update
09:22 - Create Rubber Ridges on the top of Doorstop
11:12 - Fillet the Rubber Ridges on the Doorstop
11:31 - Next Lesson: Day 9

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 7 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2023-01-06 | New to Fusion 360? This is a brand new 2023 version of Day #7 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

TUTORIAL RESOURCES ➞ productdesignonline.com/d7
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 7 3D Model a Bike Handlebar Grip in Autodesk Fusion 360
00:33 - Create the Cylinder in Fusion 360
01:18 - How to Create Text in Autodesk Fusion 360
03:20 - Emboss or Deboss Text in Fusion 360
04:28 - Create the Grip Pattern with Rectangular Pattern feature
06:50 - Fix Shell Errors in Autodesk Fusion 360
07:31 - Combine multiple 3D bodies in Autodesk Fusion 360
08:40 - Fusion 360 Apply Appearance to Only Text
09:27 - Next Lesson: Day 8

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 6 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-12-02 | New to Fusion 360? This is a brand new 2023 version of Day #6 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

HOLE COMMAND SETTINGS ➞ productdesignonline.com/d6
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 6 Model a Hex Nut in Autodesk Fusion 360
00:27 - Circumscribed Polygon in Autodesk Fusion 360
02:13 - Custom Chamfer in Autodesk Fusion 360
04:20 - How to use the Hole command in Fusion 360
05:57 - Create a Midplane Construction plane in Fusion 360
06:16 - Mirror Chamfer using the Faces Options
06:40 - How to Edit Features in Fusion 360 Parametric Modeling
07:24 - Next Lesson - Day 7

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 5 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-11-19 | New to Fusion 360? This is a brand new 2023 version of Day #5 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

COMPUTE TYPES EXPLAINED ➞ productdesignonline.com/d5
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 5 Model an Ice Cube Tray in Autodesk Fusion 360
00:36 - Sketch the overall shape with a rectangle
01:21 - Create New Sketch on Planar Surface in Fusion 360
02:38 - How to Extrude Cut in Autodesk Fusion 360
03:29 - Add Taper Angle to Extrude in Fusion 360
04:19 - How to use Rectangular Pattern in Fusion 360
05:54 - How to Shell with more than one Face in Fusion 360
07:10 - Create a Midplane Construction Plane in Fusion 360
07:37 - Sketch the Lip of the Ice Cube Tray in Fusion 360
08:46 - Sweep the Lip of the Ice Cube Tray in Fusion 360
09:23 - Next Lesson in this course

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk

Day 4 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-11-12 | New to Fusion 360? This is a brand new 2023 version of Day #4 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

RESOURCES ➞ productdesignonline.com/d4
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 4 Model a Complex Glass Whiskey Bottle in Fusion 360
00:57 - Sketch Center Rectangle Fusion 360
01:23 - Apply Sketch Fillets in Autodesk Fusion 360
02:54 - Create Offset Planes in Fusion 360
03:56 - Create additional offset planes
04:38 - Create the remaining closed sketch profiles
06:17 - How to Loft in Autodesk Fusion 360
07:25 - Guide Rails vs Centerlines in Fusion 360
09:14 - Intersect Sketch Geometry
10:05 - Sketch Guide Rails in Fusion 360
11:15 - Final Fillets and Thread

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360school #fusion360tutorial #autodesk

Day 3 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-10-28 | New to Fusion 360? This is a brand new 2023 version of Day #3 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞ patreon.com/productdesignonline

REFERENCE IMAGE ➞ productdesignonline.com/d3
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 3 Model a Paperclip in Fusion 360
00:27 - Sketch the Paperclip Sweep Path in Fusion 360
02:55 - Check for fully-constrained sketch in Fusion 360
03:33 - Turn sketch entities into Construction entities
04:01 - Use Tangent Arcs in Autodesk Fusion 360
05:28 - Create a Sweep Sketch Profile in Autodesk Fusion 360
06:27 - Activate Solid Modeling Sweep feature in Fusion 360
07:03 - Chain Selection Fusion 360 explained

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360school #fusion360tutorial #autodesk

Learn Fusion 360 in 30 Days - Watch the full DAY 2 TODAY 🙂

Product Design Online 2022-10-21 | ...

