CDV742 Dosimeter Dissection Skinner Innovations 2017-12-12 | Just for fun I took apart a Bendix CDV 742 to see what was inside and how it went together
Fenwal heat detector test demo 5 Skinner Innovations 2017-12-06 | Using the HST heat detector tester***noisy area! turn sound down!
Fenwal heat detector test demo 4 Skinner Innovations 2017-12-06 | Using the HST heat detector tester***noisy area! turn sound down!
Fenwal heat detector test demo 3 Skinner Innovations 2017-12-06 | Using the HST heat detector tester***noisy area! turn sound down!
Fenwal heat detector test demo 2 Skinner Innovations 2017-12-06 | Using the HST heat detector tester***noisy area! turn sound down!
Fenwal heat detector test demo 1 Skinner Innovations 2017-12-06 | An HST user learning how to position the heat detector tester to fit in a tight area***noisy area! turn sound down!!
HST Fenwal DAF Heat Test Skinner Innovations 2017-12-06 | This is loud! Turn sound down!! Testing a Fenwal probe Heat Detector at 25+ feet
HST Testing Wing / Dynalec IC/J Heat Detector Skinner Innovations 2015-05-26 | Using HST Heat Detector Tester to test a 105 degree F WING Corporation / Dynalec heat detector.Tags:IC/SM Alarm SwitchboardNAVSEA number 0965-049-9010Design Specification MIL-A-17196IC/SM-4 3448-120IC/SM-10 3455-210IC/SM-20 3455-220IC/SM-30 3455-230IC/SM-40 3455-240IC/SM-50 3455-250IC/SM-60 3455-260IC/SM-80 3455-280IC/SM-100 3455-100IC/SM-120 3455-120IC/J Thermostatic Switch Fixed Heat DetectorIC/W Water Switch3464 Smoke DetectorDesign Spec: MIL-S-16032IC/J 105 2805.1 9N5930-00-565-5153IC/J 125 2806.1 9N5930-00-565-5154IC/J 150 2807.1 9N5930-00-565-5155NAVSEA DRAWING NUMBER 815-1197118Wing Corp 215 Highland Ave Westmont New Jersey 08108609-854-2225
HST Fenwal Heat Detector Tester - Standard Heating Skinner Innovations 2015-05-26 | Testing a 190 degree F Fenwal 27121 Rate Compensated Heat Detector using HST Series heat detector tester model HST-A-ALOFenwal Rate compensation heat detectors are available with temperature settings from 140 to 750 degrees F.Rate compensation, Rate compensated, or Rate Anticipation heat detectors have a "virtual" set point which varies with temp rate of rise.The HST applies heat to the detector in a way that makes it possible to determine if the detectors set point has changed significantly. A shift in the detectors set point can occur because of overheating or other physical damage to the heat detector.
Elgin 291 part2 Skinner Innovations 2015-05-24 | Elgin 291 after balance staff replacementruns much better. I am surprised that this cleaned up as well as it did.
HST Detector Tester with Inspection Poles Skinner Innovations 2015-05-08 | Demonstration of the HST Series Heat Detector Tester using industry standard inspection poles.The heat detector in this demo is a Fenwal 27121 140 degree rate compensated heat detector
Skinner Pastor TM-1S Skinner Innovations 2015-05-06 | HST Series Heat Detector Tester model HST-P-120. The video shows the HST Series Heat Detector Tester being used to test a Pastor TM-1S heat detector. Pastor Heat Detectors are probe type detector and are available in temp settings and in other probe lengths. Pastor TM-1S Fixed Temperature Fire Detector. The HST Series heat detector tester works with all probe type heat detectors.
Elgin 291 part1 Skinner Innovations 2015-04-30 | Eligin 291 16S year about 1918This is in very rough condition lots of rust, stripped plate screw, broken dial foot, cracked pallet jewel. Just for fun I decided to see how well it cleaned up and ran. I think it would actually do pretty well if I could find where the balance is binding up. Seems to improve when placed face down.
HST Series Heat Detector Tester-Assembly Skinner Innovations 2015-02-02 | Assembly of the HST Series Heat Detector Tester for probe type, fire alarm heat detectors, thermal switches, rate compensation, rate of rise, and fixed temperature Heat detectors. Video shows how to properly connect battery and HST test head to fire alarm inspection poles.
Rate Compensation Heat Detector Test Skinner Innovations 2015-01-30 | Testing a 140 degree F Fenwal 27121 Rate Compensated Heat Detector using HST Series heat detector tester model HST-A-ALO-CFenwal Rate compensation heat detectors are available with temperature settings from 140 to 725 degrees F.Rate compensation, Rate compensated, or Rate Anticipation heat detectors have a "virtual" set point which varies with temp rate of rise.The HST applies heat to the detector in a way that makes it possible to determine if the detectors set point has changed significantly. A shift in the detectors set point can occur because of overheating or other physical damage to the heat detector.Rate Compensation Verification
Heat Detector Identification -Skinner Innovations Skinner Innovations 2015-01-27 | Skinner Innovations Education SeriesIdentification of manufacturer, model, and set point of Fenwal DAF Detect A Fire, Fenwal 17343, Fenwal 27121, Thermotech 302, rate compensated, rate of rise and fixed temperature probe type heat detectorsProbe type heat detectors are commonly used in industrial applications and are especially useful for high temperature and hazardous areas. Skinner Innovations manufactures the HST Series Heat Detector Tester which is used to perform heat detector testing / fire alarm inspections on this type of heat detector