Day 2 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-10-21 | New to Fusion 360? This is a brand new 2023 version of Day #2 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get the Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: bit.ly/30daysUpdated

REFERENCE IMAGE ➞ productdesignonline.com/d2
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Kevin's Patreon ➞ patreon.com/productdesignonline
Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Day 2 of Learn Fusion 360 in 30 Days
00:15 - Save file in 'the cloud' in Fusion 360
00:56 - Create New Component in Fusion 360
01:26 - Insert Reference Image in Fusion 360
02:15 - Scale Reference Image (Canvas) in Fusion 360
04:11 - How to Sketch in Autodesk Fusion 360
05:23 - How to Use Fit Point Spline in Autodesk Fusion 360
08:10 - How to Revolve in Fusion 360
09:20 - How to Add Rounded Edges in Fusion 360
10:34 - How to Make a Hollow Body in Fusion 360
11:00 - Apply the Appearance of Glass in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Day 1 of Learn Fusion 360 in 30 Days for Complete Beginners! - 2023 EDITION

Product Design Online 2022-07-01 | New to Fusion 360? This is a brand new 2023 version of Day #1 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course on the internet! Get the Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course (on YouTube): bit.ly/30daysUpdated

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/d1
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Kevin's Patreon ➞ patreon.com/productdesignonline
Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Fusion 360 Beginner Tutorial 2022 User Interface
00:52 - Restore Default Settings Fusion 360
01:35 - Set document units Fusion 360
02:09 - Create a New Component Fusion 360
02:40 - How to Sketch in Fusion 360
04:46 - Create 3D objects in Fusion 360
06:02 - How to Save in Autodesk Fusion 360
08:28 - Rectangular Pattern Fusion 360
09:42 - How to Hollow Body in Fusion 360
12:25 - Round Edges in Fusion 360 using Fillet
12:39 - How to Save Versions of Fusion 360 File

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Global Parameters in Fusion 360 | Explained in 5 minutes

Product Design Online 2022-06-10 | 1. Learn about Global Parameters in Fusion 360 ➞ productdesignonline.com/global
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Channel Membership ➞ youtube.com/channel/UCooViVfi0DaWk_eqxIXXiOQ/join
3. My affiliate store ➞ http://bit.ly/amazonpdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

KEVIN’S FAV 3D PRINTERS
1. Pro ➞ bit.ly/kevins-printer
2. Starter ➞ http://bit.ly/prusa3dp

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Global Parameters Fusion 360 explained
00:10 - What are User Parameters?
00:25 - Create Global Parameters File in Fusion 360
00:41 - Open parameters window Fusion 360
01:26 - Favorite parameters Fusion 360
01:52 - Derive parameters in Fusion 360
03:05 - IMPORTANT must favorite derived parameters
03:20 - Insert Derive Fusion 360 command explained
04:07 - Testing Global Parameters in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Surface Modeling in Fusion 360 | Intermediate Only

Product Design Online 2022-05-21 | Download reference image: productdesignonline.com/knife
IMPORTANT: This lesson is intended for intermediate users. Prerequisites: have a working knowledge of Fusion 360 sketches and solid modeling; some basic surface modeling is ideal.

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/knife
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Surface Modeling Knife in Fusion 360
01:00 - Setting up sketch geometry
02:21 - How to surface model Fusion 360
02:40 - Extrude a starting surface
03:20 - How to Surface Loft in Fusion 360
04:30 - Extend a surface when surface modeling
06:03 - How to fix incorrect surfaces
07:27 - Trim away excess surfaces Fusion 360
08:23 - Sharpening the knife edge with Surface Sweep
09:10 - Patch and Stitch the surfaces
10:00 - Final tricks for surface modeling

—
#Fusion360 #ProductDesignOnline #surface

4 Ways to Export to DXF in Fusion 360

Product Design Online 2022-04-15 | Learn the CORRECT way to export to DXF from Fusion 360 when preparing your file for laser cutting. We'll look at the pros and cons of the four ways to export to DXF, as well as the best way to Project your desired geometry into a single sketch.

Visit SendCutSend.com for FAST and affordable custom laser cut parts. Save 15% using SCSPDO15 at checkout (max discount of $1,000).

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/sm3
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - 4 Ways to Save DXF from Fusion 360
00:14 - 1) Sketch Save as DXF from Fusion 360 Sketch
00:58 - Project geometry into a single sketch
02:09 - Check your DXF file in Fusion 360 or a graphics program
02:40 - 2) Export Flat Pattern as DXF from Sheet Metal Component
03:00 - 3) Export Sheet as DXF from 2D Manufacture Drawing
03:27 - 4) Export DXF from the File Export Menu
03:57 - Summary: Best ways to get DXF from Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

3D Scanning for FREE with your phone

Product Design Online 2022-04-02 | Try free 3D Scanning with your smartphone. KIRI iPhone - apple.co/3tZVczV
KIRI Android: bit.ly/AndroidKiri2 (re-launched March 2023)

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/3dscan
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

3D SCAN TOOLS
Chalk for coloring objects: geni.us/sidechalk
Craft TP Rolls: geni.us/tprolls
Turntable (for Lidar scanning): geni.us/noturntable
LED Lights (that Kevin has): geni.us/LEDPanels
Softbox Photo Lights: geni.us/softBox

ADVANCED 3D SCANNERS
Revopoint: geni.us/revopoint3D
Einscan Pro: geni.us/pro3DScanner

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

Photogrammetry is the most accessible 3D scanning method to use with a smartphone as it simply requires any phone that can capture images. The accompanying software can leverage complex measuring algorithms to stitch the photographs together, outputting a 3D model.

We recommend using the KIRI Engine app for 3D scanning with your smartphone. KIRI Engine is available for both iPhone and Android phones.

KIRI Engine uses cloud computing to process your 3D scan. Cloud computing will provide better results while also allowing you to continue to 3D scan additional objects. This is also the only smartphone photogrammetry app that we’ve found to consistently produced better results than Lidar 3D scanning with an iPad Pro.

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - 5 tips for 3D scanning with your smartphone
00:12 - Tip 1
00:43 - Tip 2
01:01 - Tip 3
01:56 - Tip 4
02:31 - Tip 5
04:14 - Open 3D Scan in Autodesk Fusion 360
05:00 - Clean up 3D scan data in Autodesk Fusion 360
07:30 - Repair 3D scan mesh data in Fusion 360

—
#3dscan #3dprint #ProductDesignOnline #Fusion360

Intro to SHEET METAL in Fusion 360 - Sheet Metal Beginners Start Here!

Product Design Online 2022-03-18 | Learn Fusion 360 Sheet Metal in 20 minutes, with this crash-course for beginners. Thanks to our wonderful friends at SendCutSend.com for providing FAST and affordable custom laser cut parts. Save 15% using SCSPDO15 at checkout: shop.sendcutsend.com/pdo

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/sm2
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - How to use Fusion 360 for Sheet Metal Design
03:32 - Create sheet metal flanges in Fusion 360
06:53 - Height Datum and Bench Position
10:04 - Fusion 360 Unfold vs Create Flat Pattern
10:28 - How to unfold a part in Autodesk Fusion 360
12:26 - Fusion 360 Geometry Pattern feature
14:00 - How to create custom Sheet Metal Rule in Fusion 360
19:25 - How to Create Flat Pattern in Fusion 360
21:12 - Fusion 360 Export Flat Pattern as DXF

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #SendCutSend

Make your own 3D Printed Phone Case | Fusion 360 Tutorial

Product Design Online 2022-03-12 | Tutorial links & more ➞ productdesignonline.com/tpu
My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - 3D Print Phone Case in TPU
00:42 - Fusion 360 Import File
01:58 - Design custom phone case in Fusion 360
06:43 - Create Volumetric Lattice in Fusion 360
10:33 - Tips for 3D printing with TPU
12:20 - Cura Support Z distance setting explained

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

The CORRECT Way: User Parameters in Fusion 360

Product Design Online 2022-02-26 | Advanced Fusion 360 playlist ➞bit.ly/advFusion360
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/parameters
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - User Parameters in Autodesk Fusion 360
00:10 - Min and Max parameters explained with Fusion 360
01:39 - Quick parameter secret explained in Fusion 360
02:09 - User parameters vs model parameters in Fusion 360
02:52 - Parameter rounding trick explained in Fusion 360
04:17 - Three core workflows to learn next!

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

New Feature Replaces Contact Sets in Fusion 360 (sorta)

Product Design Online 2022-01-28 | Automata designs can now be fully animated in Autodesk Fusion 360 using the Tangent Relationship feature. The Tangent Relationship feature performs significantly better than Contact Sets. In this lesson, learn how to apply Tangent Relationships and test the motion of your design.

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Kevin's Patreon ➞ patreon.com/productdesignonline
Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/automata
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - How to use Tangent Relationship in Fusion 360
00:20 - What are Contact Sets in Fusion 360?
00:32 - Issues with Contact Sets in Fusion 360
01:12 - Activate Tangent Relationship in Fusion 360
02:15 - How to Apply Tangent Relationship in Fusion 360
02:39 - Animate entire model in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #Automata

Import and Edit STL Files in Fusion 360 2023

Product Design Online 2022-01-22 | Import and Edit STL files in Fusion 360 on the free Personal Use license. Learn how to remove those mesh triangles (facets) using 3 core techniques. These Edit STL techniques range from beginner to advanced concepts, all of which are covered in this lesson.

Thanks to Thangs.com for helping us create this free learning resource.

TUTORIAL RESOURCES
1. Demo Files ➞ bit.ly/STLfiles
2. Checklist for F360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
Kevin's Patreon ➞ patreon.com/productdesignonline
Buy Kevin a Coffee ➞ buymeacoffee.com/pdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Import and Edit STL files in Fusion 360
00:30 - Import STL in Fusion 360
01:25 - Convert Mesh to STL in Fusion 360
02:51 - One: Self Repair mesh facets in Fusion 360
03:40 - Two: Fix simple mesh surfaces
07:03 - Three: Fix complex mesh surfaces
10:37 - Stitch surface bodies in Fusion 360
12:08 - How to version control STL files

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3dprinting

Create 3D Instructions with Fusion 360 + Cadasio

Product Design Online 2022-01-15 | More Fusion 360 add-in videos: bit.ly/F360addins
Use the Cadasio Fusion 360 add-in to create 3D instructions, product assemblies, and advanced animations. Bring your manuals to life.
The world is in 3D, so it makes sense your instructions are too.

TUTORIAL RESOURCES
1. All Downloads and Files ➞ bit.ly/CadasioFusion360
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - What is Cadasio?
00:30 - Cadasio add-in for Fusion 360
01:11 - Define scene settings in Cadasio
02:15 - Create a step in Cadasio
02:37 - Create text and labels in Cadasio
04:15 - Create movement and animations in Cadasio
05:57 - Rotate object in Cadasio
07:31 - Update Fusion 360 project for Cadasio
08:01 - Cadasio publish options

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #Cadasio

Fusion 360 - How to Cut One Body From Another

Product Design Online 2021-12-14 | Next, make some 3D printed molds: youtu.be/KisgYeYaagI
Grab all the free STL demo files below.

Special thanks to Creality Cloud for sponsoring the December 3D modeling challenge. Prizes and theme here: bit.ly/Dec3DChallenge

STL TEMPLATES
Hinged Gift Box ➞ bit.ly/presentTemplate
Hinged Xmas Tree ➞ bit.ly/treeTemplate

STL HOLLOW VERSION
Hinged Gift Box ➞ bit.ly/presentHollow
Hinged Xmas Tree ➞ bit.ly/treeHollow

GREEN FILAMENT
Inland PETG Translucent ➞ geni.us/inlandPETG

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/3D-printing-playlist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Surprise Egg Inspired 3D Printing Project
00:26 - Cut out mesh STL from body in Fusion 360
01:05 - Delete faces in Fusion 360
02:39 - Split STL mesh in Fusion 360
03:47 - Combine Cut a mesh body in Fusion 360
05:44 - Download STL files for 3D modeling challenge

Surprise Egg Model
The original surprise eggs were created by agepbiz. Check out his work: youtube.com/user/agepbiz

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.

#Fusion360 #ProductDesignOnline

3D Printing Basics - NOT as easy as you think!

Product Design Online 2021-12-05 | Special thanks to Micro Center for helping me produce this educational video on 3D Printing! You can support my channel by checking out their 3D printers and filament below:
Free 128GB MicroSD Card ➞ https://micro.center/32c1fc
Micro Center’s 3D Printers ➞ https://micro.center/798663
Micro Center’s Amazon Filament ➞ https://micro.center/e33223

RECOMMENDED 3D PRINTERS
Beginner [sub $200] ➞ geni.us/kingroon3d
Beginner [sub $300] ➞ geni.us/Ender3proV2
Beginner [sub $400] ➞ geni.us/magicianx
Int. [sub $800] ➞ http://bit.ly/prusa3dp
Prosumer [Kevin's] ➞ bit.ly/kevins-printer

Need help? 3D Printer Advice ➞ bit.ly/3DPrinterComparison

RECOMMENDED FILAMENT
↓ 1.75MM ↓
PLA ➞ geni.us/InlandPLA
ABS ➞ geni.us/InlandABS
PETG ➞ geni.us/InlandPETG
↓ 3MM ↓
ABS ➞ geni.us/InlandABS3mm
PLA ➞ geni.us/Inland3mm
PETG ➞ geni.us/InlandPETG3mm

READY TO LEARN F360?
1. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist
2. Learn faster with my courses ➞ productdesignonline.com

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - 3D printing explained video
00:20 - FDM 3D Printing explained
00:41 - What is 3D printer hotend?
01:14 - What is 3D printer filament?
01:38 - Additive Manufacturing vs Subtractive Manufacturing
02:00 - How does a 3D printer create an object
03:40 - What is 3D printer infill?
04:10 - What stores sell 3D printers?
05:11 - 3D printer extruder fans explained
05:35 - What is 3D printer support material?
06:11 - Summary of 3D printing
06:38 - Can you 3D print a 3D printer?

—
Disclaimer:
This video description contains affiliate links. At no extra cost to you, I may get a small commission if you decide to make a purchase through my links.
—
#3DPrint #3DPrinting #ProductDesignOnline

Find Unconstrained Elements in Fusion 360

Product Design Online 2021-11-19 | Don't have a red lock icon? This video explains where to find a list of unconstrained sketch elements in Autodesk Fusion 360. Locating unconstrained elements in Fusion 360 can be very frustrating. Particularly, if your sketch objects all appear to have black lines, which means they're fully defined. This secret trick will help you track down those pesky unconstrained sketch entities.

Use this Text Command:
Sketch.ShowUnderconstrained

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/commandLine
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Find a list of unconstrained sketch elements in Fusion 360
00:16 - Red Lock icon in Fusion 360
00:54 - Fusion 360 Command Line
01:28 - Highlight unconstrained objects in Fusion 360
02:13 - About the Fusion 360 Command Line

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Assemble Imported Models in Fusion 360

Product Design Online 2021-11-05 | Learn how to assemble imported models and CAD data in Autodesk Fusion 360. Create sub-assemblies, Rigid Groups, As-Built Joints, and more. Follow these best practices for the best performance and efficient workflows.

➞Ender 3 3D Printer: geni.us/3dprinter
➞ CAD Mouse: geni.us/spacemouse
➞ Fusion 360 Courses: bit.ly/JoinPDOAcademy
➞ PDO Community: http://bit.ly/PDOCommunity

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - How to Assemble Imported Parts in Autodesk Fusion 360
00:52 - Turn on the parametric timeline in Fusion 360
02:03 - How to create a sub-assembly in Fusion 360
03:38 - What is Rigid Group in Fusion 360? (explained)
04:23 - What is Capture Position in Fusion 360? (explained)
05:31 - How to Ground a component in Fusion 360
07:14 - Assembly structure and considerations in Fusion 360
09:10 - Use a Motion Link to connect Joints in Fusion 360
12:12 - Creating slider joints in Fusion 360
14:39 - Create working X, Y, and Z gantry in Fusion 360

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #CAD

Fusion 360 User Interface Tutorial | 2024 Interface

Product Design Online 2021-10-22 | Explore the Fusion 360 interface 2023 to learn where all the design tools are located.
FUSION 360 RESOURCES
My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

_______________________
JOIN THE PDO COMMUNITY
➞ http://bit.ly/PDO-Forum

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Fusion 360 user interface sections explained
00:05 - 1. Data Panel
00:26 - 2. Application Bar
01:34 - 3. Toolbar
02:18 - 4. Canvas
02:27 - 5. Browser
02:51 - 6. ViewCube
03:19 - 7. Marking Menu
03:39 - 8. Navigation Bar & Display Settings
04:00 - 9. Parametric Timeline

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Cut List and Part List in Fusion 360

Product Design Online 2021-10-15 | Automate your parts and cutting list! Learn how to create woodworking instructions with Fusion 360 and the OpenBOM add-in. This tutorial covers how to quickly generate dimensions for cutting lists, how to create a 2D Drawing, and some tips and tricks to make your PDF woodworking instructions.

Join this channel to get access to perks:
youtube.com/channel/UCooViVfi0DaWk_eqxIXXiOQ/join

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

TUTORIAL RESOURCES
1. Demo File ➞ a360.co/3AMKHQK
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

_______________________
JOIN THE PDO COMMUNITY
➞ http://bit.ly/PDO-Forum

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - How to make woodworking instructions with Fusion 360
00:31 - OpenBOM Fusion 360 add-in explained
01:19 - Create a template for your parts list
03:07 - Physical Materials vs Appearances in Fusion 360
04:35 - Applying part numbers in Fusion 360
05:30 - Generate a Cutting list in Fusion 360
06:09 - Create a Fusion 360 Drawing
07:06 - Create Projected View in Fusion 360 Drawing
08:29 - Create drawing sheets in Autodesk Fusion 360
08:57 - Automate parts and cutting list in Fusion 360
09:20 - Change Fuson 360 dimensions to fractional
09:50 - Updating a parts list in Fusion 360
11:33 - Numbering orthographic and isometric views
12:44 - Export Fusion 360 drawing as PDF

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline

Fusion 360: Print-in-place project for beginners

Product Design Online 2021-09-25 | Grab the free file: bit.ly/gyroscopicSTL
Shoutout to Thangs.com for sponsoring the September 3D modeling challenge. Up for a challenge? ➞ bit.ly/Sept3DChallenge

Print-in-place 3D prints are super fun! Learn how to design a gyroscopic keychain in Autodesk Fusion 360, using only two commands!

This design includes two user parameters that drive the thickness and clearance of the design.

TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/challenge
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist

SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp

_______________________
JOIN THE PDO COMMUNITY
PDO Forum ➞ http://bit.ly/PDO-Forum

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now

TIMESTAMPS
00:00 - Gyroscopic fidget keychain in Fusion 360
00:26 - How to create user parameters in Fusion 360
01:32 - How this prints in place without supports
03:05 - Offset sketch geometry in Fusion 360
05:00 - Fully define sketch profile in Fusion 360
05:20 - Revolve sketch in Fusion 360
05:37 - Testing the user parameters
06:05 - Thangs.com explained
06:37 - Product Design Online 3D modeling challenges

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3Dprint